テクノミックス List of Products and Services

This is an inert specification auto-sampler using PEEK resin in the liquid contact area. It can be used for the analysis of bioactive substances and metal ions. Additionally, it comes with a sample cooler, allowing for temperature control in the range of 4 to 70 °C. (S2583-13)

• High Performance Liquid Chromatograph

This is an online degasser made by Shimadzu. It is capable of degassing up to 4 channels. (S1967-19)

• High Performance Liquid Chromatograph

It is a photodiode array detector manufactured by Shimadzu. (S1746-00)

• High Performance Liquid Chromatograph

This is a Shimadzu-made liquid delivery pump for HPLC using a parallel double plunger system. The VP function allows for the management of maintenance information and validation information, among others. (S2950-10)

• High Performance Liquid Chromatograph

It is the HPLC "Chromaster" manufactured by Hitachi High-Tech. It has a low-pressure gradient specification. (S2839-00)

• High Performance Liquid Chromatograph

This is an auto-sampler for Shimadzu's high-speed liquid chromatograph. It has a specification that allows for large volume injections (up to 5000 μL), making it ideal for semi-preparative purposes. (S2838-04)

• High Performance Liquid Chromatograph

It is a heating decomposer for measuring total phosphorus, total nitrogen, and COD. The temperature inside the reactor is controlled from 37 °C to 165 °C in 1 °C increments. It is suitable for Hach COD, UniCell, TOC, and Test 'N Tube vials. (S2976-06)

• Microreactor

This is a Hitachi air compressor. It is oil-free, making it easy to handle and capable of supplying air without oil content. It is also ideal as a supply gas for gas chromatography. (S2976-08)

• Air Tools

This is a gas chromatograph GC-2014AF with a packed column specification. It is equipped with a dual packed injection unit at the injection port and a flame ionization detector (FID). The software GCSolution, which allows for body control and data analysis, is included. (S2976-00)

• Gas chromatograph

This is a gas chromatograph GC-2030AF with a capillary column specification. It is equipped with two split/splitless injection units at the injection port and two hydrogen flame ionization detectors (FID). The measurement and analysis system software, LabSolutions LC/GC, is included. (S2974-00)

• Gas chromatograph

<Eligible Purchase Models> - Liquid Chromatograph (HPLC) - Gas Chromatograph (GC) - Ion Chromatograph (IC) - Mass Spectrometer (LCMS / GCMS) - Fluorescence X-ray Analyzer (EDX) - Atomic Absorption Analyzer (AA) - ICP Emission Spectrometer (ICP) - Fourier Transform Infrared Spectrometer (FT-IR) - Ultraviolet-Visible Spectrophotometer (UV) - Fluorescence Spectrophotometer (RF) - Particle Size Distribution Analyzer (SD) - Total Organic Carbon Analyzer (TOC) - Electron Microscope (SEM, TEM) - Physical and Chemical Instruments (Ultrapure Water System, Evaporator, Electronic Balance, Dryer, etc.) - Electronic Measuring Instruments <Eligible Manufacturers> - Shimadzu Corporation - Hitachi High-Technologies Corporation - Agilent Technologies - JASCO Corporation - Waters Corporation - GL Sciences Inc. - TOA DKK Corporation - Horiba, Ltd.

• Analytical Equipment and Devices
• oscilloscope
• Electron microscope

It is a multifunctional pyrolyzer capable of analyzing all forms of polymer materials, including insoluble materials and composite materials, in very small amounts without the need for conventional pretreatment. (S2986-02)

• Gas chromatograph

This is the Shimadzu gas chromatograph GC-2025. It features a split/splitless injection port and is equipped with a hydrogen flame ionization detector (FID). Due to reduced power consumption, it uses a standard 15 A plug, allowing it to be used without changing the shape of the outlet. (S2989-00)

• Gas chromatograph

Elemental analysis of samples in various forms such as solid, liquid, and powder is possible. It is equipped with a detector using an electronic cooling method that does not require liquid nitrogen, which reduces routine maintenance and lowers operational running costs. It is equipped with a 12-sample turret, allowing for automatic continuous measurement. (S2958-00)

• X-ray fluorescence analyzer

This is a photodiode array detector manufactured by Shimadzu. It features an added high-sensitivity mode and demonstrates a high sensitivity of 0.6×10^-5 AU, comparable to UV-Vis detectors, thanks to its light source compensation function. (S2967-00)

• High Performance Liquid Chromatograph

This is a laser diffraction particle size distribution measurement device with a measurement range of 17 nm to several hundred micrometers (depending on the viscosity of the dispersing medium and particle density). It is equipped with a batch cell (SALD-BC23) that allows measurement with a small amount of sample (target particles and dispersing medium). Organic solvents and acids can be used as the dispersing medium. (S2928-00)

• Analytical Equipment and Devices

This is a Shimadzu HPLC high-pressure gradient system. It is equipped with an absorbance detector. (S2942-02)

• Analytical Equipment and Devices
• High Performance Liquid Chromatograph

This is a Fourier transform infrared spectrophotometer manufactured by Shimadzu. It comes with a horizontal ATR for single reflection. Sample pretreatment is not required, and measurement can be performed simply by pressing the sample against the prism. (S2939-00)

• Analytical Equipment and Devices

It is a non-contact portable dimensional measurement device that replaces calipers and gauges. By using lasers for measurement, it can measure without damaging the object. It is capable of measuring dimensions of various shapes such as gaps, steps, and arcs. (S2902-00)

• Other measurement, recording and measuring instruments

This is a Japan Spectroscopic Company's FT-IR with a maximum resolution of 0.7 cm-1 and a S/N ratio of 25000:1. Its compact design allows for flexible installation, making it suitable for routine analysis. (S2932-00)

• Spectroscopic Analysis Equipment

This is a gas chromatograph for capillary columns manufactured by Shimadzu Corporation. It features a split/splitless injection port and is equipped with a hydrogen flame ionization detector (FID). (S2847-00)

• Analytical Equipment and Devices

This is an atomic absorption spectrophotometer capable of both frame measurement for high concentration analysis and furnace measurement for trace analysis without the need to replace the atomization unit. The auto-sampler can be used for both frame and furnace measurements with a single unit. Additionally, it comes with a hydride generation device (HVG-1), enabling high-sensitivity measurement of As, Se, and Sb (around 1 ppb). (The change of the atomization unit is performed automatically through software operation.) (S2905-00)

• Analytical Equipment and Devices

This is the Shimadzu Nexera series ultra-fast liquid chromatography system. It features a pressure resistance of 130 MPa and a low system volume, enabling ultra-fast and high-resolution analysis. Two delivery pumps allow for high-pressure gradient measurements with two liquids. (S2758-00)

• Analytical Equipment and Devices

This is an auto-sampler with a pressure resistance of 130 MPa. It can inject samples ranging from 0.1 μL to a maximum of 50 μL (20 μL when using the loop injection method). In addition to the easy-to-set "standard injection mode," there is also a "repeat injection mode" that allows for the setting of sandwich analysis at a fixed interval, enabling sample injection tailored to the analysis purpose. (S2446-06)

• Spectroscopic Analysis Equipment

This is a liquid delivery unit that achieves 130 MPa liquid delivery. (S2446-05)

• Analytical Equipment and Devices

This is a multi-wavelength real-time PCR device that uses a copper block with high thermal conductivity. It is equipped with optional filters for HEX/VIC and Cy5. The software includes two types: one for researchers (Thermal Cycler Dice Real Time System) and one for inspectors (for food and environmental testing). (S2872-01)

• Analytical Equipment and Devices

This is a polarimeter manufactured by Rudolf Research Analytical, equipped with sample temperature control. This device can be calibrated using NIST-traceable secondary standard cells. (S2761-00)

• Analytical Equipment and Devices

This is a dual flow path system for ion chromatography manufactured by Shimadzu Corporation. It is a system that allows simultaneous analysis of anions and cations (2 channels) by simply setting one sample vial in the rack. Additionally, with the anion suppression method, it is equipped with a UV detector, enabling the detection of nitrite nitrogen without being affected by chloride ions. (S2748-00)

• Analytical Equipment and Devices

This is a chemical reaction vessel for high-performance liquid chromatography manufactured by Shimadzu Corporation. It is a chemical reaction vessel that allows for stable chemical reactions by maintaining a constant temperature in the reaction tube. It performs well as a post-column reaction vessel and as a reaction vessel for FIA. It can operate independently, making it usable with any HPLC manufacturer. (S2660-06)

• Analytical Equipment and Devices

This is a power supply unit for a high-speed liquid chromatograph manufactured by Shimadzu Corporation. The power supply unit has eight outlets. Of these outlets, four can be controlled for ON/OFF power line control via signals from the system controller. By controlling the power of each device with the system controller, further automation of the analytical system can be achieved. (S2659-07)

• Analytical Equipment and Devices

This is a Shimadzu gas chromatograph GC2010pLUS. It features a split/splitless injection port and is equipped with a flame ionization detector (FID) and a flame photometric detector (FPD). (S2867-00)

• Analytical Equipment and Devices

This is a data processing device for chromatographs manufactured by Shimadzu Corporation. It is equipped with a high-speed parallel printer and features multitasking and multi-window capabilities. (S2827-01)

• Analytical Equipment and Devices

This is an infrared microscope manufactured by Thermo Fisher Scientific. It is capable of handling severe analyses such as microscopic foreign substances of a few microns. It can be used in combination with Thermo's FT-IR. (S2656-02)

• Spectroscopic Analysis Equipment

This is a pressurized concentration device with an integrated controller and pump. It can be used by connecting from a single standalone unit to over 100 multi-samples. Additionally, an optional dry unit is included, allowing for nitrogen blow-drying. (S2798-00)

• Separation device

This is an electronic printer for balances manufactured by Shimadzu Corporation. It is a printer that can be widely used for various mass measurements and weighing management. With key operations on the printer side, you can send commands for print output, auto print settings, and tare (net weight) to the balance side. (S2839-03)

• Scale

This is an infrared thermography device manufactured by NEC Avio Infrared Technology. It is a compact and lightweight non-contact infrared radiation thermometer that integrates the detection unit, image display unit, and recording unit. It converts the infrared radiation naturally emitted from the measurement target into an electrical signal using a two-dimensional uncooled infrared detector, then transforms it into temperature data, which is displayed as a thermal image in color or black and white. (S2820-00)

• Thermography

This is a Toshiba TOSCON air compressor. It is oil-free, making it easy to handle and capable of supplying air without oil content. It is also ideal as a supply gas for gas chromatography. (S2647-05)

• Air Tools