アトニック List of Products and Services

The "MPS Series" is a precision push-pull tester made of aluminum die-cast, featuring a minimum scale value that is half that of the standard type. It has an accuracy of ±0.1% of full scale, and the performance report measures points divided into ten segments of the maximum load, indicating the error at each point. To accommodate various measurements, seven types of attachments are included as standard. Additionally, it comes with a one-year warranty for your peace of mind. [Measurement Usage Examples] - Measuring the operating force of switches - Measuring soldering strength - Measuring the opening and closing force of doors - Measuring the breaking strength of plastic parts, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "MPL Series" is a large push-pull tester that allows for easy measurement of compression (push) and tensile (pull) loads, which can be held in hand. To improve usability, the peak hold can be reset with a single push, allowing for immediate subsequent measurements. Additionally, it comes standard with six types of attachments and a handle for handheld use, making it suitable for various measurements. [Measurement Examples] ■ Measurement of welding strength ■ Measurement of riveting strength, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "MPC Series" is a load checker type push-pull tester that allows for arbitrary load settings and notifies the user of the set values with a buzzer and lamp. It is used in combination with the control unit "C-101." Additionally, it comes standard with seven types of attachments, making it suitable for various measurements. Furthermore, to enhance usability, the reset button for the peak hold feature is conveniently located near the fingertips, allowing for a one-push reset and immediate readiness for the next measurement. 【Measurement Examples】 ■ Measuring the operating force of switches ■ Measuring soldering strength ■ Measuring the opening and closing force of doors ■ Measuring the breaking strength of plastic parts, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "KS-501 Series" is a compact, lightweight, and low-cost tabletop vertical load stand. Due to its lightweight and compact body, it can be easily relocated to different testing locations. Additionally, for measurements on a tabletop, it can be used in a space-saving manner thanks to its compact design. [Measurement Usage Examples] - Measurement of switch actuation force - Measurement of soldering strength - Measurement of door opening and closing force - Measurement of plastic component breakage - Load setting for clamp lever mechanisms, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other factory equipment
• Other factory equipment and parts

The "K-501 Series" is a tabletop vertical load stand that allows for long-duration measurements on a desk. This product addresses the issues of conventional load measurement stands, which are inconvenient for desk work due to the height of the table and cannot withstand long-duration measurements when inspecting while standing. Additionally, it has reinforced moving parts and employs a smoother mechanism with less vibration. [Measurement Use Cases] - Measuring the operating force of switches - Measuring soldering strength - Measuring the opening and closing force of doors - Measuring the breaking strength of plastic parts - Setting loads for clamp lever mechanisms, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other factory equipment
• Other factory equipment and parts

The "DTC Series" is a digital torque checker specifically designed for checking electric screwdrivers that can directly use the bits being employed. Practical minimum digit settings have been implemented for each model and unit, ensuring stabilization near the zero display. Additionally, the torque checker itself is equipped with a handle for easy portability. An aluminum case has also been adopted for the dedicated storage case to protect the main unit from impacts. 【Features】 ■ No need to replace bits ■ Practical and stable data display ■ Focus on ease of use ■ Wide variety of models ■ High-speed data sampling rate *For more details, please refer to the catalog or feel free to contact us.

• Other analytical and testing equipment

The "CHF Series" is a film chuck specifically designed for gripping thin objects. It is recommended for use in tensile applications and is suitable for thin materials such as fabric, tape, film, and paper. We also offer a wide range of measuring instruments and related products, so please feel free to consult us. [Usage Examples] ■Tensile load break testing, etc. *For more details, please refer to the catalog or feel free to contact us.

• jig
• Other Machine Parts
• Other factory equipment and parts

The "ARF Series (Large)" is a high-performance large digital force gauge with an extensive standard output. It features a reversible function that allows the digital display to be inverted through mode settings. Additionally, it has various characteristics, such as a minimum display of 0.1N at 1,000N and 0.001KN at 5KN, among other fine minimum display values. 【Features】 ■ Reversible digital display ■ High-speed data sampling ■ Rich standard equipment for external output types ■ Fine minimum display values ■ Achieves low pricing *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "AP Series" is a lightweight, compact standard push-pull tester that can withstand long measurement periods, thanks to its robust reinforced plastic body. It allows for easy measurement of compression (push) and tensile (pull) loads by hand. To improve usability, the reset button for the indicator needle is conveniently located near the fingertips. Additionally, three types of attachments are included as standard, so you can use them according to various measurement needs. [Measurement Examples] - Measuring the operating force of switches - Measuring soldering strength - Measuring the opening and closing force of doors - Measuring the breakage of plastic parts, etc. *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "ADT-C Series" is a digital torque meter that allows for torque management during screw tightening. With a total of eight models ranging from 0.1 N·m to 20.0 N·m, it is possible to select the appropriate measurement range according to the measured torque. The measured torque values comply with the torque data from the torque analyzer of the torque analysis system, which uses a rotary torque sensor. 【Features】 ■ No need to change bits ■ Wide variety of models ■ High-speed data sampling rate ■ Rich standard features for external output types ■ High reliability of measured torque values *For more details, please refer to the catalog or feel free to contact us.

• Other analytical and testing equipment

It can primarily be used as a torque tester for electric screwdrivers. Of course, it can also be used to check manual torque wrenches. The cross bits currently in use can be utilized with the included attachment. There are a variety of models available, allowing you to select the appropriate measurement range according to the measured torque, ranging from 1 N·cm (0.1 kgf·cm) to 20 N·m (200 kgf·cm) across a total of eight models. The measured torque values comply with the torque data of the torque analyzer (torque analysis system). We have added a digit switching function for three-digit/four-digit displays, which was highly requested by our customers. The following functions are equipped as standard: (digital output (printer output), RS-232C output, comparator output, analog output).

• Other measurement, recording and measuring instruments

This is a load measurement stand that has been streamlined and made low-cost by narrowing down its functions. It is lightweight and compact, making it suitable for any workspace. Due to its light weight, it is easy to relocate to different areas. The compact design also allows for efficient use of workspace.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

This is a simple and low-cost torque checker. With a wide variety of models available, you can choose the appropriate measurement range according to the measured torque, from 1 N·cm (0.1 kgf·cm) to 20 N·m (200 kgf·cm) across a total of eight models. The measured torque values comply with the torque data of the torque analyzer (torque analysis system).

• Other measurement, recording and measuring instruments

■Compression (push) and tensile (pull) load measurements can be easily performed by hand. ■To improve usability, the reset button for the set needle is positioned close to the fingertips, allowing for one-push reset and immediate readiness for the next measurement. ■Seven types of attachments are included as standard.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

This is a lightweight and compact measuring device that can withstand long hours of measurement due to its reinforced plastic body. It allows for easy handheld measurement of compression (push) and tensile (pull) loads. To enhance usability, the reset button for the pointer is conveniently located near the fingertips, allowing for one-push reset and immediate readiness for the next measurement. Three types of attachments are included as standard.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

Achieved ease of use, high functionality, and low price. ■ Compact and unique appearance - Easily measure compression (push) and tension (pull) loads by hand. ■ Digital display is reversible - The digital display can be inverted up and down through mode settings. ■ Rich standard equipment for external output types - Digital output - RS-232C output - Comparator output - Analog output ■ Minimum display value is fine - For example, at 100N, the minimum display value is 0.01N, and at 500N, it is 0.1N.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■ Measurement of compression (push) and tensile (pull) loads can be performed. Please use it mounted on a stand. ■ The digital display is reversible; the digital display can be inverted with mode settings. ■ A variety of external input/output options are standard equipment: - External reset input - Digital output - RS-232C output - Comparator output - Analog output ■ The minimum display digit is fine; for example, the ARF-100 (maximum 1000N) has a minimum display of 0.1N, and the ARF-500 (maximum 5KN) has a minimum display of 0.01KN.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

It can measure compression (push) and tensile (pull) loads from 1 kN to 5 kN. For improved work efficiency, it can be reset with one push, allowing for immediate next measurement. Six types of attachments and a handle for manual holding are included as standard.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

You can easily perform compression (push) and tensile (pull) load measurements by hand. To improve usability, the reset button for the setting needle is conveniently located near your fingertips, allowing for a one-push reset and immediate readiness for the next measurement. You can set any desired load, and it will notify you not only through visual scales but also with a buzzer and lamp. An external output (transistor output) is also included. Seven types of attachments are standardly included.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a lightweight and low-cost product in the small electric type. ■Reinforcements have been made to the moving parts, resulting in a minor change to a smoother mechanism with less vibration. ■By pressing the high-speed button during operation, it is now possible to move at maximum speed, improving work efficiency. ■It is a compression and tension load stand capable of handling loads up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■It is a compact, lightweight, and low-cost product. ■Reinforcements have been made to the moving parts, resulting in a minor change to a smoother mechanism with less vibration. ■The height of the table has been lowered, allowing for long-duration measurements while sitting at a desk. ■It is a load stand for compression and tension up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■ It is a separated type where the display unit and load cell are separate. ■ It can measure both compression (push) and tension (pull) loads. The load cell can be mounted on a dedicated stand or other equipment for measurement. ■ The digital display is reversible. The digital display can be inverted with mode settings. ■ It comes with a rich variety of standard external input and output options. External reset input, digital output, RS-232C output, comparator output, analog output. ■ The minimum display increment is fine. For example, the ARFS-10 (maximum 100N) has a minimum display of 0.01N, while the ARFS-50 (maximum 500N) has a minimum display of 0.1N.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

The sturdy body made of aluminum die-cast supports a maximum measurement range from 3N (equivalent to 300gf) to 500N (equivalent to 50kgf) across a total of 10 models. The scale divisions are fine, with the minimum scale value being half that of the standard type, making it suitable for high-precision measurements.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■ This is a horizontal type load measurement stand. ■ It is a compact, lightweight, and low-cost product. ■ The height of the table has been lowered to enable long-duration measurements while sitting at a desk. ■ It is a load stand for compression and tension up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a horizontal type load measurement stand. ■It is a compact, lightweight, and low-cost product for an electric type. ■By pressing the high-speed button during operation, it allows for movement at maximum speed, improving work efficiency. ■It is a load stand for compression and tension up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a large long-sized product. ■The maximum load is a compression and tensile load stand of 2 kN (200 kgf).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

The maximum load is a compression and tension load stand of 2 kN (200 kgf).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a large long-sized product. ■The maximum load is a compression and tension load stand of 5 kN (500 kgf).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■ The main body is available in aluminum and iron. ■ It can chuck items ranging from thin to thick. ■ Maximum load: 100N, 500N, 2kN ■ Chuck opening width: 0 to 15mm ■ Clamping plate dimensions: 20×20mm, 25×25mm ■ Clamping surface shape: flat, pitch 0.8mm

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is aluminum only for CHF-10N-20. The others are made of iron. ■It has a shape specialized for gripping thin materials such as cloth, tape, film, and paper. ■It is a chuck for tensioning. ■Maximum load: 10N to 500N ■Chuck opening width: 0 to 2mm ■Chuck width: 20mm, 50mm, 70mm ■Tightening surface shape: diamond pattern ■Material: aluminum or iron

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is all iron. ■It has a lever, making it easy to clamp the workpiece. ■It is a chuck for pulling. ■Maximum load: up to 100 kN. ■Chuck opening width: 0 to 5 mm. ■Chuck width: 35 mm.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■Suitable for chucks for thin wires, threads, etc. ■Chuck for tensile use ■Maximum load: 500N ■Chuck opening width: 0-0.5Φ, 0.5-1.0Φ, 1.0-1.5Φ, 1.5-2.0Φ ■Material (claw): Iron ■Material (body): Brass

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is iron. ■It has a shape specialized for gripping thin materials such as cloth, tape, film, and paper. ■It is a chuck for pulling. ■Maximum load: 100N ■Chuck opening width: 0-1mm ■Chuck width: 3mm, 8mm ■Clamping surface shape: flat with a pitch of 0.8mm

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is iron. ■It has a shape specialized for gripping thin round bars, etc. ■It is a chuck for compression and tension. ■Maximum load: 10N ■Chuck opening width: 0.5 to 5Φ ■Clamping surface shape: three-jaw

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is iron. ■It is compatible with wires, threads, and other workpieces. ■It is a chuck for tensile use. ■Maximum load: 500 N ■Maximum wire diameter: 0.5 Φ ■Drum diameter: 10 mm

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is all iron. ■It is suitable for chucking slightly larger workpieces. ■It can be used for both compression and tension. ■Maximum load: 500N, 5kN ■Jaw width: 38mm, 100mm ■Opening: 35mm, 100mm

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■The material of the main body is all iron. ■It is suitable for the workpiece's center support during measurement. ■It is mounted on the pressure plate (sample stage) of the stand. ■It is a fixture for positioning. ■Maximum load: 500 N ■X travel: 60 mm (±30 mm) ■Y travel: 60 mm (±30 mm) ■Feed method: screw feed type

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

It is a super compact and lightweight product. By pressing the high-speed button during operation, it allows for movement at maximum speed, improving work efficiency. It is a load stand for compression and tension up to 500N (50kg). The column bar (for sensors and measuring instruments, etc.) can be freely moved within the stroke range, enabling a wide range of measurements and inspections.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a medium-sized load measurement stand. ■It is a load stand for compression and tension up to 500N (50kg). ■The column bar (mounting part for sensors and measuring instruments, etc.) can be freely moved within the stroke range, allowing for a wide range of measurements and inspections.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a medium-sized load measurement stand. ■It is a load stand for compression and tension up to 500N (50kg). ■The column bar (mounting part for sensors and measuring instruments, etc.) can be freely moved within the stroke range, allowing for a wide range of measurements and inspections. ■By pressing the high-speed button during operation, it is possible to move at maximum speed, improving work efficiency.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a compression and tensile load stand for up to 2KN. ■The column consists of two parts: a movable column and a support column, allowing for stable measurements. ■The column bar can move, enabling smooth work set adjustments. *The push-pull tester shown in the photo is sold separately.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■This is a compression and tensile load stand up to 2KN. ■The column consists of two parts: a movable column and a support column, allowing for stable measurements. ■The column bar can move, enabling smooth work set adjustments. ■New high-speed button added... allows for maximum speed movement during vertical travel.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

■It is a compact, lightweight, and low-cost product. ■The height of the table has been lowered, allowing for long-duration measurements while seated at the desk. ■It is a load stand for compression and tension up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

This is a lightweight and low-cost product in the small electric type. By pressing the high-speed button during operation, it allows for movement at maximum speed, improving work efficiency. It is a load stand for compression and tension up to 500N (50kg).

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

This is a compression and tensile load stand for up to 5 kN (500 kg). *The splash guard and push-pull tester shown in the photo are sold separately.

• Weight related measuring instruments
• Other measurement, recording and measuring instruments