エコールド・ジャパン List of Products and Services

The maximum width of the beveling surface that can be processed is 18mm (for a bevel angle of 45 degrees). Depending on the material of the workpiece, several passes may be required. The rotation speed of the milling head is constant (6000 rpm) and is optimal for steel and aluminum. There are seven types of beveling heads available (22.5°, 30°, 37.5°, 45°, 50°, 55°, 60°). Beveling inserts are available for both steel and aluminum. The chamfering head can accommodate chamfering inserts of R2, R3, R4, and R5. It is recommended for sites where electric tools cannot be used.

• Other processing machines
• Welding Machine
• Air Tools

The maximum width of the beveling surface that can be processed is 18mm (for a bevel angle of 45 degrees). Depending on the material of the workpiece, several passes may be required. The rotation speed of the milling head can be adjusted using the dial at hand according to the material. There are seven types of beveling heads available (22.5°, 30°, 37.5°, 45°, 50°, 55°, 60°). Beveling tips are available for both steel and aluminum. The R chamfering head can be fitted with chamfering tips of R2, R3, R4, and R5. By attaching a pipe attachment, beveling can be performed on the outer circumference (minimum diameter 150mm) and inner circumference (minimum diameter 100mm). When fixed with a dedicated jig, it can also be used as a beveling machine for small workpieces.

• Other processing machines
• Welding Machine
• Power tools

◇Excellent corrosion resistance stainless steel (AISI 303/304 and AISI 316L/316Ti available) ◇A rich lineup of 13 types ◇Customizable options such as stroke, total length, gas reaction force, and presence of end hydraulic resistance ◇Additional options available based on application and environment Wiper rings / grease chambers / protective tubes / float pistons / mechanical lock mechanisms / retrofittable clean caps, etc. ◇Can be changed to PURITY FG oil for food machinery ◇A wide range of mounting brackets and accessories available ◇Selection service Hahn's gas springs are maintenance-free and consist of a piston rod, piston, cylinder, guide parts, seals, and base plate. Inside the gas spring cylinder, compressed nitrogen gas and oil are sealed. The pressure inside the cylinder pushes the piston out, generating an extension force. In a no-load state, the piston rod is always in the fully extended position.

• Pneumatic Equipment

◇A rich lineup of 17 types ◇Customizable options such as stroke, total length, gas reaction, and presence or absence of end hydraulic resistance ◇Options can be added according to application and environment Wiper rings / grease chambers / protective tubes / float pistons / mechanical lock mechanisms / retrofitted clean caps, etc. ◇Can be changed to UV-cut coating ◇Can be changed to PURITY FG oil for food machinery ◇A wide range of mounting brackets and fixtures available ◇Selection service Hahn's gas springs are maintenance-free and consist of a piston rod, piston, cylinder, guide parts, seals, and base plate. Inside the gas spring cylinder, compressed nitrogen gas and oil are sealed. The pressure inside the cylinder pushes the piston out, creating an extension force. In a no-load state, the piston rod is always in the fully extended position.

• Pneumatic Equipment

This is the most powerful and versatile clinching hand tool from Ecolde. You can use it directly by connecting the tool to an air source. The tool has a robust and simple structure, making maintenance easy. It can clinch soft steel and aluminum with a total plate thickness of 3.5mm for rectangular (S-DF) and 3.0mm for round (R-DF) shapes.

• Forging Machine

It can be used for both rectangular (S-DF) and round (R-DF) shapes! This is a compact and lightweight hand tool for clinching joints. With its slim body and rotating head, it improves work efficiency! It is used by connecting to a dedicated air hydraulic booster. Both the tool and the booster have a sturdy yet simple structure, making maintenance easy. It can be used immediately when connected to air, making it especially recommended for sites with frequent movement and transport. It can clinch soft steel and aluminum with a total plate thickness of up to 3.0mm (S type - rectangular, R type - round).

• Forging Machine

- Sheet metal is plastically deformed at room temperature and mechanically joined. - There are two types of joint shapes: rectangular (S-DF) and round (R-DF). - The dimensions of the main joint points are rectangular = width 4mm, round = φ8mm. - The minimum sheet thickness is 0.5mm (per sheet), and the corresponding total sheet thickness varies by tool. - Joint strength depends on the joint shape and base material strength. - There is no thermal impact on the base material. - There is no generation of spatter or fumes. - The only consumables are the punch and die, and no auxiliary materials are required. - It also accommodates joints with different materials and sheet thicknesses. * The YouTube video introduces examples of rectangular (S-DF) and dedicated machine usage in Germany.

• Forging Machine

This is the smallest and lightest clinching joining hand tool from Ecolde. It is used in conjunction with a dedicated air hydraulic booster. Both the tool and the booster have a robust yet simple structure, making maintenance easy. It can be used immediately when connected to air, making it especially recommended for sites with frequent movement and transportation. It can clinch soft steel and aluminum with a total plate thickness of up to 3.0mm (S-type and rectangular).

• Other processing machines

The P201 is a versatile machine for sheet metal processing. It can freely cut materials as a vibro shear, and by changing attachments, it can perform various processes and shaping such as nibbling, flanging, and louver cutting. The latest model of the machine, which once enjoyed global popularity as part of the Pulmax P series, is the P201. It is now manufactured and serviced by the Swedish company SMV. This machine is widely used in small and large sheet metal shops that specialize in one-off parts made by hand, vocational training schools, automotive prototyping and restoration, as well as ship component manufacturing and repair, and is well-regarded for its quality and durability.

• Plastic processing machines (cutting and rolling)

We would like to introduce frequently asked questions regarding the custom order gas springs from Hahn that we handle. We will answer questions such as, "At what position is the setting gas reaction force (F1 value) measured?" and "What are the F3 and F4 values of the gas reaction force?" Please take a moment to read through. 【Questions】 ■Q Can you tell me about the installation angle of the gas spring? ■Q At what position is the setting gas reaction force (F1 value) measured? ■Q What are the F3 and F4 values of the gas reaction force? ■Q What is the gas change rate (Progression)? ■Q I would like to lower the gas change rate (Progression), how can I do that? *For more details, please refer to the PDF document or feel free to contact us.

• Spring

Hahn products are not safety components. Gas springs, tension springs, and oil dampers are maintenance-free, but since they are consumables, it is necessary to regularly test their functionality according to the usage environment and application. To use the products for a longer time, they need to be protected especially from corrosion. 【Tolerances/Characteristics (Partial)】 ■ Maximum stroke speed of gas springs = 300mm/s (when installed) ■ Tolerance of the overall length of the product = ±2mm ■ The damping force of adjustable oil dampers can be increased or decreased by rotating the piston rod at the maximum extension and maximum compression positions ■ The overall length changes when the piston rod is rotated ■ When the ambient temperature changes, the characteristics of the oil filled in the product change *For more details, please refer to the PDF document or feel free to contact us.

• Spring

We would like to introduce the options for the custom order gas springs from HAHN that we handle. We offer features such as the "piston rod seal" to prevent foreign objects from entering the release system of the gas spring with a lock, as well as a "grease chamber." By adding options such as protective tubes and locking mechanisms, HAHN gas springs can be used in various environments. We also respond to various requests to ensure they can be used in harsh conditions. 【Product Lineup】 ■ Wiper Ring ■ Piston Rod Seal ■ Grease Chamber ■ Protective Tube (Metal) ■ Float Piston *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Ecoled Japan Co., Ltd. offers the bracket 'BA30/BA30V4'. There is an option for stainless steel W.1.4404/AISI 316 (V4), and the material used is zinc-plated steel. We also have "BB20/BB20V4" available. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Option: Stainless steel W.1.4404/AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• bracket

At Ecoled Japan Co., Ltd., we handle the bracket 'BA01/BA01V4'. The option available is stainless steel W.1.4404/AISI 316 (V4), and the material used is zinc-plated steel. We also have "BB01/BB01V4" available. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel ■Option: Stainless steel W.1.4404/AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• bracket

At Ecolde Japan Co., Ltd., we handle the bracket 'BA20/BA20V4'. We offer an option of stainless steel W.1.4404/AISI 316 (V4), and the material used is zinc-coated steel. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-coated steel ■Option: Stainless steel W.1.4404/AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• bracket

At Ecolde Japan Co., Ltd., we handle the bracket 'BC01/BC01V4'. The material used is zinc-plated steel, with options available in stainless steel W.1.4404 and AISI 316 (V4). Additionally, we also have "BC04/BC04V4" available. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel W.1.4404/AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• bracket

At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA56'. It is made of zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer the M20 'GA80' and M24 'GA99'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ecolde Japan Co., Ltd., we handle the mounting bracket (fork type) 'GA16'. The material used is zinc-plated steel, and options include stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also have M5 models such as 'GA20' and 'GG20'. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Ecold Japan Co., Ltd. handles mounting brackets (shaft joint type). We offer "ADKG" and "ADKU" in sizes M5, M8, M10, and M14. The products are made of zinc-plated steel. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ecoled Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'WX30'. We offer options in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we use zinc-plated steel for the material. Please feel free to contact us if you have any requests. 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ecolde Japan Co., Ltd., we handle the mounting brackets (ball joint & socket type) 'PX18'. We also offer a lineup that includes 'WX18' for M3.5 and 'WG22', 'PF22' for M5. The material used is zinc-plated steel, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). 【Specifications】 ■ Material: Zinc-plated steel ■ Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ecolde Japan Co., Ltd., we handle mounting brackets (hinge joint type). The option is stainless steel AISI 303 (V2), and the material used is zinc-plated steel. We offer products such as "AG27," "AG36," and "AG43." Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel ■Option: Stainless steel AISI 303 (V2) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ecolde Japan Co., Ltd., we handle the mounting hardware (eyelet type) 'AK17'. The materials used are zinc-plated steel and Delrin 100, with options available in stainless steel AISI 303 (V2) and AISI 316 (V4). Additionally, we also offer other models such as 'AK21' and 'AU27'. Please feel free to contact us if you have any requests. 【Specifications】 ■Material: Zinc-plated steel, Delrin 100 ■Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

At Ekoled Japan Co., Ltd., we handle "mounting brackets (eyelet type)." The materials are zinc-plated steel and Delrin 100 (AK), with options of stainless steel AISI 303 (V2) and AISI 316 (V4). Please feel free to contact us when you need assistance. 【Specifications】 ■Materials: Zinc-plated steel, Delrin 100 (AK) ■Options: Stainless steel AISI 303 (V2), AISI 316 (V4) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "G30-65" is a gas spring with a gas change rate of approximately 35%. The gas reaction force setting range is 750-1000N, and the cylinder diameter is Φ65mm made of black painted steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 750-1000N ■ Gas change rate: Approximately 35% ■ Piston rod diameter: Φ30mm hard chrome plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ65mm black painted steel ■ Mounting brackets: Zinc plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G25-55" is a gas spring with a cylinder made of black painted steel. The piston rod is made of hard chrome-plated steel and can be changed to stainless steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 500-7500N ■ Gas variation rate: approximately 40% ■ Piston rod diameter: Φ25mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ55mm black painted steel ■ Mounting bracket: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G22-40" is a gas spring with a gas reaction force setting range of 300-6000N. The piston rod diameter is Φ22mm, and the mounting brackets are made of zinc-plated steel. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Gas reaction force setting range: 300-6000N ■ Gas variation rate: approximately 43% ■ Piston rod diameter: Φ22mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ40mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G20-40" is a gas spring with a gas change rate of approximately 40%. The cylinder diameter is Φ40mm made of black painted steel, and the piston rod diameter is Φ20mm made of hard chrome-plated steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 300-5000N ■ Gas change rate: approximately 40% ■ Piston rod diameter: Φ20mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ40mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G14-40" is a gas spring with mounting brackets made of zinc-plated steel. The gas change rate is approximately 16%, and the piston rod diameter is Φ14mm, made of hard chrome-plated steel, which can be changed to stainless steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 150-2500N ■ Gas change rate: approximately 16% ■ Piston rod diameter: Φ14mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ40mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G14-28" is a gas spring with a cylinder diameter of Φ28mm. The gas reaction force setting range is 150-2600N, and the gas change rate is approximately 40%. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 150-2600N ■ Gas change rate: Approximately 40% ■ Piston rod diameter: Φ14mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ28mm black painted steel ■ Mounting bracket: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G10-40" is a gas spring with a gas force adjustment range of 100-1200N. The mounting brackets are made of zinc-plated steel, and the cylinder diameter is Φ40mm with black painted steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas force adjustment range: 100-1200N ■ Gas variation rate: approximately 8% ■ Piston rod diameter: Φ10mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ40mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G10-28" is a gas spring with mounting brackets made of zinc-plated steel. The piston rod diameter is Φ10mm and is made of hard chrome-plated steel, with the option to change to stainless steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 80-1250N ■ Gas variation rate: approximately 20% ■ Piston rod diameter: Φ10mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ28mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G10-23" is a gas spring with a gas reaction force setting range of 80-1250N. The cylinder diameter is Φ23mm, made of black painted steel, and the gas change rate is approximately 30%. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 80-1250N ■ Gas change rate: Approximately 30% ■ Piston rod diameter: Φ10mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ23mm black painted steel ■ Mounting bracket: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The "G08-23" is a gas spring with a gas change rate of approximately 18%. The piston rod made of hard chrome-plated steel can be changed to stainless steel. The cylinder diameter is Φ23mm and is made of black painted steel. Please feel free to contact us when you need it. 【Specifications (partial)】 ■ Gas reaction force setting range: 35-800N ■ Gas change rate: approximately 18% ■ Piston rod diameter: Φ8mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ23mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G08-19 is a gas spring with a cylinder diameter of Φ19mm made of black painted steel. The gas reaction force setting range is 50-800N, and the gas variation rate is approximately 30%. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 50-800N ■ Gas variation rate: Approximately 30% ■ Piston rod diameter: Φ8mm hard chrome plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ19mm black painted steel ■ Mounting brackets: Zinc plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G06-19 is a gas spring with a gas force adjustment range of 20-450N. The cylinder diameter is Φ19mm, made of black painted steel, and the mounting brackets are made of zinc-plated steel. Please feel free to contact us if you need assistance. 【Specifications (partial)】 ■ Gas force adjustment range: 20-450N ■ Gas change rate: approximately 17% ■ Piston rod diameter: Φ6mm hard chrome-plated steel (can be changed to stainless steel) ■ Cylinder diameter: Φ19mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G06-15 is a gas spring with a cylinder diameter of Φ15.6mm made of black painted steel. The piston rod diameter is Φ6mm and is made of hard chrome-plated steel, with the option to change to stainless steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 30-450N ■ Gas change rate: approximately 22% ■ Piston rod diameter: Φ6mm hard chrome-plated steel (changeable to stainless steel) ■ Cylinder diameter: Φ15.6mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G04-12 is a gas spring with a gas change rate of approximately 15%. The gas reaction force setting range is 10-200N, and the mounting brackets are made of zinc-plated steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 10-200N ■ Gas change rate: Approximately 15% ■ Piston rod diameter: Φ4mm stainless V2a ■ Cylinder diameter: Φ12mm black painted steel ■ Mounting brackets: Zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G03-10 is a gas spring with a gas reaction force setting range of 10-110N. The mounting brackets are made of zinc-plated steel, and the cylinder diameter is Φ10mm with black painted steel. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Gas reaction force setting range: 10-110N ■ Gas variation rate: approximately 20% ■ Piston rod diameter: Φ3mm stainless V2a ■ Cylinder diameter: Φ10mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

The G03-08 is a gas spring with a gas change rate of approximately 30%. The cylinder diameter is Φ8mm, made of black painted steel, and the mounting brackets are made of zinc-plated steel. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Gas reaction force setting range: 10-100N ■ Gas change rate: approximately 30% ■ Piston rod diameter: Φ3mm stainless V2a ■ Cylinder diameter: Φ8mm black painted steel ■ Mounting brackets: zinc-plated steel *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

We would like to introduce our "gas springs." Inside the cylinder, compressed nitrogen gas and oil are sealed, and the pressure within the cylinder is applied to the cross-section of the piston rod, resulting in an extension force. Gas springs contain oil within the cylinder to lubricate the piston rod, and this oil also has the function of providing hydraulic resistance just before the piston rod fully extends. 【Product Lineup】 ■ Gas Springs ■ Gas Springs with Locking Function ■ Tension Springs *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

This catalog offers a wide range of "gas springs." It provides detailed information on the composition and function of gas springs, as well as how to place an order. With 17 types and a rich variety, you can specify stroke length, overall length, gas pressure, and more. Please make use of this for selecting products. 【Contents (excerpt)】 ■ Hahn Company and Gas Springs ■ Composition and Function of Gas Springs ■ How to Place an Order ■ How to Place a Repeat Order *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Spring
• Other machine elements

Common issues include the difficulty of transporting heavy, flat items in environments or sites without ceiling cranes or conveyor systems. Our "Carry Mate Series" makes it easy to grip and attach handles to difficult-to-transport items such as steel plates, glass, stone, and plywood. As a result, heavy objects can be transported with minimal effort, and they can be moved forward, allowing for safe work in areas with uneven surfaces like steps. [Results of Implementation] - Heavy objects could be transported with minimal effort. - Forward transportation enabled safe work in areas with uneven surfaces like steps. - Grip could be achieved in an optimal position, allowing for comfortable transportation. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• Other work tools
• Other conveying machines

We would like to introduce the features of our product, "Carry Mate." By placing a panel-shaped object between the two grips and lifting it, you can hold it securely in a comfortable posture. It is generally used in pairs, with a load capacity of 100 kilograms per unit. 【Features】 ■ By placing a panel-shaped object between the two grips and lifting it, you can hold it securely in a comfortable posture. ■ It can grip flat objects made of metal, wood, stone, glass, etc. ■ Generally used in pairs. ■ The load capacity per unit is 100 kilograms. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• Other work tools
• Other conveying machines

"Carry Mate" is a tool that clamps and transports panel-shaped objects without handles using a unique clamping mechanism. It easily grips difficult-to-transport items such as steel plates, glass, stone, and plywood. It allows for easy handling by attaching a handle. Please feel free to contact us when you need assistance. 【Features】 ■ Clamps and transports panel-shaped objects without handles using a unique clamping mechanism ■ Easily grips difficult-to-transport items such as steel plates, glass, stone, and plywood ■ Makes it easier to carry by attaching a handle *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• Other work tools
• Other conveying machines