ハンナインスツルメンツ・ジャパン Product Lineup

The "HI 2600-01" is a tabletop pH kit designed for measuring pH/ORP, EC (conductivity, TDS, salinity), and dissolved oxygen (DO)/temperature. It features a "Basic" mode for routine measurements and a "Standard" mode that allows for calibration diagnostics and log management. It is suitable for laboratories, manufacturing, and quality control environments where accuracy and reproducibility are essential. It supports USB-C type connections, enabling smooth data management through charging, PC connection, and USB memory. 【Features】 ■ Simple interface for both connection and operation ■ Stable measurements with an electrode holder ■ pH electrode equipped with Hanna's unique CAL Check function ■ Data management compatible with GLP, logging, and CSV output ■ 11 types of pH electrodes tailored to specific purposes *For more details, please refer to the related links or feel free to contact us.

• pH meter
• Conductivity Meter
• Dissolved Oxygen Meter

The "HI 932" is an automatic potentiometric titrator that allows for 2-channel measurement and can connect to an auto-sampler. Thanks to Hanna's unique burette system (clip lock), the exchange of titrant and reagent can be done in just a few seconds. In addition to the standard 25mL burette, 5mL, 10mL, and 50mL burettes can also be attached. The 5.7-inch backlit color display with good visibility makes the titration curve even easier to read. 【Features】 ■ Higher precision and accuracy compared to manual titration ■ Capable of reverse titration and continuous titration ■ Adding a second burette and pump further enhances analysis efficiency ■ Convenient data management, with the ability to store 100 data points in the main unit and easily import via USB *For more details, please refer to the related links or feel free to contact us.

• Electrotitrator

The "HI 930" is an automatic potentiometric titrator that can be used for automatic potentiometric titration and research-level pH/mV measurements, featuring high accuracy, flexibility, and reproducibility. It supports various types of potentiometric titrations, achieving both excellent results and speedy analysis. Its compact design saves space, and the main unit is made of sturdy, chemical-resistant resin. Additionally, the electrode holder can accommodate up to three electrodes, four tubes, and one temperature sensor, making it easy to handle even small sample sizes. 【Features】 ■ Supports a wide range of titration modes, including standardized, fixed pH/mV, and equivalence point detection (1st/2nd derivative) ■ Built-in magnetic stirrer in the main unit for space-saving design ■ mV: -2000.0 to 2000.0 mV (resolution 0.1 mV), pH: -2.000 to 20.000 pH (resolution 0.001 pH) ■ Temperature: -5.0 to 105℃ (resolution 0.1℃), compatible with ATC/manual correction ■ Stores 15 methods and 50 reports, with data management via USB *For more details, please download the PDF or feel free to contact us.

• Electrotitrator

We offer the portable EC/TDS/resistivity/salinity/temperature meter 'HI 98197', which is capable of measuring ultra-pure water. The saved data can be transferred to a PC via a micro USB cable by downloading free software. Additionally, the carrying case, which can store standard solutions, is designed to be sturdy and compact with a thickness of 85mm. 【Features】 <Desktop-level accuracy and performance> ■ Flow cell for measuring ultra-pure water is included as standard ■ Measurement functions based on USP <645> (United States Pharmacopeia) standards ■ Suitable for general use (measurement range up to 400 mS/cm) ■ Hold function that automatically freezes the reading when stable ■ GLP function to check the previous calibration information *For more details, please refer to the related links or feel free to contact us.

• Moisture Measuring Device

We would like to introduce the Karl Fischer moisture meter 'HI 933' that we handle. It automatically adjusts by calculating excess residual moisture and surrounding humidity, maintaining a state that allows for accurate measurements at all times. Measurements begin after calculating the moisture values for each stage. Additionally, the 5.7-inch backlit color display with good visibility makes the titration curve even easier to see compared to conventional models. The operation buttons are also sealed as part of the display, making them resistant to dirt and easy to clean. 【Features】 ■ Automatic checks for each multi-stage before measurement ■ Endpoint detection method ■ Easy to see and use ■ Sealed solvent system ■ Connection with peripheral devices *For more details, please refer to the related links or feel free to contact us.

• Moisture Measuring Device

We offer the multi-parameter spectrophotometer 'HI 83399', suitable for measuring COD, total nitrogen, total phosphorus, fluoride, hexavalent chromium, ozone, and more. This device is ideal for those conducting water quality tests and environmental surveys of wastewater in-house. It is perfect for on-site measurements at the time of testing. Despite its compact size, comparable to A5, it achieves overwhelming cost performance. It also includes a validator for wavelength verification, allowing for reliability checks on-site. 【Features】 ■ Adopts an advanced optical system for high accuracy and stability ■ Uses potassium dichromate reagent for COD measurement ■ Equipped with a new absorbance mode ・ Allows users to create a calibration curve with any concentration and absorbance using their own solutions for sample measurements ・ Units can be selected as Abs, with wavelengths available at 420, 466, 525, 575, and 610 nm *For more details, please refer to the related links or feel free to contact us.

• Ion Measurement

We offer the test tube heater 'HI 839800' that can heat up to 25 test tubes simultaneously. It comes with a countdown timer and a plastic cover protector, allowing for heating in as little as 15 minutes, making it efficient for COD/chemical oxygen demand and other measurements. The heater has three temperature programs, and custom settings are also available. 【Specifications (partial)】 ■ Set temperature: 30℃ to 170℃ ■ Temperature stability: ±0.5℃ ■ Accuracy: ±2℃ ■ Capacity: 25 vials (diameter 16mm × length 100mm) ■ Warm-up time: 10 to 15 minutes (depending on set temperature) *For more details, please refer to the related links or feel free to contact us.

• Heater

We would like to introduce the portable low-concentration hexavalent chromium measuring device (for freshwater) 'HI 97749' that we handle. The dedicated reagents used for measurement can be selected according to the frequency of measurement. The device can also be verified and calibrated using a validator (standard solution set). Additionally, it adopts an advanced optical system that incorporates the same beam splitter as the multi-parameter tabletop spectrophotometer HI 833 series, enhancing reproducibility and stability. 【Features】 ■ Hanna's unique verification and calibration functions ■ Advanced optical system ■ Waterproof & data storage ■ User-friendly compact size *For more details, please refer to the related links or feel free to contact us.

• Ion Measurement

We would like to introduce the portable COD meter (COD chromium) 'HI 97106' that we handle. It adopts an advanced optical system that incorporates the same beam splitter as the multi-parameter tabletop spectrophotometer HI 833 series, enhancing reproducibility and stability. Additionally, the main body case has a waterproof function rated at IP67, and the insertion part for the glass cell uses a plastic holder. Compared to the conventional HI 96 series, the waterproofing and durability have been improved, providing peace of mind. 【Features】 ■ Significantly reduced heating time ■ Advanced optical system ■ Waterproof & data storage ■ User-friendly compact size ■ Hanna's unique verification function *For more details, please refer to the related links or feel free to contact us.

• Ion Measurement

Our "EC Mini Controller (Indicator Adjuster)" is a type of product designed to be incorporated into devices for the purpose of continuously managing EC (electrical conductivity). It connects to pumps and control devices, sending signals when the measured value falls below the set point (BL 983317-1, BL 983317-2) or exceeds it (BL 983327-1). Additionally, it is compact and does not require much installation space. 【Specifications (Excerpt)】 ■ Measurement Range: 0.00 to 10.00 mS/cm (Detection Unit: 0.01 mS/cm) ■ Accuracy: ±2% F.S. ■ Noise Error: ±2% F.S. ■ Temperature Compensation: Automatic: 5 to 50℃, β = 2%/℃ ■ Calibration: Manual 1-point calibration *For more details, please refer to the related links or feel free to contact us.

• controller

Our "pH Mini Controller HI 931700" is a type of product designed to be integrated into equipment for the purpose of continuously managing pH levels. It connects to pumps and control devices, sending signals when the pH level falls below or exceeds the set point. With this single unit, you can set the output signals for both the upper and lower set points, making it suitable for a wide range of applications. Its compact size also means it does not require much installation space. 【Features】 ■ Outputs 4–20mA ■ Functions such as overtime control and hysteresis setting *For more details, please refer to the related links or feel free to contact us.

• controller

Our "pH and EC Transmitter" is a panel-mounted type that directly receives signals from the connected pH sensor (HI 1001) and EC sensor (HI 3001). The output signals are compatible with 4-20mA, 0-1V, and 0-4V. It is mainly used in agricultural fields as part of nutrient management systems. It is also possible to customize the pH sensor to a soil insertion type. Please feel free to contact us if you have any inquiries. 【Specifications (Excerpt)】 ■Model Number: HI 98143 ■Product Name: pH and EC Transmitter ■Measurement Range: pH: 0-14pH, EC: 0-10mS/cm ■Accuracy: pH: ±0.5% F.S., EC: ±2% F.S. ■Noise Error: pH: ±2% F.S., EC: ±2% F.S. *For more details, please refer to the related links or feel free to contact us.

• Transformers

Our "EC Controller" reduces electrical noise caused by high humidity environments, enabling reliable measurements. The screen displays EC and temperature simultaneously. The color of the screen changes to green, yellow, red, or flashing red depending on the control status, allowing for easy status checks from a distance. Additionally, when used in conjunction with the sibling model pH Controller (HI 981412), it aids in the simultaneous management of EC and pH. It is also recommended for replacing existing controllers. 【Features】 ■ Compact yet easy-to-read and understand screen display ■ Excellent pump control for nutrient management ■ Long-lasting, low-maintenance brushless motor ■ EC electrode and quick DIN connector *For more details, please refer to the related links or feel free to contact us.

• controller

Our "pH Controller" features a compact design while incorporating a high-performance process controller and dosing pump, achieving excellent cost performance. When used in conjunction with its sibling model, the EC Controller (HI 981413), it is helpful for simultaneous management of pH and EC. It is also recommended for replacing existing controllers. 【Features】 ■ Compact yet easy-to-read and understand screen display ■ Excellent pump control for nutrient solution management ■ Long-lasting, low-maintenance brushless motor ■ pH electrode and quick DIN connector *For more details, please refer to the related links or feel free to contact us.

• controller

COD (Chemical Oxygen Demand) refers to the degree of pollution caused by organic matter (contaminants) in marine and lake environments, represented by a numerical value. A higher COD indicates a greater amount of organic matter (contaminants) in the water, meaning that there are more substances that readily react with oxygen present. BOD (Biochemical Oxygen Demand) is often confused with COD. While both are indicators of water pollution, there are key differences: COD: Represents the degree of pollution in lakes and marine areas, measured using oxidizing agents. BOD: Represents the degree of pollution in rivers, measuring the amount of oxygen consumed by microorganisms over five days. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.

• Water quality testing

As the movement to reuse domestic wastewater (gray water) for planting and irrigation spreads, regular monitoring of pH and EC (electrical conductivity) has become a key factor influencing the reliability of wastewater treatment. This article introduces the importance of pH and EC as indicators of wastewater quality management, along with actual measurement examples. Domestic wastewater refers to the portion of water discharged from households, excluding toilet water (such as from kitchens, sinks, showers, and laundry), and is referred to as "gray water" overseas. It is said to account for 50-80% of household wastewater, and if reused, it has been reported that the amount of drinking water used could be reduced by up to 50%. *For more details on the column, please refer to the related links. Feel free to contact us for more information.

• Water quality testing

COD (Chemical Oxygen Demand) is a measure used to assess the degree of water pollution, and with the increasing environmental awareness nowadays, measuring COD is important. On the other hand, BOD (Biochemical Oxygen Demand) is also an indicator that should be pursued, but it has the drawback of requiring a 5-day incubation period for measurement. Let's also look into whether COD can be used as a substitute for BOD. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.*

• Water quality testing

In Japanese plating factories (such as nickel, zinc, and chrome), compliance with wastewater standards based on the Water Pollution Prevention Act is required, and in recent years, reducing water usage and wastewater load has become important from both environmental and cost perspectives. Against this backdrop, counterflow multi-stage rinsing (counterflow cleaning/multi-stage rinsing) has been widely adopted as it can achieve both cleaning efficiency and water conservation. Counterflow multi-stage rinsing involves connecting multiple rinse tanks in series, where new water introduced into the last tank flows sequentially to the preceding stages. This mechanism ensures that parts are cleaned with the most purified water at the end of the process. As a result, it can significantly reduce water usage and wastewater volume while maintaining equivalent cleaning quality compared to traditional single rinsing or continuous spraying methods. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.

• pH meter
• Other water quality analysis

The "HI520" is a water quality monitoring controller that can accommodate many applications requiring monitoring and control of pH, ORP, EC (salinity), DO (dissolved oxygen), and turbidity. It is an advanced universal process controller that features digital electrode input capabilities, automatically recognizing measurement items. Additionally, it supports dual channels. 【Features】 ■ Modbus/RS485 compatible ■ Up to 5 relay contacts ■ Fluorescent DO sensor *For more details, please download the PDF or feel free to contact us.

• Water quality testing

The fluorescent type is equipped with a smart cap, making maintenance easy! There is no need for warm-up, so measurements can be taken immediately after turning on the power. Since it does not consume oxygen during measurement, it can measure up to 50 mg/L even without flow rate. It can manually save up to 4000 data points, and transfer to USB memory or PC is also possible. (Displayed in CSV format on PC) It enables quick and stable measurements in various environments.

• Water quality testing

The Marine Master HI 97115 is a portable spectrophotometer that combines accuracy and ease of use. It achieves high precision and reliability through an advanced optical system, and is designed to be compact. It is truly a design that condenses technology. For aquaculture and aquariums, it can measure ammonia, nitrite nitrogen, nitrate, pH, alkalinity, calcium, magnesium, and phosphate all with this one device (reagents are used for each measurement item). - Advanced optical system featuring a beam splitter - Validation of the device using a NIST-traceable validator - Navigation function for measurement procedures - Automatic data storage function for up to 200 data points - Ability to assign locations to stored measurement data - Waterproof casing with an IP67 rating (the glass cell insertion part is also waterproof) - Backlight function for better visibility - Battery level (%) is always displayed on the screen - Time setting available (year, month, day, and time) Rental use is also available!

• Analytical Equipment and Devices

It is an excellent device that allows simultaneous measurement by connecting a pH/ORP sensor, EC sensor, and DO sensor to a single electrode. It is a robust waterproof type suitable for outdoor use, and measurements are taken by submerging the electrode. The measurement values can be continuously stored in the main unit, and data management can be performed by connecting it to a PC. This single unit can measure pH/ORP/EC/TDS/resistivity/salinity/specific gravity of seawater/DO/atmospheric pressure/°C.

• Analytical Equipment and Devices

1. Automatic checks for each stage before measurement Calculates and automatically adjusts for excess residual moisture and surrounding humidity. Maintains a state that allows for accurate measurements at all times. Measurement begins after calculating the moisture values for each stage. 2. Endpoint detection method In addition to the conventional mV endpoint method, there is also a unique relative drift endpoint function. 3. Easy to see and use The visibility has improved with a 5.7-inch backlit color display, making the titration curve even easier to read compared to previous models. The operation buttons are also part of the display and are sealed, making them resistant to dirt and easy to clean. 4. Sealed solvent system Minimizes exposure to surrounding humidity, saving on titrant consumption and time. Additionally, it automatically adjusts titration calculations considering the influence of surrounding humidity entering the titration cell. This allows for the correction of water not present in the actual sample, resulting in more accurate results.

• Water quality testing
• Food Testing/Analysis/Measuring Equipment

Self-inspection and cross-check for total water quality regulation! A spectrophotometer suitable for wastewater testing and environmental surveys, measuring total nitrogen, total phosphorus, COD (chemical oxygen demand), and more. This device is ideal for those conducting their own wastewater quality tests. It supports a total of 10 items (20 methods), including total nitrogen, total phosphorus, COD, ammonia nitrogen, residual chlorine, nitrite nitrogen, nitrate nitrogen, and nitrite. The installation space is very compact, about the size of A5! It also includes a validator for wavelength verification, allowing for reliability checks on-site. It features overwhelming cost performance as well. Rental use is also available!

• Analytical Equipment and Devices
• Other environmental analysis equipment
• Water quality testing

In addition to potentiometric titration, it supports measurements of pH, mV, ORP, and ISE (Ion Selective Electrode). It is recommended not only for those conducting manual titrations but also for those considering a replacement. It is useful for managing salt content in food, acidity in drinking water, salt and acid content in seasonings, concentration management of plating solutions, and other neutralization titrations! - Higher precision and accuracy compared to manual titration - Adding a second burette further enhances analysis efficiency. - Data management is convenient. The main unit can store 100 data points and can easily import data via USB.

• Other physicochemical equipment
• Analytical Equipment and Devices

It is used in medical schools across the country. These products are suitable for various research fields such as nursing, pharmacotherapy, and infectious diseases. It is an innovative pH meter in the field of water quality measurement that achieves high accuracy as a tabletop model while being low-priced. Users have provided feedback such as: - Easy to operate - Portable and versatile - Good design

• Other physicochemical equipment
• Environmental Test Equipment
• Water quality testing

We will create new value in the field of water quality measurement in terms of "design," "usability," "performance," and "price."

• Other measurement, recording and measuring instruments
• Environmental Test Equipment
• Water quality testing

We will create new value in the field of water quality measurement in terms of "design," "usability," "performance," and "price."

• Environmental Test Equipment
• Water quality testing
• Other inspection equipment and devices

We will create new value in the field of water quality measurement in terms of "design," "usability," "performance," and "price."

• Other physicochemical equipment
• Environmental Test Equipment
• Water quality testing

This is a digital measuring device that replaces reagent kits. Since it is not a visual inspection, the same results can be obtained regardless of who performs the measurement. It is also palm-sized, making it easy to carry on-site. There is only one operation button, making it very easy to use. High-precision measurements have become surprisingly accessible at an amazing price.

• Other measurement, recording and measuring instruments
• Water quality testing