エース技研 List of Products and Services

The "DPS-110IIIL" is a large-capacity screw valve dispenser. The connection between the liquid contact part and the drive part adopts a bag nut method. Maintenance has been significantly improved, making it even easier to use. A dedicated replaceable screw liner has been provided, achieving both improved discharge variation and high durability while reducing the cost of consumable parts. 【Features】 ■ Large capacity specification ■ Connection between the liquid contact part and the drive part uses a bag nut method ■ Significantly improved maintenance ■ Improvement in discharge variation ■ High durability and low cost of consumable parts achieved simultaneously *For more details, please refer to the PDF document or feel free to contact us.

• dispenser

The "BP-107DN-MA" is a high-performance valve pump with a needle valve that allows for easy fine adjustment of the discharge volume, thanks to its precision micrometer. It comes in a wide variety of options and can be used with a broad range of liquid agents. Due to its diaphragm design, it is separated into an air chamber and a material chamber, making maintenance and cleaning easy. Additionally, it has significantly improved the ability to control very small flow rates compared to conventional models. 【Features】 ■ Equipped with a precision micrometer ■ Allows for fine adjustment of discharge volume ■ Stroke amount can be confirmed numerically ■ Comes in a wide variety of options and can be used with a broad range of liquid agents ■ Separated into an air chamber and a material chamber for easy maintenance and cleaning *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "BP-108DN II Type" is a large-capacity needle valve type pump that can handle a wide range of viscosities from low to high. It can be easily disassembled and cleaned, allowing for reduced maintenance time. By changing the materials of the wetted parts, it can accommodate a wide variety of liquid agents. Additionally, there are various optional specifications available, including a two-component STU specification and a screw valve mounting specification. 【Features】 ■ Reduced maintenance time possible ■ Wide variety of liquid agents accommodated by changing wetted part materials ■ Versatile design that can handle low to high viscosities ■ Various optional specifications, including screw valve mounting ■ High durability diaphragm seal system *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "BP-109S-03" is a high-pressure valve pet designed for ultra-low pressure operation with consideration for the environment. It is a model compatible with high-viscosity liquids, with a maximum liquid delivery pressure of 15MPa, while the operating air pressure is only 0.3MPa. Its rectangular body allows for easy installation. Additionally, we also offer a "nozzle holder" for nozzle attachment and a "high-pressure fitting" for high-pressure hose attachment. 【Features】 ■ Operates at ultra-low air pressure ■ Easy installation with a rectangular body ■ Compact body for easy device attachment ■ Model compatible with high-viscosity liquids ■ Can be directly connected to high-pressure pumps *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "NS-1MX III" is a compact tabletop precision circumferential coating device suitable for small workpieces. The adjustment of the tip coating nozzle has reproducibility due to the built-in micrometer cylinder. Additionally, by adopting a controller and mechanical separation method, it can be used for various applications. 【Features】 ■ Compact tabletop body suitable for small workpieces ■ Equipped with an angle adjustment mechanism for coating flat surfaces, inner surfaces, and outer surfaces ■ Capable of handling workpieces up to φ100 ■ Jigs can be designed to match the workpiece and coating area ■ Adoption of a controller and mechanical separation method *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CT-10" is a new type of cartridge tank that can be pressurized up to a maximum of 0.5 MPa. It is compatible with various shapes of cartridges and can be inserted as a container without the need for replacement. Additionally, the bottom lid features a one-touch attachment and detachment, making material replacement even easier. 【Features】 ■ One-touch attachment and detachment ■ Easy material replacement ■ Compatible with various shapes of cartridges ■ Can be pressurized up to a maximum of 0.5 MPa ■ Remaining quantity check available (optional) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SL-900GP" is a stabilizer that uses a volumetric gear pump method. It allows for the application of high-viscosity liquids directly from the can, achieving high-precision application through volumetric measurement by the gear pump. Additionally, a dedicated controller, the "DPC-900GP," is also available. 【Features】 ■ System compatible with liquid gaskets ■ Volumetric gear pump method ■ Easy application of high-viscosity liquids directly from the can ■ Achieves high-precision application through volumetric measurement by the gear pump ■ Can be mounted on automatic machines *For more details, please refer to the PDF document or feel free to contact us.

• others

Ace Giken, a manufacturer specializing in valve-type dispensers, proposes efficiency improvements for coating operations based on years of know-how and achievements. We provide consistent support from design, development, manufacturing to sales! We will answer questions such as how to effectively apply adhesives with our new products and what types of dispensers are available! Even if standard products cannot meet your needs, we can develop products tailored to your proposals. *Currently, we are offering a manga booklet! For more details, please download it from the form below. 【Features】 ◆ Reduce labor costs through efficient coating operations with robots! ◆ Consultations are possible even if standard products cannot meet your needs! ◆ Compatible with a wide range of products including automobiles, home appliances, and communication devices! For more details, please contact us or download the PDF to view.

• Other industrial robots

The "Groomix 201" adopts a precision gear pump system. It is a two-component mixing and dispensing device capable of continuous operation through volumetric measurement and pumping. Combined with our unique dispensing valve "Valpet," it offers excellent liquid cut-off! The rotation speed of each gear pump for components A and B can be adjusted. Adjusting the mixing ratio is also easy. It is compatible with epoxy, silicone, and polyurethane resins. 【Features】 ■ Compact design ■ High maintainability ■ Gear pump system adopted ■ Continuous operation possible *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "DPS-110 IIIS" is a dispenser capable of applying high-viscosity liquids with high precision in both line and dot patterns. Thanks to the rotational control of the screw shaft, it enables highly accurate dispensing, allowing for delicate dot and line applications, significantly increasing dispensing efficiency (up to 2.5 times more efficient compared to conventional products). Additionally, air consumption, liquid pooling, and heat generation have been greatly reduced. The connection between the liquid contact part and the drive part adopts a bag nut method, significantly improving maintainability and making it even easier to use. 【Features】 ■ High-pressure dispensing is possible through the rotation of the screw shaft ■ Dispensing time is shortened compared to conventional dispensers ■ The reverse mechanism of the screw shaft allows for setting the suction volume ■ High-precision dispensing is possible with rotational control of the screw shaft ■ The rotation of the screw shaft allows for the use of paste solder and epoxy resin without clogging *For more details, please refer to the catalog or feel free to contact us.

• Other pumps

The "AT Series" is a resin pressure tank designed for convenient use with small amounts of materials, ranging from 100ml to 1,000ml. It includes a standard type that can be used with solvents, a black polyacetal type that is ideal for UV adhesives due to its light-blocking properties, and a polypropylene type that is suitable for instant adhesives and silicone sealants because it is moisture-proof. Additionally, the polypropylene tank is translucent, allowing for visual confirmation of the remaining material. 【Specifications】 ■ Operating pressure: Max 0.5MPa (5kgf/cm²) ■ Material: Polyacetal (POM) or Polypropylene (PP) ■ Packing: Silicone rubber *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Pneumatic Equipment

The "NS-1MD" is a device that rotates the workpiece and raises and lowers the nozzle to perform circumferential line coating. It allows for easy circumferential coating and is equipped with an angle adjustment mechanism, enabling both inner and outer surface coating. Stable circumferential line coating leads to reduced coating work time and improved quality. Due to its interchangeable work adapters, it can switch between models and accommodate small-batch production of various types. 【Features】 ■ Stable product quality ■ Significant adhesive savings ■ Improved working environment ■ No need for experienced operators ■ Improved yield *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The "BP-100 Series" is an ultra-precise plunger valve that achieves stable discharge with high accuracy (±1%) regardless of viscosity changes due to temperature. Once the stroke is set, it can discharge a constant amount with high precision even with variations in viscosity due to temperature or changes in air pressure. No adjustment is necessary. 【Features】 ■ Equipped with ultra-precise plunger ■ Achieves outstanding accuracy with discharge variation within ±1% ■ Model selection based on discharge volume ■ High-pressure compatible models available ■ Realizes high durability ■ Adopts our unique sealing method *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The AR-3TT is a 3-axis simultaneous control dispensing robot that can be used for the application of various liquids, including three-dimensional liquid application as well as fine point, line, and circular applications. It can be easily programmed using a teaching pendant, enabling cost reduction and improved work efficiency through the automation of dispensing tasks. Two standard application ranges are available: 200mm x 200mm and 400mm x 400mm. You can select from our extensive variety of dispensing options for all types of liquids, from low-viscosity to high-viscosity. 【Features】 - Capable of three-dimensional liquid application and fine point, line, and circular dispensing - Easy programming with a teaching pendant - Various dispenser systems can be mounted according to the work content - Servo control with pulse motors in 3-axis X, Y, and Z directions - Requires no experienced operators due to its simple operation - PC editing software and PC connection cable (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The "Atom Ace 100 Series" is a dispenser system that ejects high-viscosity liquids at high pressure and high speed. It is ideal for high-viscosity liquids such as silicone sealants, epoxy resins, and greases. It accommodates cartridges, 1kg cans, 3kg cans, and 18L pails. Since work can be done directly from the material container, it eliminates the hassle of transferring to a separate container and prevents material loss. 【Features】 ■ Compact pump, saving space ■ Good liquid discharge when combined with a valve pet ■ Direct use of the material container eliminates the need for transfer ■ The pump has fewer parts, making maintenance easy *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

- Improved discharge accuracy (±3%) with the use of volumetric measuring gear pumps. - Capable of high-pressure discharge of high-viscosity liquids. - Flow rate can be controlled, and the beat width remains stable.

• Other pumps