タツタ電線 List of Products and Services

We would like to introduce our "Wire Break Detection Terminal" that we handle. Our lineup includes the "ZT-2," a terminal for on-site installation of sensors, as well as the high flame-retardant type terminal "ZT-B" and the high-sensitivity type terminal "ZT-SR." Additionally, we also offer the on-site installation terminal "ZT-L2" specifically for leak location detection. 【Lineup】 ■ZT-2 ■ZT-B ■ZT-SR ■ZT-L2 *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

We would like to introduce the "Sensor Fixing Devices" that we handle. The "CA-14" is for fixing sensor wiring and comes with adhesive tape. The "SP-1SF" is a bridge-type sticker. Additionally, the pin saddle "PS-1" with concrete nails is manufactured by Sekisui. 【Lineup】 ■CA-14: Sticker (adhesive tape type) ■SP-1SF: Sticker (bridge type) ■PS-1: Pin saddle (with concrete nails) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• others

The "AD-S" is a non-color-changing type leak sensor. It detects even slight leaks of conductive liquids with its line-shaped sensor. It can also detect pure water, acids, and alkaline solutions. The outer diameter is approximately φ3.5mm, and it has a plastic braided outer layer. 【Features】 ■ Non-color-changing type ■ Line-shaped sensor ■ Detects even slight leaks of conductive liquids ■ Can detect pure water, acids, and alkaline solutions *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

"AD-RS" is a color-recovery type water leak sensor. The water-absorbing part turns red, and when it dries, it returns to its original color (white). The sensor is a cable sensor that reliably detects water in any part, and it does not malfunction due to humidity. 【Features】 ■ Color-recovery type ■ Water-absorbing part turns red ■ Returns to original color (white) when dry ■ Does not malfunction due to humidity *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

Introducing the leak detection position sensor "AD-LS." Monitor a wide area with a single sensor. The sensor is a line sensor that reliably detects water at any point and will not malfunction due to humidity. It can also detect pure water, acids, and alkaline solutions. 【Features】 ■ RoHS 10 ■ Dedicated leak detection position sensor ■ The sensor reliably detects water at any point ■ Will not malfunction due to humidity ■ Can detect pure water, acids, and alkaline solutions *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-HS" is a color-changing leak sensor. When it absorbs water, the sensor surface turns red. The red color remains even after drying. It has red color-changing threads embedded in the inner layer, while the outer layer is made of plastic thread weaving. Additionally, it can detect pure water, acids, and alkaline solutions. 【Features】 ■ RoHS 10 ■ Color-changing type ■ The sensor surface turns red when it absorbs water ■ The red color remains even after drying *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-FH-S" is a flat-type leak sensor that is resistant to chemicals. It uses SUS for the electrodes, providing excellent durability. The outer diameter is approximately 6.5mm x 2.0mm, and the outer layer is made of plastic thread braiding. Additionally, the sensor is a line sensor that reliably detects water at any part and will not malfunction due to humidity. 【Features】 ■ RoHS 10 ■ Chemical-resistant flat type ■ Uses SUS for electrodes ■ Excellent durability *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

Introducing the flat-type leak sensor "AD-FH." It monitors a wide area with a single sensor. It is resistant to condensation, excels in humidity resistance and recovery, and can detect pure water, acids, and alkaline solutions. The sensor is a line sensor that reliably detects water at any point and will not malfunction due to humidity. 【Features】 ■ RoHS 10 ■ Flat type ■ Resistant to condensation ■ Excellent humidity resistance and recovery *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-BRS-S" is a high flame-retardant, thin-type leak sensor. It complies with the U.S. fire standard NFPA262 (formerly UL910) and is suitable for space-saving embedded applications. The outer layer is made of flame-retardant (basalt) fiber braid, with a detection sensitivity of less than 3ml. 【Features】 ■ RoHS 10 ■ Complies with NFPA262 (formerly UL910) ■ High flame-retardant thin type ■ Complies with U.S. fire standard NFPA262 (formerly UL910) ■ Suitable for space-saving embedded applications *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

The "AD-BRS" is a cable-type high flame-retardant leak sensor. It complies with the U.S. fire safety standards NFPA262 (formerly UL910) and ASTMD-543. It has excellent flame retardancy and also possesses chemical resistance. The sensor is a line sensor that reliably detects water at any point, and it will not malfunction due to humidity. 【Features】 ■ RoHS 10 ■ Complies with NFPA262 (formerly UL910) ■ Complies with ASTMD-543 ■ Excellent flame retardancy ■ Also has chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-BRL" is a flame-retardant type position detection sensor that complies with the flame retardant standard NFPA262 (formerly UL910). It also complies with ASTM D-543 and has excellent chemical resistance. The outer diameter is approximately φ3.5mm, and the detection sensitivity is 3ml or less for a drop of water at a rate of 1 drop (0.05ml) per second. 【Features】 ■ RoHS 10 ■ Complies with NFPA262 (formerly UL910) ■ Complies with ASTM D-543 ■ Excellent chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-BFS" is a flame-retardant flat-type sensor that complies with the flame-retardant standard NFPA262 (formerly UL910). The outer diameter is approximately 6.5mm x 2.0mm, and it also has excellent chemical resistance. Additionally, it has a detection sensitivity with a sensor wet length of 60 to 90mm (reference water volume: 14 to 18ml). 【Features】 ■ RoHS 10 ■ Complies with NFPA262 (formerly UL910) ■ Complies with ASTM D-543 ■ High flame-retardant chemical-resistant type *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-BFL" is a high flame-retardant, chemical-resistant leak sensor specifically designed for leak location detection. It complies with the US fire safety standards NFPA262 (formerly UL910) and ASTM D-543. It also boasts excellent chemical resistance. It has a sensitivity that detects leaks with a wet width of 100mm or less. 【Features】 ■ RoHS 10 ■ Compliant with NFPA262 (formerly UL910) ■ Compliant with ASTM D-543 ■ Excellent chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AD-AS-5DRM/10DRM" is a wall-mounted detector. It comes standard with detection circuits of 5 or 10. Abnormal alarms are indicated by lamps (LED) for water leakage and disconnection, along with a buzzer, and control output contacts can be accessed collectively as well as individually for each circuit. 【Features】 ■ RoHS 10 ■ Wall-mounted detector ■ Standard detection circuits of 5 or 10 ■ Alarms for water leakage and disconnection are displayed with lamps (LED) and a buzzer sounds ■ Control output contacts can be accessed collectively and individually for each circuit *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

The "AD-AS-1WM" is a detection device designed for panel installation with a single detection circuit. It features a disconnection detection function, with contact outputs for both water leakage and disconnection. Equipped with an LED, it lights up during normal operation and blinks during abnormal conditions. 【Features】 ■ Single detection circuit for panel installation ■ Disconnection detection function included ■ Contact outputs for both water leakage and disconnection ■ Equipped with LED: lights up during normal operation, blinks during abnormal conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

The "AD-AS-1LDMA" is a leak detection device that can digitally display the location of leaks by combining it with a dedicated AD-LS sensor. It is a position detection device for installation within a single circuit panel that digitally displays the leak location. Alarms are indicated on an LCD and with lamps (LED), and a buzzer sounds. Additionally, it can output to higher-level devices via RS-485 communication, and control output contacts and position information (4-20mA) can also be extracted. 【Features】 ■ Digital display of leak location ■ Position detection device for installation within a single circuit panel that displays leak location ■ Alarms indicated on an LCD and with lamps (LED), with a buzzer sounding ■ Capable of outputting to higher-level devices via RS-485 communication ■ Control output contacts and position information (4-20mA) can also be extracted *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

The "AD-AS-1LCM-A" is a leak location detector for a single circuit with AC power type analog output. By combining it with a dedicated sensor, the leak location can be displayed digitally. Alarms are indicated by a 7-segment LED and a lamp (LED), and a buzzer sounds. Additionally, control output contacts and location information (4-20mA) can also be extracted. 【Features】 ■ AC power type analog output ■ Leak location detection for a single circuit ■ Digital display of leak location ■ Alarms indicated by a 7-segment LED and a lamp (LED) with a sounding buzzer ■ Control output contacts and location information (4-20mA) can also be extracted *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

The "AD-AS-1DM" is a compact detector designed for installation in panels with a single detection circuit powered by AC/DC 24V. It uses an AC/DC power supply, and the output contacts for leak detection and disconnection are combined. The power consumption is below 3VA, and the detection sensitivity can be set to four levels. 【Features】 ■ Single detection circuit ■ Designed for installation in panels with AC/DC 24V power supply ■ Utilizes AC/DC power supply ■ Combined output contacts for disconnection *For more details, please refer to the PDF materials or feel free to contact us.

• Other security and surveillance systems
• others

The "AD-AS-1C-SR" is a high-sensitivity detector for DIN rails and equipment integration within panels. It is capable of detecting high-resistance liquids (such as pure water and chemical solutions). The output contacts for leak detection and disconnection are combined, featuring high detection sensitivity. 【Features】 ■ For DIN rails and equipment integration within panels ■ Capable of detecting high-resistance liquids (such as pure water and chemical solutions) ■ Combined output contacts for leak detection and disconnection ■ High detection sensitivity *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

Introducing the wall-mounted standard type leak detection device 'AD-AS-1AM'. This detector has one detection circuit and displays alarms for leaks and disconnections with a lamp (LED). A buzzer will sound. Additionally, control output contacts can also be extracted. 【Features】 ■ Wall-mounted standard type ■ Suitable for comprehensive disaster prevention monitoring systems ■ Monitors a wide area with a single sensor ■ Includes disconnection detection functionality ■ Easy to install, safe, and easy to maintain *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• others

The Tatsuta leak detection system protects facilities such as computer rooms, electrical rooms, important document rooms, and apartments from leaks and flooding incidents. It also includes features that display the location of leaks.

• Other security and surveillance systems

The Tatsuta leak detection system protects facilities such as computer rooms, electrical rooms, important document rooms, and apartments from leaks and flooding incidents. It also includes features that indicate the location of leaks.

• Other security and surveillance systems