東測 List of Products and Services

The "3-axis load cell" measures simultaneously in three axes—X-axis, Y-axis, and Z-axis (tension and compression)—which are mutually orthogonal. Each axis is composed of a full bridge, and the measurement signals are output independently. The housing is made of aluminum alloy for the small low-capacity type and stainless steel for the high-capacity large type, enhancing rigidity. It achieves excellent linearity and minimal hysteresis throughout the entire allowable range. Each measurement axis has a structure that minimizes sensitivity to interference, known as "crosstalk," caused by loads on other axes, ensuring high reliability. 【Features】 ■ We handle 3-axis load cells from Michigan Scientific and Interface. ■ A wide range of lineup ■ Available for rental *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other electronic measuring instruments

The "SHORT S10M-T-TC7*T-LH" is a compact slip ring that incorporates a 7-channel amplifier for thermocouples. Its total length is 39.4mm, equivalent to the S10(M)/15K09/LHV, which supports high speeds of 20,000rpm. It has become even easier to install and handle compared to separate assemblies of slip rings and rotating amplifiers. 【Features】 ■ 7-channel amplifier integrated into a slip ring that supports high speeds of 20,000rpm ■ Even more compact and lightweight with a slim housing base ■ Total length is 39.4mm, equivalent to the S10(M)/15K09/LHV, which supports high speeds of 20,000rpm ■ Rotor diameter is the same outer diameter as our M-type rotor (φ50.8mm) *For more details, please refer to the PDF document or feel free to contact us.

• Slip Ring
• Other Connectors

The "S4/D, S6/D, S8/D, S10/D" are slip rings for digital signals with low contact resistance and low noise, featuring a gold alloy ring and silver alloy brush. They have the same dimensions as the standard S series (S4, S6, S8, S10). Internal wiring is compatible with Gbps using twisted lead wires. Upon request, we can also deliver with dedicated cable connectors, so please feel free to consult us. 【Features】 ■ Low contact resistance and low noise with gold alloy ring and silver alloy brush ■ Internal wiring compatible with Gbps using twisted lead wires ■ Same dimensions as the standard S series (S4, S6, S8, S10) ■ Supports high-speed rotation up to 12,000 rpm ■ Made of robust stainless steel case *For more details, please refer to the PDF document or feel free to contact us.

• Slip Ring
• Other Connectors

The "Wheel 6-Component Force Sensor" can measure the forces and moments transmitted from the road to the wheel as wheel 6-component forces by replacing the wheel part of the vehicle with a ring-shaped 6-component force sensor. We offer a variety of models that cater not only to standard passenger cars but also to large buses and trucks, as well as small-diameter, high-capacity forklifts and tractors. *The integration of a high-capacity 6-component force sensor into small-diameter wheels is possible using a custom mounting adapter. Thanks to its simple structure, installation on the vehicle is also easy. 【Features】 ■ All models are IP67 waterproof ■ Compensation temperature range from -40°C to 120°C, suitable for cold and high-temperature testing ■ Made of stainless steel, robust yet lightweight design ■ The titanium model is lightweight with a mass of 1.5 kg *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other electronic measuring instruments

Our slip rings are designed to accommodate the low voltages of sensor signals due to their low noise characteristics and are also excellent in heat resistance. They are actively used in environments that require real-time temperature measurement and heating. 【Features】 - A wide lineup from low-speed to high-speed rotation - Available in both hollow integrated and separate types - A wide operating temperature range of -40 to 120°C - Increased lifespan with appropriate product selection - Quick response to urgent requests with short delivery times - Custom solutions available according to installation environment Additionally, we provide a lineup that meets various measurement needs such as temperature measurement of rotating bodies, torque measurement, and vibration/acceleration measurement in experimental development sites of various industrial equipment, as well as in the transportation equipment industries including automotive, railway, aerospace, and marine. To achieve high-quality measurements, we also focus on pre-meeting consultations and aftercare. ★ We are currently offering materials that explain product and thermocouple measurements for rotating bodies. ★ * The explanatory materials can be viewed via "PDF Download." Please feel free to contact us with any inquiries.

• Other semiconductor manufacturing equipment

This is an introduction to the hollow separate type slip ring (for measurement signals and low power). 【Features and Specifications】 Compact, lightweight, high-speed rotation compatible Long lifespan Number of poles: 2 to 24 poles Inner diameter: φ12.75, φ25.45, φ38.15, φ50.90 Can also be introduced into medical device manufacturing lines. *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• others

This is an introduction to the integrated hollow shaft slip ring (for measurement signals and low power). 【Features and Specifications】 Compact, lightweight, high-speed rotation compatible Long lifespan Number of poles: 2 to 24 poles, Inner diameters: φ12.75, φ25.50, φ38.20, φ50.90, Can also be introduced into medical device manufacturing lines. *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• others

Our company specializes in slip rings that are compatible with high-speed rotation, compact, lightweight, and low-noise. We provide a lineup that meets a wide variety of measurement needs, such as temperature measurement of rotating bodies, torque measurement, and vibration/acceleration measurement, in the transportation equipment industry, including automotive, railway, aviation, and marine, as well as in various industrial equipment research and development sites. To achieve high-quality measurements, we also focus on pre-meeting consultations and aftercare. ★ We are currently offering a condensed document of our know-how ★ It provides detailed explanations from the basics of slip rings to troubleshooting methods. 【Contents (excerpt)】 ■ Basic knowledge and types of slip rings that you may be hesitant to ask about ■ Slip rings: compact and lightweight standard ■ Slip rings: high-speed and vibration noise countermeasures ■ Enabling multi-point simultaneous measurement! Slip ring SR20M-GEVL ■ Up to 20,000 rpm, long lifespan slip ring S10/15K09/LHV ■ Troubleshooting: thermocouple measurement section and strain gauge measurement section You can view the document immediately by clicking the download button.

• Other semiconductor manufacturing equipment

The "Slip Ring S Type / SR Type" is effective for signal transmission from a rotating body to a fixed side and for supplying power to transducers on the rotating body. It has extremely low noise compared to conventional products and can accommodate multiple poles. This is an axial slip ring that resolves issues commonly associated with contact types, such as wear, and limitations on the number of transmission circuits in non-contact types. 【Features】 - Compact and lightweight, achieving extremely low noise - Excellent seismic resistance - Easy connection and wiring of lead wires - Supports connection circuits from 4 poles to 36 poles *For detailed specifications, please download the catalog or contact us directly.

• Other machine elements

Our company specializes in slip rings that are compatible with high-speed rotation, compact, lightweight, and low-noise. We offer a lineup that meets the high-speed rotation needs for temperature measurement, torque measurement, and gap measurement in the automotive industry's experimental development field. To achieve high-quality measurements, we also focus on pre-meetings and aftercare.

• Power Transmission Equipment
• Slip Ring

A slip ring is a connector that plays the role of transmitting power and measurement signals to a rotating body. There is a shaft-end type that is mounted on the end face of the rotating shaft, which is a compact and lightweight slip ring. In cases where a clean environment is required, such as in pharmaceutical and food manufacturing, wear debris is a concern. This slip ring is sealed in a stainless steel case, which prevents wear debris from escaping outside the case. Number of poles: 4 to 36 poles Rotation: Standard 6000 rpm (4 to 10 poles), 4000 rpm (20 poles), 2400 rpm (36 poles) ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting micro-signals such as stress, axial force, temperature, and vibration from the rotating body to the fixed side, as well as supplying power from the fixed side to transducers located on the rotating side. Typically, contact-type slip rings, where the rotating ring and brushes are in contact, are widely used.

• Slip Ring
• Other Connectors

Compact and lightweight standard slip ring. It is an end-type that attaches to the end face of a rotating shaft. Number of poles: 4 to 36 poles Rotation: Standard 6000 rpm (4 to 10 poles), 4000 rpm (20 poles), 2400 rpm (36 poles) ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as a lead wire for transmitting micro-signals such as stress, axial force, temperature, and vibration from the rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. Typically, contact-type slip rings, where the rotating ring makes contact with brushes, are widely used.

• Slip Ring
• Other Connectors

Compact and lightweight standard slip ring. It is an end-type that attaches to the end face of a rotating shaft. Number of poles: 4 to 36 poles Rotation: Standard 6000 rpm (4 to 10 poles), 4000 rpm (20 poles), 2400 rpm (36 poles) ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as a lead wire for transmitting micro-signals such as stress, axial force, temperature, and vibration from the rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. Typically, contact-type slip rings, where the rotating ring makes contact with brushes, are widely used.

• Slip Ring
• Other Connectors

12,000 rpm compatible Slip ring for transmitting small electrical signals such as stress, vibration, and temperature measurements Number of poles: 4 poles Compact and lightweight.

• Power Transmission Equipment
• Slip Ring

Supports 10,000 rpm Simultaneous measurement of stress, vibration, temperature, etc. Number of poles: 10 poles Compact and lightweight.

• Other measurement, recording and measuring instruments
• Power Transmission Equipment
• Slip Ring

Supports 10,000 rpm Simultaneous measurement of stress, vibration, temperature, etc. Number of poles: 10 poles Compact and lightweight.

• Other measurement, recording and measuring instruments
• Power Transmission Equipment
• Slip Ring

20 poles, 15,000 rpm! Slip ring for measurement signals ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting minute measurement signals such as stress, axial force, temperature, and vibration from a rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. For more details, please refer to the catalog or contact us.

• Slip Ring
• Other Connectors

20 poles, 15,000 rpm! Slip ring for measurement signals ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting small measurement signals such as stress, axial force, temperature, and vibration from a rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. For more details, please refer to the catalog or contact us.

• Slip Ring
• Other Connectors

20 poles, 15,000 rpm! Slip ring for measurement signals ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting small measurement signals such as stress, axial force, temperature, and vibration from a rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. For more details, please refer to the catalog or contact us.

• Slip Ring
• Other Connectors

10 poles, 20,000 rpm! Long lifespan! Slip ring for measurement signals ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting micro-signals such as stress, axial force, temperature, and vibration from the rotating body to the stationary side, as well as supplying power from the stationary side to transducers located on the rotating side. For more details, please refer to the catalog or contact us.

• Slip Ring
• Other Connectors

Our company specializes in slip rings that are compatible with high-speed rotation, compact, lightweight, and low-noise. We offer a lineup that meets the needs of high-speed rotation (20,000 rpm) for temperature measurement, torque measurement, and gap measurement in the experimental development field of the automotive industry. To achieve high-quality measurements, we also focus on pre-meetings and aftercare. ★Currently, we are also offering materials on our condensed wiring methods★ 【Content of the materials】 ■Reducing noise and drift ■Wiring to the slip ring ■Soldering of K-type thermocouples ■Reinforcement of wiring to the slip ring The materials can be viewed immediately by clicking the download button.

• Slip Ring
• Other Connectors

This is a high-grade slip ring for measuring micro signals. Features: - Multi-pole: 45 poles, 60 poles - Supports 4,000 rpm - Long lifespan - Connectors used for both rotor and stator - Dustproof treatment - Repairable - Waterproof options available *If you are interested, you can view the catalog from the download button below. *For more details, please feel free to consult or contact us.

• Slip Ring
• Other Connectors

Shortening of length in the axial direction. - Our standard model S4 --33mm → SHORT S4/T --22mm - Our standard model S6 --36mm → SHORT S6/T --25mm - Our standard model S8 --41mm → SHORT S8/T --27mm Lightweight by using aluminum for the stator material. - Our standard model S4 --103g → SHORT S4/T --57g - Our standard model S6 --105g → SHORT S6/T --60g - Our standard model S8 --110g → SHORT S8/T --62g Permissible rotation speed (6000rpm), current capacity (200mA), Slip ring for measurement signals. ＝＝＝＝＝ Overview ＝＝＝＝＝ This serves as the lead wire for transmitting minute signals such as stress, axial force, temperature, and vibration from the rotating body to the fixed side, as well as supplying power from the fixed side to transducers located on the rotating side. For more details, please refer to the catalog or contact us.

• Slip Ring
• Other Connectors

The product photo shows a slip ring with 4 poles that has a built-in encoder with 60 pulses per revolution. Maximum rotation speed: 6,000 rpm Dimensions: φ51×58 (mm)

• Other measurement, recording and measuring instruments
• Power Transmission Equipment
• Slip Ring

Our company offers "slip rings" that play a crucial role in supplying power to rotating bodies and transmitting measurement signals to the fixed side when measuring temperature, torque, strain, acceleration, and more. They are designed to accommodate low noise, making them suitable for small voltage sensor signals. Real-time temperature measurement and heating of the rotating body are possible. 【Features】 ■ A wide range of products available for both low-speed and high-speed rotation ■ Available in both hollow integrated and separate types ■ Wide operating temperature range from -40 to 120°C ■ Increased lifespan through appropriate product selection ■ Capable of responding to urgent requests with short delivery times ■ Custom solutions available according to installation environment ★ We are currently offering materials that explain the thermocouple measurement of this product and rotating bodies! ★ * The explanatory materials can be viewed via "PDF Download." Please feel free to contact us with any inquiries.

• Other semiconductor manufacturing equipment

Our slip rings are designed for high-speed rotation and have excellent durability. They also feature low noise, making them suitable for handling small voltages such as sensor signals. They are used in a wide variety of applications, so please feel free to consult us regarding wiring installation or measurement issues. We offer a wide range of solutions for power supply and measurement signal transmission in semiconductor manufacturing, experimental equipment, and more! We can also accommodate urgent equipment modifications with short lead times (standard catalog items have a lead time of 2 to 3 weeks, even for sudden requests). You can download our catalog from the link below! [Catalog Contents] ■ Slip Ring - Hollow Integrated Type ■ Slip Ring - Hollow Separated Type ■ Examples of Slip Ring Usage ■ Troubleshooting - Thermocouple Measurement Edition

• Other semiconductor manufacturing equipment

A slip ring is a connector that plays the role of transmitting power and measurement signals to rotating bodies. We respond to a wide range of requests, including slip rings that can utilize high-speed rotation know-how for long-term operation on production lines, and types that can be used in environments where the impact of wear dust is a concern, such as in pharmaceutical manufacturing. 【Catalog Contents】 ■ What is a slip ring (basic knowledge and types of slip rings) ■ Hollow integrated type (for measurement signals and low power) ■ Hollow separate type (for measurement signals and low power) ■ Shaft end type slip rings S type and SR type (compact, lightweight, and usable up to multi-pole) *You can download the catalog collectively from the "Download" section below! Please feel free to contact us.

• Slip Ring

A slip ring is a connector that plays the role of transmitting power and measurement signals to rotating bodies. This is a compact type of slip ring suitable for installation in tight spaces and for embedding in equipment. It is ideal for integration into various devices such as extrusion molding machines and coating equipment, as well as for design development experiments of the same devices. It helps in the precise management of temperature, strain, and torque of rotating bodies. 〇 A hollow integrated type that is effective when there are dimensional constraints on the outer circumference of the axis. 〇 A thin hollow separate type that is suitable for installation in areas where there is no space in the axial direction. 〇 An axial end type that is effective in reducing protrusion in the axial direction and minimizing load on small workpieces. We respond to a wide range of requests! It can also be used for power supply. 【Catalog Contents】 ■ What is a slip ring (basic knowledge and types of slip rings) ■ Hollow integrated 298RC type (number of poles 2 to 24) ■ Hollow separate 1-101 type (number of poles 2), 1-301 type (number of poles 3) ■ Axial end type slip ring, thin and lightweight SHORT S series * The catalog is currently available for download below! Feel free to contact us with any inquiries.

• Slip Ring

We offer "hollow slip rings" that can be used for temperature measurement of rotating bodies, encoder signal output, and other power supply applications. Our lineup includes two types: the "hollow integrated slip ring," where the brush and ring are combined, and the "hollow separate slip ring," which has them as separate components. We can also accommodate a wide variety of arrangements, including combinations of measurement and power supply. 【Examples of Applications】 <Equipment> ◎ Machine tools, assembly devices, centrifuges, stirrers, etc. ・Power supply to heaters and motors ・Transmission of control signals to control boards ・Pulse signal output from encoders <Experiments, Development, Research> ◎ Rotating bodies such as transport equipment engines, gearboxes, pump components, tires, etc. ・Measurement of temperature, torque, strain, and acceleration *For more details, please refer to the materials. Feel free to consult us regarding selection, installation, and technical inquiries.

• Slip Ring
• connector
• Other Connectors

This is an introduction to the hollow integrated slip rings (for measurement signals and low power). Number of poles: 2 to 24 poles, Inner diameter: φ12.75, φ25.50, φ38.20, φ50.90, *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

This is an introduction to integrated hollow shaft slip rings (for measurement signals and low power). Number of poles: 2 to 24 poles Inner diameter: φ12.75, φ25.50, φ38.20, φ50.90 *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

This is an introduction to the hollow integrated slip ring (for measurement signals and low power). Number of poles: 2 to 24 poles, Inner diameter: φ12.75, φ25.50, φ38.20, φ50.90, *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

This is an introduction to the hollow separate type slip ring (for measurement signals and low power). Number of poles: 2 to 24 poles, Inner diameter: φ12.75, φ25.45, φ38.15, φ50.90, *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

This is an introduction to hollow separate-type slip rings (for measurement signals and low power). Number of poles: 2 to 24 poles, Inner diameter: φ12.75, φ25.45, φ38.15, φ50.90, *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

This is an introduction to the hollow separate type slip ring (for measurement signals and low power). Number of poles: 2 to 24 poles, Inner diameter: φ12.75, φ25.45, φ38.15, φ50.90, *Custom specifications are also available. For more details, please contact us or refer to the catalog.

• Power Transmission Equipment
• Slip Ring

Supports high-speed rotation. It is a hollow shaft slip ring for thin measurement signals. It features a low starting torque that does not load the measurement rotating shaft. Number of poles: 6 Inner diameter: φ50.8

• Slip Ring

Built-in slip ring SR20M. (Supports up to 36 poles maximum) Simple drip-proof type slip ring fixture for mounting on actual vehicle wheels.

• Assembly Jig

Ideal for signal transmission from sensors such as stress, torque, vibration, and temperature measurements. All-weather wheel fixtures that can handle rain, snow, and off-road driving.

• Assembly Jig

Built-in slip ring SR20M. (Supports up to 36 poles maximum) Simple drip-proof type slip ring fixture for mounting on actual vehicle wheels.

• Assembly Jig

By installing it on the rotating side, precision compensation becomes possible. On the non-rotating side, it is easy to handle like a connector, allowing for wide-ranging applications. Other types are also available depending on the application. ■ Rotating amplifier for thermocouples, AMP-TC type module amplifier, etc. *You can view the catalog from the "Download" section below. Please feel free to contact us regarding measures for measurement errors (the secrets of temperature measurement for rotating bodies), installation methods, peripheral devices, etc. We also provide support for preliminary meetings and aftercare.

• Amplifier

The "MICROTC" is a product that combines a thermocouple connector and an amplifier. It is compact and supports analog output. It can be used with a wide range of power supply voltages. It is compatible with common small thermocouple connectors, and securing it is easy by utilizing the center hole. We offer a "Single type" for positive temperature measurement and a "Dual type" that supports both positive and negative temperature measurement. 【Features】 ■ Amplifies thermocouple output to 5mV/°C ■ Built-in cold junction compensation circuit ■ Contains a linearizer for high-precision measurement *For more details, please refer to the documentation. Feel free to contact us with any inquiries. ★ We are also distributing the document "Tips for Soldering K-Type Thermocouple Wires and Wiring Trivia"!

• Amplifier

An amplifier is installed on the rotating side to transmit the measurement signal at a high level, improving the S/N ratio and ensuring accurate transmission. It is optimal for temperature measurement in rotating bodies. Available for 2 to 9 channels.

• Amplifier

Built-in bridge circuit that allows direct connection of "1 gauge method (2 and 3 wire type)" and "adjacent 2 gauge method"! An amplifier for rotating bodies capable of measuring minute stress values.

• Amplifier

By installing the bridge circuit on the rotating side, the impact of noise from the slip ring contact points and external sources is reduced. (Temperature compensation is necessary if there is a temperature difference between the active gauge and the bridge box.)

• Amplifier

■Connector Type Thermocouple Amplifier "MICROTC" Widely usable for both rotating and non-rotating bodies! For temperature measurement of rotating bodies... By installing it on the rotating body and outputting through a slip ring, it allows for accuracy compensation compared to measurement with a slip ring alone, achieving more accurate temperature measurement. Effective even for non-rotating bodies... It is a compact connector type for thermocouples, easy to handle, and can be installed close to the measurement point for early voltage conversion of small electromotive force. It reduces the influence of noise up to the logger. It is also effective when analog signal processing is required. Other types: Thermocouple Rotary Amplifier "AMP-TC" Module Amplifier ⇒ Can be integrated into S and SR type slip rings. ■Rotating Bridge Box When measuring strain stress of rotating bodies, by installing it on the rotating side via a slip ring, the distance of the four sides of the bridge circuit can be shortened, reducing the influence of rotational noise and external disturbances. *You can view the catalog from the "Download" section below. Feel free to contact us regarding countermeasures for measurement errors (essentials of temperature measurement for rotating bodies), installation methods, peripheral devices, etc. We also support pre-meetings and aftercare.

• Amplifier