シー・エム・ティ Product Lineup

This document explains the basic knowledge of sample grinders, specifically the "causes of variability in grinding results." It includes points such as "the possibility that the clamping force of the equipment has decreased over time" and "wear of the grinding container and lot due to aging." There are also specific examples and images included, so please feel free to use this as a reference material. [Contents] ■ The possibility that the clamping force of the equipment has decreased over time ■ Wear of the grinding container and lot due to aging ■ Deterioration of rubber products inside the equipment ■ Cases where the amount of sample being fed is not appropriate *For more details, please refer to the PDF document or feel free to contact us.

• Technical and Reference Books

The TI series is designed and manufactured with ease of use as its motto, serving as a high-performance, high-quality sample grinding machine that replaces mortars and various types of grinders. It significantly improves the efficiency of sample preparation for chemical analysis, particularly for instrument analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small quantities of powdered materials. This machine achieves vibration acceleration that reaches ten times the force of gravity, vibrating one or two grinding containers, and rapidly pulverizing materials through the impact of special rods inserted into the containers. Additionally, the shape of the rods and the vibration conditions are selected from numerous test results to ensure a combination that allows for precise work, which can be entrusted to the machine instead of manual grinding with a mortar. 【Features of the device】 ■ Short grinding time ■ Suitable for various grinding samples ■ No large particles produced ■ Minimal contamination with impurities ■ Simultaneous grinding of two samples ■ Low noise and vibration during operation 【Examples of input samples】 Coffee, nuts, plastics, medicinal herbs, chemicals, soil, flour, construction materials, sand, seeds, grains, powdered detergents, fertilizers, iron powder, minerals ◎ For more details, please download the materials or contact us.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency, high-performance sample grinder that replaces mortars and various types of grinders. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly in instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as in the grinding of small quantities of powders and granules. ■ Short grinding time ■ No restrictions on the type of sample being ground ■ No large particles produced ■ Minimal contamination with impurities ■ Ability to grind two samples simultaneously ■ Low noise and vibration during operation 【When grinding paper pulp】 Sample: Paper pulp Raw material particle size: 3.5 to 7 mm ・Model used: TI-300 ・Container used: 250 ml stainless steel container ・Rod used: Type A Grinding time & results 　Time: 5 min 　Particle size: 200 mesh, 100% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency and high-performance sample grinder that replaces mortars and various types of crushers. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly for instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small quantities of powders and granules. ■ Short grinding time ■ No restrictions on the type of sample being ground ■ No large particles produced ■ Minimal contamination with impurities ■ Ability to grind two samples simultaneously ■ Low noise and vibration during operation 【When grinding plant stems】 Sample: Plant stems Raw material particle size: 3.5–7mm ・Model used: TI-300 ・Container used: 250ml stainless steel container ・Rod used: Type B Grinding time & results 　Time: 5min 　Particle size: 200 mesh 100% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as a motto, and it is a high-efficiency, high-performance sample grinder that serves as an alternative to mortars and various types of crushers. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly for instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small quantities of powders and granules. ■ Short grinding time ■ No restrictions on the type of sample being ground ■ No large particles produced ■ Minimal contamination with impurities ■ Two samples can be ground simultaneously ■ Low noise and vibration during operation 【When grinding coke】 Sample: Coke Raw material particle size: 3.5–7mm ・Model used: TI-300 ・Container used: 250ml special copper container ・Rod used: Type A Grinding time & results 　Time: 2.5min 　Particle size: 200 mesh, 85% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency and high-performance sample grinder that replaces mortars and various types of crushers. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly for instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small quantities of powders and granules. ■ Short grinding time ■ No restrictions on sample types ■ No large particles produced ■ Minimal contamination with impurities ■ Simultaneous grinding of two samples ■ Low noise and vibration during operation 【In the case of grinding hay】 Sample: Hay Raw material particle size: 1–5.5mm ・Model used: TI-200 ・Container used: 50ml steel container ・Rod used: Type A Grinding time & results 　Time: 5min 　Particle size: 200 mesh, 100% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency and high-performance sample grinder that replaces mortars and various types of grinders. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly in instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as in the grinding of small quantities of powders and granules. ■ Short grinding time ■ No restrictions on the type of sample being ground ■ No large particles produced ■ Minimal contamination with impurities ■ Ability to grind two samples simultaneously ■ Low noise and vibration during operation 【When grinding quartz sand】 Sample: Quartz sand Raw material particle size: 1–3.5mm ・Model used: TI-100 ・Container used: 10ml tungsten carbide container ・Rod used: Type A Grinding time & results 　Time: 3min 　Particle size: 200 mesh, 97% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency, high-performance sample grinding machine that replaces mortars and various types of grinders. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly for instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small amounts of powders and granules. ■ Short grinding time ■ No restrictions on grinding samples ■ No large particles produced ■ Minimal contamination with impurities ■ Simultaneous grinding of two samples ■ Low noise and vibration during operation 【When grinding chalcopyrite】 Sample: Chalcopyrite Raw material particle size: 1–3.5mm ・Model used: TI-100 ・Container used: 10ml stainless steel container ・Rod used: Type A Grinding time & results 　Time: 2min 　Particle size: 200 mesh, 95% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The TI series is designed and manufactured with ease of use as its motto, serving as a high-efficiency, high-performance sample grinding machine that replaces mortars and various types of grinders. It significantly improves the efficiency of sample preparation associated with chemical analysis, particularly for instrumental analyses such as X-ray analysis and atomic absorption analysis, as well as for grinding small amounts of powders and granules. ■ Short grinding time ■ No restrictions on the type of sample to be ground ■ No large particles produced ■ Minimal contamination with impurities ■ Two samples can be ground simultaneously ■ Low noise and vibration during operation 【When grinding glass beads】 Sample: Glass beads Raw material particle size: 1–3.5mm ・Model used: TI-100 ・Container used: 10ml tungsten carbide container ・Rod used: Type C Grinding time & results 　Time: 3min 　Particle size: 200 mesh, 97% pass ◎ For more details, please contact us or download the catalog.

• Crusher

The "FT Series" has been developed as a mechanical agitation and gas suction type flotation machine, featuring a structure similar to the widely used agitator-type flotation machines. As a testing device, it incorporates unique innovations for controlling the stirring blade speed, switching the introduced gas, regulating the flow rate, and the attachment and detachment mechanism of the flotation tank, ensuring that accurate data can be obtained with meticulous attention to detail. Additionally, the flotation tank is available in transparent acrylic resin and stainless steel (SUS304), allowing for selection based on application. 【Features】 ■ It is possible to introduce any desired gas from the outside by switching the controls. ■ The gas flow rate is controlled with extreme precision using a precision control valve. ■ The stirring blade is driven by a genuine servo-controlled motor, allowing for stepless speed variation. ■ The flotation tank and the expansion blades can be easily attached and detached. *For more details, please refer to the PDF materials or feel free to contact us.

• Other powder equipment

The elliptical motion reduces sample clogging through horizontal reciprocating motion and tapping motion by the upper hammer, thereby enhancing the sieving efficiency. It is widely used due to its durability and stable reproducibility. ■ High sieving capability ■ Compact with a small footprint ■ Prevents oil leakage to the outside ■ Low noise due to the use of worm gears ■ Equipped with a timer ◎ For more details, please contact us or download the catalog.

• Sieve/Shaker
• Other physicochemical equipment
• Analytical Equipment and Devices

The "TI-500 Series" is a high-performance product that allows for the rapid grinding of samples (such as rubber and resin) that have been difficult to grind until now, by freezing them first. Liquid nitrogen is continuously injected into the cold box, freezing the samples in the grinding container set inside the box at a low temperature of -180°C (minimum achievable temperature), allowing for quick micronization of the samples. Therefore, this device is designed to minimize the consumption of liquid nitrogen. 【Features】 ■ Easy maintenance of the frozen state of the grinding samples ■ Freezing the samples improves grinding efficiency and reduces time ■ Can be used for heat-sensitive samples, allowing for versatile applications ■ Dry ice or cooling water can be used ■ Three models available by type *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

This is a sieve shaker that generates vertical vibrations on the vibrator using an electromagnet and leads to a vibrating base. To improve the efficiency of sieving, it has enhanced features such as infinitely variable frequency and intermittent motion. Additionally, this vibration method allows for the use of standard sieve sizes of 200 mm and 150 mm, which are widely used, thereby increasing the efficiency of the sieving operation. 【Features of the device】 ■ Frequency control is possible ■ Intermittent motion time can be set freely ■ Continuous or timer operation is possible ■ Compact size and easy to operate ■ Functionality can be enhanced by adding attachments (optional) to the main unit 【Examples of samples to be processed】 Coffee, nuts, plastics, herbs, chemicals, soil, flour, construction materials, sand, seeds, grains, powdered detergent, fertilizers, iron powder, minerals ◎ For more details, please contact us or download the catalog.

• Other physicochemical equipment

■□■Features■□■ ■The structure is simple, making operation easy and eliminating causes of failure. ■The oil transfer pump uses a trochoidal pump, which is highly efficient and consumes less power compared to conventional pumps. ■The switching valve allows for changes in hose connections without needing to reverse the flow of oil, enabling the suction side hose to be switched with the discharge side hose. ■Using sufficiently dried filter paper can dehydrate moisture in the oil to below 20 ppm. 【Applications】Electrical insulating oil, turbine oil, hydraulic fluid, flushing oil, refrigerant oil, internal combustion engine oil ■□■For more details, please request materials or refer to the catalog■□■

• Filtration Equipment
• Analytical Equipment and Devices

This is an easy-to-use filtration machine primarily used for the filtration and refining of insulating oil and turbine oil, aimed at completely and easily removing small amounts of moisture and fine sludge. ■ Due to its simple structure, it is easy to operate and has fewer causes of failure. ■ The oil transfer pump uses a trochoid pump, which is efficient and consumes less power compared to conventional pumps. ■ The switching valve allows for changes in hose connections without needing to reverse the flow of oil, enabling the suction side hose to be switched to the discharge side hose. ■ By using sufficiently dried filter paper, it is possible to dehydrate the moisture in the oil to below 20 ppm. ◎ For more details, please contact us or download the catalog.

• Filtration Equipment

Filter presses are widely used in various fields for precise filtration and solid-liquid separation, as well as for clarification and sterilization, due to their simple mechanism and ease of operation, despite the existence of various filtration systems. Since the filtrate enters each frame simultaneously and parallel filtration is conducted, it is possible to achieve a large filtration area relative to the size of the machine. Additionally, by utilizing the pump pressure, it is possible to efficiently filter small quantities of a variety of raw liquids.

• Filtration Equipment

The "Laboratory Jack" is a product that excels in durability and makes it easy to lift and lower heavy objects. It has gained high trust for its long-standing performance and quality improvement across various fields, from basic research to cutting-edge research areas. The upper and lower plates are made of stainless steel, and both types are available in full stainless steel. The ratchet type is operated with a ratchet handle, while the others use a knob mechanism. 【Features】 ■ Easy lifting and lowering of heavy objects ■ Two types: upper and lower plates in stainless steel, and full stainless steel ■ Standard sizes range from 80mm to 400mm ■ Two types of lifting mechanisms: knob type and ratchet type ■ Custom sizes of over 500mm are also available *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

By rotating the unbalanced weight attached to the rotation axis, the vibrating body is made to oscillate up and down, resulting in stable vibrations. The samples in the grinding container set on the left and right are efficiently micronized by the impact force of the balls (or rods). ■ High grinding capacity ■ Shortened grinding time due to the use of rods ■ Easy input and output of grinding samples ■ Accurate grinding time ■ Reduced operating noise ◎ For more details, please contact us or download the catalog.

• Crusher
• Other physicochemical equipment
• Analytical Equipment and Devices

It is widely used in sample procurement such as mixing and crushing in mining, ceramics, and metals. The balls placed inside the container create impacts and grinding effects when they fall due to rotation, which homogenizes the samples and crushes them efficiently. ■ Roller adjustment according to the container ■ Rotation speed adapted to crushing conditions ■ Easy to move with casters

• Other processing machines
• Crusher
• Analytical Equipment and Devices

The vibration isolation effect of this device on the installation surface absorbs vibrations to the extent that it is almost unchanged from when the crusher is stopped, thus providing excellent effectiveness in maintaining the accuracy of measuring instruments. ■ High rigidity with aluminum honeycomb core ■ Uses dedicated air springs ■ Easy adjustment of horizontal level ■ No other air source required thanks to the air pump ■ Easy to move with casters ◎ For more details, please contact us or download the catalog.

• Other processing machines
• Crusher
• Other laboratory equipment and containers

Electrolyte solutions can be measured as they are, but for non-electrolyte solutes, by sampling an appropriate amount of the sample and analyzing it with a spectrometer, refractometer, chromatograph, etc., the membrane permeability coefficient can be determined. ■ To perform accurate and precise measurements, it is also possible to set a wide range of conditions under the same conditions. ■ The membrane can be easily attached and detached, preventing damage, twisting, or liquid leakage during membrane setup. ■ The rotational accuracy is high, and the reproducibility of conditions within the cell is also very high. ■ Excellent operability with digital display. ■ Since the internal conditions of each dialysis cell can be measured and displayed simultaneously, it is possible to monitor the concentration decrease and increase on both sides of the membrane at the same time, allowing for mass balance and efficiency improvements. ◎ For more details, please contact us or download the catalog.

• Other physicochemical equipment
• Analytical Equipment and Devices

The folded cell with the measuring film set can stabilize rotation with high-precision starlight, allowing for extremely high reproducibility of the conditions within the cell.

• Stirrer
• Analytical Equipment and Devices

The system consists of electrodes and a measurement unit. By inserting electrodes into a dialysis cell set with a measurement membrane, the concentration change of the permeate solution is measured by conductivity, and the permeability is calculated from that change, allowing for the evaluation of the membrane's performance. For conductivity measurement, we offer the ST type, which measures only on the low concentration side, and the DX type, which can individually measure both the high and low concentration sides.

• Other physicochemical equipment
• Analytical Equipment and Devices

The rotation from the motor is transmitted to the disk, causing the holder on the disk to rotate in the opposite direction. This method allows for the composite centripetal acceleration to increase in proportion to the square of the optimal rotational speed by having the directions of rotation be opposite to each other due to the absolute centripetal acceleration from the revolution. We have developed this system not only for enhanced functionality and ease of use but also to efficiently and safely handle the grinding and mixing of samples. ■ Ultra-fine grinding that cannot be achieved with dry grinding ■ Rotational speed can be adjusted with a single touch ■ Grinding time can be set accurately using a digital display ■ A variety of materials for the mill pot ■ Easy attachment and detachment of the mill pot ■ Safety features incorporated ■ Achieves low noise and low vibration ◎ For more details, please contact us or download the catalog.

• Other processing machines
• Crusher
• Analytical Equipment and Devices

This is a filtration machine that can be used for various applications in the filtration process of manufacturing, including oil refining, wastewater, process water, and solutions. By arranging the filtration sections on both sides, it allows for the continuous completion of the filtration process without stopping the feed. ■ Continuous filtration is possible even during filter media replacement (single-side filtration) ■ Easy filter media replacement ■ Uniform cake adhesion is achieved ■ Increased processing capacity ■ Reduced filter media wear ■ A single filtration section structure is also possible (FP-100S) ◎ For more details, please contact us or download the catalog.

• Other processing machines
• Filtration Equipment
• Analytical Equipment and Devices