日通電子工業 List of Products and Services

Nittsu Electronics Industry's "Cable Stripper" accommodates a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types based on two models: the Hybrid Series and the High Power Series. 【Features】 ■ Leaves no marks on the strip ■ Touch sensors improve work efficiency ■ Turbo cylinder excels at stripping hard coatings and extra-thick cables *For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper" from Nichitsu Electric Industry accommodates a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types based on two models: the Hybrid Series and the High Power Series. 【Features】 ■ Leaves no marks on the strip ■ Touch sensors improve work efficiency ■ Turbo cylinder excels in stripping hard coatings and extra-thick cables *For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The tabletop small-type wire twisting machine is a wire twister that accommodates a wide range of core wire sizes from AWG 10 to 46. It allows for easy one-touch twisting of one or multiple wires. In addition to speed adjustment, the chuck strength adjustment dial enables twisting tailored to the target. There is no need to change fixtures even when the core wire size changes. It demonstrates its power in the termination processing of multi-core cables. 【Features】 ■ Easy one-touch twisting of one or multiple wires! ■ Twisting tailored to the target is possible with each adjustment dial! ■ No need for fixture changes even when the core wire size changes! ■ Accommodates core wire sizes from thick wires around AWG 10 to ultra-fine wires of AWG 46! ■ It may also be capable of processing wires harder than AWG 10 or IV wires! ■ The rotation direction switch allows for switching between CW/CCW! ■ The wire insertion port is made of transparent acrylic, improving workability! *For more details, please contact us or download the catalog to view.

• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is compatible with a wide range of wire sizes, from thin to thick, using electric control, air drive, and high torque. We offer six types of two models based on the Hybrid Series and High Power Series. The "CC300V5" has a full strip length of 3 to 300 mm and a maximum strip length of 500 mm. With a newly developed chuck method, it leaves no chuck marks, making it ideal for eco-friendly wire stripping. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is designed to handle a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types of two models based on the Hybrid Series and High Power Series. The "CC200V5" has a full strip length of 3 to 200 mm and a maximum strip length of 500 mm. The newly developed chuck method leaves no marks on eco-friendly wire stripping. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

Nittsu Electronic Industry's "Cable Stripper" is capable of handling a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types based on two models from the Hybrid Series and the High Power Series. 【Features】 ■ Leaves no marks on the strip ■ Touch sensor improves work efficiency ■ Turbo cylinder excels in stripping hard coatings and extra-thick cables *For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Hybrid Series" is air-driven and high-torque, accommodating a wide range of wire sizes from thin to thick. We offer four models that can be selected based on strip length, with the "ST300V5" having a full strip length of 3 to 300mm and a maximum strip length of 500mm. It also meets various needs by allowing the option of a touch sensor specification. In response to user requests, we have changed the position of the handle to the top. It can be opened and closed with one hand, making cleaning and maintenance easier. Additionally, it can be used overseas with a power supply of AC100-240V. *For more details, please refer to the catalog download or request materials.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is designed to handle a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types based on two models: the Hybrid Series and the High Power Series. The "CC120V3" has a full strip length of 3 to 120 mm and a maximum strip length of 300 mm. Its newly developed chuck method leaves no marks on eco-friendly wire strips. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Hybrid Series" is air-driven and high-torque, accommodating a wide range of wire sizes from thin to thick. We offer four models that can be selected based on strip length, with the "ST120V3" providing a full strip length of 3 to 120mm and a maximum strip length of 300mm. It also meets diverse needs with options for a touch sensor specification. In response to user requests, we have changed the position of the handle to the top. It can now be opened and closed with one hand, making cleaning and maintenance easier. Additionally, it can be used internationally with a power supply of AC100-240V. *For more details, please refer to the catalog download or request materials.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is suitable for a wide range of wire sizes, from thin to thick, with electric control, air drive, and high torque. We offer six types of two models based on the Hybrid Series and High Power Series. The "CC70V2" has a full strip length of 3 to 70 mm and a maximum strip length of 200 mm. The newly developed chuck method leaves no marks on eco-friendly wire stripping. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Hybrid Series" is air-driven and high-torque, accommodating a wide range of wire sizes from thin to thick. We offer four models that can be selected based on strip length, and the "ST70V2" has a full strip length of 3 to 70mm, with a maximum strip length of 200mm. It is compatible with an optional stop-type stopper, making it ideal for short strips. In response to user requests, we have changed the position of the handle to the top. It can be opened and closed with one hand, making cleaning and maintenance easier. Additionally, it can be used internationally with a power supply of AC100-240V. *For more details, please refer to the catalog download or request materials. *Customers wishing for an on-site demonstration, please contact us and mention "Request for On-site Demo."

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Hybrid Series" is air-driven and high-torque, accommodating a wide range from thin to thick wires. Four models are available, selectable by strip length. The "ST120V3" has a full strip length of 3 to 120mm and a maximum strip length of 300mm. It meets diverse needs, including an option for a touch sensor specification. In response to user requests, the handle position has been changed to the top. It can be opened and closed with one hand, making cleaning and maintenance easier. Additionally, it can be used internationally with a power supply of AC100-240V. 【Features】 ■ High torque accommodates a wide range from thin to thick wires! ■ Cam-type chucking device securely holds without damaging the insulation! ■ Meets diverse needs, including the option to select a touch sensor specification. *Currently conducting free strip tests exclusively for inquiries from Ipros! *For more details, please contact us or download the catalog to view.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Hybrid Series" is air-driven and high-torque, accommodating a wide range of wire sizes from thin to thick. We offer four models that can be selected based on strip length, with the "ST120V3" providing a full strip length of 3 to 200 mm and a maximum strip of 500 mm. It also meets diverse needs with options for a touch sensor specification. In response to user requests, we have changed the position of the handle to the top. It can be opened and closed with one hand, making cleaning and maintenance easier. Additionally, it can be used internationally with a power supply of AC 100-240V. *For more details, please refer to the catalog download or request materials.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is designed for a wide range of applications, from thin to thick wires, with electric control, air drive, and high torque. We offer six types based on two models: the Hybrid Series and the High Power Series. The "CC120V3 TURBO-1" accommodates full strip lengths of 3 to 100 mm, maximum strip length of 300 mm, and thick cables up to 150 sq. The newly developed chuck method leaves no marks on eco-friendly wire stripping. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper CC Chuck Series" is compatible with a wide range of wire sizes, from thin to thick, using electric control and air drive with high torque. We offer six types based on two models: the Hybrid Series and the High Power Series. The "CC100GV3 TURBO-2" can handle full strip lengths of 3 to 100 mm, with a maximum strip length of 300 mm, and is suitable for ultra-thick cables up to 325 sq. It features a newly developed chuck mechanism that leaves no marks, making it ideal for eco-friendly wire stripping. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper High Power Series ST120GV3" provides stable operation with air drive and electric control. The "TURBO-1" is equipped with twin cylinders and can handle ultra-thick cables up to 150 sq. The guide pipe ensures that the cable is securely inserted into the center of the blade, allowing for reliable stripping work. It also accommodates various needs, such as the option to select a touch sensor specification. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper High Power Series ST100GV3" provides stable operation with air drive and electric control. The "TURBO-2," equipped with a large twin cylinder, can handle thick cables up to 325 sq. The guide pipe ensures that the cable is securely inserted into the center of the blade, allowing for reliable stripping work. It also accommodates various needs, such as the option to choose a touch sensor specification. For more details, please contact us or download the catalog.

• Other processing machines
• cable
• Other cutting tools

The "Cable Stripper Simple Series" is air-driven and high-torque, accommodating a wide range of wire sizes from thin to thick. Two models are available, selectable by strip length. The "FC120V3" has a full strip length of 3 to 120 mm, with a maximum strip length of 300 mm. The guide pipe ensures that the cable is securely inserted into the center of the blade, allowing for reliable stripping work. Stripping of deformed cables is possible with the use of the cable guard. The full cover with interlock mechanism allows for safer operation. For more details, please contact us or download the catalog.

• Other processing machines

The "Loose Mac LO-3" is an easy-to-use shield loosening machine that simply adjusts the brush spacing according to the cable's outer diameter. Speed control is possible to match the form and characteristics of the shield. Dust generated from shield wires such as thread-wound and paper-wound types is also sucked in by a fan and stored in a dust box. By replacing the brush (SUS), it is also possible to strip the enamel part of enamel wires. 【Features】 ■ Complicated shield loosening tasks can be done with a single touch. ■ Simply adjust the brush spacing according to the cable's outer diameter for easy shield loosening. ■ Dust from interleaved materials like thread-wound and paper-wound types is also sucked in by a fan and stored in a dust box. *For more details, please contact us or download the catalog.

• cable
• Other lighting equipment
• Other cutting tools

The cable cutting machine "CUT・MAC CU-01" demonstrates its power in cutting thick cables with its dual-cylinder air system. It cuts cables at high speed using the force of air. The two-handed operation method ensures safety. 【Features】 ○ No adjustment or replacement needed even if the thickness of the cable changes ○ Can be used anywhere as long as there is compressor air ○ Compact body for easy mobility For more details, please contact us or download the catalog.

• Plastic processing machines (cutting and rolling)
• Pipe and cable cutters

The "Cable Stripper Simple Series" is air-driven and high-torque, accommodating a wide range from thin to thick wires. Two models are available, selectable by strip length. The "FC120V3" has a full strip length of 3 to 120mm, with a maximum strip length of 300mm. A guide pipe ensures that the cable is securely inserted into the center of the blade, allowing for reliable stripping work. Stripping of deformed cables is possible with the use of a cable guard. The full cover with an interlock mechanism allows for safer operation. For more details, please contact us or download the catalog.

• Other processing machines

Cables with a tendency to curl will be reliably guided to the center of the blade when passed through the guide pipe.

• Other processing machines

The Stomach Option Guide Pipe [also compatible with coiled cables] is an introduction to the Stomach series option parts from Nittsu Electronic Industries. With a wide range of options, we meet diverse needs. The "Guide Pipe" ensures that cables with coiling issues are accurately guided to the center of the blade when passed through the guide pipe. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

One set includes two sizes (one set with integer and 0.5 larger dimensions). Due to the collision blade structure, there will be no strip defects once the correct selection is made.

• Other processing machines

It demonstrates power on the strip of deformed cables that do not have a circular cross-section.

• Other processing machines

The TURBO 2 dedicated option [thick blade with different diameters] is a specialized option for the "TURBO-2," which is equipped with a large twin-cylinder and can handle ultra-thick cables up to 325 sq. The "thick blade" features blades with different diameters on both sides. The "fixed plate for guide pipe" is a plate used for the common guide pipe of the series. The "U-shaped guide" is a guide for thick cables that cannot use the guide pipe. The "guide block" is used for centering adjustment of the blade when using the U-shaped guide. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The option cam-type chuck, which includes three types of chucks based on cable material, is an optional part of the Stomach series. We offer three types of chucks: coarse, fine, and flat, depending on the cable material. With a wide range of options, we meet diverse needs. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Option Cable Guard Dual Round [Deformed Cable Stripping Work] is an optional part of the Stomach series. It is effective for stripping work on deformed cables that do not have a circular cross-section. There are 24 types available, ranging from 1-1.5mm to 24.0-24.5mm. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The option blade double-edged [no stripping defects with accurate selection] is an optional part of the Stomach series. One set includes two sizes (one set with whole numbers and dimensions 0.5 larger), and due to its collision blade structure, there are no stripping defects once an accurate selection is made. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

There are various types of cables, and we often receive requests on how to select blades and guide pipes. Therefore, we will conduct a strip test and return the results to you. *Customers who wish to request a free strip test should contact us and include "Request for Free Strip Test" in their message.

• Other cable related products
• cable

You can understand the key points of wire insulation removal! We are currently offering a comprehensive catalog of cable strippers for free. We have a lineup categorized by application and function, and we strip a variety of cables with abundant options. 【Features】 ■ Standard machine with air drive and electric control → Cable guard is standardized → Can also accommodate eco-friendly types ■ Powerful machine that supports up to 325 sq with twin cylinders → Capable of handling thick cables ■ High cost-performance machine that does not require power → Wide compatibility for thin to thick cables with high torque *For more details, please contact us or download the catalog to view.

• Other cable related products
• Pipe and cable cutters
• Other processing machines

The feeder ZKF-25 is a work supply machine capable of extracting workpieces with a maximum height of 45 mm and a width of 100 mm. In addition to extraction by the material detection arm, it can be combined with the ZSE25 to feed materials without applying load. The roller height can be adjusted according to the shape of the material, preventing deformation. For more details, please download the catalog.

• Parts feeder

The ZKF-5 feeder is a versatile large material feeding machine that can be fed from either the left or right side. It is equipped with a jog function that is very convenient when setting up materials, and the feeding speed can be adjusted according to the shape of the material and the cutting speed of the digital cutter. For more details, please download the catalog.

• Parts feeder

The Reel Stand ZKR-20 is a power-free, simple type of feeding device for cutting machines, ideal for feeding workpieces wound on bobbins, reels, paper tubes, etc. It allows for free rotation with the up and down movement of the arm and prevents excessive feeding through braking action. We also offer dedicated flanges (sold separately) that match the inner diameter of the material. For more details, please download the catalog.

• Parts feeder
• Other machine elements

The Sensor Stand ZSE-25/ZSE-25H is a dedicated sensor stand for the digital cutter ZKC series. It detects materials using a light sensor and controls the Z feed, allowing for smooth material feeding to prevent sudden loads on the materials. For more details, please download the catalog.

• Parts feeder
• Other machine elements

The wire stripper ZKS-12 is a single-wire insulation stripping machine capable of stripping the insulation from wires ranging from AWG 14 to 30. With its clever mechanism, it performs clamping, blade cutting, and blade movement using a single motor, making it an electric wire stripper. For more details, please download the catalog.

• Other machine elements

The SCAT Cut & Stripper ZKS-100 is a wire processing machine that can cut and strip wires simultaneously, offering high performance at a low price. The adoption of a new sliding mechanism for the material guide pipe reduces stripping errors, and the inclusion of an LCD display makes settings very easy. For more details, please download the catalog.

• Other machine elements

The tube heater ITH-15S is a heat shrink tube heater that can reliably shrink in just a few seconds with a single touch, compared to traditional manual drying methods. It is equipped with two 500W near-infrared heaters, allowing you to freely adjust the temperature (heating time) according to the object being heated. For more details, please download the catalog.

• Other machine elements
• tube

The Digital Cutter ZKC-25 [Soft Material Cutting Shear Blade Type] is a standard type of cutting machine that enables a wide variety of workpiece cutting. It uses a special steel with excellent durability and is equipped with shear blades capable of cutting relatively soft metals such as aluminum and copper, as well as materials containing glass fibers. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-25T [Thin Blade Type for Straight Cutting Edges] is a standard cutting machine that consolidates all customer needs. It features a sharp cutting edge with a thin blade, making it ideal for situations where a straight cutting edge is required, especially for tubes. It allows for easy operation with a liquid crystal touch panel. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-25C [Shear Blade External Control Type] is a standard cutting machine equipped with external input and output terminals that enable the cutting of a wide variety of workpieces. The shear blade type uses special steel that is highly durable. It can cut relatively soft metals such as aluminum and copper, as well as materials containing fiberglass. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-25CT [Thin Blade External Control Type] is a standard cutting machine that consolidates all customer needs. It features a sharp cutting edge with an external input/output terminal, making it particularly suitable for achieving straight cutting surfaces, especially for tubes. It allows for easy operation via a liquid crystal touch panel. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-16 [Compact Body Shear Blade Type] is a standard type with the lightest weight (9kg) and a compact body. It uses a special steel that excels in durability and features a shear blade capable of cutting relatively soft metals such as aluminum and copper, as well as materials containing fiberglass. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-16T [Compact Body Thin Blade Type] is a standard type with the lightest weight (9kg) and a compact body. It features a thin blade known for its sharp cutting ability. It is particularly suitable for cutting wires, tubes, and vinyl ties when a straight cutting surface is required, making it an economical cutting machine. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters

The Digital Cutter ZKC-25V shear blade [for cutting uneven surfaces with belt feed] is a belt feed type that is optimal for cutting materials that could not achieve precision with roller types, materials with uneven surfaces, and slippery materials. It uses a shear blade made of special steel with excellent durability. It is capable of cutting relatively soft metals such as aluminum and copper, as well as materials containing fiberglass. For more details, please download the catalog.

• Processing Jig
• Other machine elements
• Pipe and cable cutters