関西電熱 List of Products and Services

The "SA Series" is a T.S.K heat exchanger that achieves energy savings through the effective utilization of exhaust heat. It recovers an average of 60% of exhaust heat from heating, combustion, and drying equipment using electricity, steam, gas, or kerosene as heat sources. (SAC Series: Copper specification for heat exchange elements) It solves problems such as "exhaust heat contains explosive solvents and a lot of water vapor, so hot air circulation is not possible" and "I want to increase the thermal capacity a bit more." 【Features】 ■ Two types are available: a 'copper' specification with sterilizing effects and high thermal conductivity, and a 'stainless steel' specification with high corrosion resistance. ■ A slim type that can be installed in any orientation (except upside down) with low pressure loss, eliminating the need for an additional dedicated blower, making it a low-cost, energy-saving option. *For more details, please download the PDF or contact us.

• Heat exchanger

The "SUS125 type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices to dry while draining water from the rinsing tank (finishing tank). It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. This can significantly reduce the electricity consumption of the air supply generation device. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for water drainage and drying after washing steel plates, draining after washing sheets, and removing polishing powder after glass polishing. 【Features】 - Made of stainless steel - Achieves high airspeed with low pressure loss - Significantly reduces electricity consumption - Provides uniform high performance across the entire slit - Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

• nozzle
• Drying Equipment and Devices

The "100SUS Type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices for simultaneous water drainage and drying after the rinsing tank (finishing tank). The slit width can be easily adjusted, and if there is any disturbance in the blowing wind speed, the issue can be resolved on the spot by adjusting the slit width. Additionally, the blowing angle can also be easily adjusted. It is mainly used for sorting good and defective products, such as food. 【Features】 ■ Made of stainless steel ■ Achieves high wind speed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

• nozzle
• Drying Equipment and Devices

The "75SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinse tank (finishing tank) incorporated into the cleaning device. It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. The electricity consumption of the air supply source generation device can also be significantly reduced. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for air curtains to prevent the intrusion of outdoor pests and other contaminants. 【Features】 ■ Made of stainless steel ■ Achieves high airspeed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniformly high performance across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

• nozzle
• Drying Equipment and Devices

The "65SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinsing tank (finishing tank) incorporated into the cleaning device. The slit width can be easily adjusted, and if there is any disturbance in the air velocity, adjusting the slit width can resolve the issue on the spot. Additionally, all models come with fixed brackets (material USU), allowing for options of top, bottom, or side mounting by using the fixed brackets. It is mainly used for drying after water drainage of printed circuit boards and after cleaning bolts and nuts. 【Features】 ■ Made of stainless steel ■ Achieves high air velocity with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

• nozzle
• Drying Equipment and Devices

The "High Blow Nozzle SUS" is a product catalog from Kansai Electric Heating Co., Ltd., which is primarily engaged in the development, design, manufacturing, and sales of application equipment such as AC electric motors and heating devices. It features stainless steel energy-saving nozzles, such as the "65 SUS type," "75 SUS type," and "100 SUS type," which are incorporated into washing devices to simultaneously drain water and dry after the rinsing tank (finishing tank). By integrating these nozzles into washing devices, drying time is significantly reduced, providing benefits such as cost savings and space efficiency. [Contents] ■ Features ■ Applications ■ Product lineup ■ Options, etc. *For more details, please refer to the catalog or feel free to contact us.

• nozzle
• Drying Equipment and Devices

It is a perfect air nozzle that can blow out streamlined air at the entire slit of the nozzle pipe.

• High pressure cleaner

Rapid water cutting, drying, cooling, vibro nozzle.

• High pressure cleaner

No need for compressors or high-pressure blowers!! Achieving an air outlet speed of 100 m/s with a turbo blower.

• High pressure cleaner

Equipped with an operation panel that adds ease of use and new features to durability, cost-effectiveness, high performance, high reliability, and safety.

• Other air conditioning equipment

A compact, high-performance hot air generator that can be safely integrated into the production line!

• Other air conditioning equipment

This is an introduction to the comprehensive catalog of optional parts for the bamboo rope manufacturing machine for generating hot air.

• Other air conditioning equipment

The heater case uses high heat-resistant Alsta steel plates that do not rust, featuring a sturdy structure that has significantly improved durability.

• Other heaters

It is a duct and unit heater that can be installed in any location.

• Other heaters

This is a compact, sturdy frame heater that achieves high efficiency and cost reduction for generating hot air.

• Other heaters

This is an announcement about the "Shrink Nozzle" from Takezuna Manufacturing Co., Ltd.

• nozzle

This is an announcement from Takezuna Manufacturing Co., Ltd. regarding the "High Blow Nozzle."

• nozzle

This is an announcement from Takezuna Manufacturing Co., Ltd. regarding the "High Blow Nozzle Mini."

• nozzle

This is an announcement about the "Demi Filter" from Takezuna Manufacturing Co., Ltd.

• Filter Unit

It is a damper that combines exhaust from the drying furnace and intake of fresh air. By using this damper, there will be no failures in the design of the furnace.

• nozzle

The TSK Multi Dryer has precisely experimented with the materials used and their physical properties to ensure high safety in case of emergencies, resulting in an ideal solution.

• Other heaters

The heater case is made of high heat-resistant Alsta steel plate that does not rust, featuring a sturdy structure that has significantly improved durability.

• Other heaters

Simultaneous drying after draining water from the rinsing tank (finishing tank) incorporated into the cleaning device.

• nozzle

It is a heater for generating hot air that can quickly heat gas to temperatures above room temperature.

• Other heaters

Electric high-temperature hot air generation heater Continuous operation 365 days

• Other heaters

The blow nozzle is a perfect air nozzle that is equipped with an air supply port at one end of the main pipe, converts the airflow direction of the air introduced into the main pipe at a right angle through internal slits, turns the air 180° inside the nozzle pipe, and can blow out streamlined airflow across the entire blowing slit of the nozzle pipe.

• nozzle

This is an announcement about the "Mixing Fan" from Takezuna Manufacturing Co., Ltd.

• fan

Essential for foundries! It demonstrates excellent effectiveness in drying water-based coatings, molds, and cores.

• Other heaters

The TSK high-efficiency honeycomb block heater incorporates heating wires into a honeycomb ceramic with very low pressure loss, creating a structure where gas passes uniformly through both the inside and outside of the heating wires.

• Other heaters

This is a type of conventional hot air generator equipped with a high-pressure blower (vortex blower). It can discharge high-temperature, high-velocity hot air by using nozzles and other accessories (for rapid heating, rapid water removal drying, etc.). It is also suitable for use when high air pressure is required on the discharge side.

• Other heaters

A compact, high-performance hot air generator that can be safely integrated into the production line!

• Other heaters