太陽計測 List of Products and Services

Even a small amount of condensate transported through the compressed air network can cause significant damage to equipment and processes. It is crucial that all condensate is completely removed from the compressed air circuit. Condensate management is a key component of the compressed air system. Its role is to ensure the efficient removal of all condensates and impurities present in the compressed air. With 50 years of experience, Parker Hiross has been able to develop Hyperdrain, designed to meet all customer requirements.

• Water treatment equipment

Compressed air is a fundamental power source widely used across various industries. This safe, cooperative, and reliable compressed gas occupies the most important part of the production process. While this beneficial compressed gas is essential, it contains contaminants such as moisture, debris, metal dust, and degraded lubricants that mix together to form undesirable sludge. Much of this sludge is acidic, which can shorten the lifespan of pneumatic equipment, clog valves and small pipes, necessitating frequent maintenance and leading to air leaks that increase costs. Furthermore, it can corrode piping systems and cause significant damage to production processes. By using high-performance air filters equipped with drain traps, it is possible to remove oil, moisture, and particulate debris, thereby eliminating undesirable sludge from the compressed air system. However, in modern manufacturing systems and processes that demand higher quality air, this alone may not be sufficient. In such cases, drying the entire compressed air system is unnecessary and costly. Therefore, there has been a demand for adsorption air dryers that can supply high-quality air only where it is needed.

• Dehumidifier

● The inspection cost of machine tools can be reduced to one-fifth. ● Measurement starts automatically with just one operation. ● Everything from measurement to report creation is fully automated.

• Milling machine
• Electric discharge machine
• Machining Center

The "KEYSIGHT 5530 Dynamic Calibrator" sold by our company, Taiyo Measurement Co., Ltd., is a laser interferometer-based calibration system aimed at manufacturers and users of machine tools, functioning as a laser length measuring device. Since 2000, we have been the national general distributor for Keysight Technologies' laser length measurement systems for end users, providing "quality improvement" through the sale of laser measuring devices. 【Features】 ● New sensor achieving an accuracy of 0.4 ppm ● Ultra-compact new electronics the size of a cigarette box ● Significant miniaturization and weight reduction ● High-performance, high-reliability laser head ● Compatible with eight global standards including JIS/ISO ● A wide range of length measurement options and user-friendly interface 【By using the measurement kit, it can be utilized for various measurement items】 - Linear, Diagonal, Angle, Angular Position, Squareness - Flatness and Straightness of Path, Straightness and Parallelism *For more details, please check the PDF.

• Other measurement, recording and measuring instruments

The Laser Axis Board 10897C manufactured by Keysight Technologies is used, allowing for multi-axis measurement and synchronous measurement. A test program is included, enabling immediate operation. Previously, customers had to design and manufacture their own hardware and software, but these are no longer necessary. There are internal/external trigger inputs, allowing for synchronous measurement.

• Machining Center
• Other semiconductor manufacturing equipment
• Distance measuring device

This is a device that easily produces hydrogen gas from pure water. The hydrogen purity is 99.9995%! It can be safely used as it produces only the amount needed when required. With a maximum discharge pressure of 0.69 MPa, it is classified as a product outside the High-Pressure Safety Act. The newly designed electrolytic cell comes with a long-term warranty of two years after delivery.

• Gas Generator
• Other laboratory equipment and containers
• Other environmental equipment

- Simply connect to the compressor for safe and easy supply of combustion gas and carrier gas. - Removal of carbon dioxide and hydrocarbons. - Gas supply purity meets all standards of TOC measurement devices from various manufacturers. - Lower cost compared to high-pressure oxygen cylinders. - Increased analytical sensitivity compared to when using high-purity oxygen cylinders. - Benchtop type that can be directly installed on the laboratory bench. *Please prepare a separate compressed air source with moisture removed.

• Gas Generator

- Generates nitrogen gas from a compressed air source. - Purity: 95% to 99.5% - Produces nitrogen gas with a dew point below -50°C. - Compact design that does not take up floor space. - Flow rate: 1 to 557 liters/min. - Built-in activated carbon filter to remove hydrocarbons. - Oxygen concentration meter (optional). * Please prepare a separate compressed air source from which moisture has been removed. Supply of membranes only is also available, so please contact us if you wish to incorporate them. <For separate inquiries about ultra-high purity PSA nitrogen gas generation systems, please consult us.>

• Nitrogen Gas Generator
• Other packaging machines
• Analytical Equipment and Devices

- It has a system that reliably removes carbon dioxide and water vapor, which can interfere with FT-IR measurements. - It is equipped with a coalescing filter that removes fixed particles larger than 0.01 μm. - The dew point will be -73°C. - It protects against corrosion of the beam splitter caused by moisture. - The improved S/N ratio allows for more accurate analytical results. - There is no need for a nitrogen gas cylinder, enabling operation throughout the day. (*Please prepare a separate compressed air source with moisture removed.)

• Semiconductor inspection/test equipment
• Analytical Equipment and Devices
• Other environmental equipment

- The analysis sensitivity will significantly increase. - Zero air with hydrocarbon concentration < 0.05 ppm is purified from compressed air. - It operates at low pressure from 0.28 MPaG (2.8 s/cm²G) to 0.86 MPaG (8.8 s/cm²G), making it safer compared to high-pressure gas cylinders. - It has a built-in coalescing filter that cuts solid particles larger than 0.01 μm. - It removes mist and organic substances derived from compressed air, supplying clean air. - It is a benchtop model that can be placed directly on the experimental table. * However, please prepare separately for the compressed air with moisture removed.

• Gas Generator

- Purity: 99.99999%, discharge pressure (0.4MPa) - Maximum gas flow rate: 150JA (150ml/min), 300JA (300ml/min) - A model that uses a palladium membrane in the electrolytic cell to produce ultra-high purity hydrogen. - Easy operation with a liquid crystal display. - Benchtop type that can be placed directly on the experimental table. - Stored hydrogen gas is less than 50ml at any pressure.

• Gas Generator

- Purity: 99.9999% or higher, discharge pressure (0.69 MPa) - High-purity hydrogen gas is stably supplied through the fusion of high-quality SPE (Solid Polymer Electrolyte) and palladium membrane technology. - No desiccants such as silica gel are required. - Easy operation with LCD display. - Installation of a pure water device (optional) is possible. - Remote control is available as an option.

• Gas Generator

We handle filters from "Parker Hannifin Corporation." We provide a catalog of filters to those who are interested.

• filter