坂口電熱 List of Products and Services

The "SCR-SHQ-A2" is a high-speed, high-precision, and high-performance temperature controller that achieves ultra-fast sampling at 10ms (0.01 seconds). It is ideal for controlling low-voltage heaters and for precise temperature control during rapid heating. It is portable, making it suitable for use on the go. 【Features】 ○ 11-segment 5-digit LCD display ○ Full multi-input for various thermocouples and resistance temperature detectors ○ AV100V to 220V (fluctuation range AC90V to 240V) ○ Minimum driving current 60mA ○ Equipped with a communication port for easy data management For more details, please contact us or download the catalog.

• Temperature and Humidity Control
• Heating device

● This is a new insulation material that is 20% more thermally efficient and 30% lighter than conventional insulation materials. ● It has excellent workability and can be manufactured into complex shapes. ● It is flexible, easy to install and remove, improving work efficiency during installation. ● It has heat resistance up to 400°C. (※) ※ The 400°C rating applies when the insulation cover is made of fiberglass. It may vary depending on other materials and usage environments. Please consult our sales representative when selecting.

• Piping Materials

【Points for Choosing This Product】 ● This is a new jacket heater that is 20% more thermally insulating and 30% lighter than conventional insulation materials. ● It has excellent processability, allowing for the production of complex shapes. ● It is flexible, easy to put on and take off, and improves workability during installation. ● It has a heat resistance of 400°C. (*) ● It can also be manufactured without a heater (as insulation material). Please feel free to contact us! * For product details, please refer to the catalog available for download below. * The 400°C rating applies when the insulation cover is made of fiberglass. It may vary depending on other materials and usage environments. Please consult our sales representative when making your selection.

• Piping Materials

Generators used as emergency power sources are required by law to undergo comprehensive inspections. Performance verification is conducted through load operation (continuous operation for a certain period under a load of 30% or more of the rated rotational speed and rated output) or internal observation, among other methods.

• others

Sakaguchi Electric's "Emifron" enables direct heating within a beaker through a fluororesin coating. Additionally, the temperature is evenly distributed, reducing the burden on the chemical solution. 【Features】 ■ Less likely to damage chemicals and allows for uniform heating ■ Excellent weather resistance and chemical resistance ■ Less prone to dirt accumulation and maintains cleanliness ■ Rapid temperature increase and high efficiency ■ Easy temperature control ■ Energy-saving and space-saving *For more details, please contact us directly.

• Other heaters

The "ÖLFLEX HEAT 650 SC" is a cable that is ideal for use in ambient temperatures ranging from -50°C to +650°C. It can be used in high-temperature environments where insulation and ambient temperatures are extremely high. Due to its nickel-stranded wire, it maintains excellent conductivity even at high temperatures and keeps low conductor resistance. 【Features】 ■ Operating temperature range: -50°C to +650°C ■ International standards ■ Excellent flame retardancy ■ Halogen-free *For more details, please request documentation or view the PDF data available for download.

• cable

"ÖLFLEX HEAT 180" is a silicone cable certified for North America, ideal for use in ambient temperatures ranging from -50°C to +180°C. It has obtained certifications from the United States (UL) and Canada (CSA), making it suitable for export machinery. The thick cable design meets the combustion test requirements of FT-1 and has received UL certification for external wiring of equipment and devices. It is highly flexible, can be used in tight spaces, and has excellent insulation properties. 【Features】 - Halogen-free (compliant with IEC60754-1) - Complies with cable flame retardancy tests (IEC60332-1-2 / CSA FT-1) - Excellent resistance to water, UV, and other weather conditions - Flexible conductor design - AWM certified *For more details, please request documentation or view the PDF data available for download.

• cable

The "Orflex Heat Series" is a heat-resistant electric wire that demonstrates excellent conductivity even in extreme high and low temperature environments. It offers superior flexibility, making it suitable for use in tight spaces, as well as products that excel in heavy industries and plants where temperatures can become very high, allowing you to choose based on the usage environment. This time, we will introduce two noteworthy products from this series. (Both are halogen-free and do not emit corrosive gases.) [Features] *Product catalog is currently available "Orflex Heat 180" - Complies with cable flame retardancy tests (IEC60332-1-2/CSA FT-1) - Excellent weather resistance against rain and UV rays - Obtained certifications from UL (USA) and CSA (Canada) "Orflex Heat 650" - Nickel stranded wire, providing excellent conductivity even at high temperatures - Maintains low conductor resistance - Operating temperature range: -50°C to 650°C

• cable

Germany's "LAPP" offers high-performance, high-quality cable-related products. They are active in various scenes and come in many versions. Starting with the data transfer system "UNITRONIC," which boasts high durability even in harsh usage conditions such as renewable energy equipment, we also provide cable glands "SKINTOP" for quickly attaching and sealing cables, as well as robust connectors "EPIC" in various shapes. 【Product Examples】 ■ Power cables that excel in various scenes ■ Cable glands for quick attachment and sealing between cables ■ Data transfer cables with high durability even in harsh usage conditions ■ Robust connectors that withstand various environmental conditions *For product details, please request materials or view the PDF data from the download section.

• cable

- It can be used in high-temperature ranges (MAX 800°C, continuous use at 700°C), has good durability, and the ceramic fiber jacket embedded inside improves energy efficiency. - Various terminal types can be manufactured. - We can flexibly accommodate requests for drilling or notching on the main unit through made-to-order production. ● For more details, please contact us or download the catalog.

• Ceramic Heater

- The fluoropolymer (PTFE) tube prevents the permeation of chemicals and protects the heater element from deterioration. - When used in conjunction with a temperature controller, it provides excellent heating characteristics. *This product does not comply with the PSE mark (Electrical Appliance and Material Safety Law), and is a specialized product intended for facilities that have high-voltage receiving equipment, where the voltage is transformed to 100V or 200V. ● For more details, please contact us or download the catalog.

• Other heaters

The "C-Mix" is a centrifugal stirring device that continuously discharges and sucks liquid through centrifugal force, mixing the entire contents uniformly from the bottom of the container without creating bubbles and quietly. Since it has no blades, it is gentle on materials and does not shear solid particles in the liquid. Additionally, by attaching a "heater" to the stirring device, it allows for simultaneous mixing and heating. It can also be used in the production processes of pharmaceuticals and food. We also accommodate product demonstrations and experiments at our Chiba factory. 【Features】 ■ The attachment of a heater to the stirring device enables efficient heat transfer to the material (the item being heated). ■ Mixing starts simultaneously with the heater activation, reducing dissolution time. ■ Without blades, it allows for soft stirring without breaking down materials even at high speeds. ■ Patent granted (No. 5690438). ★ Discover the charm of "C-Mix"! A manga is also available! ★ For more details, please check the download button below. ★ We will also be exhibiting at the "Kansai Machine Element Technology Exhibition" (from 10/5)! For more information, please refer to the catalog or feel free to contact us.

• Other machine elements

●Features 【Energy Saving】 By installing a heater on the stirring body, efficient "heat transfer" to the material (the item being heated) is achieved! 【Speed】 Stirring can start simultaneously with the heater switch-on, achieving a "reduction" in melting time! 【Gentleness to Materials】 Since there are no blades, even at high rotation speeds, the damage to the material is minimal, achieving "soft" stirring! ★ The C-MIX with heater can be customized in terms of material and shape according to your needs ★ For more details, please contact us or download the catalog.

• Other machine elements

The "Sami Composite Polyimide Heater" is a heater that can be used at temperatures ranging from 200°C to 250°C due to the use of a high-heat-resistant special polyimide film as an insulator that holds the heating wire. The foil-type heating wire is evenly arranged on the heater surface, resulting in a large heating area relative to the heater's surface area, which minimizes heating unevenness and enhances thermal efficiency. It is a lead-free product that does not use any solder. 【Features】 ○ High heat resistance ○ Uniform temperature distribution ○ Environmentally friendly ○ Low outgassing ○ Fast heating response *For more details, please refer to the catalog available for download or contact us directly.

• Other heaters

The "Micro Cable Air Heater" is a product that incorporates a micro heater processed into a special shape and inserted into a SUS pipe, making it ideal for heating air, nitrogen gas, and more. This product is used in various industrial fields, including semiconductor manufacturing. The special structural design using a sheath heater for the heating element has significantly improved the heating efficiency of gases. It is an energy-saving type of heater that reduces power consumption by approximately 15%. 【Features】 ○ High efficiency and rapid heating ○ Reduced surface temperature of the main unit ○ Energy-saving type For more details, please contact us or download the catalog.

• Other heaters

The "Micro Cable Air Heater N Series" is a product that incorporates a micro heater processed into a special shape and inserted into a SUS pipe, making it ideal for heating air, nitrogen gas, and more. This product is used in various industrial fields, including semiconductor manufacturing. By using a thin tube sheath heater for the heating element and designing a special bending structure, the heating efficiency of gases has significantly improved. 【Features】 ○ High efficiency and rapid temperature rise ○ Safe design → By controlling the temperature below the maximum usage temperature, overheating of the heater is suppressed. For more details, please contact us or download the catalog.

• Other heaters

【Fast Heating Response】This heater has a very thin thickness of 1mm, including heat-resistant insulation layers on both sides centered around the heating element, allowing for a rapid temperature rise. 【High Heating Efficiency】The heating element is in a foil shape, providing a larger contact area with the heated surface compared to linear elements, enabling faster heat diffusion and resulting in a heater with extremely high heating efficiency and minimal heating unevenness. 【Uniform Temperature Distribution】Using a heating element manufactured with precise density design and intricate etching technology, this heater corrects the temperature difference between the center and the surrounding areas, achieving a uniform temperature distribution. 【Wide Design Compatibility】Multiple heating circuits can be accommodated on the same heater surface, allowing for flexible designs such as creating temperature gradients according to application needs. 【Easy Handling】Regardless of the shape of the object to be heated, whether flat or curved, it can be used by adhering it. It can be safely used in combination with temperature fuses, thermostats, and temperature controllers.

• Other heaters
• Electric furnace
• Heating device

The "Samicon Super 340II" is a thin, lightweight, and highly flexible surface heater that features high-temperature heater elements bonded with heat-resistant electrical insulation materials. It can be used at temperatures up to 300°C, and with a thickness of 1.15mm and a thin insulating layer (silicone rubber), it has a small thermal mass, allowing for a rapid heating response to the workpiece. 【Features】 ○ High-temperature usage ○ Fast response ○ Wide variety ○ High thermal efficiency ○ Excellent temperature uniformity For more details, please contact us or download the catalog.

• Other heaters
• Silicon Heater

The "Samicon 420" is a high-temperature rubber heater that can be used at a constant temperature of 350°C due to its uniquely developed flame-retardant silicone rubber. The small heat capacity of the insulating material (silicone rubber) allows for a rapid temperature rise response of the heated object (workpiece), and because the heating element is in a foil form, it has less heating unevenness compared to wire-type heating elements, resulting in high thermal efficiency. It is a lead-free product that does not use any solder. 【Features】 ○ Capable of high-temperature use ○ Fast response ○ Large heating surface area ○ Uniform temperature distribution ○ Environmentally friendly For more details, please contact us or download the catalog.

• Other heaters
• Silicon Heater

We have many years of sales experience as a pioneer in cartridge heaters. We also handle products that comply with UL/CSA standards. 【Features】 ○ The standard type heater is designed for continuous use at an internal temperature of 680°C. ○ The lead section is securely crimped, making it structurally capable of withstanding mechanical vibrations and impacts. ○ We accept processing of various lead variations according to your preferences. For more details, please contact us or download the catalog.

• Other heaters

Sakaguchi Electric Heating Co., Ltd. is the general agent for WATLOW's FIREROD cartridge heaters in Japan. We have a long track record of sales as a pioneer in cartridge heaters. We will deliver products that comply with CE/UL/CSA standards according to your requirements. 【Features】 - High watt density and high efficiency - Long lifespan at high temperatures - Abundant stock - UL/CSA/CE standards For more details, please contact us or download the catalog.

• Other heaters

We have a wide variety of products available for different uses, such as for water, oil, and chemical solutions. 【Product Lineup】 ○ HP/SOP Type Plug Heater ○ Immersion Type Pipe Heater ○ Pipe Heater "with Bush" For more details, please contact us or download the catalog.

• Other heaters

The micro ceramic heater series features products that have high-temperature, high-insulation alumina substrates with high-temperature resistant heating elements printed with high precision and integrated with the lead section. We offer products that can withstand temperatures of 500℃, 600℃, and 1000℃. 【Product Lineup】 - MC0505 - MC1010 - MC2525, among others For more details, please contact us or download the catalog.

• Ceramic Heater

The "MSN-1100" is a silicon nitride heater that incorporates a highly reliable heating element capable of withstanding high temperatures of 1100°C, integrated into a silicon nitride substrate that excels in high temperature, high insulation, and thermal shock resistance. It has a low coefficient of thermal expansion, excellent thermal shock resistance, and outstanding oxidation and chemical resistance. 【Features】 ○ Maximum operating temperature: 1100°C ○ High surface power density (W/cm²) ○ Excellent electrical insulation and dielectric strength For more details, please contact us or download the catalog.

• Other heaters
• Ceramic Heater

Watlow UltraMic® is an aluminum nitride heater that provides optimal performance in the development of semiconductors and electric vehicles (EVs). This heater, with its high thermal conductivity, ability to respond to rapid temperature changes, stable electrical characteristics even at high temperatures, and built-in thermocouple structure for precise temperature control, meets advanced thermal processing needs. 【Features】 - Utilizes a high thermal conductivity aluminum nitride substrate - Supports rapid heating (up to 150°C/sec) and rapid cooling - Excellent electrical characteristics - Built-in thermocouple (Type K) structure For more details, please contact us or download the catalog.

• Other heaters

The "band heater" uses heat-resistant mica, has excellent electrical properties, good thermal conductivity, and is an efficient heater. The outer covering steel plate is processed by pressure forming using stainless steel or heat-resistant steel. The "mica strip heater" is made by uniformly winding high-quality nickel-chrome ribbon wire around heat-resistant mica, further insulating it with mica, and then covering it with a metal plate, which is then formed by a powerful pressing machine. 【Features】 [Band Heater] ○ Durable ○ Efficiently heats by closely adhering to the heated object [Mica Strip Heater] ○ Robust both electrically and mechanically For more details, please contact us or download the catalog.

• Other heaters

The "MIE Band Heater" is a band heater that has been improved with a moisture-resistant structure and is suitable for high temperatures with engineering plastic molding. It enhances the insulation performance of the conventional MI band heater, with a leakage current of less than 1mA during stable heating, allowing for long-term use. It can be manufactured up to 15W/cm² depending on dimensions and shapes. CE-compliant products can be delivered upon request. 【Features】 ○ High insulation performance during high-temperature use ○ Capable of high-temperature use (maximum operating temperature 760°C) ○ High watt density ○ Stainless steel cover structure ○ Simple design for easy installation For more details, please contact us or download the catalog.

• Other heaters

The "Nozzle Wire Heater" is a heater that provides effective thermal energy due to its square type with surface contact, compared to the conventional round wire type. The lead end has a non-heating section ranging from 38.1mm to 50.8mm (only for the non-heating parts of U-1, U-7, and U-10). A thermocouple can be built into the center of the heating section. Standard products are kept in stock in a straight state. Please specify the processing dimensions for coiling. We will process and deliver it. 【Features】 ○ Non-heating structure at the terminal section → Reduces the risk of disconnection at the lead end ○ Thermocouple can be built-in (U-1 to U-5, 200V only) For more details, please contact us or download the catalog.

• Other heaters

The "Silicone Belt Heater" is an optimal belt heater for heat retention and heating in low to medium temperature ranges. The "Silicone Cord Heater" is a product where a heating wire is spirally wrapped around a glass cord and coated with heat-resistant silicone rubber, offering excellent flexibility and high electrical insulation. 【Features】 [Silicone Belt Heater] ○ Uniform heating ○ Wide range of watt specifications ○ Broad applications [Silicone Cord Heater] ○ High flexibility ○ Can be cut to any desired length for use For more details, please contact us or download the catalog.

• Other heaters
• Silicon Heater

The "Ribbon Heater" is a product that incorporates heating wires (glass-coated nichrome wire) within a fabric woven from heat-resistant glass fibers. It has attachment cords on both sides of the heater, making it easy to attach and detach, and allows for immediate heating. It can be manufactured in complex shapes, making it suitable for applications such as pipe heating in the semiconductor field, and it has a proven track record. 【Features】 ○ High flexibility ○ Uniform heating ○ Abundant stock For more details, please contact us or download the catalog.

• Other heaters

The "Far Infrared Ceramic Heater" is a heater that achieves reduced heating and drying times by adopting a high-efficiency radiation element. The heat from the far infrared ceramic heater, which uses radiation heating, has the characteristic of being absorbed by the heated object in the form of direct electromagnetic waves, making it widely used as a high-efficiency, energy-saving heat source. When the wavelength of the far infrared electromagnetic waves matches the absorption wavelength of the heated object during use, the heating efficiency is maximized. Due to its uniform surface heating element, it can heat evenly. 【Features】 ○ Allows for precise temperature control and control by block ○ Further high-precision control is possible by using a built-in sensor type ○ The heating element is embedded and the radiation surface is ceramic-coated → Minimal shock from rapid heating and cooling ○ Performance remains stable even after long hours of use → Reduces running costs ○ The heating element is in block units → By connecting two or three units, facilities can be easily created according to needs, making it economical For more details, please contact us or download the catalog.

• Other heaters
• Ceramic Heater

The "ITT Heater Series" is a high-temperature compatible space heater developed by Vulcan Electric. The heater features a structure where the heating element is insulated with compressed magnesia powder, allowing it to be used at higher temperatures than mica-type space heaters. The "ITT Heater Series" includes the "ITT Strip Heater" and the "ITT Fin Strip Heater." 【Features】 ○ Minimal insulation degradation and maintains high insulation ○ The exterior is made of SUS, making it robust ○ UL certified ○ Special anti-corrosion treatment applied For more details, please contact us or download the catalog.

• Other heaters

The "Ceramic Fiber Heater" is a heater that embeds heating elements in a specific arrangement within high-temperature insulating ceramic fiber, forming a single unit. The heater can be made in any shape and is lightweight compared to bricks and refractory ceramics. It excels in heat resistance, insulation properties, and heating characteristics, making it widely used in high-temperature electric furnaces and tubular kilns. It can be used at temperatures up to 1200°C, ensuring cost reduction and high productivity from small-scale experiments to large-scale heating devices. 【Features】 ○ High-temperature characteristics ○ Fast response ○ High quality (consistently manufactured due to unique manufacturing equipment and processes) ○ Custom-made options (design and manufacture of divided heating zones and multiple furnace configurations) For more details, please contact us or download the catalog.

• Other heaters
• Ceramic Heater

Germany's "LAPP" offers high-performance and high-quality cable-related products. They are active in various scenes and come in many versions. Starting with the data transfer system "UNITRONIC," which boasts high durability even in harsh usage conditions such as renewable energy equipment, we also provide cable glands "SKINTOP" for quickly attaching and sealing cables, as well as robust connectors "EPIC" in various shapes. 【Product Examples】 ■ Power cables that perform well in various scenes ■ Cable glands that quickly attach and seal between cables ■ Data transfer cables with high durability even in harsh usage conditions ■ Robust connectors that withstand various environmental conditions *For more details, please request materials or view the PDF data available for download.

• cable

The "SCR・SSR Series" is a box-type temperature controller that can be used as a high-function control device simply by connecting inputs, outputs, and sensors. Equipped with the TRU-TUNE function, it detects temperature changes caused by disturbances (such as variations in workpieces or opening and closing of doors) and automatically adjusts to appropriate PID parameters. It has a handle for easy portability. It is also recommended for use in laboratories, experiments, and for expanding production processes. 【Features】 ○ Latest control algorithm ○ Communication function: RS-485 equipped ○ Simplified settings through dedicated software ○ Customizable EZ key included ○ Can be used with a free power supply (100V–240V 50Hz/60Hz) (except for SSR-T20-EZ) For more details, please contact us or download the catalog.

• Temperature and Humidity Control

A "thermocouple" is a frequently used type of temperature sensor. It utilizes the phenomenon of "creating a closed circuit by electrically connecting the ends of two different types of metal, and generating a thermoelectric voltage in response to a temperature difference when one end is heated (the Seebeck effect)," and is structured to measure temperature using this thermoelectric voltage. Sakaguchi Electric Co., Ltd. offers a variety of products, including sheath thermocouples, temperature measuring resistors, and compensation wires. 【Products Offered】 ○ Standard products (T-35 type sheath thermocouple (K type), etc.) ○ Made-to-order products (ultra-fine sheath thermocouples, etc.) ○ Other standard products For more details, please contact us or download the catalog.

• Sensors
• Other temperature and humidity measuring instruments

A "bimetal thermostat" is a temperature regulator composed of a bimetal made by bonding metal plates with different thermal expansions and contacts. It operates by the bimetal expanding slightly due to temperature changes, which activates the contacts. The shape is designed in various ways to suit different applications.

• Temperature and Humidity Control
• Other temperature and humidity measuring instruments

Sakaguchi Electric Heating Co., Ltd. offers a variety of thermocouple connectors. The thermocouples and jack panels are excellent in heat resistance and impact resistance, and they are easy to install. We have a rich selection of various products. Since our products adopt the ASTM/ANSI color code, you can choose the desired connector regardless of whether you are domestic or international. 【Products Offered】 ○ Standard Connectors ○ Quick Key Connectors ○ Miniature Connectors ○ 3-Pin Thermocouple Connectors with Shielded Terminals ○ Miniature Connectors, Twinters, and others For more details, please contact us or download the catalog.

• Sensors
• Other temperature and humidity measuring instruments
• Other Connectors

Sakaguchi Electric Heating Co., Ltd. offers a variety of heating materials, including various boards and sheets. Sakaguchi Electric Heating not only provides heating solutions but also offers a range of related components, ensuring that all necessary parts for "heating" are available. We provide a comprehensive selection of components to propose the optimal heating system for our customers. 【Products Offered】 ○ Various boards and sheets, various ribbons ○ Various fluoropolymer tapes ○ Various tapes ○ Various tubes ○ Various adhesives For more details, please contact us or download the catalog.

• Adhesive tape
• glue

The "Peltier module" is an arrangement of an arbitrary number of P-type and N-type thermoelectric semiconductors alternately joined in series with copper electrodes. When a current is passed through this element, heat transfer begins (the phenomenon of heat absorption and generation known as the "Peltier effect"), and by changing the current, the amount of heat absorbed can be varied. The "Peltier controller" is a dedicated control device that regulates the temperature of the Peltier element, allowing for precise temperature adjustment to any desired level. 【Products Offered】 ○ Peltier module ○ Peltier cooler unit ○ Peltier module unit type ○ Peltier unit ○ Sakaguchi Peltier kit, and others For more details, please contact us or download the catalog.

• Temperature and Humidity Control
• Peltier element
• Cooling system