アイテクソリューション List of Products and Services

The product is a compatible item for the discontinued Olympus OMCL-AC240TM. Therefore, it can be used just like the conventional Olympus AFM probes. <Features of SPM-AC240S-AP> 1. Platinum-coated probe for precise electrical property evaluation This cantilever is ideal for electrical property evaluations such as EFM, KFM, and SCM. The probe side is coated with platinum, providing stable conductivity. 2. Sharpness and conductivity combined The design with low resistance achieves high conductivity. Additionally, by finishing the probe tip to a sharp point, it enables high-resolution observation of the fine structures on the sample surface and highly sensitive measurements of electrical properties.

• Other microscopes

This product is equivalent to the discontinued Olympus OMCL-AC55TS (gold-coated on the back). Therefore, it can be used in the same way as conventional Olympus AFM probes. <Features of SPM-AC55S-GS> 1. High-speed measurement with high resonance frequency in the megahertz range The high resonance frequency improves scan speed, significantly reducing image acquisition time. 2. High-resolution measurement achieved with low thermal noise cantilever The cantilever, which has a high resonance frequency and a high spring constant of 85 N/m (Nominal), enables high-resolution measurements while suppressing thermal noise. This is particularly expected to be applied in measurements at liquid-solid interfaces. Gold-coated products in other ranges are also available for sale.

• Other microscopes

This product is equivalent to the OMCL-AC240TS from Olympus, which has been discontinued. Therefore, it can be used in the same way as conventional Olympus AFM probes. <Features of SPM-AC240S-AS> 1. Suitable for measuring viscoelasticity and soft samples It has mechanical properties with a small spring constant for dynamic mode (tapping mode), allowing for reduced load between the sample and the probe. This makes it suitable for measuring the shape and viscoelasticity of soft samples. 2. Stable tip structure A stable and sharp probe due to sharpening treatment and experience in manufacturing conventional probes. The adoption of a tetrahedral shape allows for easy confirmation of the positional relationship between the sample and the probe when measuring with an SPM device combined with an optical microscope, facilitating accurate positioning adjustments.

• Other microscopes

This product is equivalent to the OMCL-AC200TS from Olympus, which has been discontinued. Therefore, it can be used in the same way as conventional Olympus AFM probes. <Features of SPM-AC200S-AS> 1. Compatible with a wide range of samples This product, with its mid-range cantilever mechanical properties, is suitable for measuring a wide variety of samples, from soft materials to hard materials, including silicon semiconductors, glass, metals, and plastics. It is also suitable for use as a screening tool when measuring samples for which optimal cantilever mechanical properties are not yet determined. 2. Stable tip structure A stable and sharp probe achieved through sharpening treatment and experience in manufacturing conventional probes. The adoption of a tetrahedral shape allows for easy confirmation of the positional relationship between the sample and the probe when measuring with an SPM device combined with an optical microscope, facilitating accurate positioning adjustments.

• Other microscopes

This product is equivalent to the OMCL-AC160TS from Olympus, which has been discontinued. Therefore, it can be used in the same way as conventional Olympus AFM probes. <Features of SPM-AC160S-AS> 1. High-resolution measurement Combines a high Q value, a resonance frequency of 300 kHz (Typ.), and a spring constant of 26 N/m (Typ.) for softness. This minimizes damage to the sample and enables high-resolution measurement of surface roughness and high-sensitivity phase measurement. 2. Stable tip structure A stable sharp probe achieved through sharpening treatment and experience in manufacturing conventional probes. The adoption of a tetrahedral shape allows for easy confirmation of the positional relationship between the sample and the probe when measuring with an SPM device combined with an optical microscope, facilitating accurate positioning adjustments.

• Other microscopes

If you have any concerns regarding safety fences, please feel free to request a quote. As an aluminum profile manufacturer, we offer low prices and short delivery times, providing a comprehensive service for the design, production, and installation of aluminum safety fences.

• Other industrial robots
• Other environmental equipment
• aluminum

Modular design that can accommodate the needs for control and data management of extensive process equipment. Hybrid controller equipped with advanced loop control and logic operation functions. 【Features】 ○ System construction possible in a short time ○ Easy network connection with various HMI/SCADA ○ User-friendly Windows-based engineering tools ○ Excellent PID loop control capabilities and more robust analog processing functions than PLCs ○ Single and redundant (dual) controllers ○ PID control algorithm with auto-tuning function ○ Up to 1,920 input/output points (including remote I/O) ○ Logic operation processing functions ○ Robust standard control algorithms with over 100 types ○ Floating-point numerical calculations ○ Powerful alarm and event processing functions ○ Up to 960 points of isolated analog input ○ Remote I/O rack ○ Hot-swappable I/O card functionality ● For other features and details, please download the catalog.

• Other FA equipment

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options like connectors. This allows our customers to reduce design costs during packaging and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. Our calibration function and temperature compensation ensure high precision and stable output across a wide temperature range. We use ASIC compensation technology to provide characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. High precision and stable output across a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Built-in amplifier. 6. Compatible with micro pressure, low pressure, and medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

Honeywell Pressure Sensor Trustability HSC Series High Precision ±1% Total Error Band Built-in amplifier with compensated analog output, enhanced output with ASIC Long-term stability Pressure range from 1 psi to 150 psi (60 mbar to 10 bar) Power supply 3.6 Vdc to 5.25 Vdc (maximum 6 Vdc) Compensation temperature 0° to 50° Operating temperature -20° to 85° Output 0.03% FSS Supports DIP, SIP, and SMT mounting options Compact package with various types of packages and ports available Liquid/liquid differential pressure and flow-through type port connection (20PC) Compliant with RoHS and WEEE directives

• Pressure Control
• Pneumatic Equipment
• Sensors

Honeywell Pressure Sensor Trustability HSC Series High Precision ±1% Total Error Band Built-in Amplifier with Digital Output Enhanced by ASIC Long-term Stability Pressure Range from 1 psi to 150 psi (60 mbar to 10 bar) Power Supply 3.6 Vdc, 5.25 Vdc (maximum 6 Vdc) Compensation Temperature 0° to 50° Operating Temperature -20° to 85° Output 12 bits Supports DIP, SIP, and SMT mounting options Compact Package with Various Types of Packages and Port Options Available Liquid/Liquid Differential Pressure and Flow-through Type Port Connection (20PC) Compliant with RoHS Directive and WEEE Directive

• Pressure Control
• Pneumatic Equipment
• Sensors

Honeywell Micro Pressure Sensor Trustability HSC Series High Accuracy ±1% Total Error Band Built-in amplifier with analog output, enhanced output with ASIC Long-term stability ±2.5mbar to 40mbar (±1 inH2O to ±30 inH2O) Power supply 3.33Vdc, 5.05Vdc (maximum 6Vdc) Compensation temperature 0° to 50° Operating temperature -20° to 85° Output 0.03% FSS Supports DIP, SIP, and SMT mounting options Compact package with various types of packages and port selections Liquid/liquid differential pressure and flow-through type port connection (20PC) Compliant with RoHS and WEEE directives

• Pressure Control
• Pneumatic Equipment
• Sensors

Honeywell Micro Pressure Sensor Trustability HSC Series High Precision ±1% Total Error Band Built-in Amplifier with Digital Output, Enhanced Output with ASIC Long-term Stability Pressure Range from ±2.5mbar to 40mbar (±1 inH2O to ±30 inH2O) Power Supply 3.3Vdc・5.0Vdc (Maximum 6Vdc) Compensation Temperature 0° to 50° Operating Temperature -20° to 85° Output 12 bits Supports DIP, SIP, and SMT Mounting Options Compact Package with Various Types of Packages and Port Options Available Liquid/Liquid Differential Pressure and Flow-through Type Port Connection (20PC) Compliant with RoHS Directive and WEEE Directive

• Sensors
• Pneumatic Equipment
• Pressure Control

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short lead times, and small production runs, as well as customization of characteristics and options like connectors. This allows us to reduce design costs during your packaging process and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output across a wide temperature range. We use ASIC compensation technology to provide characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. High precision and stable output across a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from device integration to board mounting. 5. Compact package of 10mm x 10mm. 6. Compatible with low and medium pressure. 7. Dual polarity. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options such as connectors. This allows us to reduce design costs during packaging for our customers and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieves high precision and stable output over a wide temperature range through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to board mounting. 5. Built-in amplifier. 6. Supports micro pressure, low pressure, and medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

Smate's flow sensors are designed and inspected in-house, allowing for a consistent system that can flexibly respond to customer requests such as low prices, short delivery times, and product customization. - MEMS compact low flow sensor with high sensitivity in low flow range - High performance and reliability at low cost - High linearity and temperature compensation - Ultra-low noise reliability: [detection of temperature gradient changes using dual thermocouples] - Strong against pressure shocks and clogging

• Pressure Control
• Pneumatic Equipment
• Sensors

This is the lineup of pressure, flow, and wind speed sensors from Sensormate, located in Lukang, Taiwan. Sensormate's board-mounted sensors can provide customized products for pressure, flow, and wind speed sensors according to customer requirements, in addition to the standard lineup. *It is also possible to adjust specifications based on the lineup. Since we handle everything from design to inspection in our own factory, we can offer low prices, short lead times, and small production runs, as well as customization of specifications and manufacturing of options like connectors. This allows customers to reduce design costs during packaging and avoid the hassle of sourcing other components. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

The small clamp-on ultrasonic flow meter Caloriena R2 is a flow meter that can measure flow with high precision and temperature. It can measure fluid temperature non-contact from the outside of the pipe (error ±1℃). 【Features】 1. Easy installation It can be mounted on the pipe using a dedicated bracket with a single butterfly screw, or secured with the included Velcro strap. The sensor position can be adjusted simply by aligning it with the notch according to the guide. Zero calibration and adjustments are fully automated. Battery operation is possible. 2. Ultra-high resolution It can measure very small flow rates (flow velocities) that were previously unmeasurable. (Flow velocity resolution 0.001 m/sec at >200A, accuracy 0.6% RD at >0.5 m/sec) 3. Automatic pipe diameter detection function This is a convenient feature for customers who do not know the pipe specifications, making it useful for old pipes where the internal scale is unknown. 4. Minimum class sensor dimensions 5. Direct connection to a computer It can be directly connected to a computer via RS485 (MODBUS) or CF card. 6. Multiple sensor connections possible It allows for averaging measurements from two or three side lines of the same piping (improving measurement accuracy) and independent measurements from multiple channels with different pipe diameters. This can also lead to reduced installation costs.

• Flow Control
• Water Hydraulic Equipment
• Sensors

NINJA is a direct insertion type ultrasonic flow meter designed to be installed on repair valves (ball valves). 【Features】 1. No installation costs The biggest feature is that it can be easily installed on existing ball valves without any need for water stoppage or construction. 2. Ease of adjustment and calibration All adjustments and calibrations of the installed NINJA are automated. Complicated adjustment and calibration tasks can be resolved with the push of a button by the user. 3. High precision with the latest ultrasonic technology The latest technology has dramatically improved the accuracy of transit time measurement. With a flow velocity resolution of 0.003 m/sec, it can accurately measure even small flow rates. 4. Settings The setting of parameters necessary for measurement is easily done interactively through the LCD screen on the display unit. 5. Temperature measurement function NINJA also has a water temperature measurement function. It allows for constant temperature monitoring with an accuracy of ±1°C. 6. Comprehensive output Pulses: Forward flow pulse, reverse flow pulse, error output Analog: Flow (4-20mA), fluid temperature (DC 0-5A) Data storage: SD card (csv format) Computer communication: Can be directly connected to MODBUS monitoring systems.

• Flow Control
• Water Hydraulic Equipment
• Sensors

The "P Series for Office Tables" is a tabletop partition developed as a measure against infectious diseases. Since it uses PET clear material, it does not create a sense of confinement when enclosed. Additionally, it is flexible, so it will not break due to falls or impacts. Designed for easy assembly and installation, allowing customers to respond quickly. Please utilize it as a divider for desks in offices and meeting rooms. 【Features】 ■ Suitable for infection control measures ■ Easy to assemble ■ Customizable partitions to fit your office ■ Uniform pricing even for large sizes with free shipping ■ Sturdy yet non-confining clear design ■ Made of aluminum and PET, eliminating concerns about fire hazards *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

**Features** 1. No installation cost When attaching to an existing ball valve, there is no need for water stoppage or construction, making installation easy. 2. Ease of adjustment and calibration The adjustment and calibration of the installed ULSONA DT are fully automated. Complicated adjustment and calibration tasks can be resolved with the push of a button by the user. 3. High precision with the latest ultrasonic technology The measurement accuracy of transit time has dramatically improved due to the latest technology. With a flow velocity resolution of 0.003 m/sec, it can accurately measure even small flow rates. 4. Settings The setting of parameters necessary for measurement is easily done interactively through the LCD screen of the instruction unit. 5. Temperature measurement function The ULSONA DT also has a water temperature measurement function. It allows for constant temperature monitoring with an accuracy of ±1°C. 6. Comprehensive output Pulses: Forward flow pulse, reverse flow pulse, error output Analog: Flow (4-20mA), fluid temperature (DC 0-5A) Data storage: SD card (csv format) Computer communication: Can be directly connected to MODBUS monitoring systems 7. Backup function In the case of DT2 or DT3, measurement can continue with the remaining sensors even if there is an anomaly with one sensor.

• Flow Control
• Flow Meter
• Sensors

**Features** 1. No installation cost required When attaching to an existing ball valve, there is no need for water stoppage or construction, making installation easy. 2. Ease of adjustment and calibration The adjustment and calibration of the installed ULSONA ST are fully automated. Complicated adjustment and calibration tasks can be resolved with the push of a button by the user. 3. High precision with the latest ultrasonic technology The accuracy of transit time measurement has dramatically improved with the latest technology. It has an industry-leading flow velocity resolution of 0.001 m/sec, allowing for accurate measurement of very small flow rates. 4. Settings The setting of parameters necessary for measurement can be easily configured interactively through the LCD screen of the display unit. 5. Temperature measurement function The ULSONA ST also has a water temperature measurement function. It allows for constant temperature monitoring with an accuracy of ±1°C. 6. Comprehensive output Pulses: Forward flow pulse, reverse flow pulse, error output Analog: Flow (4-20mA), fluid temperature (DC 0-5A) Data storage: SD card (csv format) Computer communication: Can be directly connected to MODBUS monitoring systems.

• Flow Meter
• Flow Control
• Sensors

Asia Pacific Microsystems, Inc. (APM) is located in Hsinchu, Taiwan, a hub for the high-tech industry. Leveraging over 18 years of experience and achievements in the IC manufacturing field, we specialize in MEMS technology foundry, focusing on sensor dies (chips). 【Features】 1. Automotive parts grade quality under TS16949 system 2. Support for the development, manufacturing, and testing of pressure sensors 3. Over 150 million units shipped to the automotive manufacturing parts industry 4. Quick time-to-market for products

• Sensors
• Other semiconductors
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options like connectors. This allows us to reduce design costs during your packaging process and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output across a wide temperature range. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. High precision and stable output across a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to board mounting. 5. Built-in amplifier. 6. Compatible with low and medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short lead times, and small production runs, as well as customization of characteristics and options like connectors. This helps reduce design costs during your packaging process and eliminates the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieves high precision and stable output over a wide temperature range through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Built-in amplifier. 6. Supports medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options such as connectors. This allows us to reduce design costs during your packaging and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. High precision and stable output over a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to board mounting. 5. Built-in amplifier. 6. Compatible with medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small-scale production, as well as customization of characteristics and options like connectors. This allows our customers to reduce design costs during packaging and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieves high precision and stable output over a wide temperature range through calibration functions and temperature compensation. 3. Uses ASIC compensation technology for characteristic compensation for each sensor. 4. Wide range of applications from equipment integration to board mounting. 5. Built-in amplifier. 6. Supports medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options like connectors. This allows us to reduce design costs during packaging for our customers and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. High precision and stable output over a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Built-in amplifier. 6. Compatible with medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options such as connectors. This helps reduce design costs during packaging and eliminates the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we improve the linearity of the measured pressure. The calibration function and temperature compensation enable high precision and stable output across a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Adoption of MEMS and stress concentration structures to improve the linearity of measured pressure. 2. High precision and stable output across a wide temperature range achieved through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Built-in amplifier. 6. Compatible with micro pressure, low pressure, and medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short lead times, and small production runs, as well as customization of characteristics and options like connectors. This allows our customers to reduce design costs during packaging and eliminate the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output across a wide temperature range. We use ASIC compensation technology to provide characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieves high precision and stable output across a wide temperature range through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Built-in amplifier. 6. Compatible with medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short lead times, and small production runs, as well as customization of characteristics and options such as connectors. This helps reduce design costs during customer packaging and eliminates the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieves high precision and stable output over a wide temperature range through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to board mounting. 5. Built-in amplifier. 6. Supports medium pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

This is a pressure sensor from Sensormate, located in Lukang, Taiwan. Since we handle everything from design to inspection in our own factory, we can offer low prices, short delivery times, and small production runs, as well as customization of characteristics and options like connectors. This allows our customers to reduce design costs during packaging and eliminates the hassle of sourcing other components. By adopting MEMS and stress concentration structures, we have improved the linearity of the measured pressure. With calibration functions and temperature compensation, we achieve high precision and stable output over a wide temperature range. We use ASIC compensation technology for characteristic compensation for each sensor. <Features> 1. Improved measurement pressure linearity by adopting MEMS and stress concentration structures. 2. Achieved high precision and stable output over a wide temperature range through calibration functions and temperature compensation. 3. Characteristic compensation for each sensor using ASIC compensation technology. 4. Wide range of applications from equipment integration to PCB mounting. 5. Compatible with low pressure. Please feel free to contact us with your requirements.

• Pressure Control
• Pneumatic Equipment
• Sensors

In the ITEC Solutions Division, we have been providing Honeywell Sensing & Control (S&C) limit switches to a wide variety of customers nationwide for many years. Please feel free to contact us for quotes or any inquiries you may have.

• switch
• Other FA equipment

The "PK Series" is a tabletop partition developed as a measure against droplet infection. It is designed for easy assembly and installation, allowing customers to respond quickly, and can be used at office reception counters and in front of cash registers. Additionally, since it is made to order, you can specify widths from 400 to 1060 mm and a gap at the bottom of 100 to 300 mm in 10 mm increments, enabling the construction of partition spaces that make the most of the available area without changing the layout. 【Features】 ■ Suitable for droplet infection measures ■ Easy to assemble ■ Customized partitions for your office ■ Uniform pricing even for large sizes and free shipping ■ Sturdy yet non-claustrophobic clear design ■ Made of aluminum and PET, eliminating concerns about fire hazards *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products
• Other office supplies

The "PK Series" is a tabletop partition developed as a measure against droplet infection. It is designed for easy assembly and installation, allowing customers to respond quickly, and can be used at office reception counters and in front of cash registers. Additionally, since it is made to order, you can specify widths from 400 to 1060 mm and a gap at the bottom of 100 to 300 mm in 10 mm increments, enabling the construction of partition spaces that make the most of the available area without changing the layout. 【Features】 ■ Suitable for droplet infection measures ■ Easy to assemble ■ Partitions tailored to your office ■ Uniform pricing even for large sizes and free shipping ■ Sturdy yet not claustrophobic clear design ■ Made of aluminum and PET, eliminating concerns about fire hazards *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The "P Series for Office Tables" is a tabletop partition developed as a measure against infectious diseases. Since it uses PET material, it does not create a feeling of confinement when enclosed. Additionally, it is flexible, so it will not break due to falls or impacts. Designed for easy assembly and installation, allowing customers to respond quickly. Please utilize it as a divider for office and conference room desks. 【Features】 ■ Suitable for infection control measures ■ Easy to assemble ■ Customizable partitions to fit your office ■ Uniform pricing even for large sizes and free shipping ■ Sturdy yet non-confining clear design ■ Made of aluminum and PET, eliminating concerns about fire hazards *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products