東洋化学商会　 List of Products and Services

For lubricating metal sliding parts such as hinges and keyholes, and for preventing dirt and rust on unplated and blackened tools.

• Other consumables

Experience the three dynamic effects for yourself! 1. Scratch removal effect on the body and lens with ultra-fine alumina! 2. Water-repellent mechanism that rolls off water droplets with special resin! 3. Deep luster from the ultra-hard coating!

• Coating Agent

This product features a brush shape created by a special structure. With its unprecedented three-tiered design, the brush allows various points to contact the skin regardless of which part of the body is being brushed, effectively removing dirt while also providing a massage sensation. Additionally, by using environmentally friendly and body-safe materials (high-elasticity elastomer), you will surely be satisfied with the moist elasticity and the smooth feeling of your skin after cleansing, which you have never experienced before.

• Other safety and hygiene products

It is a powerful gas and tar remover, as well as a cleaning agent for adhering substances and foreign matter. It dissolves and removes stains from oil-based markers. After cleaning, please rinse with a regular degreasing detergent or similar product.

• Cleaning agents

Non-migratory type, optimal for various rubbers and plastics. The main component is silane-based resin. Heat resistance is up to about 400°C. Mold contamination of rubber molds is reduced, significantly decreasing the number of build-ups.

• Other consumables

It is ideal for cleaning molds and pre-treatment cleaning of resin molded products. It is a special solvent developed for the removal of oils and greases.

• Cleaning agents

It is a label remover for peeling. Please use it for gas burning of ABS, PP, styrene, etc. Use it to remove rust inhibitors and oil stains when the mold temperature is high. It serves as a powerful glaze remover for printing machine inks.

• Other consumables

Ideal for polyacetal resin, PVC resin, epoxy resin, and more! Also suitable for polyester, PP, nylon, urethane, PBT, phenol, polycarbonate, and flame-retardant ABS. For removing gas and resin stains from molds. It does not soak the mold surface, leaving no residue after use.

• Other consumables

Dry lubricant. This one product provides lubrication, rust prevention, and release. Usable temperature range is approximately -50°C to +250°C, and the color is transparent.

• Lubricants

No oils, waxes, or silicones are used at all. It is ideal for use on plastics and molded parts, as well as products with secondary processing. It provides rust prevention for over three months even when left applied.

• Rust Inhibitor

This is a non-wet type rust inhibitor. It does not seep out from the gaps of the knock pins. Removal is extremely easy!! It can be removed with just a few shots of waste firing. *There is also a colored type that is easy to identify, as the applied area appears in a dark green color.

• Rust Inhibitor

It is a non-wet type rust preventive agent. It does not seep out from the gaps of the knock pins. Removal is extremely easy!! It can be removed with just a few shots of waste shooting. The applied area turns a dark green color, making it easy to identify. *For transparent molded products, the colorless type is optimal. A colorless type is also available.

• Rust Inhibitor

Type exempt from organic solvent poisoning prevention regulations Removal of rust inhibitors from molds and cleaning of oil stains Cleaning of plastic molds, machine parts, etc. For stubborn oil stains, thoroughly soak with the liquid, wipe off with a cloth, then spray again and rinse off.

• Cleaning agents

The main component is fluorine-based resin, and it contains no silicon at all. In the case of trace application, secondary processing is possible.

• Other consumables

The main component is fluorine-based resin, and it also contains a small amount of silicon.

• Other consumables

Plant-based oil release agent (This product does not contain any silicone oil). The main component is plant-based oil.

• Other consumables

Silicone-based release agent (cannot be used for molded products with secondary processing capabilities). It is inexpensive. The main component is a low-viscosity type of silicone oil, so the molded products do not become sticky.

• Other consumables

Silicone-based release agent (cannot be used for molded products with secondary processing). It is inexpensive. The main component is a medium viscosity type of silicone oil.

• Other consumables

Silicone-based release agent (not suitable for molded products with secondary processing). It is inexpensive. The main component is a high-viscosity type of silicone oil.

• Other consumables

It contains particles that enhance lubrication without dirtying the product. The usable temperature ranges from approximately -53°C to +250°C. It is ideal as a heavy lubricant for the assembly of precision machinery! The ultra-fine spherical Teflon increases lubrication effectiveness on sliding surfaces due to its bearing-like movement. It can be used even when the can is turned upside down.

• Lubricants

It removes carbon, varnish, gum, and other dirt accumulated in the carburetor and combustion system, ensuring smooth engine operation. It is suitable for cleaning oil stains in the combustion chamber and carburetor of automobiles, ships, motorcycles, etc.

• Other consumables

It prevents troubles with the lubrication effect of the bearings, using materials that do not contain molybdenum.

• Lubricants

Even metal with some moisture attached has water-displacing rust prevention and lubrication effects. It can be used upside down. Mildly fragrant.

• Other consumables

Even metal with some moisture attached has a powerful rust prevention and anti-corrosion lubricating effect.

• Other consumables

Effective for static electricity prevention, charge prevention, and charge removal for rubber products, synthetic fibers, etc.! Can be used with transparent resin materials.

• Other consumables

- Prevents adhesives, hot melts, and rosin from adhering to cutting tools such as cutting machines, paper tools, and woodworking tools. - After spraying, the effect is enhanced by heating the formed film with a heat gun.

• Other consumables

It can be applied to all familiar components such as cylinders and pistons of worm gears, helical gears, hypoid gears, engines, pumps, compressors, and other rotating parts, fitting parts, and sliding parts.

• Other consumables

Please spray on areas where squeaking sounds occur during rotation, etc.

• Other consumables

- Cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various machine parts. - Easy cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various places. - M TYPE refers to the intermediate drying type among different types based on the speed of drying (Q TYPE dries quickly, while S TYPE dries slowly).

• Cleaning agents

- Cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various machine parts. - Easy cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various places. - Q TYPE refers to a type that differs based on the degree of drying speed, and this type dries quickly (quick-drying).

• Cleaning agents

- Cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various machine parts. - Easy cleaning of dirt such as oil, grease, metal powder, and resin powder adhered to various places. - The S TYPE refers to a type that dries slowly among different types based on the degree of drying speed.

• Cleaning agents

- It is a safe aerosol-type paint for automotive chassis. - Since it is a clear type, it does not dirty the workspace. - It has excellent gloss, providing a beautiful appearance (if repainting, please use it after it has dried). - The coverage area is approximately 4.5 square meters per can, and for a 2,000cc passenger car (one coat), about one and a half to two cans are needed as a guideline.

• Other consumables

- This aerosol-type quick-drying black coating agent for automotive chassis is excellent in gloss, blackness, and adhesion, offering good workability and cost-effectiveness. - It has minimal splatter and runs, and its rust prevention capability is outstanding. - The coverage area is approximately 4.5 square meters per can. For a 2,000cc passenger car (one coat), about one and a half cans is a rough estimate of the required amount. - If reapplying, please use it after it has dried.

• Other consumables

Since it has a low odor, it can be easily sprayed during repairs. - It maintains the chassis's rust prevention and appearance for a long time. - This aerosol-type black paint for automotive chassis is economical and excels in gloss, blackness, and adhesion. - It has less splatter and dripping compared to conventional products and offers rust prevention. - The coverage area is approximately 4.5 square meters per can, and for a 2,000cc passenger car (one coat), about one and a half to two cans are needed as a guideline. - If repainting, please use it after it has dried.

• Other consumables

The Last Blizzard instantly contracts rusted bolts and nuts with a coolant at -42°C while a high-performance penetrating oil flows into microscopic gaps, making it easier to loosen the bolts and nuts.

• Other consumables

- This is a powerful cleaning agent of the non-fluorocarbon and non-ethane type that is not subject to the Organic Solvent Poisoning Prevention Regulations. - It cleans oil and grease adhered to various parts of machinery. - It is also suitable for cleaning brakes, molds, and machine parts.

• Cleaning agents

Type exempt from organic solvent poisoning prevention regulations - This is a powerful cleaning agent of medium drying type that is not subject to the organic solvent poisoning prevention regulations. - It easily cleans dirt such as oil grease, metal powder, and resin powder that has adhered to various surfaces. - This product can also be used upside down.

• Cleaning agents

Special Coating for Restoration of Black Plastic and Rubber Surfaces 1. Reproduces degraded and whitened plastic surfaces to the same level as when new (scratches cannot be repaired). 2. Durability is approximately 2 years (depending on the environment in which it is used). 3. The application method is very simple! Easy to use! 4. Contributes to environmental protection by allowing parts to be reused.

• Other consumables

An aerosol primarily composed of silicone resin for rust prevention and lubrication of printing and binding machinery, as well as for gloss static and charge prevention agents. - Developed specifically as a lubricant and rust inhibitor for cutting machines used in the printing and binding industry. - Utilizes a special silicone fixing agent not found in other products, allowing for minimal dispersion of silicone during spraying. - Contains no flammable substances such as petroleum or alcohol, and is not subject to storage regulations under fire safety laws. - Emphasizes safety and functionality. - Demonstrates high performance beyond the aforementioned applications.

• Other consumables