アルメックホンゴ Product Lineup

The "3-axis turret processing machine" is a device that performs drilling and tapping on square and round pipes. It processes from three directions—left, right, and above—using six turret heads for each direction on the workpiece cross-section. The workpieces are individually chucked from the input conveyor and pulled in the longitudinal direction, with sequential hole processing and discharge towards the back of the machine, utilizing a workpiece movement processing method. 【Features】 ■ Equipped with loading and unloading devices ■ Possible to establish a line with cutting devices installed in the front and rear processes ■ Performs drilling and tapping on square and round pipes ■ Processing method based on workpiece movement *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We achieved continuous operation without chocolate stops by using tape feeding without a rotating actuator and a unique cutting mechanism.

• Other processing machines
• Mechanical Design

Installed in a clean room. Achieved a reduction in the burden of handling long workpieces.

• Other surface treatment equipment
• Other processing machines

Utilizing an 8-axis servo, freely set all parameters for preheating, pretensioning, molding, including temperature, time, speed, and pressure. Additionally, register multiple setting patterns that include changes in processing order for immediate recall.

• Resin processing machine
• Mechanical Design

Equipped with two cutting heads, significantly reducing processing time.

• Resin processing machine
• Mechanical Design

Device for cutting resin boards to arbitrary dimensions.

• Resin processing machine
• Mechanical Design

This is a device that cuts film to a set length. It significantly reduces the time required for cutting the film to the specified length. Furthermore, it contributes to achieving zero defective products with precision cutting at ±0.5mm. *For more details, please feel free to contact us.*

• fiber
• Textile Processing Machinery
• Mechanical Design

By performing the processes of notching, hole machining, tight material insertion, and cutting all at once, significant time savings and process reduction are possible! Additionally, since it is done fully automatically, human errors are eliminated.

• Extrusion Machine
• aluminum
• Other processing machines

Remove the product from the die-casting machine using a robot, set it, and remove burrs with a mold. High-speed impact-free residual material ejection mechanism (Patent No. 2774254).

• Casting Machine
• Drive system parts
• Other processing machines

Supports various work types with a barcode reader. Easy single-action operation via a liquid crystal touch panel.

• aluminum
• Extrusion Machine
• Other processing machines

Simultaneous processing at 10 locations with a 6-axis, 4-axis tap head. Up to 4 dedicated pallets can be set, significantly reducing exchange time.

• Storage
• Industrial PCs
• Other processing machines

After setting the work crescent, it automatically performs everything from inserting the tight material to drilling holes and tightening screws.

• Extrusion Machine
• aluminum
• Rubber

Supports a wide variety of product trimming through mold stage changes. With the sorting mechanism, it is also possible to automatically sort up to four types of products after trimming.

• Other Auto Parts
• Other processing machines
• Casting Machine

By using hot melt, cleaning and maintenance become easier compared to traditional bonding methods, and the application speed increases several times.

• Mechanical Design
• Other processing machines

By changing the setup of the jig and the riveting roller, it is possible to accommodate different shapes of materials.

• aluminum
• Extrusion Machine
• Mechanical Design

The profile set is automatically dispensed in front of the machine after manual processing. The processing data is read from a barcode. Feed one-axis positioning control.

• aluminum
• Extrusion Machine
• Mechanical Design

The work phase can be arbitrarily determined at 360 degrees by the round table.

• Other processing machines
• Mechanical Design

Set up two molds for drilling holes and notching in the middle section of the shaped material. Positioning is done using a left side single-axis stopper (movement distance 1300mm).

• aluminum
• Extrusion Machine
• Mechanical Design

All processes such as end hole machining, intermediate hole machining, rubber insertion, and seal attachment are performed automatically. An automatic mold exchange device for different shapes is included.

• aluminum
• Extrusion Machine
• Mechanical Design

Perform hole processing at the designated position and tighten screws using automatically supplied screws. It is also possible to supply and insert tight materials as an option.

• Extrusion Machine
• aluminum
• Other processing machines

Punch processing for carport roof material retention.

• Extrusion Machine
• aluminum
• Other processing machines

A device that sets the angle with side positioners and automatically performs welding with a central robot.

• Welding Machine
• Welding robot
• Other processing machines

Cutting patterns from 1 to 99 can be registered and edited. Conveying devices and deburring machines can be lined up before and after.

• Extrusion Machine
• aluminum
• Other processing machines

Simultaneous set of two materials is possible. Significant time savings can be achieved by simultaneous processing with movable processing heads on both sides.

• Vehicle body parts
• Other processing machines
• Contract manufacturing

A device that attaches aluminum tape with a release film to the edge (end face) of laminated glass and cuts the tape to a specified length. The work set is done manually, but automation is also possible. It can accommodate other materials such as copper tape.

• Other processing machines

Our company handles processing equipment and facilities. This document introduces an example of our products. We provide clear photographs and descriptions of processing equipment, including welding robot systems that perform automatic welding, metal processing equipment, and production line facilities. 【Featured Products (Partial)】 ■ Other processing equipment ■ Various transport devices ■ Machining jigs ■ Production line equipment ■ Metal processing equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

Our company undertakes everything from planning and design (mechanical and control) to manufacturing and delivery in response to requests for labor-saving, high-speed, and unmanned production sites. There is no "final destination" in our work. This is because we must constantly think of new ideas, actually create them, and continue to make progress. For labor-saving, high-speed, and unmanned solutions, please contact us. We will strongly support you with the various challenges faced in production sites. 【Business Content (Equipment Design and Manufacturing)】 ■ Planning: Plans and concepts for equipment tailored to customer requests ■ Development: Mechanical development for various networks ■ Design: Mechanical and software design using CAD ■ Manufacturing: Processing and assembly through various machining methods *For more details, please refer to the PDF materials or feel free to contact us.

• Mechanical Design

I want to improve product quality! I want to do something about dangerous work! Labor costs are becoming unmanageable! Do you have various concerns like these? Based on such voices, we will create a plan and offer proposals that are unique to our company. We will definitely deliver reliable products. 【Features】 ■Cost reduction ■High quality and high performance ■Short delivery time *For more details, please refer to the PDF or feel free to contact us.

• Contract manufacturing

Using a two-axis servo, glass can be cut to any dimension (simple Numerical Control cutting machine). A blow-off splitting table can be lined up in the subsequent process.

• Other industrial robots
• Touch Panel
• Other processing machines