ムソー工業 List of Products and Services

We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.3." Multiple test specimens can be installed simultaneously. The adhesion to the curved surfaces of the test specimens has been improved, and the addition of scales has enhanced visibility during operation. The weight is approximately 6 kg, and it is made of SUS304. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible test specimens - Thickness: 1–3 × Width 15 × Length 125–150 mm - Number of installations: 1–6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously ■ Improved adhesion to the curved surfaces of the test specimens, and enhanced visibility during operation due to the addition of scales *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

We would like to introduce our product, the "Limit Stress Measurement Jig Ver.3.1." This version allows for the installation of multiple test specimens simultaneously and includes a holding plate added to prevent the specimens from floating, which was an issue in Ver.3.0. The weight is approximately 6 kg, and it is made of SUS304 material. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Plate Thickness: 1–3 × Width 15 × Length 125–150 mm ・ Installation Quantity: 1–6 pieces ■ Material: SUS304 ■ Allows for the simultaneous installation of multiple test specimens ■ Type with a holding plate added to prevent specimens from floating, as seen in Ver.3.0 *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

We would like to introduce our "Limit Stress Measurement Jig Ver.3.0." The compatible test specimens are 1-3 mm thick, 15 mm wide, and 125-150 mm long, with an installation quantity of 1-6 pieces. This type allows for multiple test specimens to be installed simultaneously. We also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 6 kg ■ Compatible Test Specimens ・ Thickness: 1-3 mm, Width: 15 mm, Length: 125-150 mm ・ Installation Quantity: 1-6 pieces ■ Material: SUS304 ■ Multiple test specimens can be installed simultaneously *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

We would like to introduce our "Limit Stress Measurement Jig Ver.2.2." The compatible test specimen dimensions are thickness up to 3 mm, width from 22 to 40 mm, and length from 100 to 127 mm, with a setup quantity of 1 unit and a gap of 20 mm between bands. The gap between the bands has been widened for easier observation. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Compatible Test Specimen ・ Thickness: Up to 3 mm, width from 22 to 40 mm, length from 100 to 127 mm ・ Setup Quantity: 1 unit ・ Gap between Bands: 20 mm ■ Material: SUS304 ■ The gap between the bands has been widened for easier observation. *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

We would like to introduce our "Limit Stress Measurement Jig Ver.2.1." The compatible test specimens have a thickness of up to 3 mm, a width of 10 to 40 mm, and a length of 100 to 127 mm, with a setup quantity of 1 piece and a band spacing of 8 mm. We have improved it to allow for band adjustments according to the thickness of the test specimen. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Compatible test specimens ・ Thickness: Up to 3 mm, width 10 to 40 mm, length 100 to 127 mm ・ Setup quantity: 1 piece ・ Band spacing: 8 mm ■ Improved to allow for band adjustments according to the thickness of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

We would like to introduce our "Limit Stress Measurement Jig Ver. 2.0." The material used is SUS304, and the weight is approximately 2 kg. We have made improvements such as integrating the base into a single piece. Additionally, we also accept custom orders for changes in shape and material, so please feel free to consult us when needed. 【Specifications】 ■ Weight: Approximately 2 kg ■ Material: SUS304 ■ Improvements made, such as integrating the base into a single piece *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Testing Equipment and Devices

This is a type of test specimen with a V-shaped groove in a rectangular bar. It can be used for the Charpy impact test. The Charpy impact test involves applying a high-speed impact to the specimen to evaluate the energy required for fracture and the toughness of the specimen.

• Steel
• Processing Contract
• Impact Test

Musou Industrial Co., Ltd. serves as a comprehensive manufacturing partner for universities and research institutions, specializing in the processing of test specimens and the design and production of testing jigs and experimental equipment. Test specimens are materials used for various tests such as bending, pulling, compressing, twisting, and corrosion. Our clients include companies and government agencies that require strength and structural testing for products, buildings, and infrastructure, as well as universities researching new materials. We support the world-renowned Made-in-Japan manufacturing through both conceptualization and production. [Business Activities] ■ Processing of test specimens, design and production of testing jigs and experimental equipment

• Processing Contract

In the processing of test specimens, we have handled a variety of materials. Over the course of more than 60 years of experience, we have developed processing know-how that minimizes the impact on the materials themselves. We are committed to meeting our customers' needs.

• Machining Center

In the processing of test specimens, we have handled a variety of materials. Over the course of more than 60 years of experience, we have developed processing know-how that minimizes the impact on the materials themselves. We are committed to meeting our customers' needs.

• Electric discharge machine

In the processing of test specimens, we have handled a variety of materials. Over the past 60 years, we have developed processing know-how that minimizes the impact on the original properties of the materials. We are committed to meeting our customers' needs.

• Other machine tools