ホトロン List of Products and Services

We install vehicle detection sensors suitable for the scale and method of coin parking, such as gate-type/flap-type (lock-type), gate-less/flap-less (lock-less), and provide real-time occupancy information. This ensures accurate occupancy display for safe coin parking operations.

• Signal lights and rotating lights
• Indicator Light
• Sensors

For managing occupancy in small parking lots, the "space management method," which involves installing sensors for each parking space to display availability with higher accuracy, is recommended. In small parking lots, maneuvering vehicles can be difficult, and if a driver mistakenly enters, they may have to back out, leading to customer stress and potential accidents. Therefore, by installing sensors for each parking space to ensure accurate occupancy displays, unnecessary entries of new vehicles can be reduced, enabling safe parking lot operations. ■ Target Products - Vehicle Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic type) - Vehicle/Pass Detection Sensor HM-LC6 (Relay type, Loop coil type) - Vehicle Detection Sensor HM-LC7/LC7-FLS (Communication type, Loop coil type) - Vehicle/Pass Detection Sensor HM-S6 (Buried type, Magnetic type) - Vehicle Detection Sensor HM-S8 (Exposed type, Magnetic type) ■ Introduction Video for Vehicle Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Signal lights and rotating lights
• Indicator Light
• Sensors

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. In large parking lots, there are "floor management methods/block management methods" that prioritize cost reduction and "parking space management methods" that prioritize high accuracy. The floor management/block management methods involve installing sensors at specific points to count and manage the number of passing vehicles. These methods are easy to install and cost-effective. The parking space management method involves installing sensors in every parking space to manage each vehicle individually, achieving high-precision parking management. ■ Target Products - Vehicle Count Sensor CCS2 (Ceiling-mounted, Infrared method) - Occupancy Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic method) ■ Introduction video for the Occupancy Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Signal lights and rotating lights
• Indicator Light
• Sensors

The "HM-LC7/LC7-FLS" is a vehicle detection sensor using a communication-type loop coil system. The loop coil sensor is a simple vehicle detection system formed by a coil and a controller. It detects general vehicles in parking lots and traffic management systems. Since each detector is connected via communication lines, it places less burden on installation compared to relay types. It can be configured for up to 100 parking spaces. 【Features】 ■ Loop coil type detector aimed at general vehicles ■ Vehicle detection results are reported to the payment machine via communication (RS-485) ■ Configurable for up to 100 parking spaces ■ Each detector is connected via communication lines, reducing installation burden compared to relay types ■ Flap plate can be raised or lowered based on communication instructions from the payment machine (only for HM-LC7) ■ HM-LC7-FLS is for flapless (no locking plate) use ◎ For more details, please contact us or download the catalog.

• Sensors

"KABUTO" is an industrial sensor designed for installation at heights ranging from 3.5m to 6.5m. It features a long-range radar and a wide infrared area combined sensor. It detects only the desired direction through its directional detection function. 【Features】 ■ IP65 industrial sensor ■ Detects the entry and presence of packer trucks at waste disposal sites ■ Monitors trouble spots at merging locations from a high vantage point ■ Alerts to potential contact accidents involving forklifts within factories ■ Capable of monitoring from a height of 6.5m, with settings adjustable via remote control ■ Ensures stationary detection in a wide infrared area; directional management is possible when used across all areas ■ Manages lateral directionality with cross-traffic functionality ■ Easy installation and initial setup ◎ For more details, please contact us or download the catalog.

• Sensors

The "HM-S8" is an exposed type park sensor that does not require installation and is less affected by natural environments such as rain and snow, as well as geomagnetic influences. It is installed next to the flap plate, eliminating the need for burial during construction. The vehicle detection results are reported to the payment machine via communication (RS-485). 【Features】 ■ Less affected by natural environmental factors such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IPX7 ■ Does not detect humans or animals ■ Installed next to the flap plate (no burial required) ■ Usable without a flap (passage is not allowed) ■ Cables available in 1.5M and 2M lengths ■ Achieves high-accuracy occupancy management in small parking lots *For more details, please refer to the PDF document or feel free to contact us.

• Safety Sensors
• Sensors

The seismic sensing device "HK-2" is a product that can automatically perform various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 weak or higher. For example, it can automatically execute actions such as: "Open automatic doors to secure an escape route" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers and release disaster prevention goods" "Automatically play pre-set voice guidance" 【Product Features】 ■ Detection sensitivity can be set to 4 levels (equivalent to seismic intensity 5 weak to 6 weak) ■ Detection output hold time: 2 seconds, 10 seconds, 30 seconds, 60 seconds, 5 minutes, 30 minutes, 60 minutes, ∞ ■ Operation status can be understood through LED lighting and blinking ■ Easy to use in a wide range of scenes with DC12-24V specifications ■ Compact and easy to install. Recovery is also simple with a reset switch *Please refer to the accompanying materials. Feel free to contact us with any inquiries.

• Sensors
• Other measurement, recording and measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 Clinic 【Challenge】 There was a staff waiting room right next to the automatic door, and every time staff went to the waiting room, they triggered the sensor area, causing the automatic door to open and close unnecessarily. 【Solution】 Non-contact mounted beam touch sensor HA-T401 【Effects After Installation】 Although we considered switching to a touch type, using a non-contact beam touch sensor allowed for the automatic door to be used without contact, eliminating unnecessary opening and closing, which was beneficial. ◎ Please feel free to download the catalog or contact us.

• Sensors
• switch
• Sensors

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Store 【Challenge】 There was a challenge where a counter was located near the automatic door, causing the detection range of a typical infrared sensor to overlap. 【Solution】 Non-contact beam touch sensor HA-T401 【Effects After Installation】 The non-contact beam touch sensor has a compact detection range, allowing the door to open and close without interference from the counter. ◎ Please feel free to download the catalog or contact us.

• Sensors
• switch
• Sensors

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Retail Store 【Challenge】 There was a challenge in that a sign was located directly above the automatic door, preventing the installation of a sensor that is typically mounted on the exterior. 【Solution】 Built-in Beam Touch Sensor HA-T520 【Effects After Installation】 The HA-T520 is a type that is built into the door frame, allowing the sensor to be installed without being obstructed by the sign, thus resolving the issue. ◎ Please feel free to download the catalog or contact us for more information.

• Sensors
• switch
• Sensors

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Retail Store 【Challenge】 In a building with a focus on aesthetics, we wanted the sensors installed on the automatic doors to be inconspicuous. 【Solution】 Recessed Beam Touch Sensor HA-T520 【Effects After Installation】 The recessed sensor was installed below the threshold, making it inconspicuous and helping to maintain the aesthetics. Additionally, its non-contact design contributed to infection control measures. ◎ Please feel free to download the catalog or contact us.

• Sensors
• switch
• Sensors

We would like to introduce a case study on the latest automatic door sensor from Hotron. 【Installation Location】 Store 【Challenge】 Touch switches were used for the automatic doors, but many customers touched them upon entering, leading to concerns about infection control. 【Solution】 Non-contact built-in light touch sensor HA-T520 【Effects After Installation】 By using a non-contact light touch sensor, customers can enter without touching, reducing anxiety about infections. ◎ Please feel free to download the catalog or contact us.

• Sensors
• switch
• Sensors

The "HA-T Series" is a non-contact automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing a hand close, addressing hygiene concerns even in facilities used by a large number of people. The sensor's detection range can be set in four configurations: left, center, right, and 12 spots, allowing customization according to the environment in which the automatic door is used. 【Features】 ■ Four spot settings tailored to the usage environment of the automatic door ■ Non-contact and hygienic opening and closing achieved through a light touch sensor ■ Reduces unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy savings ■ Two types of light touch sensors are available: "non-vision mount type" and "non-vision built-in type" ■ The "non-vision built-in type" features a flat design that does not stand out when mounted on the door *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Sensors

The "HA-T520" is a non-contact light touch sensor suitable for buildings that prioritize aesthetics and for locations requiring a narrow detection range. Being a built-in type without visible openings, it maintains the aesthetic of the building and contributes to energy-saving measures and infection control by reducing unnecessary door openings with its light touch function. When the light touch function is turned OFF, it can also be used as a built-in infrared sensor with a wide detection range. 【Features】 ■ Non-contact and hygienic ■ Flat design that preserves the aesthetics of the entrance ■ Adaptable to various door types with four detection range settings ■ Two-stage detection condition settings reduce unnecessary door openings and contribute to energy savings ■ Can also be used as an infrared sensor with a wide detection range *For more details, please refer to the PDF document or feel free to contact us.

• Area Sensor

Energy-saving measures and infection control! Upgrade your facility environment with a non-contact light touch sensor! The 'HA-T401' can be configured to match the usage environment, allowing for touch area settings in four spots on the left, center, and right, as well as a total of 12 spots in four different configurations. You can open and close the automatic door just by bringing your hand close, ensuring hygiene and peace of mind without touching. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Four spot settings to adapt to various door types ■ Non-contact solution for hygiene issues ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Sensors

The 『HA-T401』 is an automatic door sensor that opens only for people who want to enter, whether on a busy street or in a narrow passage, without any contact. Depending on the usage environment, the touch area can be set to four spots on the left, center, and right, as well as a total of twelve spots in four different configurations. The automatic door can be opened and closed simply by bringing a hand close, making it hygienic and safe without any touching. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Adapts to various door types with four different spot settings ■ Addresses hygiene issues with a non-contact design ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Sensors

The "PHW-03B" is an automatic liquid spray dispenser that detects when a hand is extended and sprays disinfectant. When combined with a wireless touch switch, it can wirelessly link with automatic doors. When the liquid is sprayed, a signal is transmitted to open the automatic door, ensuring thorough hand disinfection. 【Features】 ● The number of sprays can be selected to either one or two. ● Compatible bottle size: up to approximately D85×W95×H185–250mm. You can use your own bottles in addition to the dedicated ones. ● Recommended for entrances to restrooms in food-related facilities and factories where hygiene management is required. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other safety and hygiene products

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux, accommodating various situations from passing to stationary vehicles. It is recommended for use with the opening and closing of waste disposal plant doors, as well as for gates where vehicles pass and outdoor parking applications. It can also be installed on reinforced concrete or steel plates. 【Features】 ■ Less susceptible to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 to reduce water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on reinforced concrete or steel plates *For more details, please refer to the PDF materials or feel free to contact us.

• Safety Sensors
• Sensors

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We will address various concerns and challenges you may have. 【Challenge】 We want to ensure that only residents of the apartment can call the elevator to prevent unauthorized access. 【Solution】 Install a facial recognition device so that only registered individuals can call the elevator. ◎ Please feel free to contact us.

• Entrance and exit control system
• Other safety equipment
• Surveillance Cameras

The Hotron automatic door sensor can be used not only for automatic doors but also for opening and closing elevators and calling them. We will address various concerns and challenges you may have. 【Challenge】 We want only staff to be able to call the elevator in facilities for dementia patients. 【Solution】 Install a facial recognition device so that only registered individuals can call the elevator. ◎ Please feel free to contact us.

• Entrance and exit control system
• Other safety equipment
• Surveillance Cameras

The Hotron automatic door sensor can be used not only for automatic doors but also for opening and closing elevators and calling them. We will address your various concerns and challenges. 【Challenge】 I often have my hands full with luggage, so I want to use my feet to call the elevator. 【Solution】 Place your foot on the foot switch to call the elevator. ◎ Please feel free to contact us.

• Sensors
• Safety Door Switch

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We will address your various concerns and challenges. 【Challenge】 I want to call the elevator without touching the buttons, which are prone to viruses and bacteria. 【Solution】 Wave your hand over the non-contact switch to call the elevator. ◎ Please feel free to contact us.

• Sensors
• Safety Door Switch

Recently, there has been increasing attention on non-contact switches as a measure against viral infections. To prevent contact infections from doors and elevators that are touched by a large number of people, non-contact solutions are being sought. 【Installation Location】 Department Store 【Issue】 There have been accidents where people's hands get caught near the elevator doors, and we want to announce "The elevator is coming. Please step back" when someone approaches the door. 【Solution】 Install an infrared sensor in the elevator that announces through a speaker when a person enters the area. 【Product to be Introduced】 Non-Visible Mounting Infrared Sensor HA-400 Hotron's automatic door sensors can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We are here to address your various concerns and challenges. ◎ Please feel free to contact us.

• Sensors
• switch
• Sensors

Recently, there has been a growing focus on non-contact switches as a measure against viral infections. To prevent contact infections from doors and elevators that are touched by a large number of unspecified individuals, there is a demand for non-contact solutions. 【Installation Location】 Office Building 【Challenges】 - We want to install an anti-pinch sensor because carts can get caught in the service elevator. - The conventional beam sensor we had installed could not detect carts that slipped through, leading to pinching. 【Solution】 Install an infrared sensor in the service elevator that prevents the doors from closing when a person or object enters the area. 【Product Introduced】 Built-in Infrared Sensor HA-520 Hotron's automatic door sensors can also be used for opening and closing elevators and calling them, in addition to automatic doors. We are here to address your various concerns and challenges. ◎ Please feel free to contact us.

• Sensors
• switch
• Sensors

Hotron's [Face Recognition and Non-Contact Entry and Exit Management System] can be utilized to enhance security in apartments and offices, as well as for infection control measures. The product lineup includes a "Non-Contact Switch" that allows doors to be opened and closed simply by waving a hand without touching doorknobs or switches, an "Automatic Disinfectant Spray" that dispenses disinfectant automatically, and a "High-Speed Face Recognition Device" equipped with deep learning capabilities. It reduces the risk of virus and bacteria infections in places where hygiene is a priority, such as food factories, hospitals, nursing facilities, and restaurant kitchens. [Biometric Authentication Devices] ○ Face Recognition Terminal DS342 (Compact Design) ○ Face Recognition Terminal DS372F (Felica Compatible) [Automatic Disinfectant Spray] ○ Automatic Disinfectant Spray PHW-03B (Linked to Automatic Doors) [Non-Contact Switch] ○ Microwave Hand-Waving Sensor DHS-1 ◎ For more details, please download the catalog or contact us.

• Entrance and exit control system
• Other safety equipment
• Surveillance Cameras

The "DS Series" is a high-speed facial recognition device that achieves faster facial recognition with high accuracy. Facial recognition speed is under 0.2 seconds, with an accuracy of over 99%! It can be used in various locations such as medical facilities, public facilities, environmental facilities, educational institutions, and office buildings, reducing the risk of virus and bacteria transmission as an entry and exit system. You can choose from three types according to your location and application. ■ Product Lineup 【Facial Recognition Terminal DS342】 - High-speed facial recognition with deep learning - Compact smartphone size - Supports mask recognition 【Facial Recognition Terminal (Felica compatible) DS372F】 - High-speed facial recognition with deep learning! Equipped with a Felica card reader - 7-inch tablet size ◎ For more details, please download the catalog or contact us.

• Entrance and exit control system
• Other safety equipment
• Surveillance Cameras

Introducing a case of implementing a non-contact switch in a medical facility! **Challenges Before Implementation** To prevent the occurrence and spread of hospital-acquired infections, we decided to install new automatic partition doors within the existing building. We wanted the doors to not open just by passing nearby and did not want to operate them manually like a touch switch. We were recommended a non-contact switch that only requires waving a hand without touching. **Product Implemented** Non-contact switch "PF-R5" - A hand-waving sensor that opens and closes the door when the built-in beam switch's light is obstructed, with easy adjustment for fine angle settings. - Beam switch angle can be adjusted in three patterns: front, downward, and left/right! - Hygienic since there is no direct contact with the switch! - Waterproof and dustproof structure. **Effects After Implementation** The direction of hand waving can be changed, allowing for usage that fits practical operations.

• Sensors
• Safety Door Switch

Introducing a case study of the implementation of a non-contact switch in a food factory! **Challenges Before Implementation** The aisles were narrow, and there were instances where the door would open when workers passed close to the sensor, necessitating an urgent adjustment of the area from facing forward to downward. **Implemented Product** Non-contact switch "PF-R5" - A hand-sensing sensor that opens and closes the door when the beam switch's light is obstructed, with easy adjustment of fine angle settings. - Angle adjustment of the beam switch in three patterns: front-facing, downward, and sideways! - Hygienic since it does not require direct contact with the switch! - Waterproof and dustproof structure. **Effects After Implementation** The direction of the arrow on the sensor surface indicates where to place your hand, making it easy to understand that it is a switch. The area adjustment was very simple and could be done easily by removing the cover, which was extremely helpful.

• Sensors
• Safety Door Switch

The "Microwave Non-Contact Switch for Automatic Doors DHS-1" is a microwave hand-sensing sensor that allows you to open and close doors simply by waving your hand. It is suitable for hygienic environments such as food factories, hospitals, and nursing facilities. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact. - The adoption of microwave technology significantly reduces malfunction due to condensation in environments with temperature differences, such as cold storage. - Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable). - LED display and response sound allow for easy confirmation of detection status at a glance. For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

The "foot switch" can be operated at your feet to open and close automatic doors. It is widely used in places like food processing factories, hotel kitchens, and restaurant kitchens, where both hands need to be free. Even with large work sandals, the "PF-01S" or "PF-03S" with a wide opening can open and close automatic doors. It reduces the risk of virus and bacterial infections in places like food factories and dining facilities where hygiene is a concern. 【Features】 ○ Reduces the risk of virus infection as doors can be opened and closed without touching them ○ Allows hands to be free since it can be operated at your feet ○ Suitable for places like food factories and dining facilities where hygiene is a priority ○ Prevents unnecessary detection due to the switch mechanism ◎ For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

It is a non-contact switch that allows you to operate and open/close automatic doors at your feet, freeing up both hands and excelling in hygiene. The "PF-01S" is a slim vertical beam type foot switch with a wide opening. Its slim design allows for the installation of two foot switches at the same height, both inside and outside. The stainless steel panel is excellent in water resistance and chemical resistance, making it hygienic. ◎ For more details, please contact us.

• Sensors
• switch
• Sensors

The "foot switch" can be operated at your feet to open and close automatic doors. It is widely used as a sensor in operating rooms because it allows both hands to be free. Even with large surgical sandals, the "PF-01S" with a wide opening can open and close automatic doors. It reduces the risk of virus and bacterial infections in places like hospitals and medical facilities where hygiene is a concern. 【Features】 ○ Reduces the risk of viral infections as doors can be opened and closed without touching them ○ Allows both hands to be free as it can be operated at your feet ○ Suitable for places like hospitals and medical facilities where hygiene is a priority ○ Prevents unnecessary detection due to its switch mechanism ◎ For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

The "hand wave sensor" allows you to open and close doors simply by waving your hand, making it hygienic! This non-touch sensor enables you to wave your hand without touching the main unit, which is important in places where hygiene is a priority. Unlike regular touch switches, there is no worry about battery depletion. By adjusting the sensitivity, you can fine-tune the detection range to suit the environment. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, medical facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection as doors can be opened and closed without contact ○ A wide variety of options to choose from based on application and location ○ Suitable for places where hygiene is a priority, such as food factories and medical facilities ○ Switch mechanism prevents unnecessary detection 【Recommended for the following locations】 - Factory facilities: Used in food processing factories' ingredient storage rooms - Dining facilities: Used in kitchens of hotels and restaurants - Care facilities and medical institutions: Used in automatic doors of care facilities, operating rooms in hospitals and medical institutions - Environmental facilities: Used in clean rooms of environmental facilities ◎ For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching doorknobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infection in places where hygiene is a concern, such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism ◎ For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria infection. The "PF-R1" is an exposed front-facing type hand-sensing sensor. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Sensors
• Safety switch
• Safety Door Switch

You can open and close doors without directly touching doorknobs or switches, reducing the risk of viral infections in places where hygiene is a concern, such as food processing facilities and hospitals. The "PF-U2" is an exposed type horizontal hand-sensing sensor. For more details, please contact us.

• Sensors
• Safety Door Switch
• Safety switch

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria transmission. The "PF-R4" is an easy-to-use exposed downward wide-type hand-sensing sensor. By placing your hand under the sensor, you can open and close the door. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Sensors
• Safety Door Switch
• Safety switch

The "Exposed Waterproof Non-Contact Beam Switch for Automatic Doors PF-R5" is a hand-sensor that allows for easy adjustment of fine angle settings, and opens and closes the door when the beam of the built-in beam switch is blocked. It is suitable for hygienic environments such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact - Three patterns of beam switches: front, downward, and left/right - Waterproof and dustproof (IP55 design) - Arrow mark indicates where to wave your hand - Can be mounted on a power switch box For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

From lightweight doors to large commercial facilities and office buildings. This automatic door sensor maintains a stable high-density area even with tall doors, ensuring safety while achieving an ideal entrance with a sense of openness. It is available in various types: surface-mounted, built-in, bottom-mounted, and ceiling-mounted. It also features doorway monitoring capabilities, making it suitable for entrances to industrial facilities. Additionally, it allows for adjustments in width and depth by one row each, enabling precise detection ranges tailored to the site while maintaining high density. For more details, please contact us or download the catalog.

• Sensors
• switch
• Sensors

The bed exit sensor/movement call "Ugo-kun" is also useful for preventing falls in the restroom. When a patient stands up from the toilet seat, the plate detaches from the main unit, and a nurse call is triggered. This movement call product offers excellent cost performance; when not in use, turning the switch OFF will prevent the call from being activated even if the plate is detached. It is compact and easy to install. We have changed the design from the traditional box shape to a pastel pink, round egg shape. The plate has also been changed from black to white, with added thickness to allow for a customizable feel! Please note that there are no changes to the model number, functions, or price due to this design change. For more details, please contact us or download the catalog.

• Safety Sensors

The bed exit sensor/movement call "Ugo-kun" notifies the nurse when the patient's upper body rises from the bed, causing the plate to detach from the main unit. It is a cost-effective movement call product that does not trigger a call when the switch is turned OFF, even if the plate is removed. It is compact and easy to install. For more details, please contact us or download the catalog.

• Safety Sensors

The "Just Place It Pole-kun" is an infrared reflection type off-bed sensor that can adapt to various environments. It detects when a person stands up from the toilet, helping to prevent falls in the restroom. Because it is wireless, it reduces the risk of cable disconnection and leaving the detection range. It is also less likely to detect curtain movements or bedding overhangs, thereby minimizing false alarms. 【Mat Sensor】 The risk of falling actually increases because the user may try to avoid it. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is not visible and is less likely to be noticed by the user. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the top of the pole ■ Simple design with only two switches ■ The sensor is wireless, making it non-contact and hygienic ■ The operation and base parts are at a height that is less likely to get dirty and are antibacterial ■ False alarm reduction feature (less likely to detect curtain movements or bedding overhangs) *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety Sensors

The "Just Place Pole-kun" is a bed-exit sensor that can detect not only when a patient leaves the bed but also when they leave the room by being installed at the entrance of the hospital room. When installed at the entrance, it detects the timing of the patient leaving the room and notifies via the nurse call system. Since it is wireless, it reduces the risk of cable disconnection and leaving the detection range. It is also less likely to detect curtain movement or bedding overhang, thereby minimizing false alarms. 【Matt Sensor】 The risk of falling actually increases because the patient may try to avoid it. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the patient. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the top of the pole ■ Simple design with only two switches ■ The sensor is wireless, making it non-contact and hygienic ■ The operation part is at a height that is less likely to get dirty, and the base is antibacterial ■ False alarm reduction feature (less likely to detect curtain movement or bedding overhang) *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety Sensors

The "Just Place It Pole-kun" is a suitable bed-exit sensor for preventing falls and accidents in hospitals and nursing facilities. It allows for flexible installation according to the layout of the room and the timing of detection. By using Just Place It Pole-kun, we have received feedback that the risk of tripping over or avoiding mat sensors has decreased. Since it is wireless, the risk of cable disconnection and exiting the detection range is also reduced. 【Mat Sensor】 The risk of falling may actually increase because the user tries to avoid it. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - It uses infrared, making it less noticeable to the user. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the top of the pole. ■ Simple design with only two switches. ■ The sensor is wireless, ensuring non-contact and hygienic use. ■ The operation and base parts are antimicrobial and designed to be less prone to dirt. ■ False alarm reduction feature (less likely to detect curtain movement or bedding overflow). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety Sensors

The 'Just Place It Pole-kun' is an infrared reflection-type bed exit sensor that can adapt to various environments. When the user gets out of bed, it notifies via a nurse call. Because it is wireless, it reduces the risk of cable disconnection and exiting the detection range. It is also less likely to detect curtain movements or bedding overflow, minimizing false alarms. 【Mat Sensor】 The risk of falls may actually increase as users try to avoid it. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the user. - Installation is complete just by placing it! It has a simple design with only two operation switches. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety Sensors