エステック List of Products and Services

The "SR Series" is an automatic precision cutting machine suitable for research and development fields for cutting various metal samples, electronic substrates, ceramics, microscope samples, crystals, and more. Despite its compact and space-saving tabletop design, it achieves high cutting capability. It can accommodate various workpieces and is easy to operate even for beginners. It features a fully enclosed transparent cover that prevents the scattering of grinding dust and cutting fluid, allowing for clear visibility of the cutting situation. 【Features】 ■ Burn-free cutting surface ■ Clean cutting with skip cutting function ■ Capable of cutting high-hardness heat-treated materials ■ Standard equipped with emergency stop button and fully enclosed cover interlock *For more details, please refer to our comprehensive catalog of cutting machines available for download in PDF format.

• Testing Equipment and Devices
• Other machine tools

"CC1" quickly and easily forms metal samples using fluorescent X-ray analysis and luminescence spectroscopic analysis methods. It consists of a high-frequency oscillator that dissolves metals through high-frequency induction, a centrifugal casting section, and a compact control and operation section. Shavings and chips can also be used, and by placing them in the crucible, a complete sample can be produced in a short time. 【Features】 ■ Dissolves shavings and block pieces through high-frequency heating ■ Can load up to 50g of sample into the crucible ■ Capable of handling a wide range of materials from ferrous to non-ferrous due to vacuum tube-type high-frequency heating ■ Clean sample collection with no oxidation due to argon sealing ■ Excellent maintenance with a fully open cover * For more details, please refer to the PDF document or feel free to contact us.

• Casting Machine

The "SG/SGA" is a compact and low-cost grinding device that condenses the functions of large machines for samples of cast iron, pig iron, and ultra-hard special steel. When samples are set on the turntable, it automatically performs chucking, rough and finishing grinding, and is equipped with an auto-dress function that automatically dresses the grinding wheel surface. 【Features】 ■ Standard auto-dress function ■ High efficiency with a sample set capacity of 8 pieces ■ Automatic control of grinding pressure *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives
• Wafer processing/polishing equipment

The "SB1/SBL" is an efficient machine that automatically achieves a stable, smooth polished surface. It allows for safe operation due to its automation and speeds up quality checks. We offer a cost-effective "SB1 type" and a high-performance "SBL type." 【Features】 ■ Stable finish ■ Compact ■ Automatic operation *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives
• Wafer processing/polishing equipment

The "CGB" is a device that automatically performs the processes of sample polishing, microscopic observation, and measurement of the graphite spheroidization rate of spheroidal graphite cast iron. Once a sample that has undergone deburring and rough polishing is set in the sample acceptance position of this machine and the operation is started, it will automatically carry out six stages of polishing. Through image processing from microscopic imaging, the graphite spheroidization rate is measured and data is outputted using a method compliant with the new JIS standards. 【Features】 ■ Significant efficiency improvement through process automation ■ Enhanced quality through multi-stage polishing ■ Improved cooling efficiency with mist spraying ■ Standard equipped with a turntable for sample supply ■ Working time is about half that of manual labor *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Since our establishment, we have introduced numerous groundbreaking products to the world. We challenge ourselves with new things without being confined to a single field. This attitude sharpens our technology and shapes our history. Our unwavering passion since our founding in 1991 is, "We want to challenge because no one else is doing it." This sentiment will continue unchanged in the future. 【Manufactured Products】 ■ Carbide circular saw cutting machines, grinding wheel cutting machines ■ Sample preparation devices (sample preparation for iron, non-ferrous metals, soil, proteins, cement, asbestos, etc.) ■ Conveying devices ■ Marking devices ■ Vacuum devices ■ Other labor-saving equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Vacuum forming machine
• Other processing machines

The "Lamp Crusher" is a device that easily and safely crushes and reduces the volume of unwanted fluorescent lights. It is designed to be placed on a standard drum, so no special container is required. We offer a model specifically for straight fluorescent lights, the "CF type," as well as the "CFR type," which can handle both circular and straight fluorescent lights, suitable for large-scale crushing. 【Features】 ■ Reduces storage space for unwanted fluorescent lights ■ Lowers transportation costs to recycling facilities ■ Safe transportation without the worry of breakage ■ No special container required *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Fluorescent lamp

The automatic bead sampler "BS type" automates a series of operations from sample input to bead output, and is a device that oxidizes the iron content in iron ore raw materials and slag fine powders. It uses high-frequency heating to convert fine powders such as cement blending materials, clinker, and steel slag into glass beads, resulting in a completely amorphous state that is not affected by changes in mineral structure during analysis accuracy. Additionally, we also offer the "BF type," which automates the melting process. 【Features】 ■ Automation from sample input to bead output ■ Not affected by changes in mineral structure during analysis accuracy ■ Suitable for cement, slag, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Casting Machine
• Articulated Robot

Estec Co., Ltd., which handles cutting machines, sample preparation (cutting, grinding, melting, powdering), and automation equipment, introduces bio-related devices that support research. The protein crystallization system "TERA" performs crystallization and crystal observation tasks automatically to produce high-quality crystals necessary for X-ray crystallographic analysis of proteins. It accommodates structural genomics/structural proteomics research that handles a large number of protein samples at once. Additionally, the "automated glycan synthesis device" automates part of the liquid-phase glycan synthesis process that was traditionally done manually, contributing to improved efficiency in glycan research. *For more details, please refer to the PDF materials or feel free to contact us.*

• others
• Other processing machines

The "Vacuum Plasma Irradiation Device" is a device that gently modifies the surface in contact with cells to be cell-friendly. It can freely modify the resin surface to be either hydrophilic or hydrophobic, allowing for processing under optimal conditions. We find the most suitable plasma irradiation conditions for various materials. We also accept contract processing. 【Features】 ■ Powerful and uniform irradiation with no processing unevenness ■ Minimal etching effect, resulting in almost no physical damage to materials ■ High-density functional groups can be generated, enabling direct bonding without adhesives ■ Extremely low regression of functional groups ■ Extremely low gas consumption *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

The "Fully Automatic Cell Recovery Device" maintains a clean environment inside the device, which is essential for cell manipulation. Additionally, it is equipped with a built-in microscope stage and focus positioning, fluorescence detection, multiple laser irradiation, and an automatic medium recovery function. As an all-in-one device, it enables cell fusion for introducing large genes, automatic time-lapse observation of specific cells, rapid diagnosis, and automatic recovery of target cells, paving the way for a new field of cell manipulation. We will create custom-made machines tailored to various functions according to research needs. 【Functions/Configuration】 ■ Environmental management HEPA filter temperature control function ■ Handling robot ■ Dual-type syringe pump ■ Inverted microscope with electric functions ■ Laser introduction mechanism ■ Electric XY stage ■ Chamber lid for medium exchange/cell recovery ■ CO2 incubator *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

The "Tabletop Cell Fusion and Recovery Device" is a device that enables direct manipulation of cells by introducing and controlling multiple laser beams into a microscope. With the motorization of the stage and objective lens, automatic processing can be performed without losing focus, even for tasks over a wide area. We create custom-made machines tailored to various research needs. 【Features】 ■ Portable and easy to introduce into research environments ■ Simple clean environment setup ■ Most microscope operations can be performed using a mouse ■ Observation is conducted solely with a CCD camera, preventing laser light from entering the eyes ■ Equipped with a culture medium exchange unit *For more details, please refer to the PDF document or feel free to contact us.

• Laser microscope
• Other physicochemical equipment

Estec offers a variety of sample preparation machines. This includes the fully automatic, 24-hour continuous unmanned operation powdered ore automatic moisture measurement device "FOA," as well as the ICP automatic pretreatment system "CMA" and the automatic specimen cutting line "CLS." 【Product Lineup】 ■ Powdered Ore Automatic Moisture Measurement Device FOA ■ ICP Automatic Pretreatment System CMA ■ Automatic Specimen Cutting Line CLS ■ Centrifugal Casting Machine CC1 ■ Water Cutting Machine PSB ■ Three-Dimensional Transport System RC *For more details, please refer to the PDF document or feel free to contact us.

• others
• Casting Machine
• Articulated Robot

The "Cutting Machine" is a sample cutting machine using cutting wheels. The "Crushing and Pressing Machine" is a pre-treatment device for slag and raw material analysis. The "SD/ST," which provides extremely clean cross-sections, has high degrees of freedom in operation with vertical and horizontal movement of the grinding wheel and the workpiece, allowing it to accommodate various sample shapes. Additionally, we offer a range of crushing and pressing machines, including the fully automatic fine grinding and pressing device "SPA" and the briquette press "NSP." 【Product Lineup (Cutting Machines)】 ■SKD ■SKC ■SH ■SKE ■SD/ST *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Plastic processing machines (cutting and rolling)
• Crusher

This catalog features a wide range of cutting machines from Estec Co., Ltd., the best partner for "cutting" technology. We offer a comprehensive lineup, including the "Automatic Precision Cutting Machine," ideal for creating cut samples, and the "Tungsten Carbide Circular Saw Cutting Machine," perfect for cutting materials for mass-produced parts. 【Featured Products (Excerpt)】 ■ Automatic/Manual Cutting Machines ■ Tungsten Carbide Circular Saw Cutting Machine for Aluminum ■ Automatic Precision Cutting Machines (Small to Large) ■ Surface Grinding Machines ■ Mirror Polishing Machines *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

We would like to introduce "Mild Plasma," which generates high-density functional groups and achieves direct bonding without the use of adhesives. Using a unique power supply and electrodes, it creates an unparalleled plasma irradiation effect. There is no aging change in the irradiation effect, and it allows for control of the modification of the nano-level surface without causing physical damage to the material. 【Features】 ■ Generation of high-density functional groups on the surface ■ Prevention of regression of functional groups through the generation of a specially structured crosslinking layer ■ Mild plasma energy with minimal surface etching ■ No restrictions on the types of gases that can be used *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Belger-type Vacuum Plasma Irradiation Device" is a device that enables rapid plasma irradiation even for small samples. By using a unique power supply and electrodes, it demonstrates excellent plasma irradiation effects, achieving surface treatment with no changes over time. With a transparent glass chamber, it is possible to observe subtle changes inside during plasma treatment. You can discover plasma irradiation conditions suitable for your samples and build your own unique know-how. [Examples of Applications] ■ Strength enhancement of carbon fiber composites ■ Improvement of wettability of petri dishes ■ Low-invasive cell culture ■ Improvement of wettability of chemicals on fluorine-based resin surfaces *For more details, please refer to the PDF materials or feel free to contact us. ★ Free plasma irradiation tests are currently being conducted We offer trial irradiation treatments for up to three conditions for the first time. Experience the effects for yourself. Processing of plate-shaped samples is also possible.

• Other physicochemical equipment

The "Roll-to-Roll Plasma Irradiation Device" is an irradiation device capable of processing roll-to-roll widths of up to 500mm. We also accept contract processing for rolls narrower than 500mm. The standard type of device can accommodate widths of up to 1000mm; for other widths, please consult us. 【Features】 ■ Capable of processing roll-to-roll widths of up to 500mm ■ Plasma irradiation can be applied to both sides or one side, processed in a roll-to-roll manner ■ The standard type of device can accommodate widths of up to 1000mm *For more details, please refer to the PDF materials or feel free to contact us.

• Other physicochemical equipment

The "Gas Analysis Sample Machine" is a fully automatic surface treatment machine for block samples that performs trace C/S and O/N analysis, which are essential for high-quality steel manufacturing. The "AP," which achieves accurate O2 analysis through vacuum arc plasma treatment, processes samples from acceptance to preparation and gas analysis in about 30 seconds, making it a fully automatic machine capable of rapid analysis. Other models such as "NA" and "DS6/DS1" are also available in the lineup. 【Product Lineup】 ■AP ■NA ■DS6/DS1 ■RS ■CSP, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "grinding machine" is an automatic machine for stone grinding or belt grinding. By automating the grinding process, a stable analysis surface is achieved. We offer a lineup that includes the high-speed automatic belt grinder "SBL," the cost-effective model "SB," and the fully automatic "SGA," which handles everything from acceptance to stone grinding and discharge to analysis devices. 【Lineup】 ■SBL ■SB ■SGA ■SG ■GBS ■CGB *For more details, please refer to the PDF document or feel free to contact us.

• others
• Other abrasives

The "cutting machine" is a dedicated cutting machine that ensures no contamination on the sample analysis surface. The "SM model," which performs everything from acceptance to cutting and transfer to the analysis device fully automatically, achieves improved analysis accuracy due to its stable finished surface. The temperature rise of the finished surface is about 10°C, preventing burning and burr formation. We also offer other models such as "TCS" and "TSE." 【Product Lineup】 ■SM/TS ■TCS ■TSE ■TSM *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other cutting tools

The "multifunction machine" is a fully automatic device that compactly integrates cutting, grinding, and punching functions. The "ASM," a dedicated sample preparation device for high-quality steel manufacturing, is an all-in-one automatic machine that can simultaneously produce samples for optical emission spectroscopy, X-ray fluorescence analysis, and gas analysis. It is compatible with all types of steel, from low carbon steel to high carbon steel and stainless steel. Other models such as "SGM" and "ASE" are also available in the lineup. 【Lineup】 ■ASM ■SGM ■SGM-P ■ASE *For more details, please refer to the PDF materials or feel free to contact us.

• others
• X-ray fluorescence analyzer
• Spectroscopic Analysis Equipment

Estec Co., Ltd. is a company that primarily handles steel sample preparation machines, carbide circular saw cutting machines, various types of grinding wheel cutting machines, sample polishing machines, vacuum devices, marking devices (stamping, laser, inkjet), various transportation devices, labor-saving equipment, bio-field labor-saving machines such as protein crystallization, and various measurement and inspection machines. Since its establishment, our company has introduced numerous groundbreaking products to the world. In 2001, we ventured beyond our primary focus on manufacturing and processing to begin developing devices in the bio field, completing our first machine, the "Protein Crystallization System." We constantly challenge ourselves with new things without being confined to a single field. This attitude sharpens our technology and shapes our history. 【Manufactured Products】 ■ Carbide Circular Saw Cutting Machines ■ Grinding Wheel Cutting Machines ■ Sample Preparation Devices ■ Transportation Devices ■ Marking Devices ■ Vacuum Devices ■ Other Labor-Saving Equipment *For more details, please refer to our catalog or feel free to contact us.

• Other cell research
• Other Protein Research
• Other analytical and testing equipment

Estec Co., Ltd.'s "Fully Automatic Cell Recovery Device" maintains a clean environment inside the device, which is essential for cell manipulation. Additionally, it is equipped with a built-in microscope stage and precise focus positioning, fluorescence detection, multiple laser irradiation, and an automatic medium recovery function. As an all-in-one device, it enables cell fusion for introducing large genes, automatic time-lapse observation of specific cells, rapid diagnosis, and automatic recovery of target cells, paving the way for a new field of cell manipulation. [Features] - All-in-one device - Equipped with automatic recovery function - Clean internal environment - Custom-made machines with various customized functions available *For more details, please refer to the catalog or feel free to contact us.

• Other cell research

"TERA" is a compact fully automated system that can organically handle crystallization experiments, which tend to become vast and complicated. It performs crystallization and crystal observation tasks necessary for producing high-quality crystals for X-ray crystallographic analysis of proteins fully automatically (unmanned). It is suitable for structural genomics/structural proteomics research that deals with a large number of protein samples at once. [Features] - Operates unmanned - Organically handles crystallization experiments - Compact *For more details, please refer to the catalog or feel free to contact us.

• others

Each setting can be easily configured using the display's numeric keypad. By using ceramic for the saw blade vibration prevention guide, high precision is maintained, which improves the lifespan of the saw blade and achieves maintenance-free operation of the guide.

• Other machine tools