帝国電機製作所 List of Products and Services

General pumps are manufactured separately as pumps and motors and are used by coupling them together, which can lead to leakage of the handled liquid through gaps in the casing along the rotating shaft. The "Cando Motor Pump" handled by Teikoku Electric Manufacturing Co., Ltd. integrates the pump and motor into a single unit, ensuring that the handled liquid is sealed, resulting in complete leak-free operation. Equipped with standard protective devices, including bearing wear detectors (TRG, THG), it can handle ultra-high lift and is capable of accommodating large flow rates exceeding 200 m³/h. Due to its completely leak-free design, there is no concern about environmental contamination from liquid leaks, and it has a proven track record in ammonia power generation facilities, hydrogen power generation facilities, and nuclear power generation facilities. [Applications] - Ammonia co-firing in existing power plants - Fuel pumps for turbine power generation and marine engines using ammonia as fuel - Ammonia supply chain (storage tanks, transportation-related) - Addressing a wide variety of needs related to CCS and CCUS (carbon dioxide capture and storage technology) - Pumps for manufacturing and storage tanks for SAF (sustainable aviation fuel) *For detailed specifications, please download the PDF. Feel free to contact us.*

• Special Pump
• Turbo Pump
• Positive Displacement Pump

A leak-free canned motor pump is active in decarbonization-related equipment. 【Main Features】 ◆ Co-firing of ammonia in existing power plants ◆ Fuel pumps for turbine power generation and marine engines using ammonia as fuel ◆ Ammonia supply chain (storage tanks, transportation-related) ◆ Responding to a wide variety of needs related to CCS and CCUS (carbon dioxide capture and storage technology) It covers a wide range of flow rates and total head, and can also comply with various regulations. *For detailed specifications, please download the PDF and contact us. Feel free to reach out with any inquiries.

• Special Pump
• Turbo Pump
• Positive Displacement Pump

The "Pod-type Can-do Motor Pump" can handle low-temperature liquefied gases (high-pressure gases) represented by LNG, liquefied ethylene, and liquefied ammonia. It enables high-speed operation with an inverter, allowing for motor downsizing and compatibility with high head specifications. Additionally, since the entire pump section is submerged in the handled liquid, it is easier to maintain a cooling state, and it is less likely to suck in gas temporarily generated in the suction piping, thus avoiding gas ingestion troubles. 【Features】 ■ Achieves low NPSH ■ No insulation required under extreme low-temperature liquid usage ■ Less likely to suck in gas temporarily generated in the suction piping, avoiding gas ingestion troubles ■ Easier to maintain a cooling state since the entire pump section is submerged in the handled liquid ■ Compatible with motor downsizing and high head specifications ~ We will exhibit at INCHEM TOKYO 2023! ~ 　Dates: September 20 (Wed) to 22 (Fri), 2023 　Venue: Tokyo Big Sight, East Halls 1-3 　Booth Number: 1-J03 　At our booth, we will showcase a variety of product lineups that can contribute to recent decarbonization efforts. Please stop by our booth when you visit.

• Other pumps

The product is an electromagnet installed in an accelerator facility. We offer a lineup of deflecting electromagnets, quadrupole electromagnets, steering electromagnets, septum electromagnets, etc., with weights ranging from a few kg to 1,000 kg. The photo shows a laminated skew quadrupole electromagnet used in the SPring-8 storage ring, which has been manufactured to match the shape of the vacuum chamber. 【Manufacturing Specifications】 ■ Determined according to application *For more details, please refer to the PDF document or feel free to contact us.

• electromagnet

The "Live Line Oil Purifier" is a machine that purifies the insulating oil used for cooling, which is sealed inside transformers, a type of electrical equipment. The insulating oil in oil-filled switchgear, such as load tap changing transformers, deteriorates due to carbon, metal particles, and moisture generated by arcing during switching. This oil purifier removes such deteriorating components to maintain the performance of the insulating oil. It primarily consists of a pump and a filter, but some models also include automatic oil purification functions controlled by a timer or linked to the transformer. 【Specifications】 ■ Filtration precision: 0.03μm ■ Filtration capacity: Carbon 400g, Moisture 200ml ■ Filtration flow rate: 10L/min ■ External dimensions: 525L × 877H × 588W *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TRC" is a motor rotation direction detector that can detect the rotation direction of a Teikoku motor pump while it is in operation from the outside. It is compact (cigarette pack size) and easy to operate for detection. The rotation direction of general-purpose three-phase motors can also be easily detected. Simply bring the rotary checker close to the motor while the power switch is ON to easily detect the rotation direction. 【Specifications】 ■Dimensions: W66.5×D92×H28 ■Battery used: 9V manganese dry battery *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "3-Channel Manual Stroke Adjustable High-Pressure Diaphragm Pump." It can be configured with up to 6 channels, allowing each pump to operate with the same stroke length to reduce pulsation, or to adjust the flow individually to feed the required amounts of different raw materials or catalysts. It is suitable for general chemicals and gas foaming applications. 【Manufacturing Specifications】 ■ Discharge Capacity: Up to 11m³/h (Up to 22m³/h when configured with 6 channels, capable of a discharge pressure of 35MPa with a Teflon diaphragm) *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "High-Pressure Metal Diaphragm Pump" is a durable and highly reliable pump head designed for high and ultra-high pressure applications (max. 200°C). Due to its metal diaphragm, it has particularly excellent liquid impermeability, making it suitable for petrochemicals, gas foaming, supercritical CO2, hydrogen generation systems, and odorant feed. Since its production began over 20 years ago, it has continuously developed and introduced new technologies, becoming an indispensable product in the field of high pressure, small volume, and precise feeding. 【Features】 ■ Operates at discharge pressures up to 50 MPaG ■ Capable of transferring liquids at temperatures up to 200°C ■ The metal diaphragm prevents the handled liquid from permeating into the hydraulic chamber *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce our "Electric Oil Pump (for Vehicle Installation)." This is an oil circulation pump for main transformers mounted on trains, designed to be compact with an A-type motor, featuring a welded steel plate structure for seismic resistance and lightweight. Additionally, it incorporates a new theoretical bearing design and lubrication structure, and has been fully adopted by the JR Shinkansen, conventional line express and rapid trains. Based on this track record, all export vehicles also utilize Teikoku-made motor pumps. 【Manufacturing Specifications】 ■ Discharge Capacity: Up to 0.8m3/min ■ Total Lift: Up to 9.7m ■ Motor Output: Up to 3.5kW *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

This product is an application machine for A-type motor mixers. It is a canned motor mixer used in food and pharmaceutical processes, featuring buff finish and electropolished finish in the contact parts, and is suitable for vacuum, pressurized, or sterile tanks due to its seal-less structure. The simple design allows for easy attachment and detachment of the stirring blades, reducing the effort required for cleaning, and since it does not use shaft seals, there is no external contamination. 【Features】 - Suitable for the pharmaceutical, food, and cosmetics fields where sanitary operations are required - No external contamination due to the absence of shaft seals - Simple structure allows for easy attachment and detachment of stirring blades, reducing cleaning effort - Fewer parts, making it easy to handle - The use of an A-type motor results in a neat device configuration *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

This product is a unique high-speed mixer that utilizes a cand motor based on the characteristics of the A-type motor. Its completely leak-free structure, which has no shaft seal, is suitable for vacuum and high-pressure tanks. The self-lubricating method using the liquid inside the tank eliminates the need for external oil supply. The significant reduction in installation costs due to side stirring is a major attraction, making it suitable for mixing, stirring, emulsifying, promoting reactions, suspending solids, preventing sedimentation, and dissolving. 【Features】 - Uses an axial gap type (A type) motor - Compact design that saves space - Can be sanitized, making it usable in the food and pharmaceutical sectors *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

This product is an electric blower developed for SF6 gas. The centrifugal blower and induction motor are designed in a monolithic structure without a shaft seal. We aimed for complete leak-free operation. Additionally, a highly reliable oil lubrication method is used for bearing lubrication. 【Manufacturing Specifications】 ■Specifications will be determined upon consultation. *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

The "Trokopump" is a small-capacity pump in the electric oil pump series. The pump unit, which uses an oil motor and internal gear, is modularized, allowing you to select the most suitable model according to your specifications. Its completely leak-free structure, which has no shaft seal, demonstrates stable performance even under high pressure and high vacuum conditions. 【Specifications】 ■ Flow rate: Up to 100L/min ■ Discharge pressure: Up to 1.8MPa ■ Motor output: Up to 2.2kW ■ Design pressure: 3.7MPaG *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce our "Electric Oil Pump (Impeller Moving Axial Flow Type)." This pump incorporates a mechanism that allows the impeller, which was in the flow path when the pump is stopped, to move and reduce the resistance of the oil flow in natural circulation. It is suitable for oil circulation in oil-filled self-cooling and oil delivery self (air) cooling transformers. Designed for transformers with multiple ratings, it operates in oil-filled self-cooling mode under low load and in oil delivery self (air) cooling mode under high load, with internal pressure loss during pump stoppage being negligible. 【Manufacturing Specifications】 ■ Specifications to be determined upon consultation *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "Electric Oil Pump (QK, QKD Type)" is a pump used for oil circulation in large oil-cooled and oil self-cooled transformers and rectifiers. Due to its public mission and the difficulty of refurbishment, it is subject to high-quality management and has a high level of reliability. In recent years, as demands for higher efficiency and lower noise have increased, new models have been developed based on over 30 years of experience. 【Manufacturing Specifications】 ■Flow Rate: Up to 8m3/min ■Total Lift: Up to 20m ■Motor Output: Up to 22kW *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

This product is a pump designed to handle high-melting-point and high-temperature liquids such as molten salts. A gas chamber is provided at the top of the pump section to control the liquid level, ensuring that high-temperature liquid does not reach the mechanical seal. The bearings and mechanical seal are lubricated and cooled by oil from an external cooling device. 【Manufacturing Specifications】 ■ Temperature: Up to 600℃ (Specifications to be determined upon consultation) *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a completely leak-free pump that utilizes the magnetic force of a magnet in the mechanism that transmits the motor's power to the pump impeller, without any shaft seal. It is suitable for strong acids, strong alkaline liquids, and corrosive liquids in general. The wetted parts are made of high-quality corrosion-resistant materials such as ETFE, PVDF, Rulon, and ceramics, allowing for safe use in the transfer of highly corrosive liquids. 【Specifications】 ■Flow rate: Up to 1.2m³/min ■Total head: Up to 42m ■Motor output: Up to 15kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a gas-sealed slurry pump that incorporates a self-priming function using a general-purpose motor. The specially designed casing exhibits powerful self-priming capabilities while preventing the slurry from coming into contact with the mechanical seal, resulting in a long-lasting, leak-free self-priming slurry pump. It can be utilized for various waste liquids, including slurry and sludge treatment. 【Specifications】 ■Flow rate: Up to 1.2 m³/min ■Total head: Up to 50 m ■Motor output: Up to 15 kW ■Slurry concentration: Up to 60 wt% *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Cando Motor Crusher" is a suitable product for crushing solid materials that have accumulated in pipes and tanks, as well as for resolving blockages in piping. This innovative crusher consolidates the know-how developed with the Teikoku Cando Motor Mixer to eliminate blockages in process lines. It crushes solid materials at high speeds of 1000 to 3600 r/min (synchronous speed). We offer three types of installation methods: direct tank installation, pit installation, and line installation. 【Specifications】 ■Motor output: up to 20 kW ■Rotational speed: 1000 to 3600 r/min ■Material for contact parts: various corrosion-resistant materials *For more details, please refer to the PDF materials or feel free to contact us.

• Crusher

This product consists of a seal-less reactor that replaces the conventional top-insert type agitator (with mechanical seal) with a canned motor agitator installed at the bottom of the tank. It is also possible to add a canned motor aerator to promote the reaction. There is no need for flushing to the mechanical seal or lubrication supply to the reduction gear. Not only does it improve reaction efficiency, but it also enables a completely closed reactor, making it easy to solve problems related to cleaning and contamination. 【Features】 ■ It is possible to add a canned motor aerator to promote the reaction. ■ There is no need for flushing to the mechanical seal or lubrication supply to the reduction gear. ■ It enables a completely closed reactor, not just an improvement in reaction efficiency. ■ Problems related to cleaning and contamination can also be easily resolved. *For more details, please refer to the PDF materials or feel free to contact us.

• Mixer/agitator

This product is a completely leak-free high-speed mixer that inherits the features of the canned motor pump. It can be easily installed in vacuum tanks or pressure tanks, and can be mounted on the bottom or the side. By adopting a self-lubricating method using the liquid in the tank, external lubrication is unnecessary, expanding its applications in the food industry as well. 【Features】 ■ Uses a radial gap type (R type) motor ■ Capable of handling high pressure ■ Standardized for large capacity machines (up to 20 kW) ■ Specifications over 20 kW are available upon consultation *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

The "Pod-type canned motor pump" can handle low-temperature liquefied gases (high-pressure gases) such as LNG, liquefied ethylene, and liquefied ammonia. It enables high-speed operation with an inverter, allowing for downsizing of the motor and accommodating high head specifications. Additionally, since the entire pump section is submerged in the handled liquid, it is easier to maintain cooling conditions, and it is less likely to ingest gas that temporarily occurs in the suction piping, thus avoiding gas ingestion troubles. 【Features】 ■ Achieves low NPSH ■ No insulation required under extreme low-temperature liquid usage ■ Less likely to ingest gas that temporarily occurs in the suction piping, avoiding gas ingestion troubles ■ Easier to maintain cooling conditions as the entire pump section is submerged in the handled liquid ■ Capable of downsizing the motor and accommodating high head specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

This product is a compact and lightweight ultra-low NPSH req. canned motor pump developed specifically for absorption heating and cooling units. By adopting a welded steel structure container designed for use under high vacuum conditions, it maximizes the features of the canned motor pump and significantly enhances the reliability of the equipment. 【Specifications】 ■Flow rate: Up to 1600L/min ■Total head: Up to 35m ■Motor output: Up to 37kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a space-saving inline canned pump particularly suitable for liquefied gases with high vapor pressure and low NPSHa. It can be configured as either a reverse circulation type or an internal circulation type. Please utilize it for high vapor pressure hydrocarbons such as LPG, ethylene, and propylene, as well as applications that require reduced installation space. 【Manufacturing Specifications】 ■Flow rate: 7m³/min ■Total head: 160m ■Motor output: 120kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a submersible canned motor pump used for liquid transfer from an LPG tank buried underground. The pump, suspended from the surface into the tank, operates as a 2-pole machine during normal operation, but runs as a 4-pole machine for energy-saving operation during standby. Safe operation is ensured by a separate operating monitoring panel with built-in protective devices. 【Manufacturing Specifications】 ■Flow Rate: Up to 300L/min ■Total Head: Up to 140m ■Motor Output: Up to 11kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a canned motor pump used for transferring from LPG tanks installed on the ground. It features a vertical design with a reverse circulation method, combined with a standard-equipped inducer, allowing for stable operation. Please feel free to contact us when you need assistance. 【Specifications】 ■Flow rate: Up to 7m³/min ■Total head: Up to 160m ■Motor output: Up to 120kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is one of the largest motor pumps in the world. It is possible to combine a maximum 550kW canned motor, which greatly exceeds the previous maximum motor output of 220kW, with pumps such as F type, R type, and B type. The motor power supply voltage is available in high voltage 3kV class and low voltage 400V class. 【Specifications】 ■Flow rate: up to 25m3/min ■Total head: up to 150m ■Motor output: up to 550kW *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

This product is a pump that conforms to the API685 standard. It mainly handles high-temperature and high-pressure hydrocarbons in the petroleum refining process. The casing is a canned pump with a centerline support structure, providing double safety and reliability against thermal stress. 【Manufacturing Specifications】 ■Motor Output: Up to 220 kW ■Specifications to be determined upon consultation *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "High-Temperature High-Head Multistage Pump (B-M Type)" is a pump that combines a back-to-back impeller multistage pump with a high-temperature specification for a canned motor. The internal side of the motor is cooled by the pump liquid itself, which is self-circulated through a directly connected heat exchanger, and the bearings are lubricated with the same liquid, eliminating the need for external lubrication or cooling agent injection. This product is suitable for petroleum refining processes and other applications where high temperature and high head are required, as it alleviates concerns regarding shaft seals. 【Specifications】 ■ Flow Rate: Up to 2.5 m³/min ■ Total Head: Up to 550 m ■ Motor Power: Up to 220 kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a boiler circulation canned pump that offers significant improvements in motor lifespan (compared to wet motors), as well as enhancements in maintenance costs and duration, and is also highly superior in safety. It is used in power plants and is suitable for hot water boilers and thermal oil boilers. Please feel free to contact us when you need assistance. 【Manufacturing Specifications】 ■Specifications will be determined after consultation. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "Cascade Candle Pump (PT type)" is a compact vortex-type candle motor pump designed for low flow and high head. It is suitable for industrial machinery that requires compact and leak-free pumps, such as temperature control devices and cleaning equipment. It is also suitable for chemical processes that require relatively high heads. 【Specifications】 ■ Flow rate: 2–60 L/min ■ Total head: up to 125 m ■ Motor output: 0.75–3.7 kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Gas Seal Type Slurry Pump (XG Type)" is a canned motor pump that can be used even when a large amount of slurry is mixed in the handling liquid. Between the pump and the motor, there is a gas chamber, and the motor side is filled with clear liquid, which lubricates the bearings and cools the motor through a self-circulation circuit. Additionally, there is an external liquid injection type "SG Type." 【Manufacturing Specifications】 ■Flow Rate: Up to 7m3/min ■Total Head: Up to 160m ■Motor Output: Up to 120kW ■Slurry Concentration: Up to 30wt% *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Slurry Seal Type (D Type)" is a canned motor pump that can be used even when there are minute slurries mixed in the handled liquid. The motor side, separated by a mechanical seal, is filled with a clear liquid that does not contain slurry, and it has a self-circulation circuit for lubricating the bearings and cooling the motor, making it easy to handle slurry liquids. 【Specifications】 ■ Flow rate: Up to 10m³/min ■ Total lift: Up to 160m ■ Motor output: Up to 120kW ■ Slurry concentration: Up to 3-5wt% *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Self-priming (G type)" pump can lift liquid even when the suction piping is not filled with liquid, thanks to its automatic air extraction capability. It demonstrates excellent self-priming performance due to the synergistic effect of the specially designed pump casing and inner casing. Please use it for drawing from underground tanks, extracting from tank trucks, and drawing from drums. 【Manufacturing Specifications】 ■Flow rate: Up to 3m³/min ■Total lift: Up to 100m ■Motor output: Up to 50kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "High Melting Point Liquid Pump (K-S Type)" is designed to handle liquids with high melting points that are prone to crystallization. There are two types in the lineup based on the circulation method: external circulation type (K-S type) and internal circulation type (K type). Each part of the pump is equipped with a heating jacket to maintain the contact parts at a temperature above the melting point, preventing the crystallization and solidification of the liquid. 【Specifications】 ■Flow rate: up to 10m3/min ■Total head: up to 100m ■Motor output: up to 160kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Medium Heat Resistant Type / High Heat Resistant Type / Ultra Heat Resistant Type" is a type of motor that significantly enhances heat resistance performance by using inorganic insulating materials such as mica and glass fiber for the motor windings. When handling high-temperature liquids, this type offers a significant reduction in heat loss compared to water-cooled motors, and it is an energy-saving design that does not require cooling water. It can operate while keeping the entire motor pump heated and insulated with a heating jacket. 【Manufacturing Specifications】 ■ Motor Output: Up to 160kW / 60kW ■ Handling Liquid Temperature: Up to 230℃ / 340℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "High Temperature and High Pressure Type" is a pump designed for supercritical processes that require high pressure resistance and high heat resistance, making it the ultimate pump for circulating and feeding supercritical fluids without concerns about leaks or seals. Due to its high reliability under high pressure and high temperature, it is widely adopted in nuclear applications and chemical processes. 【Manufacturing Specifications】 ■ Specifications to be determined upon consultation *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "High-Temperature Separation Type (B Type)" is a pump that handles high-temperature liquids such as thermal oil and hot water. The liquid on the motor side is circulated through a self-circulation circuit that cools the motor and lubricates the bearings via an auxiliary impeller, returning to an external heat exchanger in a low-temperature zone. The adapter is designed to minimize the inflow of high-temperature liquid to the motor side and reduce thermal conduction. 【Manufacturing Specifications】 ■ Flow Rate: Up to 13m³/min ■ Total Head: Up to 160m ■ Motor Output: Up to 220kW ■ Handling Liquid Temperature: Up to 450℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Reverse Circulation Type (R Type)" is a pump designed to handle easily vaporized liquids such as liquefied gases and low-boiling point liquids. The circulating liquid that lubricates the bearings and cools the motor is structured to return to the vapor zone of the suction tank, allowing for stable operation without issues such as cavitation or vapor lock. 【Manufacturing Specifications】 ■ Flow Rate: Up to 13m³/min ■ Total Lift: Up to 160m ■ Motor Output: Up to 220kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "double suction type" is a convenient pump that can handle large flow rates, which would normally require two units operating in parallel, with just one unit. In addition to the basic model, the addition of multi-stage types for high head and low flow, as well as double suction types for low head and high flow, has further expanded and enhanced the range of applications for the canned motor pump. It is suitable for organic and inorganic chemical agents, vacuum systems, high-pressure systems, and radioactive liquids for nuclear applications. 【Manufacturing Specifications】 ■Flow rate: Up to 15m³/min ■Total head: Up to 90m ■Motor output: Up to 220kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

In its basic form, it consists of a single impeller, which limits the achievable head and does not provide high efficiency depending on the flow rate. The "multistage type (F-M type)" is a canned motor pump that can achieve high efficiency and quiet operation with an appropriate number of impellers based on specifications and unique design. It can be used for RO membranes, hot water, organic and inorganic chemicals, vacuum systems, high-pressure systems, and radioactive liquids for nuclear applications. 【Manufacturing Specifications】 ■Discharge capacity: up to 2.5 m³/min ■Total head: up to 550 m ■Motor output: up to 220 kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This product is a basic model of the Teikoku motor pump, capable of handling clear, low to medium temperature liquids without slurry, with complete leak-free operation. It is suitable for organic and inorganic chemical agents, vacuum systems, high-pressure systems, and radioactive liquids for nuclear applications. There are two types: a direct mounting type (F type) that attaches the pump directly to the motor flange, and an adapter type (FA type) that attaches via an adapter, allowing for flexible combinations of motors and pumps. 【Specifications】 ■ Flow rate: up to 13m³/min ■ Total head: up to 160m ■ Motor output: up to 220kW *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We handle "Teikoku Metering Pumps." The pump head is completely sealed, making it suitable for handling hazardous liquids such as toxic or flammable substances, high-temperature liquids, high-melting-point liquids, foul-smelling liquids, and liquids that change when exposed to the atmosphere. (Compliant with the High-Pressure Gas Safety Act) It can accommodate slurry and high-viscosity liquids. By varying the stroke length, it achieves high metering accuracy across a wide flow range. 【Features】 ■ Completely sealed pump head, compliant with the High-Pressure Gas Safety Act ■ Capable of handling slurry and high-viscosity liquids ■ High metering accuracy across a wide flow range ■ Equipped with a pump check valve that is durable and suitable for the operating conditions ■ PTFE diaphragm pumps come standard with a diaphragm rupture detector *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

We handle the "Compact High-Speed Cando Motor Pump." Equipped with an inverter as standard, it achieves energy savings. It has succeeded in high-speed rotation and compact design. Due to the adoption of the cando motor, it is completely leak-free. It also features a bearing wear detection function. 【Features】 ■ Standard inverter equipped for energy savings ■ Achieves high-speed rotation and compact design (Conventional commercial frequency motors can also be installed) ■ Completely leak-free due to the adoption of the cando motor ■ Bearing wear detection function included (TRG detection panel meter) ■ Compliance with regulations possible (for refrigeration experiments, etc.) *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

It is suitable for gas-liquid contact through gas dispersion, wastewater purification devices (aeration), and other hydrogenation reactions. The powerful shear force of the stirring blades breaks down bubbles into smaller sizes. The suction effect of the stirring blades allows for self-priming of air. A sparger is not required. The self-priming type disperses the gas phase at night simply by installing the suction piping. The pressurized supply type is used when there is a large gas supply or when the liquid depth is deep. For dispersing gas over a wide area, multiple installations are recommended. For more details, please contact us or download the catalog.

• shaker