永野電機産業 List of Products and Services

The "500 Series" is a trace moisture meter designed based on the principle of electrolyzing moisture absorbed by phosphorus pentoxide (P2O5) to generate a current corresponding to the amount of moisture. It is equipped with a microprocessor and a high-quality electrolytic trace moisture sensor, satisfying user requirements. Additionally, it displays precise measurement values and provides accurate and reliable readings over a wide range from 0.01 ppm to 1,000 ppm. 【Features】 ■ Auto range from 0.01 to 1000 ppm ■ RS232/485 output ■ Display units: ppm, °C, °F ■ Remote sensor selectable ■ Malfunction alarm *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "NDW Series" is a humidified gas generation device born from experience in dew point measurement technology. Setting the dew point is easily operable by adjusting the water temperature in the tank. With a bubbling/shower method, it can generate stable dew point gas regardless of gas flow and environmental temperature. Additionally, by mixing with dry gas, it can produce a wide range of dew points from negative to positive. 【Features】 ■ Easy dew point setting ■ Compact and space-saving ■ A type available that only uses bubbling ■ Custom system design and manufacturing according to needs ■ High-precision humidified gas generation *For more details, please download the PDF or feel free to contact us.

• Gas Generator

The "ND-OX" is a low-cost, high-quality embedded zirconia oxygen meter suitable for simple checks of oxygen concentration. We have prepared several types of products for each measurement range, from the ppm order to 95%. 【Features】 ■ Built-in sampling pump ■ Pump-less type also available ■ External output possible ■ Does not disturb the measurement atmosphere ■ Resistant to pressure influences *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "ND-CH" is a type of dew point detector that uses a Peltier element for cooling, without the use of dry ice or alcohol. It is easy to identify condensation with a 10x magnification scope. Additionally, you can select a cooling speed suitable for the measured dew point, resulting in minimal supercooling. 【Features】 ■ Cooling method using electronic cooling elements ■ Three selectable cooling speeds ■ Identification of condensation state using a scope ■ Temperature measurement using a PT 100Ω temperature resistance sensor ■ Hold display of measurement values *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "ND-SD" is a portable dew point meter that can operate continuously for a full 20 hours and reduces the stabilization time for dry gas dew points. It incorporates our original compact dry chamber into a lightweight and compact portable case. Additionally, switching is easily possible with just one valve operation. The dry chamber shortens the time required for stabilizing low dew point measurements. 【Features】 ■ Equipped with a compact dry chamber ■ Lightweight & compact ■ Sufficient operating time ■ One-touch gas IN/OUT connection ■ High precision & wide range measurement *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "EC92D/IS" is a portable oxygen meter that can measure oxygen in the atmosphere and industrial gases from trace levels (ppm) to percentages (%), covering a wide range. Calibration can be easily performed using ambient air or standard gas, and regular maintenance is not required. Thanks to its innovative cell seal system, measurements at ppm levels can be obtained within minutes. Additionally, no special skills are needed for use, as it is designed to be easily operated by anyone. 【Features】 ■ Usable in hazardous areas (ATEX approved) ■ Maintenance-free ■ Range selection (ppm, %) ■ Simple calibration ■ Power supply: 2×PP3 batteries *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment

The EC900 is a trace oxygen analyzer designed for a wide range of applications, from general oxygen analysis to specialized uses, making it suitable for various environments. It is available in three mounting variations: panel mount, wall mount, and 19” rack. There are three types of cells available to accommodate different applications, all of which can be used with the same main unit. 【Features】 ■ Easy maintenance ■ Compatible with flammable gases ■ Convenient cell life indicator function ■ Long-lasting galvanic cell *For more details, please download the PDF or feel free to contact us.

• Analytical Equipment and Devices

The "FI-8000-SF6" is an SF6 purity meter manufactured by RIKEN Keiki, suitable for measuring under pressurized conditions and for recycling SF6 gas (purity verification). It can measure with a gas consumption of approximately 62.5 ml (sample pressure: 0.7 MPa), which is a small amount. Additionally, there is no need to adjust pressure or flow, making it easy to measure. 【Features】 ■ Can measure with a small amount of gas ■ Simple and easy operation ■ Equipped with data logging function ■ Compact and portable design ■ More convenient when used in conjunction with the portable dew point meter ND-SD model *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other environmental analysis equipment

The "600 Series" is a transmitter for trace oxygen concentration analysis that works in various situations, such as alarm operations and control outputs, when combined with a monitor. It features a two-wire loop power system, a variety of gas connection diameters, and built-in pressure adjustment functionality, allowing for direct connection to gas sample lines. Additionally, adjustments and range changes in the field can be made quickly and easily using a 3-button keypad. 【Features】 ■ Easy connection ■ Pressure adjustment functionality ■ Excellent cost performance ■ Long-life cell ■ Programmable selectable measurement range, etc. *For more details, please download the PDF or feel free to contact us.

• Analytical Equipment and Devices

Next-generation sensors using alumina thin films are equipped with dew point transmitters, providing continuous online measurement of moisture concentration in gas within the dew point range of -100 to +20°C. 【Features】 ○ Measurement results are transmitted via a 4-20mA current output. ○ The only necessary routine maintenance is the periodic recalibration of the ND-TA dew point transmitter. ○ Rapid response time. ○ Chip replacement is possible. ○ Flexible usage. ● For more details, please download the catalog or contact us.

• Other electronic parts