カメダデンキ List of Products and Services

■ Strong against vibrations, increased conductivity! The COS sleeve is resistant to environmental vibrations and increases conductivity, which helps reduce heat generation. It is compatible with ultra-small sizes for sequencers and inverters, as well as Japanese IV, KIV, CV, and MLF cables! ■ Uses seamless copper tubing - The sleeve material is oxygen-free copper and features seamless copper tubing, making it a highly safe product that minimizes issues such as malfunction when connecting to precision equipment. - It is said that sleeves from European manufacturers do not match Japanese gauges, leading to problems such as burrs and poor conductivity when used with Japanese wires. - The connection is made with stranded wire, ensuring high safety and resistance to the influence of other cables.

• Other work tools

As long as there is a duct rail, you can freely arrange LED straight tubes with rail sockets.

• LED lighting

The "Amorphous Heater" is a heater that frees you from the heavy labor of winter tasks such as snow shoveling and roof snow removal. The melted snow turns into water, eliminating the worry of where to dispose of the snow. This product is made from an amorphous alloy developed in Japan, combining Japanese manufacturing technology with Israeli heating technology. 【Features】 ■ Safe and environmentally friendly low-temperature heat source ■ The heater surface area per watt is more than five times that of conventional (cable-type) heaters ■ Can be bent at right angles ■ Can be flexibly shaped to fit the installation location ■ Can be installed on roofs and parapets according to the architectural design, etc. *For more details, please download the PDF or feel free to contact us.

• Wood products

The "KTL-101SE/KTL-201SE" is a simple, lightweight, and low-cost product that features trough-type fixtures for 10-inch and 20-inch sizes, identical to traditional design drawings. With a wide beam angle of 300° and bright linear LEDs, it emits very little ultraviolet light, making it unattractive to insects. It is a voltage-free specification of AC100-240V, allowing for installation without selecting a power source, and it produces minimal noise, having no impact on surrounding electronic devices. 【Features】 ■ RoHS compliant ■ Fixture and linear tube set model number ■ Available for individual purchase ■ Indoor use only ■ Optional parts include fixtures with terminal blocks *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting

The "Amomat" is an amorphous heater that has a gentle warmth like a sunny spot. Since the entire floor warms up, there is no coldness at your feet like when using an air conditioner, and the radiant heat from the floor warms the walls and ceiling, heating the entire room. There is no blowing warm air, so it does not stir up house dust, making it suitable for those who are sensitive to air conditioning. It can be installed in various rooms as needed, such as the living room where the family gathers, the dining room, the elderly's room, north-facing rooms, and children's rooms. [Features] ■ Gentle warmth like a sunny spot ■ Reliable 10-year warranty ■ Air conditioning is basically unnecessary ■ Creates a comfortable space ■ Can be installed in just one room *For more details, please refer to the PDF materials or feel free to contact us.

• Other heaters

"Amoribon" is a completely new type of snow melting heater manufactured by AHT, using amorphous alloy ribbon in its heating element. This product, invented in Japan, has been turned into a heater in Israel and is characterized by its outstanding snow melting capability and durability. It has a significantly larger heating surface area compared to conventional electric heating wires, releasing a large amount of radiant heat to powerfully melt snow. Additionally, it does not have moving parts like boilers or hot water pipes for heating, resulting in fewer breakdowns and eliminating the need for regular equipment replacement. 【Features】 ■ Compatible with various snow melting needs ■ Cost-effective running costs ■ Powerful & eco-friendly ■ Exceptional durability for a long lifespan ■ Maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

"Amomat" is a completely new type of floor heating heater manufactured by AHT, using amorphous alloy ribbon in the heating element. Experience the same warmth at a lower temperature setting compared to hot air systems. Since it generates heat from beneath the floor, there is no heat loss. Additionally, as it does not use fire for heating, there is no worry about burns, making it safe for children and the elderly. 【Features】 ■ Radiant heat similar to that of the sun, providing a pleasant warmth like that of spring days ■ No use of fire, keeping the air clean ■ No water circulation, maintenance-free ■ Ability to heat only necessary areas by partitioning the room ■ A low-temperature heat source that is gentle on buildings *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

We would like to introduce the "RAIL SOCKET" available at Kameda Denki Co., Ltd. With just a down rail, you can freely layout LED straight tubes. When combined with spotlights, it enhances the lighting for product displays more effectively. We offer the "RAIL SOCKET S" for one light and the "RAIL SOCKET W" for two lights. Please feel free to contact us when you need assistance. 【Features】 ■ Flexible lighting layout ■ Choose between one or two lights to match your indoor image ■ Colors: two types, white and black ■ By rotating the straight tube to create indirect lighting, it makes living spaces more attractive ■ Size is flexible, compatible with 10 to 40 shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Other lighting equipment

We would like to introduce the "Multi-Angle Channel U-Channel" that we handle. By using cold roll processing, the strength is increased, and it is lightweight due to the holes being punched out. The quality of the material is reflected in the final finish. Additionally, continuous hole punching with high-precision presses ensures accurate hole pitch and a beautiful finish. Bending processing through roll forming achieves equidistant, correct right angles, and straight finishes. 【Features】 ■ Lightweight and strong ■ High quality ■ High precision ■ Endless applications ■ High corrosion resistance ■ Variety of types *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Unikanagu" handled by Kameda Denki Co., Ltd. The "UN-26 series" serves as connectors for U-1 and U-26, the "UN-38 series" is for U-38 and L-40, and the "UN-40 series" is for L-40 connectors, making it very convenient for assembling three-dimensional kanagu. Additionally, we also offer connecting kanagu that can be combined with "Angle L-40W and L-40WP" to assemble brackets and frames. 【Lineup (excerpt)】 ■UN-26L ■UN-26T ■UN-38L ■UN-38T ■UN-40AA *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Bracket" handled by Kameda Denki Co., Ltd. The "LB-WP" type with dual holes (40 type) has holes on both sides of the bracket, allowing for vertical piping support. It can be conveniently used for fixing air conditioning outdoor units to walls, as well as for shelf supports and other applications beyond piping. Additionally, we offer a variety of products including the lighter "LB-M1" and the "SB," which can be used in any direction since both sides are of equal length. 【Features】 <L-shaped Bracket LB Single Hole 40 Type> ■ Continuous holes allow for compatibility with any installation ■ Lightweight and easy to use ■ Low cost and short delivery time due to being a ready-made product ■ Stainless steel options available that are resistant to rust and hygienic ■ Equipped with screw holes for easy fixation to wooden structures *For more details, please refer to the PDF materials or feel free to contact us.

• bracket

We would like to introduce the "Bolt Set and Collar" that we handle. The "Bolt Set" includes the "Dipping Bolt Set" that can be used with L-40W, and a "Low Head Bolt Set" that does not interfere with the head. Additionally, we also offer "Collar C," which is strong and can be used as a spacer during equipment installation. 【Lineup (Excerpt)】 <Collar C> ■C1-6-3C ■C1-20-3C ■C2-8-3C ■C2-9-3C ■C3-14-3C *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• Assembly Jig

We would like to introduce the "Corner Nut N" handled by Kameda Denki Co., Ltd. There is no need for a wrench from the back, making work easier. It is designed to fit multi-angle and U brackets without causing them to rotate together. The NS, NO, and N3 types can be used interchangeably with brackets of different sizes in both vertical and horizontal orientations. 【Lineup (excerpt)】 ■N1-4-3C ■NS-5-3C ■N2-6-3C ■NO-8B ■N3-6-3C *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce the "Quick Nut KCN" that we handle. It can be mounted from the front at any position on the rail and can be used with U channels and C channels just like corner nuts. This is a nut for Multi Channel KC-22S and KC-35. 【Lineup】 ■KCN1-4-3C ■KCN1-5-3C ■KCN2-4-3C ■KCN2-5-3C ■KCN2-6-3C *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce the "Punch Nut PN" that we handle. It is used by pressing it into the concave surface of the U clamp. It does not fall out even when you let go, making it suitable for work in hard-to-reach places. Please feel free to contact us when you need it. 【Lineup】 ■PN-4-3C ■PN-5-3C *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce the "Snap Nut SPN" that we handle. The material consists of spring steel plate and iron corner nut. It is a type of nut that hooks onto the inside of long holes and square holes. Please feel free to contact us when you need it. 【Lineup】 ■SPN-5-3C ■SPN-6-3C ■SPN-8-3C *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce our "Flat Washer W." It can be used when the diameter of screws and bolts is small compared to the hole diameter of multi-angle and U-shaped brackets. It has a larger outer diameter and is more durable than commercially available washers. Please feel free to contact us when you need assistance. 【Lineup】 ■W-16-3C ■W-18-3C ■W-19-3C ■W-23-3C ■W-24-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Sems Bolt B" that we handle. We offer convenient bolts with built-in washers for multi-angle and U-channel applications. This makes work and parts management easier. Please feel free to contact us when you need assistance. 【Lineup (excerpt)】 ■B8-15-3C ■B8-20-3C ■B8-25-3C ■B10-20-3C ■B10-25-3C ■B10-30-3C *For more details, please refer to the PDF document or feel free to contact us.

• bolt

The "Free Rail System" is a method for assembling control panels using DIN rails. Our "Reinforced DIN Rail" not only enhances strength but also allows for the installation of components that are not compatible with DIN rails at the center of the rail using free nuts. Additionally, the "DA-201" has high torsional strength and remains stable even when used in long lengths, making it suitable as a vertical column. A DIN rail can be mounted horizontally on top, making it very convenient. 【Features】 ■ Almost all components in the control panel can be mounted on the rail ■ Easy to accommodate design changes and additional components ■ Stable mounting for heavy components ■ Significantly reduces design time *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig
• Control Panel

The product is a multifunctional reinforced DIN rail with a rotating nut that fits inside. The "DA-201" allows for the insertion of a free nut inside, enabling component installation at the rail center. It can also accommodate corner nuts NS, N2, and N0, allowing for the installation of non-DIN rail compatible components on the same rail. Additionally, the "DA-401" is an ultra-strong type with high torsional strength, allowing for direct installation on the rack panel without a middle plate. 【Lineup】 ■DA-201 ■DA-401 *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

This product is a lightweight and easy-to-handle general-purpose DIN rail with a good finish. It is easy to cut and does not require rust prevention treatment on the cross-section. Components that conform to JIS and DIN standard rails can be installed regardless of the manufacturer. You can freely attach and detach components and terminal blocks at any position on the rail, allowing for flexible responses to design changes and circuit additions. 【Lineup】 ■DA-141 ■DA-142 ■DA-151 ■DA-152 *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

The "S-21" is a base for mounting AC outlets on a DIN 35mm rail. Compatible outlets are Panasonic models WK3001W (1 socket) and WK3004W (2 sockets). After installing the outlet, you can still turn the rail fixing screws (for the 2-socket version, the cover needs to be removed), allowing for easy left-right position adjustments. There is an entry point for cables, so there is no need to cut out notches for the outlet. 【Features】 ■ You can turn the rail fixing screws even after installing the outlet. ■ Easy left-right position adjustments. ■ No need to cut out notches for the outlet. ■ Can be used in combination with ZK Kanagu. *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig

The S-22 is a base for mounting noise filters, capacitors, stabilized power supplies, resistors, sequencers, etc., on a DIN 35mm rail. Equipment can be freely screwed in with a mounting pitch of 25mm to 85mm (S-22-3 is 39mm to 73mm) using the included slide nuts. Mounting to the DIN rail is securely fixed with just one screw. 【Lineup】 ■ S-22-3-3C ■ S-22-4-3C ■ S-22-5-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

The "S-23" is a base for mounting components and equipment on a DIN 35mm rail. Components and equipment are attached to the mini base using screws. The material is steel plate 1.6t with a trivalent chrome finish. Please feel free to contact us when you need assistance. 【Specifications】 ■Material: Steel plate 1.6t with a trivalent chrome finish *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "S-14F" handled by Kameda Denki Co., Ltd. It is convenient for installing volumes and various switches individually within distribution boards, control panels, and operation panels. It can be mounted at any position on a DIN rail. Please feel free to contact us when you need assistance. 【Lineup】 ■S-14F-9-3C ■S-14F-13-3C *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig

The "S-19" is a support bracket for mounting terminal protection covers, such as relays, on DIN rails. By fastening it together with the terminal block mounting bracket, it is easy to attach the protective cover. There are two height options: 20mm and 35mm. Please use commercially available products from each terminal block manufacturer for the mounting brackets. 【Lineup】 ■S-19-20-3C ■S-19-35-3C ■S-19-20K-3C ■S-19-35K-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Free Nut ND" handled by Kameda Denki Co., Ltd. This nut is specifically designed for DIN rail DA-201, making it easy to add or modify components after other devices have been installed. It can be inserted from anywhere on the rail and fixed at any desired location, and its unique shape provides strength not found in conventional plate nuts. 【Lineup】 ■ ND-3-3C ■ ND-4-3C ■ ND-5-3C *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "Free Washer W" is a product designed to prevent the legs of components from falling into the grooves of the DIN rail when attaching parts to the multifunctional reinforced series. It is designed to stay in place simply by being placed on the rail, and lateral movement is easy since the nuts move simultaneously with it, making positioning effortless. Please use it together with the "Free Nut ND" or "Square Nut NS." 【Features】 ■ RoHS compliant ■ Used when attaching parts to the DIN rail multifunctional reinforced series ■ Lateral movement is easy as the nuts move simultaneously, facilitating positioning ■ To be used together with "Free Nut ND" or "Square Nut NS" *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "DAC Series" is a lightweight, compact aluminum cutter specifically designed for DIN rails. The cutting position is visible from above, allowing you to confirm the cut line drawn on the rail, making the work easy and safe. It can cut Kameda DIN rails DA-14 and DA-15 series, as well as aluminum DIN rails of the same shape. Additionally, a scale is available for purchase separately. 【Features】 ■ Utilizes Mokuba brand blades from Miki (Hyogo Prefecture) for exceptional cutting performance ■ Capable of cutting Kameda DIN rails DA-14 and DA-15 series, as well as aluminum DIN rails of the same shape ■ The cutting position is visible from above, allowing you to confirm the cut line drawn on the rail, making the work easy and safe ■ The cutting blade die can also be removed for sharpening *For more details, please refer to the PDF materials or feel free to contact us.

• cutter
• Cutter/Scissors
• others

We would like to introduce our 'Terminal Block Mounting Bracket S' for installing terminal blocks at an angle. The "KS-1T" now includes an M4 type. It has two screw holes, allowing for the connection and installation of two terminal blocks. Additionally, we also offer popular terminal block brackets such as "S-2M" and "S-3." Please feel free to contact us if you have any inquiries. 【Lineup (partial)】 ■KS-1T-4-3C (M4) ■KS-1T-5-3C (M5) ■S-1-4-3C (M4) ■S-1-3C (M5) *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "Terminal Block Mounting Bracket JK" is a product that supports space-saving terminal blocks. The angle is a user-friendly 25°, and there are six height options ranging from 25mm to 100mm. The center of the terminal block rail and the center of the mini bracket mounting screw are aligned on the same line, making design easier. 【Features】 ■ RoHS compliant ■ Space-saving design that allows for easy installation of terminal blocks in narrow spaces due to its compact and lightweight nature ■ The center of the terminal block rail and the center of the mini bracket mounting screw are aligned on the same line ■ Six height options ranging from 25mm to 100mm *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

We would like to introduce our product, "Mounting Bracket S." This product is an auxiliary bracket designed for installation parallel to the mounting surface and is compliant with RoHS. Additionally, a new version with one mounting hole has been added for easier use. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■ S-8-1-3C ■ S-8-2-3C ■ S-9-1-3C ■ S-9-2-3C ■ S-10-1-3C ■ S-10-2-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "ZK/ZKH" is a mounting bracket that is convenient for installing various switches and volume controls individually. The switch mounting holes come in five sizes: 9φ, 13φ, 22φ, 25φ, and 30φ, making it compatible with all switches and volume controls. The 9φ and 13φ holes have small holes for anti-rotation at 0° and 90° positions, allowing for vertical or horizontal installation. 【Features】 ■ RoHS compliant ■ Switch mounting holes available in five sizes: 9φ, 13φ, 22φ, 25φ, and 30φ ■ Each size is available in single and double configurations, allowing for combinations to accommodate installations of three or more units ■ The switch mounting surface is designed to be wide for easy attachment of display nameplates *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

We would like to introduce our switch mounting base 'S-14'. This product is a convenient mounting bracket for installing volume controls and various switches individually within distribution boards, control panels, and operation panels. We offer a space-saving type and an easy-to-install Z-type among our lineup. Please feel free to contact us when you need assistance. 【Lineup】 ■S-14-3C ■S-14Z-3C ■S-14F-9-3C ■S-14F-13-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "Connection Kanag S" is a convenient product for supporting ducts, wiring, small parts, etc. All Kanag models have tapped holes for attaching parts (except for S-5), so there is no need for nuts. S-11 and S-11B are used when connecting U-1 and U-26 at right angles (S-11B has a 9φ hole instead of a tapped hole). Additionally, S-20-25 and S-20-32 are sturdy right-angle connection Kanags, so please use them for securing heavy objects. 【Lineup (partial)】 ■S-4-3C ■S-4-5-3C ■S-5-3C ■S-6-3C ■S-6B-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

We would like to introduce our auxiliary kanagu, the "S-24." This product is a RoHS-compliant item that assists with ducts, wiring, small item installation, and connections. You can choose from three sizes according to your needs. Please feel free to contact us when placing an order. 【Lineup】 ■S-24-3-3C ■S-24-2-3C ■S-24-1-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "S-18" is a bracket for installing wiring ducts behind the control panel door. It secures the duct by sandwiching the pilot lamp and operation switch with the bracket, eliminating the need to stand up stud bolts. We offer three types for 22φ, 25φ, and 30φ. Please feel free to contact us when you need them. 【Product Lineup】 ■S-18-22-3C ■S-18-25-3C ■S-18-30-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "LK/HK" is an auxiliary bracket that can be freely used for supporting wiring ducts and small parts. Due to its continuous groove with holes, it allows for flexible positioning. By adding bending processing, it can also accommodate difficult-to-install locations. Additionally, we offer a nut "NS-5T" that prevents spinning by fitting into the protruding part when installing this product. 【Lineup】 ■LK-6-3C ■LK-8 ■LK-12-3C ■HK-7-3C ■HK-10-3C ■HK-15-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

We would like to introduce our auxiliary kanaguchi, the "Mini Quick KS." This product is convenient for adjusting dimensions and height, and can be used in combination with the channel KC-22S. The KS-14 allows for easy wiring fixation using push mount ties. Please feel free to contact us if you have any inquiries. 【Lineup】 ■KS-11-3C ■KS-12-3C ■KS-14-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

We would like to introduce our product, the "Quick Holder KH." This product is a clamp that allows you to attach ducts and components by inserting it into an angle. It can be fixed with just one screw, eliminating the need for drilling holes. The KH-65 and KH-100 can also directly secure electrical wires with cable ties. 【Product Lineup】 ■KH-1-3C ■KH-4-3C ■KH-65-3C ■KH-100-3C *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "Bar Holder BHS" is an inexpensive, lightweight support designed to hold low-pressure busbars, offering excellent workability. It supports each busbar vertically, allowing for flexible spacing adjustments. It can be secured with a single bolt and accommodates a wide range of copper strip dimensions. Additionally, the BHS-15 is larger than the BHS-10, making it suitable for larger busbars. 【Features】 ■ RoHS compliant ■ Inexpensive, lightweight, and excellent workability ■ Supports each busbar vertically ■ Can be secured with a single bolt *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "KP Cleat (made of FRP)" is a product designed to support low-voltage busbars in a three-phase configuration. It is made of fiberglass-reinforced FRP, which offers excellent electrical properties and mechanical strength, making it lightweight and durable. We will manufacture it to order according to your desired busbar pitch and thickness. 【Features】 ■ RoHS compliant ■ Supports low-voltage busbars in a three-phase configuration ■ Excellent electrical properties and mechanical strength ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "Bar Holder BHX" is a product that supports low-pressure busbars without drilling holes, by clamping from above and below. It can support a wide range of copper strips from 8mm to 20mm in thickness. The groove widths on the A side and B side are different, allowing you to use it according to the thickness of the copper strip. Additionally, it comes with insulated bolts, so please choose the part number according to the width of the copper strip. 【Features】 ■ RoHS compliant ■ No holes drilled in low-pressure busbars ■ Clamps from above and below ■ Different groove widths on the A side and B side *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• others

The "Spacer LS" is an insulating support for low voltage applications (AC 600V or below). Various sizes for height and screw diameter are available. It is very convenient for supporting items that require insulation, such as busbars. Additionally, it is made of polypropylene, which has excellent impact resistance and insulation properties. 【Product Lineup (Partial)】 <Double-sided Nut Type> ■LS-15-M4-V0 ■LS-15-M5-V0 <Bolt and Nut Type> ■LS-15N-414-V0 ■LS-15N-514-V0 *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• nut
• bolt

We would like to introduce our "Spacer Connecting Screws (Hexagon Socket Enamel Screws)." This product is a bolt used for connecting spacers and is compliant with RoHS. Please feel free to contact us when you need assistance. 【Lineup】 ■LSJ-412 ■LSJ-512 ■LSJ-612 ■LSJ-615 ■LSJ-818 ■LSJ-822 *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig
• nut
• bolt