吉田機械興業 List of Products and Services

The "NanoVita" is a tabletop experimental device that performs three functions—emulsification, dispersion, and crushing—enabling the fine-tuning and homogenization of battery materials. As a media-less device, it minimizes contamination risks and allows for clean particle control. 【Features】 ■ Performs three functions (emulsification, dispersion, crushing) with one device ■ Tabletop experimental device ■ Explosion-proof version available with air drive

• Emulsifier/Disperser
• Secondary Cells/Batteries
• Homogenizer

The "VES" is our first medium-capacity mass production machine equipped with a vertical cylinder. [Features] - The incorporation of a vertical cylinder makes it more compact than conventional devices. - Suitable for medium volume processing, ideal for scaling up from lab machines. - Can be introduced at a lower cost compared to B-EDX. *For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

The "Damatri System" is a mixing device that solves the problems of mixing and dissolving materials that increase in viscosity or become lumpy, as well as preventing foaming. Since there are no rotating parts, it provides stirring power equivalent to a homomixer while allowing for mixing without creating foam. It can quickly disperse materials such as food fibers that are difficult to blend with water, and it achieves a reduction in stirring time that was previously challenging. 【Features】 ■ Forcibly generates shear without short paths ■ Can handle viscosities around 2000 mPa·s ■ No rotating system, making it less likely to create foam during processing ■ Improves processing uniformity ■ Reduces processing time *For more details, please refer to the PDF document or feel free to contact us.

• Other mixing and mixing equipment
• Other powder equipment

The "B-EDX" is a build-up type of our NanoVita series mass production machine "B-ED." It is a high-throughput type with improved operability and functionality. [Features] - Build-up type of the NanoVita series mass production machine "B-ED" - High-throughput type - Improved operability compared to conventional machines *For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

The "L-ES" is a tabletop experimental machine that performs three functions: emulsification, dispersion, and crushing, all in one unit. It serves as the standard model for wet media-free micronization experimental machines. 【Features】 ■ Tabletop design ■ Performs three functions (emulsification, dispersion, crushing) in one unit ■ Standard model for wet media-free micronization experimental machines ★ Celebrating 20 years of NanoVate sales with a special campaign ★ In commemoration of our 20th anniversary, we are offering a limited edition at an affordable price to express our gratitude to all customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

The "C-ES" is a compact tabletop experimental device designed to meet the demand for space-saving solutions. It is smaller than our NanoVita series tabletop experimental device "L-ES." 【Features】 ■ Compact type designed to meet the demand for space-saving solutions ■ Smaller than the NanoVita series tabletop experimental device "L-ES" ★ Celebrating 20 Years of NanoVita Sales Campaign Now Underway ★ In celebration of our 20th anniversary, we are offering a limited edition at an affordable price as a token of appreciation to all our customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

The "L-ED" is an electric tabletop experimental device. In addition to a constant discharge mode and a double discharge mode, it is equipped with a heterogeneous discharge mode that allows for the injection of different samples into each axis and discharging them in any desired ratio. 【Features】 ■ Electric tabletop experimental device ■ Constant discharge mode ■ Double discharge mode ■ Heterogeneous discharge mode ★ Celebrating 20 Years of Nanovate Sales Campaign Now Underway ★ In commemoration of our 20th anniversary, we are offering a limited edition at an affordable price to express our gratitude to all customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

"L-AS" is the air-driven standard model for our company's NanoVator series tabletop experimental machine, the electric model "L-ES." It requires no power supply and is explosion-proof. 【Features】 ■ Air-driven model of the NanoVator series tabletop experimental machine (electric model) "L-ES" ■ Standard model ■ Explosion-proof ■ No power supply required ★ Celebrating 20 Years of NanoVator Sales Campaign ★ In commemoration of our 20th anniversary, we are offering a limited edition at an affordable price as a token of gratitude to all our customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

"L-AD" is a model that expands processing capacity by connecting two of our NanoVita series tabletop experimental machines, "L-AS," in parallel. It allows for optional operation in single-axis or multi-axis mode, and enables pulsation reduction operation by adjusting the non-discharging speed. 【Features】 ■ Expanded processing capacity model of the NanoVita series tabletop experimental machine "L-AS" ■ Optional operation in single-axis or multi-axis mode ■ Pulsation reduction operation by adjusting the non-discharging speed ★ 20th Anniversary Campaign for NanoVita Now Underway ★ In celebration of our 20th anniversary, we are offering a limited edition at an accessible price to express our gratitude to all customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

This document explains the dispersion of CNTs using the ultra-high pressure wet-type micronization device "NanoVator" with the help of graphs. When using this product for CNT dispersion processing, a phenomenon is observed where the viscosity initially increases and then decreases. Long, thin CNTs become swollen during the process of bundle dispersion, leading to an increase in viscosity, and as the bundles disperse, the viscosity decreases. Viscosity changes can be considered as one indicator for confirming the dispersion state. [Contents] ■ Dispersion of CNTs and viscosity changes ■ CNT dispersion and resistance value changes using NanoVator *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

This document provides information on the production of cellulose nanofibers using the ultra-high pressure wet-type micronization device "NanoVator." It explains the content related to the "heating device" and the "changes due to NanoVator treatment," including processing conditions at different concentrations and their effects. 【Processing with the NanoVator Heating System】 ■ Heating above 150°C loosens hydrogen bonds and accelerates fiber formation ■ Raw materials can be added at room temperature ■ Continuous processing is possible *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

This document contains information about the dispersion of functional materials using the ultra-high pressure wet-type micronization device "NanoVator." There are various materials related to films, such as fillers, conductive materials, and insulating materials. However, as high-performance films increasingly utilize high-performance materials, it becomes important to leverage the characteristics (performance) of these materials. [Contents] - Dispersion of hydrophobic silica - Adjustment of 55% natural graphite water-based paste - CNT dispersion and changes in resistance - Characteristics of NanoVator dispersion *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

"Multi-Damatori <MDT>" has improved upon the conventional "Damatori." * "Damatori" is a mixing technology that solves issues related to materials that increase in viscosity, clump together, or foam during mixing and dissolution. Have you experienced any of the following symptoms with your current mixing equipment? ◎ Clumps remain even after stirring... ◎ Mixing and dissolution times do not decrease... ◎ Insufficient pre-treatment of CNT... ⇒ These issues can be improved with Multi-Damatori <MDT>! [Improvements from Damatori] ■ One pass through Multi-Damatori equals five passes ■ Flexible combinations of sizes ■ No accumulation of samples ■ Can be used with the existing Damatori (1/2) by simply replacing the contents * For more details, please refer to the PDF document or feel free to contact us.

• Other mixing and mixing equipment
• Piping parts
• Other powder equipment

This document presents information on the thermal insulation and heat dissipation improvements of alumina materials using the ultra-high pressure wet-type micronization device "Nanovator." With the miniaturization of components, there is a need for improved thermal insulation and heat dissipation properties, leading to considerations for fine dispersion (high dispersion) to enhance material functionality. [Contents] - Graphs before and after dispersion treatment with Nanovator(TM) - Case of filling a spoon with liquid and drying it - Measurement data during heating when the ceramic surface of the spoon is heated with a heating wire *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

The microemulsion "Micro 305, 305-P, Q10-0.3" (Micro Series) is a microemulsion that contains the amino acid-based emollient El Dew® PS-203. By incorporating the Micro Series into formulations, the moisturizing properties, skin roughness improvement effects, and damaged hair repair effects of El Dew® can be expected. Micro Q-10 is a microemulsion that includes CoQ10 (ubiquinone), which has been difficult to incorporate into aqueous formulations. This allows for the easy dispersion of CoQ10 in aqueous solutions at the desired concentration. 【Features】 ■ Particle size: 50–200 μm ■ Emulsifiers used are soybean lecithin and polyglycerin fatty acid esters ■ Easily added to aqueous formulations ■ As it is a fine particle, it penetrates the skin without stickiness, providing lasting moisture *For more details, please contact us or download the PDF. *For pricing and delivery inquiries, please contact Ajinomoto Healthy Supply Co., Ltd., Fragrance Division. TEL: 03-3563-7584

• Fats and oils
• others

Maximize the functionality of spherical particles! With NanoVate, we achieve damage-free dispersion of functional particles and uniform particle size. You can check it in the enlarged photo, so please refer to the materials. *For more details, please refer to the PDF materials or feel free to contact us.*

• Emulsifier/Disperser
• Homogenizer

Our company manufactures and sells a wet-type micro-pulverization device called "NanoVita," which enables uniform dispersion and mixing of single-layer carbon nanotubes in resin. By processing with high shear force obtained at a maximum pressure of 200 MPa, our "damage-free dispersion treatment" minimizes damage to particles, allowing for the disaggregation of clusters without changing particle size, thus achieving uniform dispersion and mixing. This enables the enhancement of conductivity and thermal conductivity in resin materials, as well as improved heat resistance. ★ You can view product catalogs and materials comparing dispersion quality with propeller stirring treatment and damatari treatment by downloading the PDF. 【Product Features】 ■ Uniform dispersion without damaging particles due to powerful shear force ■ Fully explosion-proof air-type experimental machine, model: NV L-AS ■ Capable of emulsification, dispersion, and crushing tasks with a single unit ■ Media-less type with low risk of metal contamination ■ Development for films, mechanical parts, and medical fields, etc.

• Emulsifier/Disperser
• Homogenizer

We manufacture and sell the wet-type micronization device "NanoVate," which is useful for the development of high-performance composite materials. By processing with high shear force obtained at a maximum pressure of 200 MPa, our "damage-free dispersion treatment" minimizes damage to particles, allowing for the disaggregation of agglomerates without breaking the particle size, resulting in a uniform dispersion. It can also be utilized in the development of conductive materials, achieving lightweight and high strength through the combination of carbon nanotubes and cellulose nanofibers, as well as improving transparency. ★ You can view product catalogs and documents introducing examples of composite material processing from the "PDF Download" section. 【Product Features】 ■ Uniform dispersion without damaging particles due to strong shear force ■ Air-driven experimental device fully compliant with explosion-proof standards, model: NV L-AS ■ Capable of emulsification, dispersion, and crushing operations with a single unit ■ Media-less type with low risk of metal contamination ■ Applicable in the development of semiconductors, batteries, aerospace, and medical fields.

• Emulsifier/Disperser
• Homogenizer

In this document, we will introduce examples of ceramic dispersion using NanoVate. We will explain using graphs for silica, alumina, and titanium dioxide respectively. The advantages include damage-free dispersion of build-up manufacturing particles (functional materials) rather than top-down material processing, as well as contamination-free dispersion. 【Advantages】 ■ Dispersion is possible while maintaining the shape of the particles ■ Metal contamination can be controlled at the ppb level ■ Uniform dispersion is possible even when ceramics and carbon are mixed together *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

At Yoshida Machinery Industry, we accept contract processing for the nano and micro-emulsification of cosmetic oils. We mix oils, emulsifiers, and water, and perform high-pressure emulsification using the ultra-high-pressure wet-type micro-pulverization device "NanoVater." This process disperses the oils into nano and micro sizes in water. We can accommodate everything from formulation development to prototype creation and production of work samples up to 300L per lot without the need for capital investment. [Development Examples] ■ Micro 305: Micro-emulsion of 10% amino acid ceramide (oil) - A collaborative development series with Ajinomoto Healthy Supply Co., Ltd. - Essence for hair damage care and skincare cosmetics - The micro-emulsion penetrates damaged hair *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Homogenizer

"Multi-Damatori" is a product that contributes to the uniform mixing of powders and liquids. Carbon nanotubes were added to water and treated separately with this product and our "propeller mixer" for 30 minutes each. The treatment with this product resulted in the uniform dispersion of the agglomerated carbon nanotubes. This product is effective for pre-mixing powders and liquids that tend to leave clumps and increase viscosity. It is effective not only for carbon nanotubes but also for the pre-dispersion of various materials. Please verify its effectiveness through experiments or rentals.

• Mixer/agitator

"Damatri" is a powder-liquid mixing pipeline that allows for the mixing and dissolution of materials that tend to clump together with just one pipe. It reduces the conventional stirring time by one-third, achieving improved product quality. Additionally, it can be easily introduced by simply connecting the pipeline to existing lines. Please feel free to contact us when you need assistance. 【Features】 ■ Time reduction ■ Clump improvement ■ Easy connection *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials
• Other mixing and mixing equipment
• Other powder equipment

"NanoVita" is a super high-pressure emulsification device that microfinishes emulsions through powerful shear force. In general solubilization formulations, emulsifiers are required in amounts 2 to 5 times that of the oil phase. By using this product, it is possible to prepare transparent emulsions with a smaller amount of emulsifier. Please feel free to contact us when you need assistance. [Examples] ■ Preparation of 10% Jojoba Oil O/W Transparent Emulsion ■ Clarification of Medium-Chain Triglyceride O/W Emulsion *For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer