ホシモト List of Products and Services

Dimensions and load data for selecting eye bolts.

• bolt
• Other machine elements
• Board materials

Pipe Handle K-90 Series (All 6 Sizes) Material: ● Pipe Section / Aluminum ● Bracket Section / Polyamide (PA-GF30) Color: ● Bracket Section / Black Usage: Various equipment and facilities Remarks: If you require a middle support, please specify separately. (Part Number: K-80M) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt
• Board materials

【Features】 ■ It is a popular round base seat type. ■ It has a manual handle that opens and closes by turning a lever. ■ It is waterproof. ■ You can choose between keyed and keyless options based on usage conditions.

• Other machine elements
• Other Boxes
• Board materials

【Features】 ■ It is a manual lever lift handle. ■ It is waterproof. ■ You can choose between keyed and keyless options based on your usage situation.

• Board materials
• Other machine elements
• Other FA equipment

Hoshimoto's engineers have compiled and published their knowledge on selecting industrial accessories and parts for panels, enclosures, and panels in the "Technical Handbook for Selecting Accessories and Parts for Enclosures and Panels." From the perspective of manufacturers producing accessories and parts for distribution boards, control panels, sub-distribution boards, and enclosures, we have included over 70 examples of cost reduction and quality improvement points. This specialized selection technical book is currently available for free! (70 pages in full color) It is a technical handbook for designers aimed at achieving cost reduction for mechanical components of panels and enclosures, covering selection methods for main mechanical parts such as handles, hinges, bosses, busbars, and supports, as well as environmental considerations, international standards, space-saving design, durability, waterproofing, corrosion resistance, safety, and dust resistance. *Please note that only a digest version (25 pages) is available for download. If you would like to receive the full handbook, please contact us using the "Contact Form" below. We also welcome requests for the "Latest Comprehensive Catalog" and "Customization Guide" during this opportunity.

• Control Panel
• Board materials
• Other machine elements

Published in May 2016. This is the latest catalog covering all of Hoshimoto's handle products. It is a compact booklet with 60 pages, making it convenient to carry. [Contents] ● Anti-horizontal swing handle ● L-shaped handle ● Flat handle ● Round and small lock handle ● Coin lock If you would like the "Comprehensive Catalog Vol. 13-2" that includes all products, please contact us through the "Contact Form."

• Board materials
• Other machine elements
• Other Boxes

Hoshimoto, a comprehensive parts manufacturer for panels and enclosures, has published the "Industrial Accessories and Parts Comprehensive Catalog for Panels, Enclosures, and Panels," which summarizes applications and features from the designer's perspective in an easy-to-understand manner. Having this single volume will be extremely helpful in the parts selection process when designing machines and equipment! It includes essential accessories and parts for panels and enclosures, such as handles, locks, grips, hinges, rod bars, eye bolts, gaskets, and copper busbars, all presented in full color across more than 300 pages. We are currently offering this comprehensive catalog for free, which every designer should have! If you are having trouble selecting accessories and parts like handles and hinges for panels and enclosures, please take this opportunity to request the materials. *The download only includes the catalog table of contents. If you would like a physical booklet, please apply through the "Contact Form" below. We will send the catalog to the address registered with Ipros.

• Control Panel
• Board materials
• Other machine elements

- Ambidextrous design (to switch sides, flip the stop pin and adjustment washer) - The ribs, packing, etc. on the back of the main body are designed for waterproof use. - There are three types of surface treatments: satellite chrome plating, chrome plating, and black coating. Please specify your choice when placing an order. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other process controls
• Board materials

The lever is lifted with a reliable button push operation. It features a dual-use design (to switch sides, please flip the stop pin and adjustment washer). *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements
• Board materials
• Other FA equipment

The ribs and packing on the back of the main body are designed for waterproofing. It features a reversible design for both left and right sides (to switch sides, simply flip the stop pin and adjustment washer). *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other machine elements
• Other FA equipment

A slim type with a depth of 13.5mm from the mounting surface to the stop pin. Waterproof design with ribs and gaskets on the back of the main unit. Designed for both left and right use. *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other machine elements
• Cabinets and Boxes

Reliable waterproof mechanism (using O-rings and waterproof packing). Ambidextrous design. Material: Zinc alloy (ZDC) Surface treatment: Chrome plating *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other Boxes
• Board materials

● We offer three types based on mounting hole dimensions, available with and without a cylinder. ● Designed for both left and right use (to change sides, please flip the stop pin). ● Mounting hardware is included, making installation easy and convenient. * For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Board materials
• Cabinets and Boxes

<KP-37-2/KP-37-3> Material: PC/ABS Alloy (Equivalent to UL94 V-0) Load Capacity: 245N (25kgf) Standard Color: Black Applications: Various devices, equipment, etc. Remarks: Please use at room temperature. <K-38> Material: Resin Nylon Color: Black, White Applications: Various devices, equipment, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt
• Board materials

<K-39> Material: Zinc alloy Surface treatment: Chrome plating Application: Measuring instruments, equipment, etc. <KP-39> Material: ●PC/ABS alloy (equivalent to UL94 V-0) ●Insert part / Brass Application: Various devices, equipment, etc. ○Mounting screws use insert fittings (made of brass) to enhance strength. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt
• Board materials

Material: Iron (SS) Surface Treatment: Trivalent Chromate Plating Remarks: EKZ / Insulation Tube Included (Material: Polyolefin) Application: Measuring Instruments, Equipment, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt
• Board materials

- Excellent weather resistance, oil resistance, and flame retardancy, suitable for various applications. - Rubber sponge made of independent bubbles using chloroprene rubber (water absorption rate of 5% or less). - Available in lengths from 1m to 100m. Please specify whether you need it with or without adhesive tape. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements
• Board materials
• Cabinets and Boxes

<Stud Bolt> Material: ●B-/Steel ●SB-/Stainless Steel Surface Treatment: B-/Copper Plating Available in various sizes. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• bolt
• Board materials

Material: ● BN/Iron (SS) ● SBN/Stainless Steel (SUS304) Surface Treatment: ● BN-/Copper Plating Custom sizes available upon request. *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements
• Board materials

<I-Bolt> Material: ●CB-/Iron (SS) ●SCB-/Stainless Steel (SUS) Surface Treatment: ●CB-/Trivalent Chromate Coating <I-Nut> Material: ●CN-/Iron (SS) ●SCN-/Stainless Steel (SUS) Surface Treatment: ●CN-/Trivalent Chromate Coating Application: Distribution boards, sub-distribution boards, control panels, machine tools, various enclosures Remarks: Also compatible with hexavalent chromate and raw materials We offer a wide variety of standard sizes and long neck sizes. *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• Other machine elements
• Board materials

<H-10 Series> Material: Iron (SS) <SH-10 Series> Material: Stainless Steel (SUS304) Applications: Distribution boards, sub-distribution boards, control panels, measuring instruments *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Board materials
• nut

We offer a variety of sizes for earth terminals. ● Material: Main body / Iron, Connection part / Copper ● Surface treatment: Copper plating ● Applications: Distribution boards, sub-distribution boards, and various other boxes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other FA equipment
• Board materials

Material: Stainless Steel (SUS316) Surface Treatment: Mirror Polished Application: Refrigerated and Freezer Doors Notes: Please check the actual product for installation (tightening amount). *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other machine elements
• Contract manufacturing

● Uses durable glass fiber reinforced resin. ● The packing on the back of the main body is embedded, providing a highly adhesive waterproof design. ● Equipped with an indicator function that clearly shows the open/close status. *For more details, please refer to the PDF document or feel free to contact us.*

• Board materials
• Other machine elements
• Cabinets and Boxes

- Insertion and removal are only possible when locked. - The distance to the stop pin can be adjusted by rearranging the adjustment washer. - Waterproof standard equivalent to IPX6. Material: Zinc alloy (ZDC) Surface treatment: Two types - satin chrome plating and chrome plating Applications: Distribution boards, sub-distribution boards, control panels, various enclosures Remarks: A stop pin is included. *Applicable key numbers: No. 075-1 and No. 075-2 *For more details, please refer to the PDF document or feel free to contact us.

• Board materials
• Other machine elements
• Other FA equipment

■These are some standard and OEM products manufactured using our company's casting machines. ■We can accommodate a variety of products with short delivery times. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements
• Board materials
• Contract manufacturing

Devices installed on vessels with vibrations, such as panels, may pose a risk of the panel doors opening at unintended times due to continuous vibrations affecting the movement of the handle lever, as well as lateral winds when transporting the panel on trucks. To prevent these issues, in addition to locking with a cylinder lock, it is effective to add a vibration prevention feature using a trigger-type fitting combined with the base section. With this fitting, the handle can be secured, preventing the risk of the panel door opening naturally. 【Features】 ■ Prevents natural rotation of the panel handle without locking ■ Allows smooth opening and closing of the panel door while ensuring safety *For more details, please refer to the catalog or feel free to contact us.

• Board materials
• Other machine elements
• Other machine elements

The conventional resin handles for panels have excellent corrosion resistance compared to zinc alloy handles, but due to the properties of the material, they have weaknesses in strength and weather resistance, making it difficult to use them in outdoor panels and similar applications. However, by applying ABS resin molding to zinc alloy, we can improve issues related to damage from external impacts and deformation due to climate. They also have excellent corrosion resistance, making them suitable for coastal areas and environments where some corrosive gases are present. 【Features】 ■ Improves issues related to damage from impacts and deformation due to climate ■ Usable in coastal areas and environments where corrosive gases are present ■ Excellent maintainability, contributing to cost reduction *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

When installing handles on control panels or distribution boards, there may be cases where it is necessary to secure both the front and back sides, or where two people must work together due to the size of the door. In such cases, adopting a hook-shaped waterproof packing for the panel handle and temporarily securing it in the mounting hole is effective. By only holding the waterproof packing and the back side of the handle fixture during the installation work, the handle can be secured, allowing one worker to efficiently carry out the installation. 【Features】 ■ Reduction in processing man-hours ■ Design that keeps total costs down *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

When attaching the handle to the panel door, if the stop pin and washer cannot be set properly, it is necessary to remove it from the panel door and bend the stop pin to align the position, which increases the work hours. By increasing the number of washers or changing the thickness of the washers, we can increase the variations in position up to the stop pin, thereby eliminating the need for bending the stop pin. 【Features】 ■ Increasing the number of washers increases the patterns of positions up to the stop pin ■ Fine adjustments can be made without bending the stop pin *For more details, please refer to the catalog. Feel free to contact us as well.

• Board materials
• Other machine elements
• Other machine elements

The flat handle opens simply by pressing a button, a common opening and closing mechanism seen in doors for distribution boards. However, there can be instances of "binding" between the lever and the latch, and the shape of the sliding parts involved in the linkage is also complex. The swing handle, which rotates after manually lifting the lever, directly links to the rotation of the latch, preventing any occurrence of "binding." For the linkage, the lever (rotating shaft) and the latch are assembled using □ axis and □ hole, so a complex shape is not necessary. It is suitable for use in enclosures and panels that require airtightness in environments where oil mist or water droplets may be present. 【Features】 ■ Prevents the occurrence of binding by adopting a swing handle ■ No complex shapes required ■ Ideal for panels and enclosures that require airtightness *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

When installing a flat handle that requires fastening parts (washer and screws) to a door, small parts are often involved, making them easy to lose during installation. The selected parts can significantly affect the amount of work required. By using a mounting plate (one piece) instead of the conventional two washers, you can prevent loss during installation when attaching the handle to the door. Additionally, since screws can be temporarily fixed to the handle while attaching it to the door, it is also possible to reduce assembly work time. 【Features】 ■ Integration of multiple parts ■ Simplification of panel assembly and installation work ■ Improved workability ■ In some cases, simplification of the shape of the door mounting holes is possible *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The panels with important operational functions located within the factory, various facilities, and equipment need to have their doors opened immediately for response and action during emergencies or urgent situations. By coloring the buttons on the panel handles, instant identification is possible. This allows for immediate response to emergencies that may occur within the factory or various facilities. 【Features】 ■ Immediate identification of handle buttons ■ Quick response to emergencies is possible *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The handle's grip area may be slippery due to the presence of straight sections, depending on how it is held and the environment. Additionally, the angular shape can feel uncomfortable in the hand when gripped. A handle designed to eliminate straight lines and flat surfaces as much as possible incorporates many curves and rounded shapes, making it comfortable to hold regardless of grip style or environment. The "waist" in the center of the handle fits the hand well and is effective for lever operation in environments where oil mist is present. 【Features】 ■ Eliminates straight lines and flat surfaces as much as possible ■ Incorporates many curves and rounded shapes for ease of grip ■ Effective in environments where oil mist is present *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The cutout holes on the main body of the panel or the door side of the metal enclosure where the handle is mounted need to be made according to the shape, mounting method, and size of the handle. If the cutout holes are complex, high processing accuracy is required to maintain waterproofness. By choosing a rectangular cutout hole for the handle, the cutout hole on the door can be limited to size differences only, making processing easier, and it is also simple to maintain waterproofness. 【Features】 ■ Easy processing with rectangular cutout holes ■ Contributes to work efficiency *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

A structure is needed to mechanically transmit the action of "pressing a button" to the action of "lifting a lever" in the button type. Additionally, in the manual type, it is necessary to "hook the end of the lever with a finger" to lift the lever, which requires "space (height) for the finger to rest." In the former case, there are many parts, and in the latter case, there is a protrusion from the door surface. Therefore, by simplifying the structure for lifting the lever and eliminating shapes that are easy to hook, we solve both problems simultaneously. We have reduced the weight of the handle and minimized the protrusion from the door surface, except for the protrusion of the convex part at the head of the lever. 【Features】 ■ A clean and simple design ■ A flat design that minimizes protrusion from the door ■ Reduced number of parts and lightweight handle *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The handle that locks with a double-pronged key has a simple structure, allowing for easy locking and unlocking operations even without a dedicated double-pronged key. By using a tumbler-type cylinder for the locking mechanism, the structure becomes more complex, enabling locking and unlocking operations with only a standard key (200 series key). Increasing the number of tumblers can also help prevent tampering, such as picking. 【Features】 ■ Complex structure of the locking mechanism with a tumbler-type cylinder ■ Locking/unlocking possible with standard key only ■ Capable of preventing tampering such as picking *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

As a representative example of metal surface treatment for handles used in enclosures and panels, chrome plating is widely used; however, the high reflectivity caused by sunlight outdoors and lighting indoors (light reflectivity) is a problem. By adopting satinated chrome plating, anti-glare effects can be achieved. The surface coating of enclosures is generally applied for corrosion resistance, but the use of painted handles also contributes to aesthetic appeal. 【Features】 ■ Different surface treatments are used according to the installation environment of the enclosure ■ Satin chrome plating provides anti-glare effects ■ Painted handles are optimal for aesthetic appeal *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The handle mounted on the metal casing generally requires a lot of simultaneous work when installed by one person, resulting in longer installation times. By using a dimpled hole shape for the mounting plate, it is possible to install the handle while the screws are already set on the handle side. By hooking the mounting plate onto the screw part, there is no need to hold the handle from the front side, allowing for installation while only holding it from the back side. 【Features】 ■ Changed the screw holes of the mounting plate to a dimpled hole shape ■ Allows for handle installation with screws already set ■ Improved workability for handle installation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The widely adopted industry standard 200 key offers benefits in terms of security management by reducing the hassle of managing multiple different types of keys. However, it is not suitable for individual management from a security perspective. The industry standard 200 key has a unified standard, but in cases where compatibility is not required for the housing, using unique individual standard keys such as the SC2000 key can enhance security effectiveness. 【Features】 ■ Improved security with unique individual standard keys ■ Loss of compatibility with other keys *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The handle to be mounted on the metal enclosure is selected based on the size that matches the metal enclosure and the required functions. In particular, when selecting a handle for the inner door, it is necessary to prevent contact with the outer door. For the inner door of a double door, selecting a handle with minimal projection from the door allows for design without worrying about gaps with the outer door. Additionally, by locking the outer door, it is possible to choose a type of handle for the inner door that does not require a key, further contributing to cost reduction. [Features] - A handle with minimal projection is optimal for the inner door of a double door. - Design can be done without worrying about gaps with the outer door. - The projection of the enclosure itself can also be minimized. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

Handles used for metal cabinets are generally made of zinc alloy, but in salt damage areas, corrosion due to rust may occur, so it is necessary to select handles that are excellent in salt resistance. For handles used on metal cabinets installed in salt damage areas, stainless steel, which has excellent corrosion resistance, is the most suitable material. 【Features】 ■ Stainless steel handles reduce corrosion in salt damage areas ■ Also possesses fire resistance, maintaining functionality even in harsh environments *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

A metal cabinet with double-opening doors (also known as "Kannon doors") requires two handles on each side. This increases costs, and it is necessary to lock the handles on both sides when in use. By making one of the two handles keyless, the door will not open if only one side is locked. This simplifies the work since only one side needs to be locked. 【Features】 - Contributes to cost reduction by making one of the two handles keyless. - Improves work efficiency as only one side needs to be unlocked. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

When installing a handle on a distribution board or sub-distribution board and performing door opening and closing operations, forcing the handle to turn in the wrong direction can lead to damage to the handle and the door itself. A sticker indicating the direction of rotation will be placed on the handle or door side to raise awareness. This allows the operator to perform the task without making mistakes regarding the rotation direction. 【Features】 ■ Simply apply a sticker indicating the rotation direction ■ Prevents damage to the door side *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements

The key for the handles installed on distribution boards and sub-distribution boards is mainly the 200 series key, which offers convenience but also raises security concerns. The same applies to L-shaped handles where the key section is covered by a lid. By adopting trigger-type or handle cover-type designs, the use of simple padlocks becomes possible. This enhances security with a double lock mechanism. 【Features】 ■ Adopts a double lock mechanism ■ Improves security ■ Easy to confirm the locked state with the use of a padlock *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Board materials
• Other machine elements
• Other machine elements