東洋電機 List of Products and Services

The "SOT-SP801/SP803 series" is a parallel-type spatial light transmission device. The transmission method is half-duplex bidirectional, alternating between sending and receiving, designed for 8-bit data. Each parallel data transmission can be performed. The input/output indicator lights are red (IN) and green (OUT), matching the SOT-NP. An additional indicator light for M/L (formerly M/S) signals has been added, making it easier to confirm settings. This is a new type that is smaller and lighter than the SOT-NP series. *For more details, please refer to the PDF document or feel free to contact us.*

• VPN/Wide Area Ethernet
• Remote Control
• controller

This is an ideal transformer for self-consumption solar power generation systems. We are committed to expanding environmentally friendly products, including SustainaTRANS*. *Trademark Registration No. 6782254 【SustainaTRANS】

• Transformers

This is an ideal transformer for self-consumption solar power generation systems. We are working on expanding environmentally friendly products, including SustainaTRANS*. *Trademark Registration No. 6782254 【SustainaTRANS】

• Transformers

The RP Paracon is a new type of SCR (Silicon Controlled Rectifier) based AC power controller. It is a next-generation all-in-one model with five high-performance features that far surpass conventional models. 1. Comprehensive control functions included 2. Communication capabilities via built-in digital settings 3. Compliance with CE standards (20A to 150A) and RoHS2 4. High versatility with free power supply compatibility 5. Excellent maintenance and fault diagnosis It is suitable for fine and flexible control, simplification of maintenance parts and arrangements, and overseas projects.

• Temperature and Humidity Control

When promoting a project, do you find that meetings take a lot of time? For example, in instrumentation projects, do you struggle with coordinating meetings for software and hardware? Our one-stop solution accelerates project progress. We provide comprehensive support for software, hardware, and on-site adjustments.

• Instrumentation and Control Systems

We are working on expanding environmentally friendly products, starting with SustainaTRANS.

• Transformers

The TMF2 series is a molded transformer that enhances environmental resistance and flame retardancy for greater safety. The cable connection section comes standard with a terminal block equipped with a protective cover. The cast-less design allows for flexible responses to customer needs. We provide models suitable for the rated specifications. By eliminating the voltage switching tap, it becomes more affordable. Reducing losses and ensuring safety! Specifications: - Model: TMF2 - Applicable standard: JEC-2200-2014 - Heat resistance class: F - Phases: Single-phase, three-phase, Scott *For detailed specifications, please feel free to contact our sales department.

• Transformers

Are you struggling with a shortage of manpower on-site? Collaborative robots have the following features that can help improve labor shortages when implemented: - Excellent at repetitive tasks - Flexible in adapting to changes in work processes - Capable of working in the same space as humans As an example of utilizing collaborative robots for repetitive tasks, we would like to introduce the use case of sensor performance testing. Our company assists in building systems that utilize robots.

• Articulated Robot
• Other inspection equipment and devices

The "Toyo Paracon XP Series" from Toyo Electric is a single-phase and three-phase AC power controller ideal for thermal control in continuous furnaces and distributed electric furnaces. It standardizes functions such as current limiting, overcurrent detection, fast-blow fuses, and thyristor abnormalities. Additionally, it is equipped with abnormal detection functions and abnormal output, making maintenance easier through a 7-segment display. Both single-phase and three-phase models are available in 11 different rated current values ranging from 20A to 600A, catering to various fields such as the steel industry, semiconductor industry, and ceramics industry. 【Features】 ■ A wide variety of models available ■ High functionality offered as options ■ Enhanced standard equipment ■ Strong and slim compact structure ■ Sheet key setting device to support maintenance *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control
• controller
• power supply

At Toyo Electric, we manufacture and sell "transformers" with a focus on ease of use and a rich lineup. Our offerings include lightweight and compact "dry-type transformers," "low-voltage insulated transformers" for solar power systems, and "lightning-resistant transformers SIT" that reduce lightning surges. Additionally, we provide "starting reactors" used to prevent shock during startup when the power capacity is small and cannot withstand the full voltage starting current. 【Features】 ■ Pursuit of ease of use ■ Extensive lineup ■ Environmentally friendly, compliant with RoHS directives *For more details, please download the PDF or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Amorphous Dry Transformer" is a transformer that utilizes an amorphous core, significantly reducing standby power consumption. In transformers, which experience two types of electrical losses known as "load loss" and "no-load loss," this product is specifically designed to reduce the loss that occurs continuously in the receiving state, known as "no-load loss (standby power)." Since transformers are used for long periods, minimizing standby power can lead to significant energy-saving effects. 【Features】 ■ Heat resistance class H ■ Compliant with the revised Energy Conservation Law ■ Significant reduction in standby power (no-load loss) ■ Utilizes an amorphous core *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The LCC Series (SIT: Surge Isolation Transformers) is a power supply device that attenuates lightning surges generated by lightning strikes, allowing for safe power supply to sensitive electronic equipment. It pursues high-level dielectric strength performance and achieves high performance. It attenuates common mode lightning surge voltage that enters from the input side to below 1/1000 (-60dB). For single-phase models under 3kV, it is equipped as standard with a function to attenuate normal mode (unbalanced) surge voltage to -30dB to -20dB (10kV impulse voltage). 【Features】 ■ Attenuates common mode lightning surge voltage entering from the input side to below 1/1000 ■ Attenuates normal mode surge voltage to -30dB to -20dB ■ Pursues high-level dielectric strength performance ・30kV〈1.2/50μs〉 (between input and output/ground) ・10kV〈1.2/50μs〉 (between output and input/ground) *For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• power supply
• Distribution Board

In our "Engineering Division," we are engaged in product and component development, as well as system technology, power technology, and expanding our business overseas (in China). With the motto of "Contributing to society through technology and quality," we have utilized our long-cultivated skills in numerous plants and machinery over the years. With our rich experience and achievements, we aim to create new electronics products and systems that contribute to a more comfortable and safe living environment, responding to various needs. 【Business Activities】 ■ Product and Component Development ■ System Technology ■ Power Technology ■ Overseas (China) Business *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems
• Other inspection equipment and devices
• Control Panel

The "MRC-412/413 Series" from Toyo Electric is a device that controls conveyors driven by energy-saving DC brushless motors, featuring simplified wiring and various operating modes. By controlling four motors for conveyor drive with a single MRC unit, it achieves space-saving, low cost, and high functionality. It comes standard with various operating modes and allows for user-specific control from a PLC. 【Features】 ■ Control and monitoring can be performed using CC-Link. ■ Smooth speed control via microcontroller. ■ Speed setting using a digital method. ■ Brake output/servo lock control is possible. ■ Up to 8 input points and 4 output points are available for user use. *For more details, please download the PDF or feel free to contact us.

• Substrate transport device (loader/unloader)
• Other conveying machines
• Transport and handling robots

The "SOT Series" from Toyo Electric utilizes infrared technology to transmit data between devices without cables. Since it uses infrared as the transmission medium, it is not affected by electrical noise or magnetic interference. It demonstrates stable performance even in environments prone to disruptions, such as factories and areas around motors. With various options available for transmission distance, capacity, speed, and interface, it can be selected according to specific purposes, such as crane control or unmanned transport vehicle communication systems. 【Features】 ■ No cables required ■ Resistant to radio interference ■ Transmission method can be selected based on purpose ■ For unmanned transport vehicle communication systems ■ For systems in welding assembly lines *For more details, please download the PDF or feel free to contact us.

• Remote Control
• controller
• VPN/Wide Area Ethernet

The "Low Voltage Insulated Transformer for Grid Connection of Solar Power Generation Systems" is a low voltage insulated transformer installed between the power conditioner and the low voltage distribution line in solar power generation systems. It comes in an outdoor installation case compliant with IP23, and it can also accommodate IP34 for rooftop outdoor installation when the bottom of the case is not open. Additionally, it can be manufactured with lightning protection specifications, and it is also possible to produce it using amorphous transformers that significantly reduce standby power. Furthermore, a monitoring system utilizing wireless (ZigBee) technology can also be proposed. 【Features】 ■ Outdoor installation case compliant with IP23 ■ Can also accommodate IP34 for rooftop outdoor installation ■ Lightning protection specifications can also be manufactured ■ Can be produced using amorphous transformers that significantly reduce standby power ■ Proposal of a monitoring system utilizing wireless (ZigBee) technology is possible *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Rack-Mounted Lightning Surge Isolation Transformer" is a rack-mounted device designed to attenuate lightning surges in systems such as information communication systems and surveillance camera systems. The "TRM Series" (SIT: Surge Isolation Transformer) has high protection characteristics and reduces common mode lightning surge voltage that enters from the input side to below 1/1000 (-60dB). Additionally, it achieves an ultra-thin rack mount type that is a perfect match for 19-inch racks. 【Features】 ■ Best match for 19-inch racks ■ Compliant with both JIS and EIA standards ■ Provides high protection characteristics ■ Achieves ultra-thin rack mount type (0.5kVA and 1kVA are 2U (88mm), 2kVA and 3kVA are 3U (132mm)) *For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Disaster Prevention Wireless Type Lightning-Proof Transformer" (SIT: Surge Isolation Transformer) is a transformer designed to protect outdoor equipment, such as power panels for communication equipment, disaster prevention systems, and environmental monitors, from lightning damage. With years of experience and technology, it offers high surge protection performance. Additionally, it features a breaker with an automatic reset mechanism that, when tripped instantly, will not reset if deemed abnormal, and can also notify of abnormalities via alarm contacts. 【Features】 ■ Protects outdoor equipment from lightning damage ■ Impulse withstand voltage for the entire system, including the automatic reset device, is 10 or 30 kV (1.2/50μs) ■ Surge transfer rate for the entire system, including the automatic reset device, is below -60dB (1/1000) ■ Incorporates a breaker with an automatic reset mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Thin Type Surge Isolation Transformer (SIT) Built-in Power Supply Protection Device" has achieved integration between the incoming panel and the surge isolation transformer (SIT). With years of experience and technology, it offers high surge protection performance. Additionally, it employs a breaker with an automatic reset mechanism, which does not reset if it determines an abnormal condition after an instantaneous trip, and it can also notify of abnormalities via alarm contacts. *For more details, please refer to the PDF document or feel free to contact us.

• Transformers

The "TKH4 Series" is a heat-resistant class H transformer with a lightweight and compact design. We offer high-quality solutions at reasonable prices, with short delivery times, ease of use, and a wide variety of models to meet various needs. 【Features】 ■ Extensive lineup ■ Pursuit of ease of use ■ Pursuit of low cost ■ Pursuit of short delivery times ■ Environmentally friendly, compliant with RoHS directives *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "TYD Series" is a dry self-cooling dry transformer. It can be used indoors at ambient temperatures of -5 to 40°C, and we offer primary voltages of 100V, 200V, and 400V. 【Specifications】 ■ Cooling Method: Dry self-cooling ■ Normal Operating Conditions - Indoor use, ambient temperature: -5 to 40°C (daily average below 35°C, annual average below 20°C) - Altitude: Below 1000m ■ Applicable Standards: JIS C 6436, JIS C 5310 ■ Insulation Type and Temperature Rise Limits - Type A: 60K (30VA to 75VA) - Type E: 75K (100VA to 3kVA) - Type B: 80K (4kVA to 5kVA) ■ Installation Location: Indoor operation panels, housed within control panels *For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Slim Dry-type Transformer" is a space-saving transformer that minimizes depth dimensions to the extreme. It does not require storage or installation space for power transformers of various machines, molding machines, and precision equipment. 【Features】 ■ Space-saving with minimized depth dimensions ■ Does not require storage or installation space for power transformers of various machines, molding machines, and precision equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Ultra-thin Dry-type Transformer (with case)" is a space-saving transformer designed with an ultra-thin compact design featuring a depth of 100mm. It comes in a case that emphasizes safety. It does not require storage or installation space for various machines, molding machines, and precision equipment. 【Features】 ■ Achieves an ultra-thin compact design with a depth of 100mm ■ Transformer in a case that prioritizes safety ■ Space-saving *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "K-rate transformer (for harmonic countermeasures)" is a transformer designed with consideration for abnormal heating caused by the generation of harmonics. It complies with UL-1561 21.1.4 (temperature rise). The design is lightweight and compact, taking into account the effects of harmonics from servers on transformers, as well as the increased load losses in windings due to the skin effect, eddy current losses, and the increase in N-phase current. Additionally, it is widely adopted in domestic Internet Data Centers (iDC) and is designed to prevent abnormal heating even when harmonics are present. [Considerations in the design] ■ Effects of harmonics on transformers ■ Increased load losses in windings due to the skin effect ■ Increased eddy current losses ■ Increase in N-phase current *For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Molded Transformer" is a transformer that enhances environmental resistance and flame retardancy, prioritizing safety. It pursues low noise levels and is equipped with vibration-damping rubber as standard. The cast-less design allows for flexible responses to various needs, providing the most suitable products for specifications at low costs. It is compact and lightweight, making it easy to store in a cubicle, and by adopting a high-grade core, it achieves energy savings. 【Features】 ■ Safety-focused design ■ Flexible response to various needs through cast-less design ■ Compact and lightweight for ease of handling and energy efficiency ■ Comprehensive options available *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

The "Z Series (H Type - For High Pressure / Low Pressure)" is a reactor designed to suppress the starting current of motors. In addition to pursuing simplicity and ease of use, it is an environmentally friendly product compliant with the RoHS directive. It is used when the power supply capacity is small and cannot withstand the full voltage starting current, or when it is necessary to prevent shock during startup, particularly in cases where excessive starting current affects the power supply. 【Features】 ■ The smaller the starting current, the smaller the starting torque. ■ Starting current can be changed by tap values. ■ The increase in torque is significantly large. ■ The maximum torque is the largest among reduced voltage starting methods. ■ Smooth acceleration can be achieved. *For more details, please refer to the PDF materials or feel free to contact us.

• Transformers
• power supply
• Distribution Board

In an increasingly advanced information-oriented industrial society, the networking of information, the rationalization of operation and maintenance, and the compactness of equipment are being demanded across a wide range of fields. Through our control centers, Toyo Electric aims to continuously build new technologies that excel in reliability, safety, and ease of handling for the opening, protection, monitoring, and control of low-voltage circuits, responding to our customers' requests. Our control centers meet diverse customer needs while excelling in high reliability, safety, and maintainability.

• Other water treatment equipment
• Generators and transmission motors
• Control Panel

"IPR" stands for Integrated Protect Relay, which is a multi-relay that incorporates all the elements necessary for motor control. With comprehensive protection features such as overcurrent, instantaneous overcurrent, phase loss, ground fault, and undercurrent, it can accommodate motors for various applications. It displays various status indicators such as operation, stop, and abnormalities, as well as measurement data like current values and simplified electrical energy. Additionally, it allows for testing of protection functions such as overcurrent, ground fault, and phase loss, making it easy to simulate abnormal conditions. 【Features】 ■ Comprehensive monitoring and protection functions ■ Reduced wiring through simple ladder programming functionality ■ High reliability with CC-Link simple redundancy communication ■ Pursuit of space-saving design, achieving ultra-thin structure ■ High flexibility in parameter settings transferable from a computer *For more details, please refer to the PDF materials or feel free to contact us.

• Database
• Other core systems
• controller

At Toyo Electric Co., Ltd., which engages in engineering business, we handle various development boards. The "Power Control Board" is a board that controls voltage in the range of 15V to 24V based on instructions from external FPGAs or microcontrollers. This board can control five circuits simultaneously. Our company supports everything from circuit design to embedded software development, providing development tailored to our customers' needs. 【Features】 ■ Number of control circuits: 5 circuits ■ Input voltage: 24V ■ Output voltage range: 15V to 24V *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Circuit board design and manufacturing
• Control Panel

At Toyo Electric Co., Ltd., which engages in engineering business, we handle various development boards. The "DC24V Heater Control Board" is a remote I/O unit that notifies the PLC of the input signals collected from thermocouples and performs temperature control based on the PLC's instructions. Our company supports everything from circuit design to embedded software development, providing development tailored to our customers' needs. 【Features】 ■ External Interface - CC-Link ×1ch - IO Port ×10ch ■ Thermocouple Input ×10ch *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Circuit board design and manufacturing
• Control Panel

At Toyo Electric Co., Ltd., which engages in engineering business, we handle various development boards. The "High-Speed Optical Data Processing Board" samples large amounts of data from the upper layer at high speed and converts and transmits it into optical data according to requirements. Our company supports everything from circuit design to embedded software development, providing development tailored to customer needs. 【Features】 ■ External Interface - Optical Input/Output SFP (3.125Gbps) × 3 channels - PCI Express Gen1 × 4 ■ Equipped with FPGA *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Circuit board design and manufacturing
• Embedded Board Computers

At Toyo Electric Co., Ltd., which engages in engineering business, we handle various development boards. The "High-Speed Optical Serial to Parallel Conversion Board" rapidly converts optical serial data into parallel format and sets information to other boards. Our company supports everything from circuit design to embedded software development, providing development tailored to customer needs. 【Features】 ■ External Interfaces - Optical Input/Output SFP (3.125Gbps) × 3 channels - Parallel Input/Output × 10 channels - Ethernet × 1 channel ■ Equipped with FPGA *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Circuit board design and manufacturing
• Embedded Board Computers

The "Train Approaching Announcement Device" is a broadcasting device that activates the voice synthesis unit using the train approaching signal (voltage-free contact) from the signal, and announces the approach of trains on the platform. The input circuit method of this product uses a photocoupler input, and the voice synthesis method adopts ADPCM (it is also possible to play sound using Wave files). Additionally, the settings for nighttime volume and the suspension of late-night broadcasts can be automatically managed by a timer. 【Features】 ■ Order of broadcast operations - Wireless broadcasting - Approaching announcements - BGM, etc. ■ Automatic setting of nighttime volume and late-night broadcast suspension via timer *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Unmanned Station High Voice Telephone" uses a dedicated line in a one-to-one combination of a parent device (desktop control panel) and child devices (wall-mounted AMP) to select and broadcast to multiple child devices or specific child devices. The communication distance of this product is up to 25 km. By installing the parent device at a manned station and the child device at an unmanned station, it is possible to inform passengers at the unmanned station about train operation status and other information via voice. 【Features】 ■ Uses a dedicated line to select and broadcast to multiple child devices or specific child devices ■ Capable of informing passengers at unmanned stations about train operation status via voice from a manned station ■ By adding optional units, it is also possible to use the transmission line simultaneously *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Communication High-Volume Telephone (Talkback)" is an intercom-style communication device that digitizes both voice signals and switch information between the main control panel and the control unit. This product allows for communication with up to 60 sub-units per control panel. If two control panels are used, up to 120 sub-units can be connected. 【Features】 ■ Digitizes both voice signals and switch information (the connection between the control unit and the communication sub-units uses analog signals) ■ Allows communication with up to 60 sub-units per control panel (with two control panels, up to 120 sub-units can be connected) ■ The connection between the operation panel and the control panel requires only two wires for digital transmission and two wires for power supply (DC24V) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Transportation Store Arrival Management System" is a system that displays and manages the operational status of newspaper transportation trucks. It plots GPS information obtained from onboard terminals onto a map, showing the location. It displays sales locations in chronological order on the screen, indicating their positions with points, allowing for easy confirmation of arrival times at a glance. Additionally, by linking with the address system, it can automatically acquire transportation information, reducing the hassle of information registration. 【Features】 ■ Displays and manages the operational status of newspaper transportation trucks ■ Allows for easy confirmation of arrival times at a glance ■ Reduces the hassle of information registration by linking with the address system ■ Sends arrival delay information via email or fax ■ Onboard terminals can be installed with a single touch *For more details, please refer to the PDF materials or feel free to contact us.

• Database
• Other operation management software
• Integrated operation management

The "Equipment Monitoring Information System" collects the operational status of on-site equipment using a "logging device" and distributes the data to "maintenance personnel" and "offices" located remotely via the internet. By enabling multiple connections from providers, it enhances data security. It notifies abnormalities via mobile phone email, allowing for tracking the time elapsed until the abnormality occurs, which aids in failure analysis and decision-making. Additionally, the operational status of the equipment can be automatically collected every day. Management software allows for the creation of reports tailored to the user. 【Features】 ■ Enhances data security ■ Notifies abnormalities via mobile phone email ■ Daily automatic collection of equipment operational status ■ Reports can be created according to user specifications *For more details, please refer to the PDF document or feel free to contact us.

• Database
• Other security and surveillance systems
• Other process controls

The "Online Address Printing System" is a system technology that supports streamlining and speeding up processes. With a wide range of delivery options, it meets diverse newspaper printing needs. Additionally, it supports offline address paper printing with page printer output. It works in conjunction with upper data management, circulation management, and quantity management. 【Features】 ■ Supports streamlining and speeding up processes ■ Abundant delivery options ■ Manual support ■ Reprinting function *For more details, please refer to the PDF materials or feel free to contact us.

• Printing Machinery
• Other core systems
• Embedded system design service

The "High-Speed Data Transmission System" samples data from the upper levels at high speed and outputs data in real-time while processing the rearrangement of data according to the timing required by the device. If you have concerns such as "I want to output a large amount of data from this device at high speed, what should I do?", our high-speed data processing provides total support. 【Features】 ■ Utilization of embedded technology ■ High-speed processing with FPGA ■ High-speed transmission via LVDS1 and optical methods ■ Total number of circuit boards: 224 boards per system *For more details, please refer to the PDF materials or feel free to contact us.

• Database
• Other core systems

Our technical staff will assist in realizing your company's requests. We would like to provide an example of our past delivery achievements. ● Related to System Engineering - Newspaper production system - Conveyance control system - Image processing system - Inspection equipment - Equipment monitoring system - Dynamic management system ● Related to Product and Component Development - Field network application products - High-speed data transmission system - List of development boards ● Related to Mechatronics - Address label printing machine - Pre-printed address label printing machine

• Control Panel
• Other conveying machines
• Testing Equipment and Devices

The "SOT-US160 series" is a spatial optical transmission device that enables wireless Ethernet connections via optical communication, allowing for high-capacity communication without compromising quality. In the case of a transport control system, the cart side can be connected to the same network as the ground side, enabling real-time communication. Additionally, if it is a sequencer control system on the same network, it allows not only for regular data communication but also for program verification and changes on the moving side, thereby improving maintainability. 【Features】 ■ Transmission speed: 100 Mbps ■ Ethernet compatible ■ High-capacity communication without compromising quality ■ Uses near-infrared LEDs to achieve a communication distance of 100 meters ■ Improved maintainability *For more details, please refer to the PDF document or feel free to contact us.

• others
• Other security and surveillance systems

The "SPC-MX/SX series" is a signal transmitter that can transmit a large number of input and output signals using a small number of signal lines. With one main unit, it can transmit signals for up to 32 points for both input and output. Up to three sub-units can be added, allowing for expansion in increments of 32 points for both input and output, with a maximum of 128 points each. Using our company's "RS-422" interface-equipped spatial optical transmission device, wireless signal transmission is possible. Additionally, it can directly transmit signals to devices with a serial interface, such as computers. 【Features】 ■ Capable of transmitting a large number of input and output signals using a small number of signal lines ■ One main unit can transmit signals for up to 32 points for both input and output ■ Up to three sub-units can be added ■ Expansion is possible in increments of 32 points for both input and output, with a maximum of 128 points each *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet
• Remote Control
• controller

The "SOT-NP1601/NP1603 series" is a space optical transmission device that supports half-duplex bidirectional or unidirectional parallel communication, transmitting and receiving alternately. It allows switching between bidirectional and unidirectional transmission through a mode switch input. It transmits 16-bit parallel data for both input and output. The installation uses a direct mounting method, and the input and output indicator lights are set to IN (red) and OUT (green), making maintenance easier. 【Features】 ■ Bidirectional and unidirectional transmission can be switched via the mode switch input ■ Transmits 16-bit parallel data for both input and output ■ Transmission distances available in two types: 0-1m and 0-3m ■ Direct mounting method is adopted for installation ■ Protection structure is IP64 class *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet
• Remote Control
• controller

The "SOT-GS508/GS808/GS1508 series" is a data transmission device that supports a full-duplex bidirectional RS-485 (tristate) interface. It adopts a switching method that supports transmission speeds of 2400bps, 4800bps, 9600bps, and 19200bps. Additionally, to prevent mutual interference, it offers four types of different transmission and reception frequencies that can be selected. 【Features】 ■ Supports full-duplex bidirectional RS-485 (tristate) interface ■ Enables 1:N communication through multi-drop connection ■ Transmission distances of 50m/80m/150m in a straight line ■ Uses a connector method for connection with external devices ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet
• Remote Control
• controller

The "SOT-GS50/80/150 series" is a data transmission device that supports full-duplex bidirectional RS-232C or RS-422 interfaces. It adopts a connector method for connecting to external devices, making maintenance easy. Additionally, to prevent mutual interference, it offers four types of different transmission and reception frequencies that can be selected. 【Features】 ■ Supports full-duplex bidirectional RS-232C or RS-422 interfaces ■ Transmission speed can reach up to DC–38.4Kbps for high-speed transmission ■ Transmission distances of 50m/80m/150m in a straight line ■ Uses a connector method for connecting to external devices ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• VPN/Wide Area Ethernet
• Remote Control
• controller