栗田鑿岩機 List of Products and Services

The rolling machine is a processing method that deforms materials with strong force, allowing for the shaping of rod-like products while rotating. Additionally, rolled screws have greater strength compared to cut screws, and they also have higher processing efficiency, making them suitable for mass production. At Kurita Sakuganki, we manufacture and sell machinery for steelmaking and civil engineering, including rolling machines. *For more details, please contact us.

• Other processing machines
• Other machine tools

The civil engineering-related product "Hydraulic Concrete Dresser" is a surface grinding machine for concrete. It is attached to a hydraulic excavator and operates using the hydraulic power of the shovel. It can be easily mounted on heavy machinery that has breaker piping. The dresser can be oriented in any direction using a swivel plate. Since it does not produce impact, it is low noise and low vibration. For more details, please download the catalog.

• Other cutting tools

The civil engineering-related product "Heavy Machinery Green Cutting Machine" is equipped with a 650mm diameter brush embedded with steel wires for sweeping, which is mounted on a mini hydraulic excavator and performs green cutting in both forward and reverse rotation. Formwork cleaning is done with the hammer positioned sideways. The mounting machinery is 0.113. The brush diameter (brush embedding plate made of aluminum) is 650mm. The length of the flat steel wire is approximately 250mm. The flat steel wire embedding locations are 6 layers (20 locations per layer). The brush rotation speed is between 100rpm and 120rpm. For more details, please download the catalog.

• Other cutting tools

The civil engineering-related product "Concrete Green Cutting Machine" uses three rotating Φ350 wire brushes to press against the concrete surface with a consistent force, effectively cutting and removing laitance from the joint surface. The pressing force can be adjusted freely according to the age and different types of concrete. It provides uniform joint surface treatment without affecting the unevenness of the joint surface. It features a simple operation method using remote wireless control. Safety devices prevent contact accidents with machinery and other equipment. For more details, please download the catalog.

• Other cutting tools

The civil engineering-related product "Chimney Brick Demolition Machine" inserts a chisel into the gap formed between the RC outer cylinder and the inner cylinder bricks, and through the contraction of four arms, it dismantles the inner cylinder bricks and drops them down into the chimney. There is no need to perform demolition work at high places such as the top of the chimney. It prevents the scattering of pollutants. It allows for the separate demolition of RC and fire-resistant bricks. The demolition period is shortened. For more details, please download the catalog.

• Machinery and equipment installation/dismantling/relocation

The civil engineering-related product "Spiky Hammer" is designed for attachment to heavy machinery. When moved quickly, it digs shallowly, and when moved slowly, it digs deeply. The arm pressing force of the heavy machinery's arm is different from that of a breaker, as it moves while applying light pressure. The KA-70 and RT-68 are handheld models, but they can be efficiently attached to light machinery or forklifts. For more details, please download the catalog.

• Other cutting tools

The steel-related product "Haguchi Coke Sampler" is a device that inserts a steel pipe from the blast furnace's tuyere to collect coke samples from the center of the furnace. All power is supplied by compressed air, and it is equipped with a powerful impact mechanism. The weight is 17,000 kg. The insertion depth is 10,000 mm. The hammer type is KDB-300. The sampler pipe is 250A. The traveling motor is 12 PS. The air consumption is 32 m³/min. For more details, please download the catalog.

• Steel

The steel-related product "Tuyere Raceway Measurement Device" is a device that inserts a cooling pipe from the tuyere section of a blast furnace during operation to measure the depth of the raceway and perform gas sampling. It is operated by electric remote control. The weight is 2,400 kg. The insertion depth is 2,500 mm. The traveling motor is 0.75 KW. The operating power supply is 100 V. The insertion pipe diameter is 48.6 Φ mm. For more details, please download the catalog.

• Steel
• Distance measuring device

The steel-related product "Feather Mouth Replacement Machine" is equipped with a reversible air hammer that performs both pulling and striking operations. By combining a hydraulic jack with the hammer's striking action, it allows for easy pulling and driving of the feather mouth, as well as the extraction of internal cooling pipes. After pulling out the feather mouth, slag removal and internal surface grinding are performed by using a small air hammer that strikes while rotating along the circumference. The hammer is air-driven, and the rotation is powered by hydraulics. For more details, please download the catalog.

• Steel

The steel-related product "Blast Furnace Shaft Sampler" is a device that inserts a triple tube cooled by water into the shaft of the blast furnace, reaching the center of the furnace to sample the temperature and gas inside. The operation is performed via electric remote control, and all movements such as insertion, hammering, extraction, and stopping are powered by compressed air. For more details, please download the catalog.

• Steel
• Thermometer

The steel-related product "Casting Outlet Repair Machine" can be used for stamping caster materials by attaching a tamping pad. Additionally, it can be equipped with a rod to replace the moil point for crushing the entire casting outlet. The weight is 5,000 kg. The lateral range is 600 mm. The vertical feed is 600 mm. For more details, please download the catalog.

• Steel

The steel-related product "Slag Removal Hole Drilling Machine" is designed to be compactly assembled so that all equipment can quickly retreat simultaneously with the molten metal, and it is equipped with heat insulation measures. The installation method and operating position are determined according to the shape of the slag bucket. There is also a method for remote operation. For more details, please download the catalog.

• Steel

The steel-related product "KDB-300 Hammer" exhibits powerful striking force and is used in the sampler of blast furnaces. It is also possible to attach a rotating motor. The weight is 1,600 kg. The total length is 2,000 mm. The cylinder diameter is 300 mm. The piston stroke is 200 mm. The striking frequency is 540 blows/min. For more details, please download the catalog.

• Steel

The steel-related product "KD-1H Hammer" performs both forward and reverse strikes with a single cylinder in its striking mechanism. It weighs 400 kg, has a total length of 1,090 mm, a cylinder diameter of 200 mm, and a piston stroke of 115 mm. The striking frequency is 600 blows/min. For more details, please download the catalog.

• Steel

The steel-related product "KD-1HG Drifter" is a drifter that can perform both crushing and hole drilling operations with a strong impact mechanism. It weighs 560 kg. The total length is 1,420 mm. The cylinder diameter is 200 mm. The piston stroke is 115 mm. The number of blows is 600 blows/min. For more details, please download the catalog.

• Steel

The steel-related product "KD-4 Drifter" has been developed as a drifter for opening the casting outlet and can perform both forward and reverse strikes with a single cylinder. It weighs 350 kg, has an overall length of 1,252 mm, a cylinder diameter of 180 mm, and a piston stroke of 85 mm. The striking frequency is 2,000 blows/min. For more details, please download the catalog.

• Steel

The steel-related product "KD-1SAT Drifter" operates with a separate impact mechanism and rotation. The torque of the rotation motor is large, allowing for the use of large-diameter bits. The weight is 300 kg. The total length is 931 mm. The cylinder diameter is 140 mm. The piston stroke is 90 mm. The impact rate is 1,650 blows/min. For more details, please download the catalog.

• Steel

The spiky hammer is used by attaching it to a hydraulic excavator. It digs shallowly when moving quickly and deeply when moving slowly.

• Adhesive tape
• Crusher

This is the product catalog of Kurita Rock Drill Company, which handles machinery for steelmaking and civil engineering construction.

• drill
• Special Processing Machinery

A rotating Φ350 wire brush with three pieces is pressed against the concrete surface with a constant force to cut and remove the laitance at the joint surface.

• Other processing machines

It is mounted on a hydraulic excavator and operates with the hydraulic system of the shovel. It can be easily attached to heavy machinery that has breaker piping. The dresser can be oriented in any direction using the swivel plate. There is no impact, resulting in low noise and low vibration.

• Other cutting tools