ジョブル List of Products and Services

The TE10-110-TX is an indoor transmitter (TX) with one PoE Plus compatible LAN port, designed for EPoT (Ethernet & Power over UTP/STP cable). It operates using PoT power from an EPoT receiver located up to 1,200 meters away via CAT5e or higher UTP/STP cables, transmitting Ethernet and power to connected devices such as cameras.

• LAN construction and wiring work
• Surveillance Camera System
• others

The XE12-120-TX is an indoor transmitter (TX) for EPoC (Ethernet & Power over Coaxial) that has two PoE-compatible LAN ports. It operates using PoC power from an EPoC receiver located up to 500 meters away via a single coaxial cable, transmitting Ethernet and power to two connected cameras, among other devices.

• Surveillance Camera System
• LAN construction and wiring work
• others

The XE10-110-TX is an indoor transmitter (TX) with one PoE Plus compatible LAN port, designed for EPoC (Ethernet & Power over Coaxial). It operates using PoC power from an EPoC receiver located up to 1,200 meters away via a single coaxial cable, transmitting Ethernet and power to connected devices such as cameras.

• Surveillance Camera System
• LAN construction and wiring work
• others

The XE11-110 kit A is a set that includes one indoor 1-port transmitter "XE10-110-TX" from the EPoC (Ethernet & Power over Coaxial) series and one indoor 1-port receiver with PoE power supply type "XE11-110-RX".

• Image Transmission Equipment
• LAN construction and wiring work
• others

The SP006H is a surge protector that can be used with Ethernet wiring up to 10Gbps. - It protects equipment from sudden voltage spikes caused by induced lightning and other sources. - It can be used with various transmission devices that utilize 10/100/1000M and 10G network equipment and LAN cables. - It is also ideal for protecting HDMI transmission devices using HDBaseT, which require large amounts of data transmission. - It does not require a power supply. - It complies with IEC61000-4-5. *Please use a CAT6 or higher LAN cable when displaying video at 1080p 60Hz or higher. *To achieve the transmission performance of HDMI 1.4 (10.2Gbps), please use a CAT6A or CAT7 LAN cable.

• LAN construction and wiring work
• Other security and surveillance systems
• Other anti-static devices

- This is a high-sensitivity microphone with a built-in amplifier that operates on DC12V. - The microphone itself is integrated with a voice/power cable (450mm). - Since the microphone and circuit board are not housed in a case, it is compact and suitable for embedding.

• Other security and surveillance systems

The HKM01-4K transmits up to 4K HDMI, USB, analog audio, infrared remote control (IR) signals, and RS232C over a single LAN cable. - Supports HDMI signals up to 4K 30Hz 4:4:4 - The receiver is equipped with a 4-port USB hub compatible with USB 2.0 - Supports simultaneous bidirectional analog audio transmission - Maximum transmission distance is 140m with CAT6 cable - Compatible with HDCP 1.4

• Other PCs and OA equipment
• Other security and surveillance systems
• others

HKM01E transmits HDMI signals and USB 2.0 over a single LAN cable. - Supports a maximum resolution of 1920x1200 - Can transmit up to 120m using CAT5e/6 UTP/STP 4-pair cables *Only keyboard and mouse USB devices can be used.

• Other image-related equipment
• Other security and surveillance systems
• Other PCs and OA equipment

The FO2202C.LRX is an optical transmission receiver that transmits SD/HD/3G-SDI signals over long distances using a single optical fiber. It can transmit 1 channel of SD/HD/3G-SDI up to 20 km with single-mode optical fiber and up to 2 km with multi-mode optical fiber. You can choose the transmitter according to the input signal. The output from the receiver is a 2-way split output of the SDI signal, but you can select the transmitter based on the input signal. (For SD/HD/3G-SDI input, choose FO2210C.LTX; for HDMI input, choose FV3210C.LTX *sold separately)

• Image Transmission Equipment
• Surveillance Camera System
• others

The FO2210C.LTX is an optical transmission transmitter that transmits SD/HD/3G-SDI signals over long distances using a single optical fiber. It can transmit 1 channel of SD/HD/3G-SDI up to 20 km using single-mode optical fiber, and up to 2 km using multi-mode optical fiber. The receiver can be either the FO2202C.LRX, which can output the SD/HD/3G-SDI signal to two outputs, or the FV2303C.LRX, which can convert the SD/HD/3G-SDI signal to HDMI for output. (Sold separately)

• Image Transmission Equipment
• Surveillance Camera System
• others

VKM02 transmits VGA (analog RGB) video and keyboard/mouse signals (PC side: USB keyboard/mouse connection: PS/2) using two LAN cables! It can transmit up to 100 meters with two CAT5e/6 UTP/STP 4-pair (LAN) cables.

• Other PCs and OA equipment

VE05ALT is a transmitter that can distribute VGA (analog RGB) and stereo audio to four outputs, capable of transmitting each line up to 300 meters via LAN cable. A corresponding number of receivers are required for transmission (the high-performance receiver VE02DALS is recommended).

• Other PCs and OA equipment

The HE02P transmits HDMI and infrared remote control signals, RS232C, Ethernet, and power over a LAN cable (HDBaseT). - It supports HDMI signals up to 3840×2160p at 60Hz 4:2:0. - The maximum transmission distance is 100m for 1080p at 60Hz and 80m for 4K at 60Hz. *When using CAT6 cable.

• Other image-related equipment

The HE01SI transmits HDMI signals and infrared remote control signals over a single CAT5e/6 LAN cable. - It is also capable of transmitting signals from infrared remote controls that operate monitors and video equipment (one-way selection). - Maximum transmission distance: 720p/1080i: 60m, 1080p: 45m (CAT6)/40m (CAT5e). - It comes as a set with a transmitter (HE01SIT), a receiver (HE01SIR), an infrared receiving cable, an infrared emitting cable, and a power adapter.

• Other PCs and OA equipment

HE01SE transmits HDMI signals over LAN cables up to 40m (1080p). - LAN cables (straight-through wiring, RJ45 on both ends) can be used. - Set includes transmitter (HE01ST) and receiver (HE01SER). - HE01SER is a compact receiver that does not require an external power supply and can be directly connected to HDMI ports on monitors, etc. - Includes 1 power adapter (for transmitter/HE01ST).

• Image Transmission Equipment
• Other security and surveillance systems
• others

The 00FCf/STm-SM-ADAPTOR is an adapter that converts a single-mode fiber optic FC connector (male) to an ST connector (male). (The conversion adapter connector itself is FC female ⇔ ST male.)

• Other image-related equipment

The 00STF-SCM-SM-ADAPTOR is an adapter that converts a single-mode optical fiber ST connector (male) to an SC connector (male). (The conversion adapter itself is ST female ⇔ SC male.)

• Optical Connector

The VAD-PS-RACK is a power adapter compatible with the power distribution unit "VAD-PDU-D" for the VAD-RACK series of 19-inch rack-mounted chassis designed for optical transmission equipment. - Input: AC 100-260V 50/60Hz Output: DC 12V 60W (maximum) - AC cable included.

• Other image-related equipment

The VAD-PDU-D is a power distribution unit for 19-inch rack-mounted chassis that distributes power to multiple optical transmission devices and others. - Used in conjunction with the power adapter "VAD-PS-RACK" - Capable of distributing power to 16 modules - Can connect devices with a maximum of 120W (when connecting 2 units of the power adapter "VAD-PS-RACK") - Usable with case-type optical transmission device rack-mounted chassis such as "VAD-RACK-SD-ET"

• Other security and surveillance systems

The VAD-RACK-SD-ET is a 19-inch rack mount chassis of 3U type for optical transmission devices in case type. - It can accommodate multiple units of optical fiber transmission devices in case type. - It can house one power distribution unit "VAD-PDU-D" and up to two power adapters "VAD-PS-RACK."

• Other security and surveillance systems
• Surveillance Camera System
• others

The VAD-RACK-14-4U is a 19-inch rack mount chassis for optical transmission devices, 4U type. - It can accommodate one power distribution unit "VAD-PDU-D" and up to two power adapters "VAD-PS-RACK." - Stable operation is ensured by cooling from a large fan at the rear.

• Other image-related equipment
• Other security and surveillance systems
• others

The HD04-4K6G is a 4-way splitter that outputs the input HDMI signal to four outputs. - Supports up to 4K 60Hz 8bit 4:4:4 video - EDID supports built-in/signal pass-through/recording - HDMI signal bandwidth supports up to 18Gbps - Audio supports LPCM 7.1ch 192kHz, Dolby TrueHD, and DTS-HD MA - Supports HDCP 1.4/2.2 - Power adapter included

• Other image-related equipment
• Surveillance Camera System
• others

The GL001HP-1A is a ground loop isolator that interrupts ground loops generated through the power supply of devices operating on a DC12V power source, such as various surveillance cameras, sensors, and control equipment installed in remote locations. - It suppresses the causes of noise that affect video/communication through the power supply. - The connection terminals are a DC jack to a DC plug, allowing for easy connection between devices like cameras and the power adapter. - It is compatible with devices operating at DC12V with a maximum of 1A. - It is effective against video noise caused by ground loops and disruptions in communication of control signals such as UTC.

• Other security and surveillance systems
• Other safety equipment
• others

The TTA111HDR is an active receiver that transmits AHD/HD-TVI/HDCVI/composite video over twisted pair cable for long distances. - When combined with passive types like the TTP111HD, it can transmit AHD (720p/1080p) up to 600m/500m. - When combined with active types like the TTA111HDT, it can also transmit AHD (720p/1080p) up to 600m/500m. - It supports composite video as well. - Up to five TTA111HDR units can be connected using the included power linking cable, allowing power to be supplied from a single power adapter. - Using the optional 19-inch rack mount panel "TPN008," up to eight units can be installed in a 19-inch rack with 2U height. - A power adapter is included. *When used in combination with active transmitters like the TTA111HDT, do not use UTP cables longer than 200m, as excessively amplified signals may cause video distortion.

• Surveillance Camera System
• Image Transmission Equipment
• others

The AD001HDE is a video converter that converts AHD/HD-TVI/HDCVI and composite video (CVBS) to HDMI, VGA, and composite video (CVBS). (Simultaneous output is not possible.) - HDMI and VGA output resolutions can be set (up to 1080p). - It has a loop output that can re-output the input video signal.

• Other security and surveillance systems
• Surveillance Camera System
• others

AD001HD1 is a video converter that converts AHD/HD-TVI/HDCVI video signals to composite. - Loop output of AHD/HD-TVI/HDCVI video is possible. - The loop output can pass the UTC camera control signal to the camera side.

• Other image-related equipment
• Other security and surveillance systems
• others

The HKM02BPx-4K transmits up to 4K HDMI, bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). (Supports PoE power receiving) - The transmitter and receiver operate on PoE power. When connected using a PoE switch, no power adapter is required. - It supports input up to 2160p 60Hz (3840×2160). (The output can be converted to any resolution with a maximum of 2160p 30Hz.) - The maximum transmission distance is 150m with a CAT6 cable. - It supports control of the transmitter using RS232C. - It is compatible with HDCP 1.4/2.2. - The HDMI audio supports LPCM 7.1ch 192kHz. - It supports bidirectional analog audio calls (in unicast mode). - Bidirectional transmission of infrared remote control signals is possible. - The transmitter (HKM02BPT-4K) also supports loop output of the input video signal. - The receiver (HKM02BPR-4K) is equipped with a USB hub. * The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The HKM02Bx-4K transmits up to 4K HDMI, bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). - It supports input up to 2160p 60Hz (3840×2160). (Output can be converted to a maximum of 2160p 30Hz at any resolution.) - The maximum transmission distance is 150m with a CAT6 cable. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports control of transmitters using RS232C. - It supports bidirectional analog audio calls (in unicast mode). - Bidirectional transmission of infrared remote control signals is possible. * The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The HKM02Bx transmits HDMI signals along with bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). - It supports HDMI video signals up to 1080p 60Hz and 1920×1200 60Hz. - The maximum transmission distance is 150m using CAT6 cable. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports bidirectional analog audio calls (in unicast mode). - The transmitter (HKM02BT) also supports loop output of the input HDMI. - The receiver (HKM02BR) is equipped with a 4-port USB hub (2 USB 2.0 and 2 USB 1.1). *The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The CHB001HM transmits composite video and audio by modulating them onto an RF signal and outputs them after demodulation. It can be set for 1 to 16 channels, allowing for the transmission of up to 16 sets of composite video and audio through a single coaxial cable. The transmission distance can reach up to 600 meters (Channel 1) using 5C-2V/5C-FB cables. Additionally, since it transmits by riding on a high-frequency carrier wave, it can be used as a noise removal device against interference from electromagnetic waves, high-voltage power lines, wireless signals, elevators, motors, and more.

• Image Transmission Equipment

The GL001HDP is a device that eliminates ground loops, which are one of the major causes of noise in video signals such as AHD/HD-TVI/HDCVI/composite in surveillance camera systems, restoring clear images. Ground loops occur when two or more devices connected by video cables are connected to grounding points with different potentials. The GL001HDP suppresses the effects of ground loops with easy installation.

• Other image-related equipment
• Other security and surveillance systems
• others

The GL001HD is an active ground loop isolator (video transformer) that supports AHD/HD-TVI/HDCVI and composite video. It suppresses noise by blocking the current generated by potential differences between connected devices. Additionally, it reduces interference from power systems flowing in from surrounding equipment. The active type GL001HD is optimal for long-distance transmission of video signals as it does not cause signal attenuation when connected.

• Other image-related equipment
• Other security and surveillance systems
• others

GL001H is a low-loss type video transformer that removes ground loop noise. It is ideal for long-distance transmission wiring using coaxial cables due to its minimal attenuation of composite video signals through connections.

• Other image-related equipment

The IP02EP transmits power (DC5V or DC12V) and Ethernet over a single coaxial cable. It is convenient for using IP cameras with coaxial cable wiring. *Not compatible with PoE. The power can also be used for devices other than the camera, such as infrared illuminators, sensors, and microphones.

• LAN construction and wiring work

The IP07M transmits 10/100M Ethernet and camera power over coaxial cable or two-core cable. It supports camera installation along the wiring and can connect up to four IP cameras by linking a maximum of five IP07M units. *The IP07M is a single unit product. Two or more units (transmitter and receiver) are required for transmission. Model details: Model/IP07M: IP07M ×1 (without power adapter) Model/IP07MK: IP07M ×2 (without power adapter) Model/IP07MK-DC56V: IP07M ×2 + DC56V power adapter.

• Surveillance Camera System

UE02H transmits USB 1.0/1.1/2.0 over LAN cables for long-distance transmission (with a 4-port USB hub function). It can transmit up to 120m with CAT5e and up to 140m with CAT6. Transmission is done between UE02HT (PC side) and UE02HR (USB device side).

• Other image-related equipment
• Other PCs and OA equipment
• Other security and surveillance systems

VDL5030 is a long-distance transmission device that transmits PoE/PoE Plus Ethernet over coaxial cable up to 1,000m (30W transmission with PoE Plus/5C-FB). It supports high-speed transmission of 100Mbps in both directions, making it suitable for IP transmission of high bitrate video. It is effective when converting existing analog camera systems to IP.

• LAN construction and wiring work

The HE03-4K is a long-distance transmitter capable of transmitting HDMI signals (up to 4K) over LAN cables for a maximum distance of 140 meters. It supports HDMI signals up to 4K 30Hz YCbCr4:4:4. By using the optional receiver "HE03LR-4K," it is also possible to extend the HDMI output and transmit over two LAN cables.

• Other PCs and OA equipment
• Other security and surveillance systems
• others

HE04SEK is a 1 input 4 output CAT5e transmitter that distributes HDMI to 4 outputs and transmits via LAN cable. - Supports HDMI signals up to 1920x1080p 60Hz - Maximum transmission distance is 40m at 1080p 60Hz and 70m at 720p/1080i 60Hz *When using CAT6 cable

• Other image-related equipment
• Other security and surveillance systems
• others

APBR01 is a conversion connector with a BNC female and RCA male terminal. It allows conversion from a BNC male terminal to an RCA male terminal, or from an RCA female terminal to a BNC female terminal.

• Coaxial Connectors

The WC414-200 is a convenient cable that consolidates wiring for four video signals into a single 2-meter cable. It supports AHD/HD-TVI/HDCVI/composite video.

• Other security and surveillance systems

The WC414 is a convenient cable that consolidates the wiring for four video signals into a single cable (1m). It supports AHD/HD-TVI/HDCVI/composite video.

• Other security and surveillance systems

The JDC-2W is a cable designed to split power from an AC adapter into two outputs. - The jack employs a structure that clamps from six directions around the inside with a spring, ensuring a mechanism that is resistant to loosening and poor contact, making it difficult to pull out. - The plug uses a fork (tuning fork) type, also ensuring a mechanism that is resistant to loosening and poor contact, making it difficult to pull out. - The cable uses 24AWG and has a generous rating of 300V 3.5A.

• Other power sources

The SP006PHO is a gigabit PoE-compatible surge protector that protects LAN-connected devices from high-voltage surges such as lightning strikes (10/100/1000M, PoE++, suitable for outdoor installation). - It can be used with 10/100/1000M network devices that support PoE/PoE Plus/PoE++. - It is also compatible with various transmission devices using LAN cables. - It complies with IEEE 802.3af / IEEE 802.3at and IEEE 802.3bt standards. - It can be used with PoE devices up to 90W. - It supports both Alternative A and Alternative B. *This type requires passing the LAN cable through a waterproof box before attaching the RJ45 connector.

• LAN construction and wiring work
• Other FA equipment
• Other safety equipment

The VE02ALT is a transmitter that outputs high-resolution VGA (analog RGB) up to 1920x1200 at 60Hz and audio in a 2-way split, transmitting each system up to 300m with a single LAN cable. A separate number of receivers (VE02DALS) are required for transmission.

• Other PCs and OA equipment
• Other image-related equipment
• Other security and surveillance systems