理研計器奈良製作所 List of Products and Services

The "NEW SELBER VL Series" is a graphic load monitor that allows you to visually confirm the load during the pressing process, as well as record and monitor it. By checking the load during the processing stage in waveform, the load conditions of the press machine and mold become immediately clear. By measuring the load values, it becomes possible to understand the load center, eccentric loads, etc., enabling effective maintenance management of the press. 【Features】 ■ Two types of monitoring channels: 2CH/4CH specifications ■ Compatible with low-speed to high-speed presses ■ Monitoring modes include peak value monitoring and waveform monitoring ■ Data recording via USB memory, supporting up to 32GB ■ Monitoring methods (reference value monitoring/previous value monitoring) *For more details, please refer to the catalog or feel free to contact us.

• Other inspection equipment and devices

The press load monitoring monitor "SELBER VL" is a graphic load monitor that allows you to check and record the load conditions on the press machine/die during press processing in waveform. 【Features】 ◆ Capable of monitoring the load of press machines ◆ Remote monitoring via Bluetooth communication ◆ Waveform monitoring prevents punch nibbling due to double strikes or eccentric loads on the die 【For more details, please download the catalog or feel free to contact us】

• Other processing machines

The automatic press monitoring monitor "SELBER RB・RX" prevents product dents, defects, and mold damage caused by leftover scraps during progressive press processing. By using ultra-small sensors near the workpiece inside the mold, it has become possible to detect minute scraps near the workpiece, which was previously difficult. 【Features】 ◆ Equipped with first bounce detection function ◆ Analog output function included ◆ Expandable up to 8 channels ◆ Compatible with ultra-small sensors measuring W20×D5.5×H4.7 ◆ High-precision detection with a resolution of 0.1μm or higher 【For more details, please download the catalog or feel free to contact us】 　　　　　↓　↓　↓　　　　　　　　　　　　↓　↓　↓

• Other processing machines

The automatic press monitoring monitor "SELBER RB・RX" prevents product dents, defects, and mold damage caused by leftover scraps during progressive press processing. By using ultra-small sensors, it has become possible to accurately detect scraps near the workpiece, which was previously difficult. 【Features】 ◆ Equipped with first bounce detection function ◆ Analog output function included ◆ Expandable up to 8 channels ◆ Compatible with ultra-small sensors measuring W20×D5.5×H4.7 ◆ High-precision detection with a resolution of 0.1μm or higher 【For more details, please download the catalog or feel free to contact us】 　　　　　↓　↓　↓　　　　　　　　　　　　↓　↓　↓

• Other processing machines

RM-7302 (2-channel specification) RM-7304 (4-channel specification) You can observe the time changes of the bottom dead center with a color graphic display. Continuous recording of bottom dead center data is possible with a USB flash memory. Great for traceability! Introducing the Bottom Dead Center Absolute Value Monitoring Unit NEW SELBER VX RM-7302 / RM-7304 from RIKEN KEIKI Nara Manufacturing. ■□■ Features ■□■ - Two models available: 2CH specification and 4CH specification. - Maximum rotation speed can support up to 4500 SPM. - Monitoring modes include bottom dead center mode, 1st (first bounce), and external timing mode. (* Mode selection is possible for each channel individually) - Resolution of 0.1µm (domestic specification) * 0.5µm (overseas specification) - Compatible with all sensor types! Our company supports all sensors. - The LCD display features an impressive 7.5 inches. - Data recording via USB memory is possible up to a maximum of 32GB. - Selection of monitoring methods is available (reference value monitoring / previous value monitoring). For other functions and details, please download the catalog or contact us.

• Other processing machines

The header monitoring device "NEW SELBER 77 RM-2804" detects abnormalities such as punch breakage, double strikes, chuck errors, and dimensional deviations, protecting the machine. It allows for simultaneous monitoring using both the previous comparison method and the reference value method, enabling high-speed detection at 1500 strokes per minute, as well as the detection of forward points, reverse points, and lateral deviations. Additionally, it features an easy-to-read digital setting and digital display, making operation simple. For more details, please download the catalog.

• Other measurement, recording and measuring instruments
• Other process controls

The box exchange machine "RBOX-100" automatically exchanges heavy boxes filled with parts while counting the parts, reducing the burden on operators. In the event of an abnormal stop, it outputs a stop signal to the machine side as well. It is equipped with an automatic origin return function that returns the cylinder to its origin. For more details, please download the catalog.

• Other measurement, recording and measuring instruments
• Other conveying machines

The defect detection device "RM-2703" can detect material shortages, contact issues, and discharge during automatic pressing, preventing the occurrence of defective products in advance. It is capable of handling high-speed presses up to 2500 min-1 (spm). For more details, please download the catalog.

• Other process controls
• Other measurement, recording and measuring instruments

Various measurements can be made, and a variety of modes are available. Introducing the dynamic displacement data collection system NEWSELBER III RM-3000 from RIKEN Keiki Nara Manufacturing. ■□■Features■□■ 1. Capable of measuring the temporal changes of the bottom dead center or the first bounce point for each shot. 2. Continuous measurement (observation) of the bottom dead center displacement waveform for each shot is possible. 3. Can be used like a digital recorder. ■Easy Data Conversion Data measured in "2." above can be represented in three dimensions. It is possible to process measurement data using other spreadsheet applications. For other functions and details, please download the catalog or contact us.

• Other processing machines

Viewing and monitoring: the emergence of visual monitoring displays. Recording: continuous recording of bottom dead center data, greatly contributing to traceability. Introducing the Bottom Dead Center Absolute Value Monitoring Unit NEW SELBER GX RM-7201 from RIKEN KEIKI Nara Manufacturing. ■□■Features■□■ ~Viewing and Monitoring~ ■Waveforms are visible - Numerical values can be captured visually rather than just displayed digitally. - Time-based changes can be quickly confirmed at a glance, allowing for rapid response in case of abnormalities. ■Two graph modes - Bottom Dead Center Mode B.D.C mode Displays each shot's data continuously in digital values and plots, monitoring upper and lower limits. - Waveform Mode WAVE mode ~Recording~ ■Connects to a computer - Bottom dead center values can be accumulated as continuous data and extracted externally. - Data recording can be done using commercially available USB flash memory. - Easily create visual reports by importing into spreadsheet software. For more features and details, please download the catalog or contact us.

• Other processing machines

Achieving compactness and low cost! Introducing the automatic press bottom dead center monitoring monitor NEW SELBERBX RM-2402 from RIKEN Keiki Nara Manufacturing. ■□■Features■□■ ■Compatible with a press stroke length of 4mm ■Equipped with sensor correction function, compatible with our similar sensors ■Approximately half the size of conventional models (MB, MX×2) ■High precision detection possible, resolution of 0.5μm ■Equipped with first bounce detection function (first bounce auto search function) ・Brightness of the display increased to about four times that of conventional models, making it easy to see from a distance ・Display blinks during errors, allowing easy confirmation of abnormalities from a distance For other functions and details, please download the catalog or contact us.

• Other processing machines

Industry's first! Ultra-small sensor. Introducing the automatic press monitoring monitor NEW SELBER RB・RX from RIKEN KEIKI Nara Manufacturing Division. ■□■Features■□■ ■Equipped with first bounce detection function (first bounce auto search function) ■Analog output function included (confirmation of stripper plate waveform and detection timing position) ■Expandable up to 8 channels (RX unit) ■Compatible with ultra-small sensors (W20×D5.5×H4.7) ■High-precision detection possible, resolution of 0.1μm (settings possible up to 99.9μm) For other functions and details, please download the catalog or contact us.

• Other processing machines

Low cost, compatible with sensors, and no hassle of replacement. Introducing the NEW SELBER V automatic press machine scrap detection device from RIKEN KEIKI Nara Manufacturing. ■□■Features■□■ ■Previous value comparison ■Automatic timing When the target object approaches the sensor within a certain distance, timing is automatically activated, and monitoring of the bottom dead center is performed. No timing sensor is required. ■Large digital display The adoption of a large digital display for monitoring values and deviations has significantly improved visibility. ■Key switch adopted ■Improved monitoring accuracy ■Sensor disconnection detection Sensor disconnection detection is now possible. ■Cycle monitoring ■Operating rotation speed For other functions and details, please download the catalog or contact us.

• Other processing machines