デンカエレクトロン List of Products and Services

We would like to introduce the "ATS Tube" that we handle. It achieves improved electromagnetic wave shielding effects compared to aluminum shield tubes. The electrical resistance value has also reached about half that of aluminum, at 0.04Ω/cm². Additionally, by using a special copper sheet, it is resistant to unwanted radiation and significantly improves the shielding effect. 【Features】 ■ Uses a special copper sheet ■ Significantly improved shielding effect ■ Achieves improved electromagnetic wave shielding effects ■ Electrical resistance value is about half that of aluminum, at 0.04Ω/cm² ■ Grounding installation can be completed in a short time *For more details, please refer to the PDF document or feel free to contact us.

• tube

We would like to introduce our "Fluororesin Spiral Tube/Spiral Tube." The "Fluororesin Spiral Tube" can be easily installed by simply wrapping it around, and it can also be used for securing wires. It is heat-resistant up to 260°C, making it suitable for high-temperature environments. The "Spiral Tube" is a spiral-type tube that is used by wrapping it around, and we also have types that are excellent in weather resistance for long-term outdoor use. Please feel free to contact us if you have any requests. 【Features of Fluororesin Spiral Tube】 ■ Made of super heat-resistant fluororesin for wire protection ■ Used by wrapping it around ■ Can also be used for securing wires ■ Heat-resistant up to 260°C, suitable for high-temperature environments *For more details, please refer to the PDF document or feel free to contact us.

• tube

We would like to introduce the "Shunt Lead/SZF2 Tube" that we handle. The "Shunt Lead" is effective in areas that require flexibility and movement, such as bends and movable parts. There are two types available: one with a single screw hole type (SA) and one with a double screw hole type (SB). The "SZF2 Tube" is a product that complies with UL224 and does not contain brominated flame retardants, chlorine-based flame retardants, PBBS, PBBOS, or PBBES, which are subject to RoHS regulations. It is widely used in various fields such as electronics, communications, and automotive. 【Shunt Lead Features】 ■ Effective in areas that require flexibility and movement, such as bends and movable parts ■ Available in two types: single screw hole type (SA) and double screw hole type (SB) ■ When covered with heat shrink tubing (HOL, SZF2), it reduces impedance *For more details, please refer to the PDF materials or feel free to contact us.

• tube

We would like to introduce the "FL Tube / Enku Tube" that we handle. The "FL Tube" is highly elastic, resistant to cuts and abrasions, and has excellent slip properties, allowing for smooth installation. It is self-extinguishing across the entire series and also has excellent chemical resistance, making it an extremely safe product. The "Enku Tube" is a braided tube with wear resistance, heat resistance, flexibility, and elasticity. It allows for easy drainage and prevents condensation, making it possible to protect components. 【FL Tube Features】 - Highly elastic, resistant to cuts and abrasions, and has excellent slip properties - Allows for smooth installation - Self-extinguishing across the entire series - Excellent chemical resistance - Capable of expanding to more than twice the natural diameter *For more details, please refer to the PDF document or feel free to contact us.

• tube

This catalog features cable glands and wiring accessories from BEISIT. We introduce a variety of products, including "G(PF) screw cable glands," "M screw cable glands," and "M screw long-foot type metal cable glands." In addition to descriptions of raw materials and seals, it also includes images and drawings, making it a useful reference when considering implementation. 【Featured Products (Partial)】 ■ G(PF) screw cable glands ■ G(PF) screw metal cable glands ■ Reinforced type G(PF) screw metal cable glands ■ M screw cable glands ■ M screw long-foot type cable glands *For more details, please refer to the PDF document or feel free to contact us.

• cable
• Other cable related products

The "ETC Tube" is a non-shrink polyolefin tube that does not contain harmful substances such as specific bromine and nitrogen. It can be used for automotive parts, harness insulation, protection and corrosion prevention, and electrolysis prevention. Additionally, we also offer "Vinyl Tubes" that allow for clear printing. 【ETC Tube Features】 ■ Does not contain harmful substances such as specific bromine and nitrogen ■ Suitable for marking, with engraved characters that do not easily fade *For more details, please refer to the PDF materials or feel free to contact us.

• tube

The "End Cap" is designed for terminal protection of power cables and control cables, and is also effective in preventing oxidation from ozone and UV radiation. It is suitable for waterproofing and drip-proofing due to the adhesive on the inside. Additionally, we offer "Yuruman-kun," a heat shrink cap for corrosion protection of bolts that may deteriorate due to rust. 【End Cap Features】 ■ Effective in preventing oxidation from ozone and UV radiation ■ Suitable for drip-proofing due to the hot melt adhesive on the inside ■ Maintains flexibility after adhesion ■ Can be manufactured in sizes over 150mm in diameter *For more details, please refer to the PDF document or feel free to contact us.

• tube

"HOL Tube" is a thick busbar tube made of non-halogenated polyolefin that has undergone special cross-linking treatment. It is used to enhance the insulation characteristics of current switching measures and busbars in substations. Additionally, we offer "HOLT Tape," which is effective in providing electrical insulation and protection from shock for busbars up to 36KV, thanks to its double-layer insulation and high-temperature melting adhesive. 【Features of HOL Tube】 ■ Halogen-free ■ Thick busbar tube ■ Made of non-halogenated polyolefin with special cross-linking treatment ■ High tracking resistance and arc resistance *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "TSCM Tube" is a halogen-free heat shrink tube for insulating busbars. It can be safely used to protect cables from flashover and electrical induction between power switching devices and voltage boxes up to 36KV. Additionally, we also offer a low-voltage, pressure-resistant multi-hole type "TSCL Tube." 【Features of TSCM Tube】 ■ Halogen-free ■ Excellent electronic insulation, anti-tracking, UV resistance, weather resistance, and flame retardancy ■ Hole diameter and number of holes can be customized *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "FTE Tube" is a heat shrink tube with a heat resistance temperature of 260°C. It is designed for use in special environments such as automotive and aerospace. Additionally, we also offer the "HOS Tube," a halogen-free heat shrink tube for insulating busbars. 【FTE Tube Features】 ■ Heat resistance temperature of 260°C ■ Designed for use in special environments such as automotive and aerospace ■ Excellent high-temperature stability, chemical resistance, extreme electrical insulation, and high flame retardancy ■ Available in a user-friendly range of sizes *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "HC175 Tube" is a semi-rigid PVDF heat shrink tube that can withstand temperatures up to 175°C. Not only is it resistant to tears and abrasions, but it is also suitable for insulation protection in environments where chemicals and solvents are used at high temperatures. Additionally, we also offer the "Viton Tube," which is flexible and can withstand temperatures up to 200°C. 【Features of HC175 Tube】 ■ Excellent heat resistance and flame retardancy, with chemical resistance ■ Suitable for insulation protection in environments where chemicals and solvents are used at high temperatures ■ Protects joints, end parts, and more from industrial fuels, solvents, and chemicals *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Spiral Fit Tube" is a heat source-free, room temperature shrink tube that naturally begins to contract when the core inside the tube is pulled out. There is no need to apply heat with a heat gun or any other means, allowing for quick and safe use in any location. Additionally, we offer the "HC150 Tube," which is excellent in heat resistance and flame retardancy, as well as chemical resistance, protecting the internal wires from industrial fuels, solvents, and chemicals. 【Features of the Spiral Fit Tube】 ■ Heat source-free room temperature shrink ■ Naturally begins to contract when the core inside the tube is pulled out ■ Adaptable to a wide range of cable sizes *For more details, please refer to the PDF document or feel free to contact us.

• tube

"Rokuichi Tube" is a flexible heat shrink tube that shrinks at a ratio of 6:1, manufactured through co-extrusion of polyolefin resin and hot melt adhesive. It provides excellent insulation and is suitable for moisture resistance enhancement. Additionally, we also offer a "room temperature shrinkable tube" that naturally begins to shrink when the core inside the tube is pulled out. 【Rokuichi Tube Features】 ■ Shrinks at a ratio of 6:1 ■ Manufactured through co-extrusion of polyolefin resin and hot melt adhesive ■ Provides excellent insulation and is suitable for moisture resistance enhancement *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Sanichi Tube" is a shrink tube manufactured through co-extrusion of polyolefin resin and hot melt adhesive. It provides excellent insulation and is suitable for enhanced waterproofing. Additionally, we also offer the "Yoniichi Tube," which shrinks at a ratio of 4:1 and is widely used in applications such as marine cables and automatic control devices. 【Sanichi Tube Features】 ■ Shrinks at a ratio of 3:1 ■ Provides excellent insulation and is suitable for enhanced waterproofing *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "SZF3 Tube" is a thin and flexible heat shrink tube. It is suitable for use in areas where quick shrinkage is desired or in narrow spaces. Additionally, we also offer the "CCS Tube," which is flame-retardant, chemical-resistant, weather-resistant, and begins to shrink at low temperatures. 【Features of SZF3 Tube】 ■ Thin and flexible heat shrink tube ■ Low shrinkage starting temperature ■ Available in colors other than just black and white ■ Printing on the tube is also possible *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Earth Tube" is a flame-retardant, soft, heat-shrinkable tube for grounding applications. The two-color combination of yellow and green is the standard grounding color in Europe, produced through co-extrusion rather than painting, making it resistant to abrasion. Additionally, we offer the "THT Tube," which has a glossy surface and can be used in many automotive parts, small devices, and household items. 【Earth Tube Features】 ■ Resistant to abrasion due to co-extrusion manufacturing ■ Simplifies inventory management of wire materials, leading to cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "SZF2 Tube Color" is a product that complies with UL224 and does not contain brominated or chlorinated flame retardants that fall under RoHS regulations, nor does it contain PBBS, PBBOS, or PBBES. It is widely used in various fields such as electronics, communications, and automotive. Additionally, we also offer the "SETC Tube," which is suitable for marking and is a heat-shrinkable tube. 【Features of SZF2 Tube Color】 ■ Complies with UL224 ■ Engraved characters do not easily fade ■ Custom-made colors and sizes, as well as printing (marking) services, are available ■ Large diameter sizes are also available *For more details, please refer to the PDF materials or feel free to contact us.

• tube

The "Noise Clip" is a product that securely fixes wires while simultaneously grounding conductive noise to enclosures and other surfaces. It has both grounding and filtering functions, and since it is not made of metal, it releases heat instead of trapping it. Additionally, we offer the "Easy Lock Ferrite," which comes in a split sleeve type core with a resin case that can be installed with a single touch. 【Noise Clip Features】 ■ Has both grounding and filtering functions ■ Releases heat instead of trapping it ■ The edges are rounded to prevent damage to wires ■ Molded to be close to a perfect circle to prevent wire pinching ■ Notches are added around the screw holes to improve fitting *For more details, please refer to the PDF document or feel free to contact us.

• EMC countermeasure products

The "FLA Tube" is a product that combines bendable aluminum foil with highly heat-resistant fiberglass. It can be easily cut with scissors and can also be bent. Additionally, we offer "copper foil tape," which exhibits high conductivity by wrapping or adhering shielded copper foil. 【FLA Tube Features】 ■ Can be easily cut with scissors ■ Can be bent ■ High thermal insulation effect ■ Excellent shielding effect ■ Can also be used to prevent contact with pipes and to prevent burns *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "TRST Tube" is a rail-type shielded tube. By using a special copper sheet, it is highly resistant to unwanted radiation and significantly improves shielding effectiveness. Additionally, we also offer the hook-button type copper foil shielded tube "FKS Tube." 【Features of TRST Tube】 ■ Achieves improved electromagnetic wave shielding effectiveness ■ Achieves an electrical resistance value of about half that of aluminum at 0.04Ω/cm² ■ Prevents forgetting to close ■ Easy to open and close the tube with bare hands ■ No special tools required ■ Suitable for clean rooms *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "ATSF Tube" is a shielded copper foil tube with double-sided tape. It is suitable for areas that do not require opening and closing, and is designed for low cost. Additionally, we also offer the "TRS Tube," a rail-type shielded tube that enhances electromagnetic wave shielding effectiveness. 【Features of ATSF Tube】 ■ Double-sided tape type shielded copper foil tube ■ Suitable for areas that do not require opening and closing ■ Soldering is very easy ■ Grounding can be completed in a short time ■ Special copper foil is used for noise countermeasures, providing significant effectiveness against unwanted radiation ■ Can also be used in cap type *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "FLS Tube" is a product made by wrapping tin-plated copper foil around heat-resistant polyester thread and braiding it. It is thinner and more flexible than shields made with copper foil and is suitable for shielding wiring used in bending and movable parts. Additionally, we also offer the "FLSS Tube," which is braided with stainless steel thread and can withstand heavy-duty use. 【FLS Tube Features】 ■ Braided with tin-plated copper foil wrapped around heat-resistant polyester thread ■ Thinner and more flexible than shields made with copper foil ■ Approximately twice the shrinkage capability, allowing for post-insertion of wire ■ Solderable *For more details, please refer to the PDF materials or feel free to contact us.

• tube

The "Grounding Code" has no protrusions (whiskers) from the core wire due to a special manufacturing method. It is effective in areas where high voltage and high frequency occur. Additionally, the material consists of tin-plated soft copper wire combined with crimp terminals. 【Features】 ■ No protrusions (whiskers) from the core wire due to special manufacturing ■ Effective in areas where high voltage and high frequency occur ■ Flexible and usable in narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "UL Vinyl Tube" is a product made according to UL and CSA standards. It is a tube for electrical insulation that excels in heat resistance and flame retardancy. We also offer a special PVC "Ribbon Tube" with a natural oval shape at the cut end. 【Features of UL Vinyl Tube】 ■ Made according to UL and CSA standards ■ A tube for electrical insulation that excels in heat resistance and flame retardancy ■ UL number printed on the tube body ■ Custom printing of specified characters is also possible ■ Color changes can be made from just one roll *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "corrugated tube" is a product that protects wires and allows for the organization of computer wiring. The standard product has slits along the length, making it easy to store wires. Additionally, we also offer an "outdoor corrugated tube (with slits)" that excels in abrasion resistance and chemical resistance. 【Features of the Corrugated Tube】 ■ Protects wires ■ Allows for organization of computer wiring ■ Custom colors can also be produced *For more details, please refer to the PDF document or feel free to contact us.

• tube

The 'FL-FR Tube' handled by Denka Electron Corporation is highly elastic, resistant to cuts and abrasions, and has a smooth surface for easy application. It is a sleeve that has obtained the VW-1 standard, with a temperature range of -70 to 125°C. Additionally, we offer the "FL Tube Color," which is stretchable and available in a total of 9 color variations. 【Specifications】 ■ Material: Polyethylene Terephthalate ■ Temperature Range: -70 to 125°C ■ Melting Point: 250°C ■ Standard: UL VW-1 ■ Standard Color: Black *For more details, please refer to the PDF document or feel free to contact us.

• tube

"NFL Tube" is a special type of braided tube that is resistant to fraying and allows for speedy protective bundling without the need for a dedicated cutter, making it suitable for use in any location. The cut ends are resistant to fraying without the need for thermal welding, maintaining a clean appearance at the cut. Additionally, we offer the "FLM-FR Tube," which can be widely used for applications such as aircraft wiring and audio and lighting cables used in concerts. 【Features】 ■ No dedicated cutter required for speedy protective bundling ■ Cut ends are resistant to fraying without thermal welding ■ Excellent abrasion resistance, chemical resistance, and weather resistance, providing high stability ■ Elasticity is twice that of the natural diameter *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "FLR Tube" is a product that can be opened and closed with Velcro, allowing for easy insertion from the back. It is suitable for bundling and protecting equipment with fixed ends. Additionally, we also offer the "FLN Tube," which can be easily used without unraveling even when cut with scissors. 【Features】 ■ Open and close with Velcro, allowing for easy insertion from the back ■ Suitable for bundling and protecting equipment with fixed ends ■ Stretchability is more than twice the natural diameter *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "FLH Tube" is a heat-resistant braided tube with excellent self-extinguishing properties. It is highly elastic, resistant to tears and abrasions, and has a smooth surface for easy installation. Additionally, we also offer the "FLW Tube," which is extremely wear-resistant and suitable for protecting wires and hoses in outdoor environments. 【Features】 ■ Highly elastic and resistant to tears and abrasions ■ Heat-resistant design considering use at high temperatures ■ Braided tube that meets the FAR25 and UL VW-1 standards set by the Federal Aviation Administration *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "FLJX Tube" is a wear-resistant flat knitted sleeve made from 66 nylon, suitable for outdoor use. It protects the tube from flying gravel and stones. Additionally, we also offer the "FLG Tube," which is coated with a silicone membrane, and the "FLAWS Tube," which is covered with aluminum foil and fiberglass. 【Specifications】 ■ Material: Polyamide (66 nylon) ■ Operating temperature range: -60 to 160℃ ■ Melting point: 256℃ ■ Standard: VW-1 ■ Color: Black *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "RBW Tube" is a product that can withstand temperatures up to 200°C and is resistant to flames and sparks, making it suitable for welding hoses. It also excels in abrasion resistance, widely used in the moving parts of welding machines. Additionally, we offer the "DM Tube," which is strong against impact and friction, allowing for rear loading of wire materials, and the "Protective Tube for Hydraulic Hoses," which is woven with nylon threads for excellent flexibility and is ideal for protecting hydraulic hoses. 【Specifications】 ■Material: Fiberglass ■Temperature Range: -40 to 204°C ■Color: Black *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Protective Tube for Hydraulic Hoses with Rear Insertion" is a product that can be easily installed on-site with a strong hook-and-loop fastener. It allows for installation over springs and can bundle multiple hoses together. Additionally, we offer the "TR Tube," which can be easily opened and closed without tools and is effective for use over long distances. 【Features】 ■ Strong hook-and-loop fastener for easy opening and closing ■ Flexible sleeve made from braided nylon thread ■ Can be installed over springs and bundle multiple hoses ■ The fine weave prevents gaps, preventing the rupture of hydraulic oil ■ Excellent durability, weather resistance, heat resistance, chemical resistance, flame retardancy, and abrasion resistance *For more details, please refer to the PDF document or feel free to contact us.

• tube

"MR Tube" is a protective tube with a Velcro type that is used to wrap around cables. It contains polyester fabric within the sheet, making it resistant to tearing. Additionally, we also offer the "HB Tube," which opens and closes with a snap fastener, reducing the likelihood of static electricity. 【Features】 ■ Velcro type, so no special tools are required ■ Contains polyester fabric within the sheet, making it resistant to tearing ■ Easy to install simply by wrapping it around *For more details, please refer to the PDF document or feel free to contact us.

• tube

The "Super Dryer" handled by Denka Electron Co., Ltd. is a heat shrink dryer suitable for peeling stickers and molding processes such as FRP. It can be used with four types of nozzles according to your needs. The output can be adjusted in two stages, reaching up to approximately 500°C. Additionally, we offer "DK Cable Ties" in a black type that is weather-resistant, adaptable to various needs. 【Features】 ■ Equipped with a liquid crystal display ■ Comes with a dedicated case ■ Reliable after-sales service ■ Four types of attachments included *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

Denka Electron Corporation offers "Ultra High-Temperature Cable Ties" with a heat resistance of 180°C. They are effective in areas around furnaces and heaters where high temperatures occur. We also offer "Metal Sensor Detectable Ties" made from a material mixed with metal powder. 【Specifications】 ■ Material: 46 Nylon ■ Standard: UL94 V-0 ■ Operating Temperature Range: -40°C to 180°C ■ Standard Color: Melon Green *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "DX Solar Band" is a tie band suitable for the installation of solar panels. It securely holds cables in place for a long time, even on solar panel frames exposed to rain and wind. Additionally, we offer a tie band with excellent durability and non-degradability called "Releasable Tie." 【Features】 ■ Securely holds cables in place for a long time ■ Resistant to corrosion products such as zinc chloride, calcium chloride, and sodium chloride ■ Usable in mega solar installations in coastal areas, salt fields, and snow-prone regions *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Cable Wrap Belt" is a hook-and-loop belt that features an arrowhead type design, allowing for easy one-touch removal and the ability to detach bindings. It is available in a total of 10 colors, and lengths of 300mm can also be produced. Additionally, we offer a "stainless band" that can be used in various environments. 【Features】 ■ Arrowhead type ■ Easy one-touch removal ■ Detachable bindings *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Stainless Steel Band (Plastic Coating)" is a tie band that can be used in various environments. Made of stainless steel, it has strong strength and excellent resistance to acids, chemicals, and impacts, making it suitable for use in harsh environments, including indoor and outdoor settings, underground facilities, and underwater. Additionally, we offer a "Super Heat-Resistant Tie Band Fastener" that can be used in conjunction with the EXH tie band. 【Features】 ■ Strong strength, excellent resistance to acids, chemicals, and impacts ■ Locks easily even with a 1mm tip ■ The plastic coating prevents damage to the wire material when tied ■ Customizable length *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

At Denka Electron Co., Ltd., we handle recyclable "screw-type cable tie fasteners." We offer a variety of types, from space-saving models to those that can secure large amounts of wire. Additionally, we have "adhesive fasteners" that allow cable ties to be inserted from four directions, enabling secure fastening without worrying about orientation. 【Features】 ■ Can be screwed in for stronger fixation within panels ■ Custom orders available through injection molding ■ Production possible with 46 nylon or fluoropolymer materials *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Nylon Clip" handled by Denka Electron Co., Ltd. is molded to be close to a perfect circle, so it does not pinch the wire. The edges are processed with a rounded finish to avoid damaging the wire, making it resistant to impact and protecting the wire from deformation and breakage, while being strong, lightweight, and flexible. Additionally, we also offer a "Super Heat-Resistant Clip" that securely holds cables and wiring even in high-temperature environments. 【Features】 ■ Molded to be close to a perfect circle ■ Rounded edges ■ Notched on the inside around the screw hole for better engagement *For more details, please refer to the PDF materials or feel free to contact us.

• Other cable related products

The "Best Sticker" handled by Denka Electron Co., Ltd. features a sponge-like insulator on the wire holding part, which holds the wire without damaging its coating. With the dry edge function, the release paper is easy to peel off, and it has a strong adhesive power that ensures excellent durability. Additionally, we also offer the "Flat Cable Clamp for Optical Cables (with Sponge)" that gently holds and secures flat cables without causing damage. 【Features】 ■ Easy to peel off the release paper with the dry edge function ■ Excellent durability with strong adhesive power ■ Gray color that does not show dirt easily ■ Minimizes scratches on cables and other objects *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "One-Touch Cable Gland" is a product that can be installed simply by pushing it in, without the need for a mounting nut. After installation, there is no need to adjust the nut; just pass the cable through and tighten the sealing nut to complete the task. We also offer a "Nylon Cable Gland" that allows for quick and secure tightening of wires by hand. 【Features】 ■ No mounting nut required ■ No adjustment of the nut needed after installation *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "Soft Edging" handled by Denka Electron Corporation is extremely soft and can accommodate curved areas. It has a wide range of applicable panel thicknesses for each size, allowing one item to cover a certain range of sizes. Additionally, we also offer "Edge Guard" to address the trend of thinner board thickness. 【Features】 ■ Wide compatibility from 0.6 to 6.4mm ■ One item can cover a certain range of sizes ■ Can accommodate curved areas ■ No adhesive is required at all *For more details, please refer to the PDF materials or feel free to contact us.

• cable

We offer marking services for PVC tubes. We can accommodate inner diameters from 2 to 5 mm and can produce from a single piece. Please request this service along with your drawings for large projects such as wiring in shipbuilding and plant construction. Additionally, we provide a marking service for display bands with specified printing on flag-tied cable ties. 【Mark Tube Features】 ■ Compatible with inner diameters from 2 mm to 50 mm ■ Can be produced from a single piece ■ Two-line printing available ■ Production possible with a complete set of drawings or in decimal and hexadecimal formats ■ Supports alphanumeric characters, hiragana, and kanji *For more details, please refer to the PDF materials or feel free to contact us.

• tube