田中インポートグループ List of Products and Services

In metal processing sites, the oil mixed into cutting fluid causes various problems such as the deterioration of cutting fluid, reduced tool life, and worsening of surface finish roughness. The "Tube Skimmer" is a compact tube-type oil removal machine that addresses these challenges and can be installed in various locations. 【Usage Scenarios】 * Machines with narrow openings for cutting fluid tanks, such as NC lathes and small machining centers * Deterioration of cutting fluid and reduced tool life due to mixed oil, as well as worsening surface finish roughness * Reduction of waste liquid treatment costs 【Benefits of Implementation】 By introducing the "Tube Skimmer," you can efficiently remove mixed oil from cutting fluid, leading to the following expected benefits: * Extension of tool life by preventing cutting fluid deterioration * Improvement in product quality due to enhanced surface finish roughness * Cost reduction by suppressing waste liquid generation * Reduction of environmental impact

• Other surface treatment equipment
• Other processing machines

Are you having trouble with narrow openings in NC lathes or small machining centers for cutting fluid tanks? The tube-type oil removal machine, "Tube Skimmer," is compact and does not require a specific installation location, making it easy to introduce even in tight spaces. It enhances the recovery efficiency of mixed oil, extends the lifespan of cutting fluid, and reduces costs through waste liquid reduction. 【Usage Scenarios】 * Cutting machines like NC lathes and small machining centers * Narrow openings where conventional oil-water separation devices cannot be installed * Deterioration of cutting fluid and reduced tool lifespan due to mixed oil * Reduction of waste liquid treatment costs * Improvement of cutting efficiency and surface finish roughness 【Benefits of Introduction】 By introducing the "Tube Skimmer," the recovery efficiency of mixed oil improves, extending the lifespan of cutting fluid. This reduces the frequency of cutting fluid replacement and lowers waste liquid treatment costs. Additionally, preventing the deterioration of cutting fluid extends tool lifespan and enhances cutting efficiency and surface finish roughness.

• Other surface treatment equipment
• Other processing machines

In automotive manufacturing, the oil generated during cutting processes mixes with the cutting fluid, leading to the deterioration of the cutting fluid, machine failures, and environmental impact. The tube-type oil removal device, "Tube Skimmer," is an optimal solution for removing mixed oil in devices like small machining centers (MC) and NC lathes, where the opening of the cutting fluid tank is narrow. Its compact design allows for easy installation without requiring a specific location. 【Usage Scenarios】 * Small MCs and NC lathes that perform cutting processes for automotive parts * Situations where the opening of the cutting fluid tank is narrow, making it impossible to install conventional oil-water separation devices * Issues related to the deterioration of cutting fluid, machine failures, and environmental impact due to mixed oil in the cutting fluid 【Benefits of Implementation】 By introducing the Tube Skimmer, mixed oil in the cutting fluid can be removed, extending the life of the cutting fluid. This reduces the frequency of cutting fluid replacement and helps minimize the amount of waste liquid generated. Additionally, it prevents machine failures caused by the deterioration of cutting fluid, contributing to improved production efficiency.

• Other surface treatment equipment
• Other processing machines

The unequal lead end mill sharpening machine "PT-03BF" is a compact sharpening machine that allows for easy re-sharpening of the increasingly popular unequal lead end mills. It solves problems such as the difficulty of re-sharpening unequal end mills, which often leads to their disposal, and the costs and time associated with sending them to re-sharpening services! Based on the well-received end mill sharpening machines "PT-03AN" and "PT-03B," we have redeveloped and newly released the "PT-03AF" and "PT-03BF," which can re-sharpen both equal and unequal lead end mills with a single machine. 【Specifications】 ■ Sharpening Range: PT-03AF: 4~14mm, PT-03BF: 4~20mm ■ Number of Flutes (Equal Division): 2, 3, 4 flutes ■ Number of Flutes (Unequal Lead): 4 flutes *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

During the rainy season to summer, cutting fluids can emit unpleasant odors and become prone to decay. To prevent this, it is essential to remove contaminating oils and inhibit the growth of harmful bacteria. The "Tube Skimmer TS900" is an excellent oil removal device (oil skimmer) that can be easily installed in any location. When used in conjunction with the tablet Blue Fresh, which prevents the occurrence and proliferation of harmful bacteria, it helps to prevent the decay of cutting fluids and enables long-term use. We have test units and sample tablets available, so please feel free to contact us. 【Features】 <Tube Skimmer TS900> ■ Compact and unobtrusive, can be installed anywhere ■ Prevents decay of cutting fluids and extends tool life ■ Significantly reduces the generation of waste fluids ■ Improves cutting efficiency and surface finish roughness ■ Main unit weight is approximately 2.7 kg * For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Organic Natural Materials
• Ceramics

We would like to introduce our sludge and chip (swarf) cleaner, the 'SCP20-SF/WF'. With top-class suction power in Japan, it effectively sucks up chips and other debris accumulated in the coolant tank, and it is easy to move thanks to its casters. By adopting a pressure dehydration method driven by air, it efficiently discharges coolant fluid, allowing for collection even while the machine is in operation. 【Features】 ■ Maintains the original processing performance of cutting fluid ■ Reduces stains and corrosion on workpieces and cutting tools ■ Minimizes unpleasant odors caused by the deterioration of cutting fluid ■ Extends the lifespan of cutting fluid, reducing replacement costs ■ Reduces cleaning time *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

This catalog introduces oil skimmers designed to remove sliding surface oils and other contaminants mixed into water-soluble cutting fluids. By installing these devices, you can reduce costs through the prevention of cutting fluid deterioration and extend its lifespan, while also improving the working environment by preventing unpleasant odors. At the same time, tool life and processing quality can be stabilized. We offer a wide variety of oil skimmers, allowing for a broad selection tailored to your environment. Please use this information to assist in product selection. [Featured Products (Excerpt)] ■ Super Oil Skimmer "WSP-15A" ■ Tube Skimmers "TS900/TS1400/TS1800" ■ Disc Skimmers "ES300/ES400/ES650" ■ Belt Skimmers "BS200/BS300" ■ Blue Fresh *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other processing machines

This catalog introduces the grinding machines handled by our company. Starting with the end mill grinding machine "PT-03A/PT-03B," which allows for the adjustment of the inclination angle of the bottom blade, we also offer the cutting machine "PT-02" and the tap grinding machine "PT-04A/PT-04B," among others. Please use this for selecting products. 【Featured Products】 ■ End Mill Grinding Machines "PT-03A/PT-03B" "PP-25" ■ Cutting Machine "PT-02" ■ Tap Grinding Machines "PT-04A/PT-04B" ■ Broach Boring Grinding Machine "PT-1000" *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Other processing machines

Introducing the precision end mill sharpening machine 'PP-25'. It can sharpen 2, 3, 4, and 6-flute end mills. Both the tip and side cutting edges can be sharpened. The shank diameter ranges from φ6 to 25mm. It can also accommodate 3 to 5mm as an option. Please feel free to contact us when you need assistance. 【Features】 ■ Tip and side edge sharpening ■ Sharpening for 2, 3, 4, and 6-flute end mills ■ Shank diameter of 6 to 25mm (optional 3 to 5mm) *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

The "PT-03B" is an end mill grinding machine for cutting edges. The grinding wheel is a diamond #230 (for carbide only). The end mill diameter ranges from φ4 to 20mm. A CBN grinding wheel #230 (for high-speed steel only) is also available for separate purchase. Please feel free to contact us if you need it. 【Specifications】 ■ End mill diameter: φ4 to 20mm ■ Grindable edges: 2, 3, or 4 flutes ■ Bottom edge angle: 3° (fixed) ■ Standard grinding wheel: Diamond #230 (for carbide only) ■ Power supply: 100V 50/60Hz ■ Weight: 13kg ■ Optional item: CBN #230 (for high-speed steel only) *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

The "PT-03AN" is an end mill grinding machine for cutting edges. The grinding wheel is a diamond #230 (for carbide only). The blades that can be ground are bottom blades with 2, 3, or 4 flutes. CBN grinding wheels #230 (for high-speed steel only) are also available separately. Please feel free to contact us if you need them. 【Specifications】 ■ End mill diameter: φ4 to 14mm ■ Grindable blades: bottom blades with 2, 3, or 4 flutes ■ Bottom blade tip angle: 3° (fixed) ■ Standard grinding wheel: diamond #230 (for carbide only) ■ Power supply: 100V 50/60Hz ■ Weight: 10kg ■ Optional items: CBN #230 (for high-speed steel only) *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

The "PT-09EW" is a conical-shaped, steel frame, thin plate candle drill sharpening machine. It features X and Y axis slides, with a sharpening range of φ12.1 to 32mm. The motor operates at 4,800 (min-1). 【Specifications (partial)】 ■ Tip angle: 90 to 140° (conical shape) ■ Grinding wheel: CBN #100, specifically for conical shapes ■ Drill diameter: φ12.1 to 32mm ■ Dimensions: 360W × 280D × 250H ■ Weight: 27.4kg ■ Motor: 4,800 (min-1) *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

The "PT-09E" is a dedicated drill sharpening machine for candle grinding of steel frames and thin plates. It features X and Y axis slides, with a grinding range of φ12.1 to 32mm. Dimensions are 360W × 280D × 250H, and the weight is 27.4kg. 【Specifications (partial)】 ■ Tip angle: 160 to 190° (thin plate candle, steel frame) ■ Grinding wheel: CBN #100 for candle and high-speed steel ■ Drill diameter: φ12.1 to 32mm ■ Dimensions: 360W × 280D × 250H ■ Weight: 27.4kg ■ Motor: 4,800 (min-1) *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

The "PT-1000" is a broach regrinding machine that allows for the regrinding of broaches, helping to reduce purchase costs. It supports positioning, external blade grinding, internal blade grinding, and gash grinding. While it cannot achieve the same shape as new during regrinding, it enables good hole processing. 【Features】 ■ Allows for the regrinding of broaches, reducing purchase costs ■ Supports positioning, external blade grinding, internal blade grinding, and gash grinding ■ Cannot achieve the same shape as new during regrinding, but enables good hole processing ■ Unequal division blades can be ground up to an outer diameter of 28mm *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "WSP-15A" is an oil skimmer that rapidly collects and removes floating oil using a diaphragm pump suction method. Thanks to its unique oil fence design, the oil recovery efficiency is significantly improved. It also allows for the defoaming of bubbles that tend to occur during suction. Additionally, the oil-water separation is based on specific gravity separation, eliminating the need for replacement of consumables. 【Features】 ■ Rapid collection and removal of floating oil using a diaphragm pump suction method ■ Improved stability of the suction inlet with a 4-float system ■ Air-driven system requires no power supply and is low maintenance ■ Oil-water separation based on specific gravity separation eliminates the need for replacement of consumables ■ Significant increase in oil recovery efficiency due to the unique oil fence design *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

The "Micro-10" is a desktop model drill grinding machine that precisely and accurately creates 3+3 rake cross-cutting super points. It achieves outstanding sharpness and can increase the normal feed speed by 50%. The chips automatically break, making it ideal for unmanned automatic operation. With operations 1, 2, and 3, it can automatically grind the first, second, and third angles. 【Features】 ■ No center ring required ■ High-speed rotation and high-speed feeding possible ■ Long lifespan ■ Achieves outstanding sharpness ■ Chips automatically break ■ Cutting edges are self-centering *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

The PT-01EN is a candle drill sharpener that allows for conical grinding and thin plate candle grinding through the exchange of grinding wheels. It is also capable of sharpening stepped Musashi drills using separately sold grinding wheels. Our company offers a selection of unique and cost-effective products from abroad, including American products with perspectives that Japanese people might not think of, traditional high-rigidity and high-precision European products, and stable-quality Asian products. 【Specifications】 ■ 90° to 140° conical grinding - Grinding range: φ2 to 13mm ■ Thin plate candle grinding - Grinding range: φ4 to 13mm - Stepped Musashi drill (using separately sold grinding wheels) - Standard grinding wheels: CBN #230 x 2 pieces (for conical and thin plate candles) - Dimensions: 300W x 200D x 200H - Weight: 12kg *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

The PT-05 is a drill grinding machine specifically designed for countersinking screws. It is also possible to regrind counterbores with optional accessories. An ER collet set A and an instruction manual are included. Our company offers unique American products with perspectives that Japanese people might not think of, traditional high-rigidity and high-precision European products, and cost-effective and quality-stable Asian products, all of which are unique and excellent in cost performance. 【Specifications】 ■ Grinding range: φ3 to 13mm ■ Tip angle: 90° ■ Grinding wheel: CBN #230 ■ Dimensions: 290W × 140D × 160H ■ Weight: 8.2kg ■ Motor: 4,800 (min-1) *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

The PT-08 is a drill sharpening machine equipped with a thinning depth adjustment function. The sharpening range is φ2 to 20mm, and the tip angle specifications range from 90° to 140°. It achieves high precision with easy sharpening. We offer a selection of unique and cost-effective products from overseas, including American products with perspectives that Japanese people might not think of, traditional high-rigidity and high-precision European products, and stable-quality Asian products. 【Specifications】 ■ Sharpening range: φ2 to 20mm ■ Tip angle: 90° to 140° ■ Grinding wheel: CBN #230 ■ Thinning shape: X thinning ■ Dimensions: 290W × 140D × 160H ■ Weight: 8.2kg ■ Motor: 4,800 (min-1) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

When repairing damage or small scratches on molds and parts using arc welding, not only the repair area but also the surrounding areas can be heated, which may cause warping, and there is a possibility of sparks flying, leading to damage outside the repair area. The "Mold Mender MM-912" allows for welding at small points without generating significant heat, and it does not produce sparks. It makes the repair and correction of molds easy. 【Features】 ■ Minimal heat generation and spark dispersion ■ Uniform hardness of the welded repair material ■ No shrinkage of the mold around the welded area ■ Capability to repair small points ■ Ability to finish the welding surface uniformly flat

• Plastic Mould
• Rubber mold
• Other molds

The "Super Oil Skimmer WSP-15A" quickly recovers oil using a diaphragm pump. It can efficiently collect floating oil from large tanks in a short time. Additionally, the multi-layer partition plate enhances the defoaming performance. It also comes with casters for easy mobility. This single unit can recover floating oil from multiple tanks. 【Problems it can solve】 ■ Struggling with excessive floating oil... ■ Having trouble with foam overflowing from tanks... ■ Experiencing unpleasant odors from coolant... ■ Wanting to extend the lifespan of coolant and cleaning liquids... *For more details, please contact us or download the PDF to view.

• Wastewater/wastewater treatment equipment

The "Tube Skimmer" from Zebra Corporation, which we handle, is a tube-type oil removal device (floating oil recovery device) suitable for machines with narrow openings in the cutting fluid tank, such as NC lathes and small machining centers. By simply inserting the attached tube into the opening, it is possible to recover mixed oil. The recovery area is small, which also prevents simultaneous recovery of cutting fluid. 【Features】 - Compact design that does not require a specific installation location - Can be installed in about 10 minutes (no construction required) - Prevents the deterioration of cutting fluid and extends tool life - Reduces the generation of waste liquid, allowing for cost reduction - Contributes to improved cutting efficiency and surface finish roughness *For more details, please refer to the PDF document. If you would like a demonstration, please apply through the contact form.

• Other surface treatment equipment
• Other processing machines

The "PT-3000A" is an automatic drill sharpening machine with a tip angle of 118° to 150°. The thinning shape is X-thinning. The sharpening range is φ3 to 21mm. Conical shapes can be automatically created. Manual "90° sharpening device" and "sharpening set for 21mm to 30mm" are also available as separate items. 【Features】 ■ High-end type ■ Circular shape can be automatically created ■ Accessories: Two types of chucks *For more details, please refer to the PDF document or feel free to contact us.

• Other surface treatment equipment
• Wafer processing/polishing equipment

Our company offers a wide range of drill sharpening machines that anyone can easily operate. For standard conical drills, we have the PT-01, PT-07, PT-08, and PT-09A, as well as the automated PT-3000A for the sharpening process, and the PT-09E, which can easily sharpen thin plate candles and steel frame drills, catering to a wide variety of customer needs. You can simply connect it to a household power supply and start using it right after installation. We are currently offering a "comprehensive catalog" that summarizes our lineup. 【Features】 ■ Automatic drill sharpening! ■ Easy adjustment of thinning depth! ■ Stable finishing accuracy for uniform quality! ■ Product lineup covering sharpening ranges from φ2 to 32mm! *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other surface treatment equipment
• Wafer processing/polishing equipment

The "PT-02" is a product suitable for cutting drills and end mill taps. The cutting diameter ranges from φ4 to 14, and a diamond #100 wheel specifically for carbide is used. 【Features】 ■ Ideal for cutting drills and end mill taps ■ Cutting diameter: φ4 to 14 ■ Grinding wheel: Diamond #100 (for carbide only) ■ Dimensions: 35×23×27 cm ■ Weight: 12 kg ■ Power supply: 100V 50/60Hz *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• End Mills

The "PT-04A/PT-04B" is a tap grinding machine that anyone, including women and beginners, can easily use for regrinding. The grinding range of the "PT-04A" is M5 to M18, while the "PT-04B" has a grinding range of M16 to M40, allowing for a wide range of grinding. This product can grind the gripping parts and the back of the blade of straight point taps, as well as the gripping parts of spiral taps. 【Features】 ■ Contributes to reducing tool costs ■ Easy regrinding of straight point taps and spiral taps ■ Anyone can easily grind ■ Tip angle: 5 to 30° *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment
• Tap

The latest drill sharpening machine from Tanaka Import Group is an automatic drill sharpening machine. With manual machines, there can be some variation due to the user's hand adjustments, but by automating the sharpening process, it ensures a stable finishing accuracy and maintains quality. *Demonstrations are available! For more details, please contact us using the form below. **Features** - Automatic drill sharpening! - Uniform quality with stable finishing accuracy! - Ensures stable precision! - Wide range of drill sharpening (3mm to 21mm) **Other Tool Sharpening Machine Lineup** - Drill Sharpening Machines (PT-01, PT-08, PT-07, PT-09A, PT-01E, PT-09E, YN-08 Super) - End Mill Sharpening Machines (PT-03A, PP-25) - Tap Sharpening Machines (PT-04A, PT-04B) - Cutting Machines (PT-02) *For more information, please contact us or download the catalog.

• Other surface treatment equipment
• Wafer processing/polishing equipment

The latest drill sharpening machine from Tanaka Import Group allows for easy and high-precision drill sharpening. It features adjustable drill tip angles, relief angles, and thinning depth. The reasons for being chosen for over 30 years are price, performance, and after-sales support. 【Selected Lineup】 Drill Sharpener PT-01 ○ High-precision ER collet set of 12 ○ Drill tip angle adjustment from 90° to 140° ○ Drill sharpening range φ2 to 13mm ○ Thinning depth adjustment feature Drill Sharpener PT-07 ○ High-precision ER collet set of 20 ○ Drill tip angle adjustment from 90° to 140° ○ Drill sharpening range φ12.1 to 32mm ○ Thinning depth adjustment feature Drill Sharpener PT-09E ○ Candle drill sharpening for steel frames and thin plates ○ High-precision ER collet set of 20 ○ Drill tip angle adjustment from 160° to 190° ○ X and Y axis slide ○ Drill sharpening range φ12.1 to 32mm *For more details, please contact us or download the catalog. 【Other Sharpening Machines】 End mill sharpeners, tap sharpeners, cutting machines.

• Other surface treatment equipment

The "PT-09AN" is a set product that includes the "PT-01N," which can grind drills with a diameter of φ2 to 13mm, and the "PT-07," which is compatible with drill grinding from φ12.1 to 32mm. With simple operation, a wide range of drill sizes can be ground immediately. This allows for the quick preparation of necessary drills, contributing to reduced tool consumption and cost savings. Additionally, since it uses CBN grinding wheels as standard, it enables precise grinding and has a long lifespan. It is also possible to adjust the clearance angle according to the work material. 【Features】 ■ A product set that includes two general-purpose drill grinders ■ The operation method consists of three steps: "Positioning," "Angle Grinding," and "Thinning" ■ The grinding wheel can be changed to a diamond grinding wheel as an option *We are currently offering a free sample grinding service. Please feel free to contact us if you are interested. You can also view the comprehensive catalog from the <PDF download>.

• Other surface treatment equipment

The "PT-07" is a drill sharpening machine that achieves high precision with simple grinding and features a thinning depth adjustment function. It meets the needs for increased production efficiency and is involved in the import and sale of excellent overseas machine tools and cutting fluids. Based on over 30 years of know-how and achievements since its founding, we propose the most necessary equipment and production improvements for manufacturing sites. 【Features】 ■ High precision ER collet set of 20 ■ Tip angle 90° to 140° ■ Grinding range φ12.1 to 32mm ■ Thinning depth adjustment function included *For more details, please refer to the PDF document or feel free to contact us.

• Other surface treatment equipment

The "PT-01N" is a drill sharpening machine equipped with a thinning depth adjustment function that achieves high precision with easy grinding. We handle the import and sale of excellent overseas machine tools and cutting fluids, and based on over 30 years of know-how and achievements since our founding, we propose the most necessary equipment and production improvements for the production site. We respond to needs such as increased production efficiency. 【Features】 ■ High precision ER collet set of 12 ■ Tip angle 90° to 140° ■ Grinding range φ2 to 13mm ■ Equipped with thinning depth adjustment function *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine tools
• Other surface treatment equipment

By replacing with a diamond grinding stone, even carbide drills can be sharpened, making it suitable for drilling high-hardness materials. Re-sharpening general-purpose high-speed steel drills with this product achieves cutting conditions comparable to high-performance drills, leading to cost reduction. 【Features】 ■ Re-sharpening general-purpose high-speed steel drills with this product increases the rotation speed by 1.5 times and the feed rate by 2 times. ■ Significantly improved cutting conditions. ■ Also suitable for re-sharpening high-performance drills from various manufacturers. *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Wafer processing/polishing equipment

An oil skimmer that is perfect for situations where there is not enough opening to insert discs or belts into the coolant tank of NC lathes and small MCs. The Tube Skimmer TS900 demonstrates its effectiveness. It works well in small spaces, such as under chip conveyors! 【Features】 ■ Compact and unobtrusive, can be installed anywhere ■ Prevents coolant decay and extends tool life ■ Significantly reduces waste liquid generation ■ Improves cutting efficiency and surface finish roughness ■ Main unit weight is approximately 2.7 kg *For more details, please contact us or download the PDF.

• Other processing machines

Traditionally, complex machinery was required, but the "Ultra-Precision Drill Grinding Machine Micro-10" is a desktop model that precisely and accurately creates 3+3 rake cross thinning super points. 【Features】 ■ Achieves outstanding cutting performance. Can increase normal feed speed by 50% ■ Chips are automatically broken. Ideal for unmanned automatic operation ■ The cutting edge features self-centering, realizing high productivity in machining centers 【Capabilities】 Grinding range: φ0.5 to 6.35mm (optional collet chuck set φ6 to 16mm) Point angle: 80 to 180° Drill/thinning shape: 3 rake X (cross) thinning * Equipped with a projector

• Grinding Machine
• Other machine tools

◆Product Features◆ ~Eliminate tank odors at the source!~ - Just one tablet per week for a 100L tank - Specifically for water-soluble cutting fluids - Safer, more economical, and effective compared to disinfectants - Does not contain harmful components such as formaldehyde *For more details, please download the PDF or contact us directly.*

• Organic Natural Materials
• Ceramics
• others

◆Product Features◆ ≪Removes contaminating oils that cause the deterioration and foul odor of cutting fluids≫ - Extends the lifespan of cutting fluids - Economical

• Other cleaning machines
• Hazardous material processing
• Wastewater/wastewater treatment equipment

◆Product Features◆ - Solution Type (Pure chemical, no oil components) - Super cooling properties.

• Organic Natural Materials
• Ceramics
• others

【Features】 Of course, it can be applied to all metals, including aluminum, without causing stains or corrosion on the surface. Especially in finishing, fine chips are blown away by air, achieving excellent surface roughness and extending tool life. As for the properties of the liquid, it does not become sticky, allowing for the omission or significant reduction of post-processing. 【Capacity】 1L plastic bottle, 5L plastic bottle, 18L pail For through-spindle turret systems using DC-S4, we recommend Altima Light.

• Fats and oils
• Lubricants
• others

◆Product Features◆ - Made from plant oils, making it gentle on the skin and the environment (99% biodegradable) - Nanocolloid ultrafine particles break down oils and dirt - Does not damage materials as it does not involve chemical reactions for cleaning - Excellent deodorizing and antibacterial properties

• Organic Natural Materials
• Ceramics
• others

【Features】 Mist spraying capability from a 1mm diameter nozzle: Mist is sprayed from the main body nozzle at an air pressure that is almost equal to the supplied air pressure. When 0.5MPa of air is supplied, the air pressure at the nozzle is almost 0.5MPa with no pressure drop. This pressure allows for powerful mist spraying even from a 1mm diameter nozzle. (Test conducted using test piping prepared by our company) Automatic oil quantity adjustment: The oil quantity automatically increases or decreases in response to changes in nozzle diameter. When the nozzle diameter increases, the air volume increases, and the oil quantity also automatically increases. Conversely, when the nozzle diameter decreases, the oil quantity similarly decreases. It consistently sprays mist with almost constant density in response to changes in nozzle diameter. In a system that supplies oil via a pump, adjustments to the number of piston movements must be made based on the M signal, which requires effort in creating and modifying the program. Maintenance-free: Instead of using a piston pump, liquid is pushed out by the difference in air pressure from a special airline mechanism, sent to the nozzle section, and atomized with high-pressure air. Since there are no piston components or filters, it can be considered almost maintenance-free.

• lathe
• Other machine tools

This is an MQL mist device that applies micro mist using a lockline nozzle. The main body, lockline nozzle, and ON/OFF ball cock each have magnets, making installation on the machine easy and taking about three minutes. No modifications to the machine are necessary. 【Features】 ■ The oil amount can be adjusted while observing the oil drip, ensuring safety and reliability. ■ Stopping the supply air will also stop the dripping, making operation very simple. ■ By adding one solenoid valve, automation can be achieved immediately. ■ It can be installed on any machine at an economical price.

• Other processing machines
• lathe
• Other machine tools

◆Product Features◆ - Easy to remove with the quick installation device BST-1 (sold separately) - Usable with multiple machines with one unit - Achieves 100% efficient recovery of floating oil when used in conjunction with the oil separator TS92 (sold separately)

• Other cleaning machines
• Hazardous material processing
• Wastewater/wastewater treatment equipment

◆Product Features◆ ≪Installable Anywhere≫ - Demonstrates effectiveness when there is insufficient opening to insert discs or belts into cutting fluid tanks of NC lathes or small machining centers. - Compact design ensures it does not obstruct small spaces, such as under chip conveyors. ≪Prevents Cutting Fluid Decomposition≫ - Extends tool life. ≪Significantly Reduces Waste Liquid Generation≫ ≪Improves Cutting Efficiency and Surface Finish Roughness≫

• Other cleaning machines
• Hazardous material processing
• Wastewater/wastewater treatment equipment

Tip and side blade sharpening 2, 3, 4, 6 blade sharpening Shank diameter: φ6 to 25mm (optional 3 to 5mm)

• Grinding Machine
• Other machine tools