日本シンテック List of Products and Services

A versatile thermal anemometer ideal for controlling wind speed in air conditioning and similar applications. Available in two types: integrated body and probe, and separate body and probe. Measurement ranges include three types: 0–2, 0–10, and 0–20 m/s. Options for 0–40 m/s and 0–60 m/s types are also available. Integrated probe section: φ 12×225 mm, with flange. Separate probe section: φ 12×245 mm, with flange and 5 m cable. An option for an LCD display is also available. Output: selectable between DC 4–20 mA and DC 0–10 V (one must be specified). Body and probe material: flame-retardant polycarbonate. Probe head: made of stainless steel. Power supply: DC 24 V ±10%.

• Wind Speed/Volume Meter
• Flow Meter
• air conditioning

High safety and reproducibility, high-temperature and pressure-resistant wind speed converter. Available in two types: integrated body and probe, and separate body and probe. Measurement ranges include three types: 0–2, 0–10, and 0–20 m/s. Options for 0–40 m/s and 0–60 m/s types are also available. Measurement gas temperature is 0 to +80 °C, with a usage pressure of 10 bar. Integrated probe section: φ 12×225 mm, with R 1/2 mounting fixture. Separate probe section: φ 12×245 mm, with mounting fixture and 5 m cable included. An option with an LCD display is also available. Output can be selected from DC 4–20 mA and DC 0–10 V (one must be specified). Body material: fire-resistant polycarbonate, probe: stainless steel. ☆ Power supply: DC 8–35 V, AC 12–30 V.

• Wind Speed/Volume Meter
• air conditioning
• Flow Meter

The temperature and humidity, along with various measurement values, are displayed on an LED. The display uses high-brightness red 7-segment LEDs, making it bright with a wide viewing angle and clarity. In addition to analog signals, inputs for temperature resistance sensors, thermocouples, BCD, counters, tachometers, RS485, and more are also possible. Three sizes of character heights are available: 57mm, 84mm, and 137mm. The visibility distance is approximately 20m (for model NSD-12), about 30m (for model NSD-15), and about 50m (for model NSD-23), providing excellent readability, making it ideal for monitoring and management of various values. The case is available in 4-digit, 6-digit, and 8-digit options depending on the number of digits to be displayed. The display unit is filter-integrated, allowing for arbitrary selection of the number of display digits, making it economical. Units such as '°C', '%RH', and 'kg', as well as titles like 'Temperature', 'Humidity', and 'Weight', can be engraved, along with any custom units or titles. In addition to combined displays in 2 or 3 tiers, there is also a double-sided display type that can be viewed from both directions. Mounting brackets can be selected for either hanging or wall mounting. The power supply is AC 85-264V, 50/60Hz.

• Temperature and humidity measuring instruments
• Other process controls
• Voltage Meter

In addition to temperature and relative humidity, it is also possible to display the dew point temperature through calculation functions. Humidity + temperature, dew point + temperature, and dew point + humidity can be displayed by switching on a 2-line LCD. It features simultaneous display of maximum and minimum values, a hold function, and a backlight function. An auto power-off function allows for off time settings from 0 to 120 minutes. It is equipped with a highly reliable CMOS sensor element. Traceability certification can also be issued separately for a fee. Measurement range: Temperature -20 to +70 °C, Humidity 5 to 95 %RH. *Dew point temperature is calculated from temperature and humidity. *Power supply: 4 LR03 (1.5 V) batteries.

• Thermo-hygrometer
• Other temperature and humidity measuring instruments
• Other environmental analysis equipment

This is a temperature and humidity converter with excellent durability against high temperature, high humidity environments, and condensation. A type that measures humidity only is also available. Options include direct connection type, separated type, and duct insertion type based on application. The separated type also offers ultra-thin, compact space, and pressure-resistant sensors. High precision type with inspection certificate ±2% RH and general type ±3% RH are available. Thanks to compatible humidity sensor elements, no circuit adjustment is needed when replacing sensors. It comes with a variety of options such as waterproof and water-repellent treatment for condensation environments, dust and mist sensor caps, LED display, output cable extension, modifications for AC adapters, and traceability certification.

• Temperature and humidity measuring instruments
• Temperature and Humidity Control
• Other temperature and humidity measuring instruments

This is an LED display temperature and humidity converter using a high-durability compatible humidity sensor. It simultaneously displays relative humidity and gas temperature on the LED while providing analog output. The sensor unit can be selected from standard type, compact type, and pressure-resistant type. Thanks to the compatible humidity sensor element, no circuit adjustment is needed when replacing the sensor. There are plenty of options available, including waterproof and water-repellent processing for condensation environments, dust sensor caps, mist sensor caps, output cable extensions, and modifications for AC adapters. Issuance of inspection reports and traceability certificates is also possible.

• Temperature and humidity measuring instruments
• Temperature and Humidity Control

This is a high-precision temperature and humidity dew point converter equipped with a microcontroller. It displays gas temperature, relative humidity, and dew point temperature on an LED while providing analog output. *There is also a version without LED display. It boasts long-term stability in high humidity ranges due to the adoption of a highly durable humidity sensor. Additionally, the use of a compatible humidity sensor eliminates the need for circuit adjustments during sensor replacement. The sensor unit can be selected from standard, stainless steel, compact space, and pressure-resistant types. There are also plenty of options available, such as waterproof and water-repellent coatings for condensation environments, dust sensor caps, and mist sensor caps. Issuance of inspection reports and traceability certificates is also possible.

• Temperature and humidity measuring instruments
• Temperature and Humidity Control

A compact, wide-range, low-cost integrated temperature and humidity probe. It outputs linearly from DC 0 to 1V for relative humidity from 0 to 100% RH. There are types available with only humidity output and types with temperature output as well. It can be replaced on-site with compatible humidity sensors. The platinum temperature sensor is a high-precision A-class three-wire resistance thermometer. The standard probe length is 80 mm, with options for 200/250/350 mm available. The standard 500 mm long cable can also be extended or detached with connectors. There are many options available, including waterproof and water-repellent processing for humidity sensors in condensation environments, dust and mist sensor caps, and modifications for AC adapters. Inspection reports and traceability certificates can also be issued for an additional fee.

• Thermo-hygrometer
• air conditioning
• Temperature and humidity measuring instruments

This is an indoor temperature and humidity converter capable of analog output for temperature, humidity, and temperature-humidity. The temperature element uses a resistance temperature detector, while the humidity element employs a polymer thin-film resistive type. The temperature output can be selected from Pt 100Ω 3-wire, DC 4-20 mA/2-wire, or 4-wire, while the humidity output can be selected from DC 4-20 mA/2-wire, 4-wire, or DC 0-1 V/4-wire. The humidity sensor features a compatible connector system, allowing for field replacement. It has a lightweight and compact size of W 90×H 90×D 32 mm and weighs approximately 90 g. ☆ Measurement range: 0 to +50 °C, 5 to 95 %RH (no condensation) ☆ Power supply: DC 24 V.

• Thermo-hygrometer
• Temperature and Humidity Control
• air conditioning

This is a duct-insert type temperature and humidity converter with excellent durability against high temperature and high humidity environments, as well as condensation. Thanks to the compatible humidity sensor element, no circuit adjustment is required when replacing the sensor. It features waterproof and water-repellent processing for condensation environments, dust sensor caps, and mist sensor caps, along with a wide range of options. Issuance of inspection reports and traceability certificates is also possible.

• Temperature and humidity measuring instruments
• Temperature and Humidity Control

By equipping a dedicated outdoor shield, the sensors are protected from sunlight and wind and rain, enabling high-precision temperature and humidity measurements outdoors. A highly reliable platinum resistance temperature sensor is used for temperature measurement, while a fast-responding capacitive type is employed for humidity measurement. In addition to the temperature and humidity type, a humidity-only type is also available. DC 0–1 V/0–10 V/4–20 mA output is provided, and temperature is output via a Pt 100Ω 2-wire system. ☆ Measurement range: -30 to +70 °C, 0 to 100% RH ☆ Power supply: DC 6–30 V

• Thermo-hygrometer
• Other temperature and humidity measuring instruments
• Temperature and Humidity Control

Equipped with a microcontroller, it outputs the dew point temperature calculated from temperature and relative humidity. Measurement is possible over a wide range of -25 to +100°C and 0 to 100% RH. Two types are available: the high-precision NS-RA and the standard NS-RB. The temperature sensor uses a high-precision platinum thin-film sensor element, while the humidity sensor employs a polymer capacitive humidity sensor that remains stable even in high humidity ranges and does not require circuit adjustment during replacement. There are also abundant options such as water-repellent treatment for the humidity sensor, sintered resin sensor caps, stainless steel sensor caps, mounting flanges, and traceability certificates.

• Other temperature and humidity measuring instruments
• Temperature and Humidity Control
• Other measurement, recording and measuring instruments

By attaching a dedicated outdoor shield, the sensor is protected from sunlight and wind and rain, enabling temperature and dew point measurements outdoors. The temperature sensor uses a highly reliable platinum resistance thermometer, while the humidity sensor employs a fast-response capacitive type. *Dew point temperature is calculated from temperature and humidity. The measurement range is -20 to +80 °C and 0 to 100 %RH. Dew point temperature output supports -20 to +40 °C DP or -40 to +60 °C DP (one must be specified). The output can be selected from DC 0 to 10 V or DC 4 to 20 mA. ☆Power supply: DC 8 to 35 V, AC 12 to 30 V. *Due to the temperature and humidity calculation type, the error increases below -10 °C DP.

• Thermo-hygrometer
• Other environmental analysis equipment
• Other temperature and humidity measuring instruments

This is a capacitive dew point meter suitable for continuous measurement of compressed air and process gases. It achieves a wide measurement range of -70 to +20°C DP and quick response time thanks to the ceramic dew point sensor and microcontroller. The sensor requires minimal installation space and complies with IP65. It is mounted on a dedicated sensor block, with gas supplied from piping (fitting PT1/8). The standard sensor cable is 2m, with an option for extension up to 100m. It includes a single-point alarm for upper or lower limits (two points available as an option) and comes standard with a DC 4-20mA output. Inspection certificates and traceability proof can also be issued.

• Temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments
• Temperature and Humidity Control

This is a dew point detector that determines the moisture content in gases from the liquefaction of the gas. It has a wide measurement range, a simple structure, and is extremely easy to operate. It comes with a storage box, making it convenient for transportation.

• Temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments

This is a new type of handheld anemometer system that can connect thermal (heat) type, vane type, and vortex type sensors. It is a multi-type system that can also accept Pt 100 Ω, current, and voltage signal inputs. 【Features】 - Wide measurement range capable of measuring from 0 to 200 m/s (using thermal sensor). - Capable of measuring in environments from -40 to +500 °C (using vane sensor). - Capable of measuring in environments containing dust and mist (using vortex sensor). - Excellent durability against corrosive gases and chemicals (using vortex sensor). - Handy type with IP65 structure for easy portability. - Capable of storing 40,000 measurement data points and outputting to a computer. - Large LCD with excellent operability and touch key operation. - Two-point analog output of DC 0 to 10 V. - Memory function for average/minimum/maximum values. ☆ Power supply: 4 AA batteries or AC adapter.

• Wind Speed/Volume Meter
• Data Logger
• Recorders

The thermal (heat) anemometer NS-WT series has a sensor section that is constantly heated to a constant temperature, and when cooled by airflow, the temperature is maintained by a protective circuit. The overheating current during this process is proportional to the airflow velocity (wind speed). The temperature is measured by a thermistor sensor. There are two types available: the straight type NS-WT 110 and the L-type NS-WT 115. 【Features】 - Wind speed and temperature measurement - Airflow calculation - Low wind speed measurement - Average value calculation function - Backlight - Hold value, minimum and maximum value display - Automatic power off ☆ Measurement range: 0.15 to 30 m/s, 0 to 99999 m³/h, -20 to +80°C ☆ Power supply: 4 LR03 (1.5 V) batteries ☆ Weight: Approximately 250 g

• Wind Speed/Volume Meter
• Thermometer
• Other measurement, recording and measuring instruments

The vane-type anemometer NS-WV 110 calculates wind speed by detecting the rotation of a shaft caused by the rotation of the blades, using a proximity switch or similar device. There are three sizes of vane sensors available: NS-WV 111: φ14 mm, NS-WV 117: φ7 mm, NS-WV 110: φ100 mm. 【Features】 - Wind speed and temperature measurement - Air volume calculation - Average value calculation function - Backlight - Hold value, minimum/maximum value display - Automatic power off ☆ Measurement range: NS-WV 111 0.8–25 m/s, NS-WV 117 0.4–35 m/s, NS-WV 110 0.3–35 m/s, temperature -20 to +80 ℃ ☆ Power supply: LR 03 (1.5 V) 4 batteries, weight: approximately 390 g

• Wind Speed/Volume Meter
• Thermometer
• Other electronic measuring instruments

A cost-effective thermal wire anemometer probe. Available in three types with measurement ranges of 0-1 m/s, 0-10 m/s, and 0-20 m/s. It has no converter section, is compactly designed, and is easy to install. It boasts excellent long-term stability and high reproducibility. Ideal for environmental monitoring in air conditioning systems and clean rooms.

• Wind Speed/Volume Meter
• air conditioning
• Other process controls

A versatile thermal temperature and wind speed converter optimal for controlling wind speed in air conditioning and similar applications. It alternately displays the measured values of temperature and wind speed. Available in separate type and duct insertion type, with probe lengths of 150 mm and 300 mm. The probe has a diameter of φ13 mm, and the sensor cable can be selected as standard 2 m or 5 m/10 m. ☆ Output: Selectable between DC 4–20 mA and DC 0–10 V (specify at the time of order). ☆ Measurement range: 0–30 m/s, 0–+50 ℃. ☆ Body material: ABS resin, compliant with IP 65. ☆ Power supply: DC 24 V ±10%.

• Wind Speed/Volume Meter
• air conditioning
• Other measurement, recording and measuring instruments

The O M X series is a simple monitor designed to quantify the relative strength of odors compared to clean air, allowing you to observe changes in smell. When objectively evaluating "odors," it is necessary to express the invisible "smell" in numerical terms, especially for countermeasures against unpleasant odors or the design of fragrances. The O M X-S R M digitally displays the intensity of "odors" and identifies their types. With the ability to switch measurement ranges, it can handle concentrations from low to high with a single unit. 【New Features】 - Further increased odor sensitivity compared to the previous O M X-S R. - In addition to the digital display of odor intensity, a calendar function has been added. - A longer-lasting built-in pump has been adopted, reducing pump noise. - The dedicated software now includes an automatic graphing function and supports PC communication via USB. - New specialized models O M X-A D M/O M X-T D M have been introduced for specific odor groups. - O M X-A D M: Hydrogen sulfide / Methyl mercaptan / Ammonia - O M X-T D M: Toluene / TVOC

• Odor Testing
• Other electronic measuring instruments
• Other environmental analysis equipment

Signals from a dedicated indoor temperature and humidity CO2 meter are received and displayed on a large LED display. The CO2 value is displayed in high brightness at 58 mm, and the temperature and humidity values at 38 mm. It features a two-tier display with eye-friendly green and clearly visible red colors. Changes in facial display indicate the environmental conditions of the installation location. The main unit size is L 375 × W 200 × D 60 mm, lightweight and easy to install. ☆Power supply: AC 100–240 V. *The power for the indoor temperature and humidity CO2 meter is supplied from this display unit.

• Thermo-hygrometer
• Other measurement, recording and measuring instruments
• Other environmental analysis equipment

We offer a variety of insulated thermocouples made from materials such as Teflon (FEP, PFA), vinyl, glass, heat-resistant inorganic paint-coated glass, silica glass, and ceramics. We can accommodate K, T, E, and J type thermocouples with wire diameters of 0.1/0.2/0.32/0.65/1.0 mm, available in rolls of 100 meters, as well as small quantities, tip welding processing, and Y terminal or plug installation. *The available meters and quantities may vary depending on the insulation material, wire diameter, and type of thermocouple.

• Thermometer
• Other temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments

A large-capacity thermocouple data logger capable of storing 500,000 data points. It can connect to eight types of thermocouples: K/J/T/E/R/S/B/N. With mini plug and terminal block connection methods, you can easily connect your existing sensors. The dedicated software allows for easy operation from a computer, including starting, stopping, and downloading data. The measurement interval can be freely set between 1 second and 24 hours. The operating environment of the main unit supports a wide temperature range of -40 to +80 °C. Transferred data is displayed in numerical and graphical formats, and conversion to Excel is also possible. The battery life is approximately 10 years with a 15-minute interval, making it suitable for long-term measurements. ☆Power: One 3.6 V lithium battery.

• Thermometer
• Other measurement, recording and measuring instruments
• Data Logger

With a compact size of 150 mm in depth and weighing 1.5 kg, it can also be mounted on small panels. It features a dustproof and drip-proof structure, making it suitable for installation in harsh environments. Equipped with communication functions of RS-232 C (standard) and RS-485 (optional). Easy operation with five types of setting keys and a large LED display with a character height of 18 mm for better visibility. It supports a wide range of inputs including thermocouples, temperature measuring resistors, DC current, and DC voltage to meet various needs. Various inputs, ranges, and chart speeds can be set using keys. Each channel can have up to four alarm settings, with two upper limits and two lower limits. A portable version with rubber feet, a handle, and side panels is also available as an option. Digital accuracy: ±0.2%, recording paper feed accuracy: within ±0.1%. ☆ Power supply: AC 100 V to 240 V, 50/60 Hz.

• Recorders
• Other measurement, recording and measuring instruments
• Other electronic measuring instruments