ピーライフ・ジャパン・インク List of Products and Services

Our research team, in collaboration with Keio University, Ito En, Inc., SI Resin Industry Co., Ltd., and the Keio University Advanced Molecular Research Center, has successfully obtained a degradation bacterium for polypropylene (PP) that incorporates the biodegradable additive "P-Life." This research achievement represents an important step towards the microbial degradation treatment of non-degradable polyolefin-based plastics. Furthermore, the degradation bacteria attracted by the addition of P-Life are expected to effectively decompose and remove microplastics generated from polyolefin-based plastics, helping to alleviate their accumulation in the global environment. 【Features】 - Multiple degradation bacteria discovered that are compatible with P-Life added plastics - Capable of degrading a wide range of materials, including polypropylene and polyethylene - Safety of the products generated after plastic degradation being metabolized by microorganisms - Effectiveness of P-Life in promoting microbial degradation has been demonstrated *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals

We would like to introduce a case where our biodegradable plastic additive 'P-Life' has been adopted for seedling protection shelters. It protects planted seedlings from damage caused by deer, rabbits, and other animals. The materials, consisting of biodegradable tubes and domestically sourced wooden supports, are environmentally friendly, allowing for labor-saving removal operations. Additionally, the basic additive amount for this product is 1.5% or more (masterbatch), enabling the production of biodegradable resin products at a low cost. 【Case Overview】 ■ Introducing Company: Sumitomo Forestry Co., Ltd. Resource and Environment Business Division, Forest Department ■ Application: Seedling Protection Shelter *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

We would like to introduce a case where our biodegradable plastic additive 'P-Life' has been adopted for designated bags specifically for kitchen waste. The bags containing kitchen waste are processed at a composting center. The garbage bags decompose due to our product, and the kitchen waste turns into compost, which is then sold to nearby farmers. Additionally, the components of our product are registered in the national positive list based on the revised Food Sanitation Act (updated April 2022). [Case Overview] ■ Location: Organic Recycling Center in Mogi Town, Tochigi Prefecture ■ Application: Designated bags for kitchen waste *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

We would like to introduce the shelf life of our microbial degradation plastic additive, "P-Life." Knowing the product's lifespan is a very important matter when dealing with microbial degradation plastics in general. The shelf life of the product is defined as the period until the degradation begins. 【Method for Measuring Shelf Life】 1. Conduct a heat acceleration test at 80°C in a gear oven for each product sample. 2. Confirm the point at which degradation begins from the changes in the sample's properties. 3. Convert that time into the duration for storage at room temperature to predict the shelf life. *For more details, please refer to the PDF document or feel free to contact us.

• plastic

We would like to introduce the decomposition mechanism of our microbial biodegradable plastic additive, "P-Life." It has a mechanism that repeatedly undergoes oxidation and reduction reactions, allowing for the continuous induction and promotion of oxidative decomposition by incorporating radicals into the carbon chains of the polymer. The formed oxides (for example, carboxylic acids) are digested and absorbed by microorganisms in soil or compost environments. Ultimately, they are transformed into CO2 (carbon dioxide) and H2O (water) through metabolic activities such as respiration. 【Features】 ■ Possesses a mechanism that repeatedly undergoes oxidation and reduction reactions ■ Capable of continuously inducing and promoting oxidative decomposition ■ The polymer is depolymerized and forms oxides (functional groups) *For more details, please refer to the PDF document or feel free to contact us.

• plastic

We would like to introduce the physical property information of our "P-Life" PP 10 masterbatch. It is composed of 10% active ingredient from P-Life and 90% polypropylene, with a recommended processing temperature of 165°C to 300°C. It is applicable for general processing of polypropylene, including extrusion, inflation, and injection molding. 【Features】 ■ Composition: 10% active ingredient from P-Life + 90% polypropylene ■ Appearance: Pellet form ■ MI: 30 (as base resin) ■ Color: Beige ■ Odor: None *For more details, please refer to the PDF document or feel free to contact us.

• plastic

We would like to introduce the physical property information of the "P-Life GREEN 20" masterbatch that we handle. The biodegradable resin consists of polyethylene and polypropylene, with a melting point of 110°C. It is applicable to all processing methods of polyethylene and polypropylene, including inflation, extrusion, injection molding, foaming, and lamination. 【Features】 ■ Composition: 20% active ingredient of P-Life + 80% polyethylene ■ Appearance: Pellet form ■ MI: 8.1 (as base resin) ■ Color: Beige ■ Odor: None *For more details, please refer to the PDF document or feel free to contact us.

• plastic

We would like to introduce the features of our microbial biodegradable plastic additive, "P-Life." This additive is made from raw materials derived from plant oils (biomass). By adjusting the amount of P-Life added, it is possible to control the degradation period. The addition amount starts from 1.5%, allowing for the production of microbial biodegradable plastic products at a low cost. 【Features】 ■ Enables the production of microbial biodegradable plastic products at a low cost (economic efficiency) ■ Allows control over the degradation period (quality control) ■ Complies with Food Sanitation Act Notification No. 370, as well as the US FDA and European RoHS directives (safety) ■ Does not alter the properties of the plastic (retention of physical properties) ■ Can be used without changing processing conditions (processability) *For more details, please refer to the PDF materials or feel free to contact us.

• plastic

We would like to introduce the public certification of our microbial degradation plastic additive, 'P-Life'. Numerous verifications of the microbial degradation of non-degradable plastics have been conducted, and due to its proven microbial degradability, it has obtained national certifications and environmental marks (Green Label) in various countries around the world. Please feel free to contact us if you have any inquiries. 【National Certifications and Environmental Marks (Green Label)】 ■ Kingdom of Sweden ■ UAE (United Arab Emirates) ■ Hong Kong ■ Kingdom of Saudi Arabia ■ Federative Republic of Brazil *For more details, please refer to the related links or feel free to contact us.

• plastic

We would like to introduce the field test (outdoor exposure) of our microbial degradation plastic additive, "P-Life." We conducted a degradation test in an outdoor environment using seedling bags (made of polyethylene) with the P-Life additive. Degradation was confirmed in approximately three months under the climate of Southeast Asia. Please feel free to contact us if you have any inquiries. [Test Details] ■ Conducted a degradation test in an outdoor environment using seedling bags (made of polyethylene) with the P-Life additive. *For more details, please refer to the related links or feel free to contact us.

• plastic

We would like to introduce the results of various elution tests and material tests for our biodegradable plastic additive "P-Life." The tests conducted include "FDA-compliant elution tests" and "Food Sanitation Act-compliant material tests and elution tests." All test items, including the n-hexane elution test of the "FDA-compliant elution tests" and the material tests of the "Food Sanitation Act-compliant material tests and elution tests," have received a "pass" evaluation. 【Test Overview (Excerpt)】 < FDA-compliant Elution Test > ■ Sample: P-Life added HDPE film ■ Test Method: FDA 21 CFR 177.1520 (Regulations concerning containers and packaging that come into contact with food) ■ Testing Organization: Hong Kong Productivity Council *For more details, please refer to the related links or feel free to contact us.

• plastic

We would like to introduce examples of cases where agricultural mulch film has been adopted. After being spread using a mulcher, it gradually begins to break down when exposed to sunlight, and after harvesting, it can be easily incorporated into the soil. The decomposition rate is set to ensure it breaks down within the appropriate period. After incorporation, it is decomposed by microorganisms in the soil into water and carbon dioxide, eliminating the need for removal and reducing labor. 【Case Overview】 ■Location: Pumpkin field in Chitose City, Hokkaido ■Usage: Agricultural mulch film *For more details, please refer to the related links or feel free to contact us.

• plastic

We would like to introduce a case study of our product "P-Life." In Japan, the majority of applications for biodegradable plastics are utilized as packaging and wrapping materials. Our product is also widely used for packaging and wrapping purposes. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■Location: Japan ■Application: Packaging and wrapping materials *For more details, please refer to the related links or feel free to contact us.

• plastic

This document provides an explanation of P-Life biodegradable plastic additives and their market development. It includes information on P-Life biodegradable plastic technology, product lineup, functions, and microbial decomposition mechanisms. Since 2003, sales of P-Life have started primarily in the Asia-Pacific region, and currently, the sales area has expanded to all regions of the world. 【Contents】 ■ Company Overview ■ P-Life Biodegradable Plastic Technology ■ P-Life Product Lineup ■ Functions and Microbial Decomposition Mechanisms of P-Life (Additives) ■ Results of Microbial Decomposition Tests in Soil Environment Part 1 *For more details, please refer to the PDF document or feel free to contact us.

• plastic

"P-Life" is a highly safe microbial degradation plastic additive developed based on years of testing and verification in various countries around the world. The basic addition amount is 1.5% or more (masterbatch), enabling the production of microbial degradation resin products at a low cost. The components are registered in the national positive list based on the revised Food Sanitation Act (updated April 2022). It also complies with the Ministry of Health, Labour and Welfare Notification No. 370 of the Food Sanitation Act. 【Features】 ■ An additive based on fatty acids refined from plant oils (biomass) ■ Microbial degradation resins include polyethylene (PE) and polypropylene (PP) ■ The physical properties of the added resin products are equivalent to those of standard resin products ■ The microbial degradability of the added plastic products has been verified according to JIS K6955 (ISO 17556) *For more details, please refer to the PDF materials or feel free to contact us.

• plastic