和貴研究所 List of Products and Services

BlueWave is a wireless Bluetooth data logger that enables "real-time monitoring" of temperatures in various processes such as sterilization, low-temperature pasteurization, and validation without the need for cables. If your PC is equipped with Bluetooth 5.0 or higher, no special tools are required for activation, and it can send data directly to your PC. The battery is user-replaceable and comes with an Accredia traceable calibration certificate. (Standard calibration points: 25/50/75/100/121/140 °C)

• Data Logger
• Temperature Data Logger
• Other Data Loggers

- 5-sensor support: 5 types including 3-axis acceleration (vibration and shock), temperature, humidity, pressure, and light, either built-in or external (wired connection) - Ultra-compact/lightweight: Minimum size <20x14x62 mm, 18g>, waterproof (IP67) package available - Long-term measurement: Battery 230 & 900mAh, maximum memory 4GB (1 billion) <microSD slot equipped> - Measurement mode: Capable of continuous measurement as well as recording only event occurrences with arbitrary threshold settings (trigger mode) - Recording settings: Measurement rate can be set for each sensor - Multifunctional/multi-purpose: Analog input terminals (voltage and current input), hydraulic sensors, K-type thermocouple connectors, etc.

• Data Logger
• Environmental Test Equipment
• Sensors

- Wireless (BT) & Organic EL Panel - Supports 5 sensors: 3-axis acceleration, temperature, humidity, pressure, and light, either built-in or external (wired connection) - Ultra-compact/lightweight: Minimum <57 x 35 x 17, approximately 27g>, waterproof (IP67) package available - Long-term measurement: Battery 260 or 900mAh The following external wired connection options are now available: - Flex connector (various Plug & Play sensor connections possible) - 4ch or 8ch analog input - K thermocouple connector - Hydraulic sensor Ideal for real-time monitoring.

• Data Logger
• Other physicochemical equipment
• Other electronic measuring instruments

* Built-in two 3-axis acceleration (vibration and shock) sensors with ±15G and ±200G * High-speed sampling and recording at a maximum of 6,400Hz * Capable of recording up to 1,000 events (with 2 million data memory built-in) <threshold recording> * Two models available, one with temperature or temperature/humidity/pressure/light sensors also built-in * 230mAh lithium battery (IP67 waterproof) or 7700mAh Li-SOCI2 replaceable battery (IP65) * LED status display * Affordable

• Data Logger
• Impact Test
• Sensors

- Wireless (BT) & Organic EL panel - Supports 5 sensors: 3-axis acceleration, temperature, humidity, pressure, and light, either built-in or external (wired connection) - Ultra-compact/lightweight: Minimum <57 x 35 x 17, approximately 27g>, waterproof (IP67) package available - Long-term measurement: Battery 260 or 900mAh The following external wired connection options are now available: - Flex connector (various Plug & Play sensor connections possible) - 4ch or 8ch analog input - K thermocouple connector - Hydraulic sensor Ideal for real-time monitoring.

• Data Logger
• Recorders
• Vibration Testing

- Ultra-compact/Lightweight: 39 x 23 x 72 mm, approximately 69 g, waterproof (IP67) package - High-performance 3-axis accelerometer: Fastest 1600Hz, ±15G or ±200G Continuous measurement mode and trigger mode (threshold) available - Long-term measurement: 900mAh lithium or 7700mAh x2 replaceable Li-SOCI2 battery Maximum memory 4GB (1 billion) <microSD slot equipped> - Supports 5 sensors: 5 types including 3-axis acceleration, temperature, humidity, pressure, and light, either built-in or external (wired connection) Strain gauge measurements using analog input terminals are also possible. Various other options are available, so please contact us for more information.

• Data Logger
• Impact Test
• Recorders

It is a GPS ultra-compact transport environment recorder equipped with two 3-axis accelerometers that measure ±15G and ±200G. It records tamper-proof shock and vibration events, as well as geographical location and transport environment (temperature, humidity, pressure, light). With a large-capacity battery and memory, it allows for long-term recording. The transport environment recorder (shock and vibration logger) with GPS/GNSS receiver is a very unique product in the market.

• Data Logger
• Recorders

- Ultra-compact/lightweight: 39 x 23 x 72 mm, approximately 80 g - 4ch analog input: fastest 1,024Hz - Long-term measurement: built-in battery 900mAh, optional Power Pad available maximum memory 4GB (1 billion) <equipped with microSD slot> It is very popular as an industrial data logger for high-speed logging applications with third-party sensors such as CO2 sensors and strain gauges. There are various options available, so please contact us for more information.

• Data Logger
• Recorders
• Other measurement, recording and measuring instruments

It is an 8-channel K thermocouple data logger. The operating temperature of the logger itself is -60°C to 130°C, but with the maximum feature "Heat Protection" (optional), it can withstand temperatures up to +300°C. The battery is user-replaceable and can be directly connected via USB without the need for a connection bay. It is ideal for monitoring baking temperature processes in various applications and for ultra-high temperature measurements in enclosed spaces.

• Sensors
• Thermometer
• Drying Equipment

The ultra-compact high-temperature data logger is ideal for food, industrial, and bio/medical applications. It can accommodate high-temperature/sterilization (HACCP/validation for Sterilization/Pasteurization) uses such as autoclaves and ovens. The ultra-compact low-temperature data logger is perfect for cold chain and food/bio/medical applications. It can handle low-temperature transportation and freezer/refrigerator management uses. We also offer multi-data loggers capable of measuring not only temperature but also humidity, pressure, and more. We provide calibration certificates and support for 21 CFR compliance, and we offer a range of services including the sale of battery kits.

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

This is a disposable (single-trip) temperature data logger for bio-medical, food, and industrial applications. It is compliant with 21 CFR regulations. Alarm values and measurement start/stop can be set to factory settings, eliminating the need for complicated personal settings. The logger itself comes with a USB port, so no additional accessories like a USB cable for PC connection are required. Furthermore, iMINI USB PDF allows you to easily check recorded results in PDF/CSV format without needing to install PC software on the receiving side. (Plug & Play)

• Data Logger
• Thermometer
• Sensors

This is a data logger with an LCD monitor that has a very wide temperature range (-100 to +150°C). It is capable of recording measurements for extremely high and low temperatures, such as in ovens or with dry ice. It can measure up to 2 channels using an internal temperature (humidity) sensor or a probe temperature sensor.

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

It is a super compact and robust high-speed sampling vibration and shock data logger with IP65 (life waterproof) rating. Multiple simultaneously measured vibration and shock data logger records can be compared on a single screen of a PC.

• Vibration Testing
• Impact Test
• Recorders

With a small amount of sample, the following measurements can be performed in just a few minutes. ✔ Magnetic Concentration: 'mg-Fe/ml or emu/g' ✔ AC Susceptibility: 'Re[Xac] and Im[Xac]' <Features> - Measurement possible with a small amount of sample (e.g. 0.1 ml magnetic fluid) - Fast detection (within 10 minutes) - Easy operation - Compact and space-saving - Compatible with a variety of samples (e.g. bulk, film, powder, fluid)

• Analytical Equipment and Devices
• Other physicochemical equipment
• Other inspection equipment and devices

Surface plasmon resonance (SPR), microarrays, biosensors, nanotechnology, neurobiology, self-assembled monolayers (SAM), X-ray diffraction (XRD), semiconductors, and a variety of research applications can utilize atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and other electron microscopy techniques. In addition to slide glass, we also offer silicon wafers and mica substrates. The main coatings are gold (Au), silver (Ag), aluminum (Al), and ITO. High-reflectivity gold-coated slides are ideal for observing backscattered electron images (BSE) (10-15 eV) and secondary electron images (SE) (5 eV) using SEM. For backscattered electron images <BSE>, a gold thickness of 10 nm is recommended, while for secondary electron images <SE>, products of 50/100 nm are suggested.

• Glassware and containers
• Other inspection equipment and devices
• Other consumables

Model Name: DST Nano-T Size: 6 x 17 mm, 1g (in Air and Water) Sensor: Temperature Measurement Range: 5 to 45 ℃ (Accuracy: ±0.2℃) Memory Capacity: 5,248 Data (7872 bytes) Battery: 9 months (Measurement Rate: 10-minute intervals) Package: Aluminum/Biocompatible Epoxy

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

Model Name: DST milli PU Size: 14 x 38.4 mm, in Air 9.2g / in Water 5g Sensor: Temperature, Pressure Measurement Range: 0 to 85 ℃ (Accuracy: ±0.2℃) Pressure Range: 0.06 to 10 bar Pressure Accuracy: +/-0.045 bar for a 10 bar pressure range Memory Capacity: 87,000 data (130,749 bytes / temperature, pressure each 1.5 bytes) Battery: 18 months (Measurement rate: every 10 minutes) Package: Aluminum (Ceramic)

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

Model Name: DST micro-HRT Size: 8.3 x 25.4 mm, 3.3g (in Air / Water) Sensor: Heart rate, temperature Temperature Range: 5 to 45 ℃ (Accuracy: ±0.2℃) Memory Capacity: 21,844 data Battery: 4 months (Measurement rate: every 10 minutes) Package: Aluminum (Ceramic) The "DST milli-HRT" is also available in the lineup.

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

The features of this product are as follows: - Temperature range: -25 to +80 ℃ - Compact size (79 x 43 x 12 mm) - Memory: 65,000 entries for temperature and 65,000 entries for humidity - Battery: Approximately 2 years (in timeout mode) CR2032 button battery x 2 - Protection: IP65

• Data Logger
• Temperature and humidity measuring instruments
• Recorders

This is a small temperature and humidity data logger. The main features are as follows: - Temperature / Humidity recording / Alarm display - Compact size (35 x 60 x 15 mm, approximately 26g) - Total memory of 131040 (65520 x 2 (T/H)) - Long battery life (CR2450 button battery) - NIST calibration certificate compatible (at the time of shipment) It is ideal for indoor temperature and humidity management (such as in museums and clean rooms) and for transportation temperature and humidity management. NIST calibration compatible models are also available. Please feel free to contact us.

• Data Logger
• Temperature and humidity measuring instruments
• Recorders