フルテック List of Products and Services

Great news for such users!! "I want to conduct highly accurate experiments." "I want to maintain a clean, unidirectional flow of gas." "I want to increase the heating rate even further." "I want to use two units with a 1.5kW outlet." "I want to heat in an atmosphere chamber with as small a volume as possible because I want to use expensive rare gases." Introducing the fourth installment of the palm-sized electric furnace series! Equipped with high-purity transparent quartz tubes with a minimum outer diameter of 15mm (inner diameter 12mm) on both side manifolds! It weighs about 4kg and is the size of a long envelope (standard mail size)! Energy-efficient design with a 0.7kW A.C. 100V outlet! This high-performance miniature tubular atmosphere electric furnace can reach a maximum temperature of 1,200°C in about 2 minutes!

• Electric furnace
• Heating device
• Ceramics

This is a pot furnace that extracts samples from the top, allowing for easy operation and providing a simple atmosphere. The main body of the electric furnace is finished with SUS, making it highly resistant to acids. Various flow meters are also available as options. High-temperature and vacuum specifications are possible.

• Electric furnace
• Heating device
• Ceramics

This is an electric furnace made of ceramic fiber, which allows for quick heating and cooling times, making it energy-efficient and highly effective for work. It is a vertical pot furnace that cools quickly when the lid is removed. It is a high-spec electric furnace used in laboratories, offering high temperature control accuracy and high performance.

• Electric furnace
• Heating device
• Ceramics

The PSA method easily generates purity levels of up to 99.9%. By combining with a compressor, nitrogen gas can be easily produced. It is a super high-performance, large-capacity nitrogen gas generation device. 【Features】 Instead of N2 cylinders! (Since it falls outside the application range of Type 2 pressure vessels under the High-Pressure Gas Safety Act, it can be installed anywhere as long as there is a power supply) For carrier gas in various analytical instruments and purge gas for laboratories and research facilities! For heat treatment in electric furnaces! For metal heat treatment atmosphere gas, purge gas, ceramic-based, and ferrite sintering atmosphere gas! For oxidation prevention gas during welding and soldering processes! To reduce carrier gas and deoxidizers for various welding applications! For purge gas in piping and other applications! For rust prevention gas in various tanks! For dry cutting of machine tools and for filling automotive tires!

• Nitrogen Gas Generator

This electric furnace can easily achieve high capacity at 1200°C and allows for rapid heating at a low price. It comes standard with one flow meter and is suitable for various types of firing. It is very well received for use in semi-production. By using various options, it can be utilized efficiently. It is energy-saving, pursuing power and economic efficiency.

• Electric furnace
• Heating device
• Ceramics

【Features】 - Easily achievable at a low price! - Strong acid resistance due to the use of all stainless steel, creating a workspace for handling highly toxic substances, solids, and powders in the air! - The front glass can be easily removed, making it easy to load and unload large items! Various options can be attached to achieve all kinds of processing! 【Standard Equipment】 Bourdon tube vacuum gauge: 1 on the main unit, 1 on the pass box.

• Vacuum Equipment

【Features】 - Digital gas flow adjustment from 0.2 to 10 L/min! Easily set any desired flow rate in 0.1 L/min increments with the adjustment dial! The dial can be locked in place during use with a lock ring! - Easy flow adjustment for gases with different specific gravities through menu settings! It is less affected by the pressure difference of the original gas (remaining pressure in the gas cylinder), allowing for variable control in 0.1 L/min increments for consistent gas flow adjustment. - Clear LCD screen! Unlike traditional analog flow meters, the LCD screen clearly displays numerical values and the type of gas being used!

• Flow Meter

【Features】 - By connecting gas systems (optional) and vacuum devices (optional), a high-temperature vacuum tubular atmosphere furnace is completed. - A computer communication-compatible program controller with 16 patterns and 16 steps is standard equipment (32×32 programmable as an option). - Can be linked to a computer using a dedicated MPCS (optional). - Power supply is A.C. 200V 1P 4Kw energy-saving type. - Comes standard with a Bourdon vacuum gauge.

• Electric furnace
• Heating device
• Ceramics

【Features】 - Completion of the CVD system by connecting gas systems (optional) and vacuum devices (optional) - Standard equipped with a computer communication-compatible program controller with 9 patterns and 9 steps (16×16 programmable as an option) - Possible to link to a computer using dedicated MPCS (optional) - MAX 1200℃ (when using R:t/c) - Power supply is A.C. 100V 1.3Kw energy-saving type - Comes standard with a Bourdon vacuum gauge

• Electric furnace
• Heating device
• Ceramics

This is a high-performance, compact electric furnace capable of rapid heating to 1,500°C in just 30 minutes, featuring a front-loading door for easy sample retrieval. 【Features】 - Space-saving and energy-efficient. All-in-one control unit. - Equipped with a high-performance digital thyristor and program controller as standard. - Standard gas flow meter included, allowing for simple atmosphere sintering. - Spacious interior! Achieves height equal to width. - 100V model also available! No electrical work required, ready to use from the day of purchase. - Extensive research has been conducted to keep consumable costs low, achieving ultra-low prices and immediate delivery. ■□■ High-Performance Compact Electric Furnace 'FT-105' ■□■□ Regular price: ¥1,380,000, now available at a special campaign price of ¥487,654 for a limited time (3 units only). ■□■□■□■□■□■□■□■□■□■□■□■ For more details, please contact us or download the campaign catalog.

• Electric furnace
• Heating device
• Ceramics

Achieve a nitrogen/argon/oxygen/air atmosphere up to 1650°C (operational from room temperature to 1600°C) easily! Low prices and high performance are realized through cost reduction via the development of various original parts and integrated production! By selecting options, it is possible to measure the partial pressure of oxygen and adjust the PO2 in oxidizing and reducing atmospheres, enabling stable experiments at optimal values. It supports various experiments. Using a high-performance program controller with a large capacity of 16 programs × 16 segments allows for flexible control management via computer communication (compatible with Windows XP/7/8). (The 16×16 program controller is available as an option; normally, a 4 program × 7 segment controller is standard equipment.)

• Electric furnace
• Heating device
• Ceramics

The use of a two-stage molybdenum heater allows for easy attainment of 1,700°C (1,800°C with options), making it suitable for various experiments. A wide range of options is available, including computer software compatible with Windows XP/7/8. It can be used in an inert gas atmosphere such as N2 and Ar, and a forced exhaust system (optional) is also available. The standard model features a 9×9 pattern program controller, with the option to expand to a 16×16 program.

• Electric furnace
• Heating device
• Ceramics

Easily capable of reaching temperatures up to 1,200°C! This is a high-temperature tabletop tubular atmosphere electric furnace that allows for sample insertion and removal from the front. By selecting high-purity quartz tubes, high-temperature firing (melting) at 1,200°C can be achieved in a clean environment! It features a high-precision 16×16 program controller with level PID control specifications!

• Electric furnace
• Heating device
• Ceramics

Achieve precise sintering at low cost and space-saving! Ultra-fast response operation is possible with PID control using Fulltech's unique cutting-edge control technology! Standard equipped with a program controller (9×9) compatible with PC communication control. Supports complete atmosphere control with oxygen partial pressure control (monitor + control). Precise temperature atmosphere control is possible with an optional digital mass flow meter! 【Features】 - Clamped door system - Rotating SUS furnace core tube - Achieves precise sintering in a space-saving design - Ultra-fast response operation possible with PID control using Fulltech's unique cutting-edge control technology - Standard equipped with a program controller compatible with PC communication control - Supports complete atmosphere control with oxygen partial pressure control (monitor + control) - Precise temperature atmosphere control possible with an optional digital mass flow meter - Standard equipped with a rotary pump - Maximum temperature: 1000°C (up to 1500°C available as an option) - Low cost

• Electric furnace
• Heating device
• Ceramics

Maximum 1,200℃ (optional), continuous use up to 1,000℃ for 15 minutes. This is a simple atmosphere electric furnace that allows for various experiments easily in N2/Ar/O2/Air atmospheres. It is a multi-electric furnace that is equipped with options and has reduced functions of a large furnace. 【Features】 1. Low-cost options available for easy atmosphere R&D, freely selectable from 6 types according to purpose. 2. The program controller (optional) can be easily operated by anyone, allowing for simple input. 3. No-particle structure is possible with optional chamber specifications. 4. Optional connection for PO2 pressure gauge, allowing for automatic pressure control. 5. A.C. 100V low power consumption. 6. 1,700℃ specification available as an option. 7. Vacuum compatibility available as an option.

• Electric furnace
• Heating device
• Ceramics

The "FT-01X" from Furutech is a palm-sized ultra-compact electric furnace. 【Features】 ■ Rapid heating to 1,200°C in just 4 minutes! ■ Space-saving and energy-efficient "palm-sized" tabletop ultra-compact design! ■ Can be used with a 100V outlet and is an energy-saving type at 0.8Kw. ● Standard equipment includes a digital temperature controller and over-temperature prevention gauge. Temperature management is easy with the digital temperature controller! By introducing the optional program controller and management software, you can freely set the heating program time with your mouse. Using the chart function within the software improves data reproducibility and firing data management, making it even more convenient. ● For more details, please contact us or download the catalog.

• Electric furnace
• Heating device
• Ceramics

**Features** - Rapid heating to 1,200°C in just 3 minutes! - Compact and lightweight tabletop design, the smallest and lightest in the industry, saving space and energy! - Standard equipment includes a digital temperature controller and over-temperature prevention gauge. With dimensions of W110×D200×H230mm, it can be easily installed in a small space. It uses a 100V outlet and is energy-efficient at 0.8Kw. Temperature management is easy with the digital temperature controller! By introducing the optional program controller and management software, you can freely set the heating program time with a mouse, and using the chart function within the software improves data reproducibility and firing data management, making it even more convenient.

• Electric furnace
• Heating device
• Ceramics

Small models are all cheap and useless... Good news for those who seek serious performance! - Electric furnace capable of precise firing - Solid 1,200℃ - Numerous programs - High temperature accuracy Can rapidly reach 1,200℃ in just 15 minutes. The definitive high-temperature electric furnace that is space-saving, energy-efficient, and extremely low-priced!

• Electric furnace
• Heating device
• Ceramics

The Fulltech tabletop high-temperature atmosphere furnace (MOSI2 electric furnace) 'FT-1700GX' is a compact yet large-capacity electric furnace that can easily reach 1700°C and allows for rapid heating at a low price. It comes standard with one flow meter and is suitable for various types of firing. It is used for semi-production and has already received positive feedback from many companies that have adopted it. By introducing an optional web camera monitoring system, it is possible to constantly manage the firing status through a dedicated viewport + CCD + application, contributing to analysis. Efficient utilization can be achieved by using various options. The power consumption is also economical and energy-saving. 【Features】 ● Compact tabletop design ● Large capacity, supports 1700°C ● Capable of rapid heating ● Constant image management of firing status possible (web camera monitoring system required) ● Energy-saving *For more details, please download the catalog or contact us.

• Electric furnace
• Heating device
• Ceramics

The ultra-precision compact atmosphere furnace "FT-01VAC-30/50" from Furutech is a vacuum-compatible atmosphere electric furnace that is palm-sized. With the "vertical type specification kit," the electric furnace can be installed vertically or horizontally according to the experimental content or samples. 【Features】 ■ Compact and low-priced! ■ Excellent handling ■ Rapid heating and rapid cooling capabilities ■ Descent driven by a cylinder (air cylinder) ■ Operates on household outlet power, 800W energy-saving *For more details, please contact us or download the catalog.

• Electric furnace
• Heating device
• Ceramics

Good news for those struggling with low temperatures and oxidation issues with commercially available hot plates (atmospheric furnaces)! 【Features】 - A hot plate that can instantly heat up to 1000°C and allows for the introduction of atmospheric gas - Quartz hot plate capable of withstanding 1000°C - Excellent heat uniformity due to high-purity quartz plate and shot processing - Equipped with a high-precision program controller compatible with PC communication, enabling precise temperature adjustment and control

• Electric furnace
• Heating device
• Ceramics

The Fulltech tabletop compact high-temperature vacuum furnace can rapidly heat up to 1550°C in 30 minutes and is the industry's smallest and lightest vacuum furnace, saving space and energy. Typically, similar furnaces are priced over 3 million yen and are 5 to 10 times larger, but we have achieved a vacuum furnace the size of A3 paper for a minimum price of under 1 million yen! 【Features】 ■ 100V outlet specification ■ Rapid heating up to 1550°C in 30 minutes ■ Excellent heat distribution ■ Immediate delivery possible within 1 week (other manufacturers typically take 1.5 to 3 months) ■ Many optional features available (internal temperature measurement/viewing window/computer communication software/sample boat fixtures) *For more details, please contact us or download the catalog to view.

• Electric furnace
• Heating device
• Ceramics

This is a tabletop high-temperature electric furnace with a maximum temperature of 1,700°C, dimensions of 160W × 200D × 150H, and a compact body size of 350W × 500D × 650H, designed for space-saving, ultra-low price, and immediate delivery! It features a door system for easy loading and unloading of samples from the front, allowing for rapid heating up to 1,500°C in just 30 minutes. It comes equipped with a program controller compatible with PC communication control and a gas introduction unit (needle-type flow meter) for easy use. Additionally, an 1,800°C version is available as an option.

• Electric furnace
• Heating device
• Ceramics

It is a "high-performance compact simple atmosphere electric furnace" capable of simple atmosphere sintering.

• Electric furnace
• Heating device
• Ceramics

This is a horizontal tubular electric furnace that can conduct various experiments within a stable temperature range. By using options, control can be managed not only for temperature but also for gas and internal furnace pressure through computer communication, allowing for high-performance models that enable reproducible experiments. The heater uses the highly reliable Kanthal company's high-temperature heating element "Kanthal Super 1900," and the structure allows for easy heater maintenance through an upper door opening mechanism. Additionally, a compact design that does not take up much space has been achieved through a CAD-designed integrated structure. 【Features】 - Achieves precise sintering at a low cost and in a space-saving manner - Allows for precise temperature atmosphere control with a program controller and digital mass flow meter - A cost-effective 1200℃ model is available with a 100V power supply - Short delivery times are possible due to standard component configuration - A wide range of additional options is available

• Electric furnace
• Industrial Furnace
• Ceramics

High-performance digital thyristor + standard equipped program controller By combining easy operation with a dedicated electric elevator, high-temperature firing (melting) can be safely achieved in a simplified atmosphere (Note 1)! The main body of the electric furnace is excellent in acid resistance due to its SUS finish. Note 1: When equipped with a flow meter (optional) Note 2: Example of use: Ideal for glass melting, etc.

• Electric furnace
• Heating device
• Ceramics

A high-performance electric furnace that achieves large capacity, energy efficiency, space-saving design, low cost, and short delivery times at 1700℃ has finally been realized! Despite having a spacious interior measuring 400W x 500H with a depth of 460D and a large capacity of 92 liters, it features an energy-efficient design with a power consumption of only 9 kW! It comes standard with a PC communication control-compatible program controller and a gas flow meter! Maximum temperature: 1700℃ (1800℃ available as an option) Interior size: 400W x 460D x 500H Exterior size: 645W x 975D x 1570H (space-saving design!) Weight: 320 kg Power supply: 200V 3-phase 45A

• Electric furnace
• Ceramics

Achieving precise firing at low cost and in a compact space. Ultra-fast response with PID control using Fulltech's unique cutting-edge control technology. Program controller (9×9) Precise temperature atmosphere control is possible with an optional digital mass flow meter. A cost-effective 1,200°C model is also available with a 100V power supply!

• Electric furnace
• Heating device
• Ceramics

This is a pot-type electric furnace that extracts samples from the top. By easily combining it with the dedicated vacuum retort chamber for POT300, you can conveniently achieve a vacuum or various gas atmospheres without particles. It comes standard with a three-layer reflector, eliminating the need for cooling water! The electric furnace body is also finished in SUS, making it highly resistant to acids.

• Electric furnace
• Heating device
• Ceramics

◆Product Description◆ ~An electric furnace that uses high-frequency induction to achieve high temperatures in a short time~ - Rapid heating/localized heating is easy - Instant localized heating and pressing possible with a combination of high-frequency power unit and 20-ton press - Energy-efficient - Space-saving - Low cost - Short time - Data recording possible via computer and other options

• Electric furnace
• Heating device

◆Product Features◆ - Ultra-compact design allows for immediate experimentation on a tabletop. - By connecting gas systems (optional) and vacuum equipment (optional), a vacuum tubular atmosphere furnace can be completed. - Can also be used as a small vacuum furnace. - Standard equipped with a computer communication-compatible program controller with 9 patterns and 9 steps (16x16 programmable as an option). - Can be linked to a computer using dedicated MPCS software (optional). - Energy-efficient and economical. - Comes standard with a Bourdon vacuum gauge.

• Electric furnace
• Heating device

◆Product Features◆ - Capable of heating up to 1200°C (optional specification for 1300°C) with a 100V outlet - Door system for retrieving samples from the front - Ultra-compact - Energy-saving design - Easy operation combined with dedicated PC communication control allows for convenient high-temperature firing (melting) via a computer - Standard equipped with a PC communication-compatible program controller (with built-in over-temperature prevention meter) - Low price

• Electric furnace
• Heating device

◆Product Features◆ - Rapid heating up to 1700 degrees in about 45 minutes - Compact appearance that doesn't require a specific placement, yet spacious inside - Door system for sample retrieval from the front - Easy operation combined with dedicated computer communication control software allows for convenient high-temperature firing (melting) via a computer - Standard equipped with a PC communication compatible program controller *Optional: Gas introduction unit (needle flow meter type)

• Electric furnace
• Heating device

◆Product Features◆ - Compact yet large capacity: 450W × 460D × 450H (93 liters) - Energy-efficient (low running cost design) - Front-opening door for sample retrieval - Rapid heating up to 1700 degrees - Easy operation combined with dedicated PC communication control software allows for easy program input on a PC for high-temperature firing (melting) - Standard equipped with PC communication compatible program controller *Gas introduction flow meter is available as an optional selection.

• Heating device

◆Product Features◆ - Rapid heating to 1000 degrees in about 15 minutes - Door system for sample extraction from the front - Easy operation combined with dedicated PC communication control software allows for convenient high-temperature firing (melting) via PC - Maximum temperature of 1200°C with a 100V power supply (1300°C specification available as an option) - Standard equipped with a PC communication compatible program controller - Gas introduction unit with flow meter (5L/min)

• Electric furnace
• Heating device

◆Product Features◆ - Rapid heating up to 1000 degrees in about 15 minutes - Exterior made of highly corrosion-resistant and durable ALLSUS body - Front door system for sample retrieval - High-temperature firing (melting) possible with easy operation - Power supply of 100V with a maximum temperature of 1200 degrees - Gas introduction unit with flow meter (5L/min) - High-precision PID control - Equipped with digital temperature controller (fixed control)

• Electric furnace
• Heating device

◆Product Features◆ - Large capacity: Interior size (400W x 400D x 400H) - Rapid heating up to 1000 degrees in about 30 minutes - Ultra-low price - One flow meter included as standard to accommodate various firing processes - Efficient use possible by utilizing various options - Energy-saving - Usable for semi-production purposes - Easy operation + combination with dedicated PC communication control software allows for easy program input on a PC for high-temperature firing (melting) - PC communication compatible program controller / equipped with gas introduction flow meter *Available for immediate delivery

• Electric furnace
• Heating device

◆Product Features◆ ~Good news for those struggling with uneven firing in conventional tubular furnaces~ - Firing that is impossible in tubular furnaces can be achieved immediately - Ideal for powder sintering - Low price - Clamped door system - Rotating SUS furnace core tube - Precise sintering achieved in a compact space - Ultra-fast response operation enabled by Fulltech's unique cutting-edge control technology with PID control - Standard equipped with a program controller compatible with PC communication control - Supports complete atmosphere control through oxygen partial pressure control (monitoring + control) - Precise temperature atmosphere control possible with optional digital mass flow meter - Standard equipped with a rotary pump - Maximum temperature: 1000 degrees (up to 1500 degrees available as an option)

• Electric furnace
• Heating device

【Features】 - Easy to reproduce pressure and vacuum with efficient operation - Simple opening and closing with clutch door mechanism; safety design - Maximum pressure: 0.9 MPa (Type 2 pressure vessel) - Maximum temperature: 1200℃ - Computer communication control + PID program control - Standard equipped with three gas systems and MFC specifications *Cooling chiller/pressurizing compressor/PO2 system/recorder are optional settings.

• Electric furnace
• Heating device
• Ceramics

Fulltech is a comprehensive manufacturer of vacuum equipment, heating devices, and peripheral equipment, specializing in control-related technologies. We provide a consistent system from design, manufacturing, sales, delivery, to maintenance. 【Product Information】 ○ Fulltech Electric Furnace ○ Heater-related ○ Control-related ○ Instrumentation-related ○ Vacuum-related ○ Exhaust gas treatment-related ○ Firing jigs ● For more details, please contact us or download the catalog.

• Electric furnace