レヨーン工業 List of Products and Services

Due to its non-contact nature, the impact on the product is minimal, and simultaneous cleaning of both sides is possible. It is also ideal for cleaning foreign substances in uneven areas, and because it requires few consumables, there is no need for costly infrastructure development.

• Other electronic parts

The "RPLU-100A series" is an atmospheric pressure plasma cleaner that achieves high-quality surface treatment while keeping initial costs low, enabling increased productivity. No wet cleaning is required. It removes fine dirt from the work surface and forms hydrophilic functional groups on the surface. It is available in both "rotating head" and "non-rotating" models, making it very effective for applications where adhesion has been difficult due to strength issues, or when a little more peel strength is desired. 【Features】 ■ Removes fine dirt from the work surface ■ Forms hydrophilic functional groups on the surface ■ No wet cleaning required ■ Surface treatment possible in a dry environment ■ Improves hydrophilicity (wetting properties) ■ Increases adhesion and bonding capabilities *For more details, please refer to the PDF document or feel free to contact us.

• Plasma surface treatment equipment
• Other surface treatment equipment

This series is the basic model of dust removal devices used in various processes. Available in configurations from 2 to 5 units, suitable for both inline and outline applications. We offer the "RY-705B," which employs a non-contact magnetic gear for the drive gear, and the "RY-505Z," a two-unit clean roller type with cleaning on both the upper and lower sides. 【Features】 ■ Clean Roller RY-705B - Uses a non-contact magnetic gear for the drive gear - A revolutionary clean roller that eliminates dust generation from within the device ■ Clean Roller RY-505Z - Arranges two clean rolls on both the upper and lower sides to double the dust removal effect - Ideal for surface dust removal of products before the lamination process or exposure process in automatic lines *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• roller

We would like to introduce our "Thin Plate Compatible Clean Roller." The "RY-1106 Series" utilizes a new type of clean roll with a small diameter, making it possible to remove dust from thin plates and films. Additionally, by adopting a magnetic gear in the drive section of the device, we suppress minute dust generation from the gear area. We also offer the "RFC-705A" and "RF-705A." 【Features】 ■ Prevents dropping ■ Clean roll that prevents entanglement ■ Uses magnetic gear in the drive section ■ Capable of cleaning 50μm workpieces *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• roller

At Rayon Industrial, we propose customized unit rollers tailored to our customers' needs. We accommodate various specifications for roll-to-roll lines and vertical path lines, as well as designs for fixed installation units in line equipment. Our solutions are optimal for dust removal from films, substrates, and glass plates. 【Features】 ■ Manufactured fully to order based on customer requirements. ■ Capable of accommodating various requests for installation and mounting in existing lines and equipment. ■ We can produce unit rollers up to 2,600mm based on our track record. ■ Also suitable for long products in raw material processes and slitting processes. ■ Enhanced structural integrity increases adhesion to products, allowing for high-speed flow rates of up to 250m/min.

• roller

The "RD Series" adopts a dry air cleaning method, allowing for non-contact dust removal without touching the product. We cater to various customer needs for sheet products and roll-to-roll lines. It enables cleaning of delicate materials that should not be touched and uneven surfaces that are difficult to clean with contact methods, minimizing the impact on the product due to its non-contact nature. 【Features】 ■ The cleaner head discharges compressed air to remove fine dust particles. ■ As it uses a dry cleaning method, there is no need for water or chemical solution replacement or costly infrastructure development. ■ The main consumable is the filter, achieving low running costs. ■ Equipment is designed and manufactured to match the customer's product size. ■ We can also accommodate long or high-speed specifications based on customer requests. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

The "SKF Series" is a wiping cleaner that achieves the removal of stubborn foreign substances such as grease, oil, ink, glue, and viscous contaminants that have been considered difficult to eliminate from work surfaces. It cleans by pressing the cleaning product against the cleaning wiper and wiping it off. It can roll up the dirty wiper at any desired timing and length. More detailed customization is possible to meet customer requests. 【Features】 ■ Cleans the product surface by moving the product ■ Designs and manufactures equipment tailored to the customer's work size ■ More detailed customization is possible to meet customer requests ■ Soaks non-woven fabric with cleaning solution and wipes off adhered foreign substances from the work surface by moving the suction table on which the work is placed *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

The "RJ Series" is a device designed for cleaning the product surface before component mounting in the implementation process and for dust removal after laser marking. We offer the dual-sided cleaning type clean roller "RJ-1136," the top-side cleaning type dual clean roller "RJ-1133C," and the brush-equipped model for mounting "RJB-1133C." 【Features of RJ-1136】 ■ Dual-sided cleaning type dual clean roller ■ Capable of cleaning both sides, one side before mounting, and one side after mounting ■ Size: W400×D828×H1,740±50mm (including the patrol light of 410mm) ■ Weight: 80kg *For more details, please refer to the PDF document or feel free to contact us.

• roller

The "RYT-505A" is a space-saving vertical clean roller designed specifically for outlines, born from a completely different concept than conventional models. By passing the work vertically back and forth, it enables dust removal that exceeds the number of clean rolls equipped. Additionally, it has been made more compact than previous models. 【Features】 ■ Adhesive tape cutting can be performed by pulling out the unit ■ After loading the substrate from the top, cleaning is executed ■ Can be installed in a space-saving manner ■ Usable in limited spaces such as AOI processes and manual printing processes ■ Rich in features *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• roller

The "RM-8" is a device that cleans the surface and holes of printed circuit boards using high-pressure air and a brush in combination. Weighing 200 kg, its dimensions are W1,280 × D1,320 × H1,070 mm. It also features low noise (below 70 dB) and excellent energy efficiency. 【Specifications】 ■ Board size: 50 × 50 to 660 × 750 mm ■ Board thickness: 0.08 to 5.0 mm ■ Cleaning surface: Both sides ■ Cleaning method: - High-pressure air cleaning using a high-efficiency air nozzle - Surface cleaning with a rotating brush ■ Dust collection method: Low-noise blower dust collection through simple sealing of the cleaning area *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner
• Other cleaning machines

The "RE Series" is a groundbreaking device that enables dust removal from the edges of circuit boards, which was previously impossible. By using it in conjunction with a clean roller, it allows for cleaning of the entire surface of the circuit board. As a fully customized product, we design and manufacture devices tailored to your work size. 【Features】 ■ Allows for more detailed customization unique to fully ordered products ■ The structure allows for roll adjustments in increments of 0.01mm, resulting in longer roll lifespan and maximum utilization of roll width ■ After workpiece insertion, edge cleaning can be performed in approximately 30 seconds ■ Enables quick cleaning of workpiece edges ■ Can also be used inline *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• roller

The RYS series features clean rolls and adhesive tape, yet is compact! It is a tabletop type clean roller suitable for small-sized target products. 〇 Double Clean Roll Adoption Despite its space-saving design, it employs a double clean roll structure to ensure effective dust removal. 〇 Safety Design Equipped with interlocks at various points, it has a safety design that prevents operation when released.

• Other cleaning machines
• roller

The product is a hot clean roller that allows for cleaning while maintaining the temperature of the substrate surface, such as in the pre-lamination process. It can be installed in a space-saving manner and provides stable heat retention with a full cover. The heater operation can be controlled via the touch panel on the main unit, and we offer both "RY-505ZHT" and "RY-1106WH." 【Features of RY-505ZHT】 ■ Double-sided cleaning type with two units ■ Maintains the surface temperature of substrates that require high temperature retention ■ Equipped with a clean roll that can be heated ■ Size: W430×D1,240×H1,330mm±50mm ■ Weight: 120kg *For more details, please refer to the PDF document or feel free to contact us.

• roller

Introducing a handy cleaner set using high-performance clean rolls. The RH-150/280 features a simple design suitable for various applications. The cleaner box RT-290 automatically rotates the adhesive tape when the handy cleaner is set, transferring dust and dirt from the clean roll. Additionally, we offer the pen-shaped cleaner "RH-PEN," which can easily remove dust and dirt adhered to films and other surfaces with its special ball tip. 【Product Lineup】 ■RH-150 　・Effective cleaning width: 150mm / Weight: approximately 300g ■RH-280 　・Effective cleaning width: 280mm / Weight: approximately 420g ■RT-290 　・Adhesive tape: width 290mm / Size: W435×D175×H180mm *For more details, please refer to the PDF document or feel free to contact us.

• Other clean room equipment and facilities
• Other optical parts

A convenient cleaner that easily removes fine foreign substances attached to films and other surfaces. ■□■Features■□■ ■Pen-shaped cleaner ■Easily removes fine foreign substances attached to target materials ■The silicone ball at the tip of the pen reliably catches dust and debris attached to films and other surfaces ■The tip ball is easily replaceable ■Available in silicone and butyl types.

• others

The "RYS-5296K" is a tabletop type clean roller that utilizes a clean roll and adhesive tape, making it suitable for compact and small-sized workpieces. Additionally, the "RM-8" is a device that cleans the surface and holes of printed circuit boards by using high-pressure air in conjunction with brushes. It also excels in low noise (below 70dB) and energy efficiency. 【Features of RYS-5296K】 ■ Utilizes clean roll and adhesive tape ■ Compact tabletop type suitable for small-sized workpieces ■ Size: W572×D495×H520mm ■ Effective cleaning width: 280mm ■ Applicable workpiece thickness: 0.1 to 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines
• roller

The clean roller "RY-1106" for thin plate applications employs a magnetic gear in the device drive section, completely shutting out the previously unachievable minimal dust generation from the gear area. It is compatible with high-density substrates. Both adhesive tape and clean rolls are retractable. It can clean 50μm workpieces. For more details, please download the catalog.

• Other processing machines

This is a device that cleans the surface and holes of printed circuit boards using a combination of high-pressure air and brushes. It removes dust from the uneven surfaces of the circuit board with high-pressure air and brushes. We also have demo units available, so please feel free to contact us. 【Features of RM-8】 ● Powerful cleaning capability High-efficiency air nozzles are installed both vertically and horizontally to clean both sides of the workpiece. Additionally, by combining dust removal and suction, it prevents the reattachment of removed foreign objects. ● Workpiece surface cleaning The surface of the workpiece that could not be cleaned with air is cleaned with a rotating brush. ● Cleaning with dry air A drain catch is standard equipment. ● Low energy consumption Individual air blowing and ON/OFF for upper and lower blowing can be controlled with four blocks. This allows for a reduction in running costs according to workpiece size. ● Low noise The noise level is below 70dB, making it notably quiet compared to similar devices. ● Maintenance A lamp alerts you to filter clogging or thermal trips of the blower. Additionally, the upper head unit can be easily detached and attached.

• Circuit board processing machine

The space-saving vertical clean roller "RYT-505A" features a compact design that allows for installation in limited spaces. It is even more compact than traditional vertical cleaners (about 55% the size of previous models), making it easy to clean circuit boards anywhere. It uses a tape that allows for easy cleaning of rolls, and the tape cutting process also saves space. For more details, please download the catalog.

• Other processing machines

The clean roller "RE Series" for substrate edge surfaces is a dedicated clean roller that can remove dust from all four sides. As a fully custom-made product, we design and manufacture equipment tailored to the size of your workpieces. This allows for more precise customization unique to fully ordered products. For more details, please download the catalog.

• Other processing machines