ジェイテック List of Products and Services

The "Industrial Fire Detection System" quickly detects the initial fire source (flame) that causes a fire and alerts through alarms, patrol lights, and emails as part of a safety management system. At the same time as detection, it is also possible to automatically stop related machinery and equipment or to automate initial firefighting in conjunction with sprinklers and local firefighting equipment. The battery life of the sensors is approximately 2 years. The detection sensors can identify up to 8 units. 【Features】 ■ Alerts through alarms, patrol lights, and emails ■ Can stop related machinery and equipment simultaneously with detection ■ Can automate initial firefighting in conjunction with local firefighting equipment ■ Sensor battery life is approximately 2 years ■ Can identify up to 8 detection sensors *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

The "MAC Grinder" is a single-shaft crusher that can process large-sized materials such as plastics and wooden pallets without pre-treatment (primary coarse crushing). It crushes materials from drum can size down to Φ10–50mm in one go. The supplied materials are forcibly pressed against a rotor with numerous rotating blades by a pusher, instantly being gnawed away, and the products that pass through the screen holes are continuously discharged. 【Features】 ■ Extremely low noise due to low-speed rotation ■ Easy maintenance due to simple structure ■ A wide variety of models according to applications and processing capacity ■ Low prices due to standardized lot production ■ No large materials pass through uncrushed *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing
• Crusher

The "ultrasonic vibrating sieve" applies ultrasonic technology to a conventional circular vibrating sieve, enabling dry classification even for mesh sizes below #325, which were previously impossible to classify. Thanks to the oscillation effect of the patented resonance ring system, ultrasonic effects are generated throughout the entire circular metal mesh. Since it does not use tapping balls, which are essential for preventing clogging in conventional vibrating sieves, there is no issue of foreign material contamination. 【Features】 ■ Industrial classification possible down to mesh sizes of 20μm ■ Remarkable classification efficiency and high processing capacity ■ Simple and easy to handle and operate ■ Modification of existing conventional vibrating sieves is possible ■ Detachable converters are also available *For more details, please refer to the PDF document or feel free to contact us.

• Ultrasonic Oscillator

The "SLIPSTICK Conveyor" is a unique conveyor that transports objects through a repeated back-and-forth motion of "slow forward, quick backward." Since it does not have the vertical bouncing and shocks common to typical vibrating conveyors, the transported items glide along the trough surface. It can handle high-temperature materials up to 800°C and heavy items over 100 tons, and its simple structure makes cleaning and maintenance very easy. 【Features】 ■ Can transport fragile products without breaking them due to vertical vibrations ■ Designed to accommodate widths of 3m and lengths of up to 80m with a single drive unit ■ Capable of transporting high-temperature materials up to 800°C and heavy items over 100 tons ■ Simple structure allows for easy cleaning and maintenance ■ Moves quietly, preventing segregation of transported items during conveyance *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

"UniSort" can instantly detect and recognize the materials of various waste plastic containers, allowing for easy sorting (separation) of only the desired material containers. By utilizing the fact that the absorption of wavelengths differs depending on the material when near-infrared (NIR) light is irradiated onto plastics, it can instantly detect the material of the target object. Through the injection from air nozzles installed at the end of the conveyor, only the desired objects are blown upwards and separated (removed). [Features] ■ Instantly detects and recognizes the materials of various waste plastic containers ■ Detects the position of target objects moving at high speed (2 m/s) on the conveyor ■ Separates (removes) only the desired objects by blowing them upwards *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

The key to the recycling of industrial waste is sorting. Separating by specific gravity is a necessary condition for the reuse of resources. The "Air Table" efficiently separates and sorts materials dry by utilizing differences in specific gravity. It is also capable of separating PVC resin from mixed plastic waste. It can be used for a wide range of applications, including the sorting and recovery of copper and aluminum from wire scrap, and the removal of foreign materials such as stones, glass, and metals from agricultural products. 【Product Lineup】 ■ Test Machine - Model V-135 (Fluid deck area: 0.15m²) ■ Production Machines - Model T-10/BX-110 (Fluid deck area: 0.86m²) - Model T-15/BX-260 (Fluid deck area: 1.23m²) - Model T-20 (Fluid deck area: 1.68m²) *For more details, please refer to the PDF document or feel free to contact us.

• Automatic sorting machine

"Ultrasonic metal welding" is a low-temperature welding method that does not affect the material with heat. The welding time is extremely short, at less than 0.1 seconds, and there are no sparks, flames, or smoke generated, making it a very safe and clean welding process. It can be used for wire terminals, electronic components, plastic cases, automotive parts, and more. 【Features】 ■ No thermal impact on materials due to low-temperature welding ■ Very short welding time (less than 0.1 seconds) ■ No filler metal required ■ Helium-tight seals are possible *For more details, please refer to the PDF document or feel free to contact us.

• Welding Machine

The "Rotary Kiln" is a dioxin decomposition treatment device that uses external heat (indirect heating) so that the raw materials do not come into contact with the heated air, preventing contamination of the raw materials and eliminating uneven burning and dust generation. The multi-tube type excels in high-precision uniform firing and maintains the same level of precision and performance during scale-up. It is also capable of carbonizing and activating organic materials. Additionally, it can be used for drying various powders and granules, firing, oxidation reactions, reduction reactions, decomposition, and the generation and regeneration of catalysts. 【Features】 ■ The multi-tube type offers outstanding uniform firing and ensures reliable scale-up. ■ Excellent thermal efficiency, energy-saving, and compact design. ■ Capable of carbonizing and activating organic materials. ■ Heating decomposition and neutralization of dioxins and harmful chlorinated compounds. ■ Available in both multi-tube and single-tube types. *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing

We handle "Vibration Motors / Special Types." Our products feature an all-SUS exterior suitable for the food, chemical, and pharmaceutical industries, and we can supply vibration motors that meet the necessary safety and explosion-proof specifications for vibration equipment exported from Japan to overseas. Additionally, we offer a micro series with small vibration power, which is palm-sized. Please feel free to contact us. 【Features】 ■ Certified to international standards such as IECEX, European standards CENELEC, and US/Canada standards CSA ■ Capable of supplying safety and explosion-proof vibration motors ■ All-SUS exterior for vibration motors ■ Micro series of small motors also available *For more details, please refer to the PDF document or feel free to contact us.

• Generators and transmission motors

This device can instantly detect and recognize the materials of various waste plastic containers, allowing for easy sorting (separation) of only the containers with the desired material. ■Overview of the Principle By irradiating plastics with near-infrared (NIR) light, the device utilizes the fact that the absorption of wavelengths differs depending on the material, enabling instant detection of the material of the target object. Additionally, it detects the position of the target object moving at high speed (2 m/s) on the conveyor and uses an air nozzle located at the end of the conveyor to blow and separate (remove) only the desired object upwards.

• Hazardous material processing