パンドウイットコーポレーション日本支社 List of Products and Services

Heat shrink tubing includes the "Standard Type (HSTT)" which is ideal for insulation, protection, termination processing, and identification of internal wiring in equipment; the "Yellow/Green Heat Shrink Tubing (HSTT)" which allows for identification and labeling of conductors that require protection, conductors without potential difference, ground conductors, and insulated conductors for electrical shock prevention; the "HSTTV Type (UL VW-1 Grade)" which is certified to VW-1 grade under UL standards; the "HSTTK Type Kynar Polyvinylidene Fluoride (PVDF)" which is semi-rigid with high heat resistance and excellent chemical and abrasion resistance; the "HSTTN Type (Elastic Neoprene)" which excels in flexibility, abrasion resistance, chemical resistance, and particularly oil resistance, using high-performance flame retardants; and the "HSTTT Type (Teflon)" which has high insulation, heat resistance, and excellent abrasion resistance. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

Spiral wrapping is used to bundle electrical wires, cables, tubes, etc., to prevent wear. There are seven types of materials suitable for indoor and outdoor use as well as harsh conditions, with outer diameters ranging from φ3.2mm to φ25.4mm. Panduit's cable ties can be used to secure the ends of the spiral wrapping. When wrapped tightly without gaps, the bundled wires are well protected, and insulation is improved. It is also possible to wrap with gaps, allowing for free spacing. Each package includes installation aids. The small quantity packaged spiral wrap is a convenient size and package for bringing to the job site. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other packaging materials

Pan-Wrap(TM) is designed to gently yet securely protect electrical wires and cables while maintaining their flexibility. Its unique slot shape enhances flexibility, allowing wires to be pulled out from anywhere as needed. The wide overlapping sections accommodate a wide range of bundle diameters with a single size, reducing the number of components required. The dedicated installation tool opens to 180°, enabling quick and easy insertion of the wire bundles, thus achieving a reduction in total costs. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Wiring materials
• Other work tools
• LAN construction and wiring work

The flexible bush is ideal for protecting wires that pass through panels, chassis, and more. Its snap-in design offers excellent flexibility, making installation easy. It can also be secured with adhesive. There are two shapes available: one with slits on the sides and one without. The standard type is made of nylon, while the roll type comes in two materials: polyethylene and weather-resistant polyethylene. The adhesive-backed option has adhesive on the inside, allowing for easy and secure installation without coming loose. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

The ISO warning labels of the PESW type are various warning labels based on the provisions of ISO 3864. They are made of high-quality vinyl film with adhesive backing, making them easy to apply anywhere. The material is vinyl, and the temperature range for use is -40°C to 80°C. There are card types for electric shock warning <ISO 3864-B3.6>, radiation warning, laser warning, hazardous area <ISO 3864-B3.1>, and static electricity warning, as well as roll types for electric shock warning <ISO 3864-B3.6> and high temperature warning. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

The label holder can be secured with cable ties (2.5mm/3.6mm width) or tack ties (6.4mm width). It comes with a transparent laminate to protect the text. The material is vinyl, and the operating temperature range is -18°C to 80°C. Additionally, the label core is used when applying self-laminating labels to thin fiber patch cords. It increases the display space and makes the printed content of the label easier to read. Being a sleeve type, it can be moved to a visible location. The material is PVC, and the operating temperature range is -24°C to 75°C. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

The writing marker tape allows you to easily create self-laminating labels. There are refill options available for the labels, and refilling is very simple. Warning labels come in a roll that is set in a case. The marker book is conveniently pocket-sized for portability. It can be easily cut along the perforation, allowing for display on both ends. The wire markers include PCM type, PCM type combination pack, PSM type self-laminating type, PPM type self-laminating type, and more. Additionally, we offer a tape holder that allows you to cut the tape simply by pressing a cover. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

Data labels (panmark labels) include self-laminating labels and blank labels compatible with various printers. A wide range of labels in terms of material and size is available. Label applications include types that can be used as product and production management labels, polyimide labels that can be used under high temperatures such as reflow and soldering surfaces of circuit boards, and self-laminating types that protect the printed surface from dirt, solvents, and oils. Additionally, when used in a flag shape, destination displays can be shown even after processing both ends. Dedicated printers include the PanTher LS8E/LS8EQ thermal transfer handheld printer and the TDP43ME/E thermal transfer printer. The Easy-Mark label printing software supports Japanese and allows for intuitive operation. It enables quick and easy destination labeling for cables and identification/management of various devices. For more details, please contact us or refer to the catalog.

• Wiring materials
• label
• Software (middle, driver, security, etc.)

Harness board accessories can speed up the wiring and forming of wires during harness assembly work. By keeping the wires at the same height from the harness board, bundling work can be done easily. To maintain the harness at approximately 33mm at the same height on the board, please use RER, ER, BR.75-E6, BR.5-E6, CPH.75-S8, TJF, SHH1-S8, and SHH3-S8. This height is suitable for use with fully automatic bundling tool systems PAT1M, PAT1.5M, and PAT2S. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Harness

The wiring fixture secures bundled wires without using cable ties. There are three types of fixing methods: the "adhesive fixing type," which can be secured with pre-attached adhesive tape; the "screw fixing type," which uses screws; and the "push-in fixing type," which can be secured without using screws or adhesive tape. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The cable tie holder allows for easy and efficient securing of bundled wires when used with cable ties. There are several fixing methods: the "adhesive fixing type," which can be secured with pre-attached adhesive tape used with cable ties; the "screw fixing type," which uses screws; the "push-in fixing type," which can be secured without screws or adhesive tape; and "special types," such as rotating tie mounts or clip-type holders. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

In the selection guide, you can choose fasteners suitable for your application, such as adhesive tape fasteners and adhesive fasteners. The materials include ABS, PVC, nylon 66, heat and weather-resistant nylon 66, noril, polypropylene, and zinc-coated steel. Additionally, the substrates for foam tape include polyethylene foam and VHB, while the adhesives consist of rubber-based adhesive tape, acrylic-based adhesive tape, and VHB. Rubber-based adhesives are suitable for general applications. Acrylic-based adhesives are suitable for outdoor use and high temperatures. Furthermore, VHB tape excels in weather resistance, heat resistance, and solvent resistance. VHB is a registered trademark of 3M. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

The MS type stainless steel band features a completely new buckle mechanism that is different from traditional methods. The binding time is reduced to half that of conventional products. The buckle lock secures the cut end of the band by folding it inward, making it safe to handle and resulting in a thinner binding section. It is suitable for harsh usage conditions such as radiation resistance, weather resistance, corrosion resistance, and heat resistance. The long type can be cut to the required length and used with the buckle (MSBW). It is suitable for binding thick cables and wires under severe conditions. Additionally, the nylon 11 coated tie provides insulation between different metals and, being coated with nylon 11, offers excellent chemical resistance and saltwater resistance. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Piping Materials

Stainless steel accessories can easily and efficiently secure bundles when used with stainless steel bands. The stainless steel mount has a thin structure, so it does not interfere when attached to cables or bundles. It can be secured with just one screw. The two-direction insertion type stainless steel fastener allows the stainless steel band to be inserted from two directions. Additionally, the flat panel hole mount is used to secure cables, wires, and hoses to partitions or flat panels. It is useful when work can only be done from one side of the panel. The marker plate is used to imprint letters or symbols with an engraving machine. It is excellent in corrosion resistance, wear resistance, and radiation resistance, allowing for semi-permanent labeling. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Piping Materials

The "MRT/MRS" is a tension-holding stainless steel band. "MRT" can maintain its strength during tightening without loosening even after being cut, regardless of the hardness of the object. "MRS" allows for a 360-degree seal. With our stainless band, it can now be used on "hard objects" that were previously impossible. 【Features】 ■ Strong holding strength ■ Automatic locking design ■ Chamfered surface edges ■ Three widths: S, LH, H *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Wiring materials
• Piping Materials

The MLT type stainless steel band is excellent in wear resistance, radiation resistance, weather resistance, and corrosion resistance. It is ideal for use in extremely harsh environments, such as indoor and outdoor applications, as well as underground burial. It can be quickly and completely secured with a dedicated tool, significantly contributing to total cost reduction. The surface is smooth and neatly chamfered, making it easy and safe to handle. The automatic locking type is cut flush at a consistent tightening strength when using the dedicated tool. Additionally, the long type can be cut to the required length, contributing to reduced inventory and management tasks. The nylon 11 coating protects the surface and does not damage the bundled wires. It also provides insulation between dissimilar metals. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The fully automatic bundling tool closes the beak by pulling the trigger lever, activates the start switch, and completes the processes of supplying, tightening, and cutting the bundling band within one second. With a reel containing 5000 bands (2500 for PAT2S), continuous bundling can be achieved, significantly reducing total costs. The head weighs only 800g, making it lightweight and alleviating operator fatigue, allowing for long hours of work without tiring. The bundling bands meet UL and MIL (MS3367-4) specifications. The dispenser with an LCD display allows monitoring of work status, troubleshooting, and the number of used bundling bands. Additionally, we also handle heads, dispensers, feeder hoses, dispenser frames, and bench mounts. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

Pneumatic strapping tools tighten and cut at a preset strength when the trigger is pulled. They use air pressure of 5.3 to 5.8 kg/cm². No special maintenance is required. The PTS/PTH features an ergonomic design and usability, improving work efficiency and reducing operator fatigue. The PPTEH is lightweight (weighing 1.47 kg), robust, and easy to operate, which helps reduce operator fatigue. The PPH10 is the hose that connects the tool to the regulator (3 m). For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The manual strapping tool with adjustable tension setting tightens and cuts at a pre-set strength when the trigger is pulled. We offer four types: GTS, GTSL, GTH, and GS4EH. Additionally, the manual strapping tool without adjustable tension requires the user to manually tighten and determine the strength before cutting. It is an economical and robust tool suitable for maintenance and on-site use, with three types available: STS2, STH2, and ST3EH. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

This is a dedicated fixture for tack ties. The dimensions are 28.4mm in length, 28.4mm in width, and 8.6mm in height, available in packs of 25 and 100. The materials include nylon 66 and flame-retardant nylon 66. The fixing method for "ABMT-A" is adhesive tape, while "ABMT-S6" uses M3 screws. The colors available are natural and black for "ABMT-A," and natural, black, and white for "ABMT-S6." For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Ultra-Cinch(TM) is made from soft, high-quality materials and can be safely used in wiring installation work. It is adjustable and can be repeatedly attached and detached. With a unique design that has hooks and loops on the same side, it can securely hold a wide range of bundled wires from small to large diameters. The low-profile buckle ring keeps the finished outer diameter small while securely fastening the bundles. The grommet-type design allows for strong and reliable bundling, and it can be fixed to cabinets, preventing the bundles from coming loose even when pulled. The tapered end makes it less likely to snag and allows for easy threading. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

Tak-Tape(TM) is a thin and flexible tack tape that allows for quick bundling of wires. It features hooks and loops on both sides for easy attachment. When wrapped around a bundle of wires, the tip securely stays aligned with the bundle. Available in long roll types of 6.1m and 10.6m, it can be cut to the desired length, minimizing waste. To ensure the specified loop tensile strength, please overlap by more than 50mm. Tape-Ty(TM) is also thin and flexible. With its non-slip seal, it allows for one-handed positioning even in tight spaces, enabling quick bundling of wires. It produces no cut debris and can securely bundle high-quality cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The Tak-Ty(TM) Tack Tie can bundle high-quality cables such as communication cables and optical fiber cables without over-tightening. It can be easily removed and reused, allowing for quick responses to frequent cable relocations, expansions, and changes. Unlike nylon cable ties, it is not affected by humidity. Additionally, it is resistant to vibrations and does not loosen. ~Free Sample Giveaway Campaign~ We are offering a sample bag containing three types of clips for free. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The kit box "KP-506A" is an indoor use kit (Nylon 66) that includes Pantai cable ties and mounts. The "KP-506A-0" is an outdoor use kit (weather-resistant Nylon 66) that also includes Pantai cable ties and mounts. The "KP-509" is an indoor use kit that is ideal for prototypes and new product development. It contains over 600 various products, including a wide range of shapes, sizes, colors, and various types of cable tie mounts and wiring fixtures. The "K-205" is an indoor use kit that includes Pantai cable ties, a tying tool, crimp terminals, splices, and crimping tools. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The Pan-Ty(TM) stud mount nylon tie wraps of the special type can be easily secured by simply pushing them onto a stud bolt. They are made of heat-resistant nylon, allowing for continuous use in high-temperature environments. Double loop tie wraps can secure or separate two bundles of wires, while triple loop tie wraps can secure or separate three bundles of wires. Additionally, double hose clamps can secure two hoses, such as hydraulic, pneumatic, or gasoline hoses, preventing twisting and wear of each hose. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Sta-Strap(TM) nylon tie (SST series) features a two-part molded head and tie. It is easy to insert and can be removed before fully tightening. The clamp type (SSC series) is a unique tie that can be secured even after being screwed in. It can also be fixed after tying. It can be removed before fully tightening. The marker type (SSM series) allows for both bundling wires and displaying identification simultaneously. The marker part can be used in both wrap-around and flag-type displays. The chassis/panel mount tie (SSPM series) can securely fasten bundles directly to the chassis without the use of fixtures. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

Inline cable ties have serrations on the outside, and the tie is inserted sideways into the head. This allows for large bundles of wires to be secured in a nearly round shape. Additionally, Hyper-V(TM) HyperV features a very strong loop tensile strength, allowing for a tight grip on the cable bundles. It has a unique two-wedge lock design with two locking claws on the top and bottom. The serrations are present on both sides of the strap, providing flexibility and accommodating irregularly shaped bundles. Since the strap is inserted sideways into the head, the head does not protrude, resulting in a smaller finished bundle. The entire design is rounded to prevent damage to wire insulation or the hands of workers. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The Belt-Ty(TM) standard type has a head height that is approximately 35% lower than conventional bands, preventing snagging of the head and resulting in a smaller overall bundle. The cut ends of the tie wraps do not protrude, so they do not harm surrounding cables or workers. Additionally, the elastomeric tie wraps are made from a flexible material that does not tightly squeeze communication cables. They are elastic, adhere closely to the cables, and prevent lateral movement. Made from halogen-free material, they have a UL94V-0 flame retardancy rating. They are removable and accommodate frequent relocation or expansion of cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Contour-Ty(TM) is a unique design that prevents damage to wires and cables. The head does not protrude significantly after bundling, resulting in a smaller overall bundle. The serration is on the outside, and the entire surface is beveled and smooth, preventing damage to the wire insulation. It is suitable for use in areas with continuous vibrations. Additionally, the heat-resistant nylon 66 can be used continuously in high-temperature environments. The color is light green (it may change to ochre due to temperature and humidity). The flame-retardant nylon 66 is made of UL flame-retardant grade 94V-0 nylon and is white in color. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Dura-Ty(TM) Super Reel Band is ideal for vertical trunk lines and rack binding that require strength. It is also highly weather-resistant, making it suitable for use in areas where stainless steel was traditionally used. It is perfect for outdoor construction, starting with power lines that require weather resistance and durability. Additionally, the slim type uses the same material as the conventional Super Reel Band, is narrower at 8.4mm, and is flexible, allowing for easy routing during installation while securely binding the cables. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The standard type of Dome-Top barb tie nylon cable tie uses 316 stainless steel for the locking part, which has minimal aging changes. The clamp type (BC series) is used to secure wires in locations such as chassis, panels, walls, and ceilings. The push-in type (BW series) is suitable for attaching bundled wires to flat surfaces like panels. The push-in type (BP series) can be easily installed by pushing into mounting holes. It features a design without wings, allowing installation in tight spaces. The marker type can simultaneously identify and bundle wires and cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The temporary type nylon cable tie allows for easy removal and reuse even after bundling by lowering the tab attached to the head. It can be used for temporary fastening when adding or repairing wiring. The temporary type nylon lashing tie is a heavy-duty version of the temporary type nylon cable tie. By using the mounting clip (MCEH-S25), it can be used as a clamp-type cable tie. Additionally, we offer clamp types, center push mount ties (for corrugated tubes), push-in types (PLWP/PRWP series), ladder-style cable ties (removable push-in type), umbrella wing push mounts, push-in types (PLP series), and marker type nylon cable ties. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Pan-Ty is a highly versatile standard type of nylon cable tie that can be widely used in places where bundling of wires, cables, and hoses is necessary. It can bundle items up to a maximum diameter of 330mm. The loop tensile strength ranges from 3.7kg to 79.4kg. There are 16 colors available for identification purposes, such as for bundling wire. It is an automatic locking integrated molded product. A wide range of sizes is available, from lengths of 71mm to 1100mm and widths of 1.8mm to 12.7mm. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Panduit offers a wide range of cable ties in various styles, materials, and colors. In terms of materials, there are standard nylon 66, weather-resistant, heat-resistant, and flame-retardant nylon 66, metal-filled nylon 66, super heat-resistant polyether ether ketone, fluoropolymer Tefzel with chemical and UV resistance, metal sensor detection type metal-filled polypropylene, weather-resistant polypropylene, chemical-resistant polypropylene, and Delrin polyacetal, which excels in stretch resistance, water resistance, and flexibility. Additionally, in terms of shapes, there are standard, screw-lock, push-in, marker, flag, temporary, inline, and long-length options available. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

○ It is possible to secure a wide display space on thin cables such as optical fiber cables. ○ With a unique design for the installation method, it is possible to choose whether to fix the label to the cable or to rotate/move it after installation. ● For more details, please download the catalog or contact us.

• label

○This label is ideal for network devices. ○It is suitable for displaying network devices such as patch panels, faceplates, and punch-down blocks. ●For more details, please download the catalog or contact us.

• label

- When displaying on thin optical fibers, using a label core can increase the display area, allowing for a label with more information to be attached to the cable. - The sleeve is made of flexible PVC. - It should be installed on the straight section of the cable at least 50.8mm away from the fiber boot. For more details, please download the catalog or contact us.

• label

○ The marker plate is suitable for indicating thick cables. ○ It can be installed after wiring. ○ It can be used in harsh environments. ● For more details, please download the catalog or contact us.

• label

The "Non-Laminated Label" for thermal transfer handheld printers is a non-laminated label for cable identification. It is made of a flexible material that can be wrapped around cables for display. It can be used for flag-type displays on electrical wires. The material is excellent in oil resistance and abrasion resistance, using vinyl cloth that can be repositioned, and nylon cloth that is highly heat resistant. For more details, please contact us or download the catalog.

• label

The "Component Label" for heat transfer handheld printers is a label that can be used for various purposes. It is suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution panels. The materials used are vinyl cloth, which is excellent in oil resistance and abrasion resistance and can be repositioned, as well as polyester, which is highly durable and can be used at high temperatures. Additionally, there is a polyester (super adhesive) that has strong adhesion capabilities even on rough surfaces, powder-coated surfaces, and coated surfaces. For more details, please contact us or download the catalog.

• label

At Panduit Corporation's Japan branch, we handle "Rotating Labels." The laminate protects the printed surface from dirt and wear. After application, the labels can rotate and slide. We offer a lineup for "Laser Printers" and "TDP43ME/E Thermal Transfer Printers." In addition, we also handle "Self-Laminating Labels" that protect the printed surface from dirt and wear, as well as "Marker Plates" and "Nameplate Labels for Distribution Boards." 【Features】 ■ Labels can rotate and slide after application ■ Easy installation ■ Laminate protects the printed surface from dirt and wear ■ Can be added after terminal processing ~ Free Sample Giveaway Campaign ~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• label
• Special labels, etc.
• LAN construction and wiring work

Use cable ties to secure the labels for vertical risers and other displays within the building. It can be labeled for cables of various diameters. The backing is A4 size. It can be clearly labeled with tags or plates for thick cables. For more details, please contact us or download the catalog.

• label

The adhesive is not included. It is used by inserting it into commercially available transparent pockets. It can be clearly displayed with tags or plates on thick cables. For more details, please contact us or download the catalog.

• label

The "Self-Laminating Label" for thermal transfer handheld printers allows you to print information such as the destination of electrical wires. By starting the roll from the printed area and covering it with the transparent part, the printed text is laminated to prevent fading and is protected from dirt, solvents, and oils. It can also display information after terminal completion. Please refer to the recommended cable sizes listed in the catalog for the appropriate cable size for the labels you will be using. For more details, please contact us or download the catalog.

• label

Peeling off the attached label will tear it, preventing opening or rewriting. It is recommended for security purposes. For more details, please contact us or download the catalog.

• label