ノイズ研究所（NoiseKen） List of Products and Services

This product is a probe for measuring noise power at the terminals of components with oscillation circuits used to drive automotive electrical/electronic parts, particularly digital processors and switching power supplies. The frequency range is 30MHz-470MHz, with a BNC connector specification. 【Specifications】 ■ Measurement Item: Conducted Emission (Voltage Probe Method) ■ Frequency Range: 30MHz-470MHz ■ Connector: BNC Connector ■ Loss at a probe opening angle of 0°: - Within 2dB (30MHz-240MHz) - Within 4dB (240MHz-470MHz) *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Testing Equipment and Devices

This product is a loop antenna for measuring radiated noise from test samples below 30MHz. It is installed on a non-inductive surface such as a wooden desk for measurement. 【Specifications】 ■ Measurement Item: Radiated Emission (Magnetic Field Antenna Method) ■ Frequency Range: 100kHz to 30MHz ■ Connector: BNC Connector ■ Dimensions: W500×D300×H200 (excluding protrusions) ■ Antenna Wire: 1mm diameter AV wire, 2 turns *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Testing Equipment and Devices

This document provides an overview of the IEC 61000-4-2 Ed.2 testing guidelines for automotive and in-vehicle equipment. This standard applies to the immunity evaluation of electronic devices against electrostatic discharges generated directly from operators or nearby objects under conditions where chemical fiber carpets and clothing are used in low relative humidity environments. It includes detailed explanations of the overview, test levels, specifications of the generator, and verification of output waveforms. [Contents] ■ General Information ■ Test Levels ■ Specifications of the Generator and Verification of Output Waveforms ■ Setup of the Test Equipment ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides information on the testing standards of IEC 61000-4-2 Ed.2. It is a standard applicable for evaluating the immunity of electronic devices against electrostatic discharge generated directly from operators or nearby objects under conditions where synthetic fiber carpets and clothing are used in low relative humidity environments. It includes detailed explanations on test levels, verification of test generators and waveforms, and more. 【Contents】 ■ General Information ■ Test Levels ■ Verification of Test Generators and Waveforms ■ Test Setup ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Other anti-static devices
• Testing Equipment and Devices

This document provides an overview of the testing outlined in IEC 61000-4-4 Ed.3 2012 (for automotive and onboard equipment). It is a standard for evaluating the immunity of electrical and electronic equipment when exposed to rapidly repeating transient disturbances caused by phenomena such as gap discharge due to contact interruption of inductive load devices. The document includes detailed explanations of the overview, test setup, and testing procedures. [Contents] ■ General Information ■ Test Objectives, Methods, and Test Levels ■ Test Generator and Waveform Verification ■ Test Setup ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides information about the IEC 61000-4-4 Ed.3 testing standard. It is a standard for evaluating the immunity of electrical and electronic equipment when exposed to fast repetitive transient disturbances caused by the interruption of inductive load devices and relay contact bouncing. It includes a detailed explanation of the overview, test levels, test generators, and waveform verification. [Contents] ■ General Information ■ Test Procedures ■ Verification of Test Generators and Waveforms ■ Test Setup ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Image Processing Equipment
• Other measurement, recording and measuring instruments

This document provides an overview of the testing outlined in IEC 61000-4-5 Ed.3 2014 (for automotive and in-vehicle equipment). It is a standard for evaluating the immunity of electrical and electronic equipment against overvoltages caused by transients from switching and lightning surges. The document includes detailed explanations of the overview, testing objectives and methods, required levels, as well as the verification of test generators and waveforms. [Contents] ■ General Information ■ Testing Objectives, Methods, and Required Levels ■ Verification of Test Generators and Waveforms ■ Test Setup ■ Test Procedures ■ Test Results and Test Reports *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides information on the IEC 61000-4-5 Ed.3 testing standard. It evaluates the malfunction of electronic devices due to unipolar surges caused by switching and lightning-induced phenomena. It includes a detailed explanation of the overview, test levels, specifications for test generators and waveforms, and more. 【Contents (excerpt)】 ■ General Information ■ Test Levels ■ Specifications for Test Generators and Waveforms ■ Coupling/Decoupling Network and Waveform Specifications ■ Example of Test Setup *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Testing Equipment and Devices
• Other electronic measuring instruments

This document provides information about the IEC 61000-4-11 Ed.2 testing standard. It is an immunity evaluation standard to assess whether electrical and electronic equipment connected to low-voltage power supply networks will malfunction due to power outages, voltage fluctuations, etc. It includes an overview, testing levels, characteristics and performance of test generators, and more detailed explanations. [Contents] ■ General Information ■ Testing Levels ■ Characteristics and Performance of Test Generators ■ Test Setup ■ Test Procedures ■ Test Results and Reporting *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Power Supplies
• EMC Testing

This document provides an overview of the testing outlined in IEC 61000-4-11 Ed.2 2004 (for automotive and in-vehicle equipment). This standard is an immunity evaluation standard to assess whether electrical and electronic devices connected to low-voltage power supply networks will malfunction due to power outages, voltage fluctuations, etc. It includes detailed explanations of the overview, test levels, characteristics and performance of test generators, and more. [Contents] ■ General Information ■ Test Levels ■ Characteristics and Performance of Test Generators ■ Test Setup ■ Test Procedures ■ Test Results and Reporting *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Other anti-static devices
• Testing Equipment and Devices

This document provides an overview of the testing outlined in ISO 7637-2 Ed.3 2011. This standard specifies the evaluation (immunity) and measurement (emission) of the resistance of electronic and electrical equipment installed in 12V or 24V vehicles to conductive electrical transients. It offers detailed explanations on test levels, specifications of the generator, verification of output waveforms, test setup, and testing procedures. [Contents] ■ General Information ■ Test Levels ■ Specifications of the Generator and Verification of Output Waveforms ■ Test Setup and Testing Procedures *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Other anti-static devices
• Testing Equipment and Devices

This document provides information about the ISO 10605 Ed.2 testing standard. This standard specifies testing using a circuit designed to reproduce the current waveform generated during electrostatic discharge from a charged human body to electronic devices. It includes detailed explanations of the overview, test levels, specifications of the generator, and verification of output waveforms. [Contents] ■ General Information ■ Test Levels ■ Specifications of the Generator and Verification of Output Waveforms ■ Test Setup and Testing Procedures *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Other anti-static devices
• Testing Equipment and Devices

This document provides an overview of the testing outlined in ISO 11452-8 Ed.2 2015. This standard pertains to the magnetic field immunity testing of vehicle systems. It evaluates the resistance of vehicle-mounted electronic devices when exposed to magnetic field noise. The document includes detailed explanations of the overview, testing levels, descriptions and specifications of testing equipment, and more. 【Contents】 ■ General Information ■ Testing Levels ■ Descriptions and Specifications of Testing Equipment ■ Test Setup ■ Testing Procedures *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides an overview of the testing outlined in ISO 11452-9 Ed.1 2012. This standard evaluates the resistance of electronic devices installed in vehicles and their connected harnesses to strong electromagnetic fields from portable radios. It includes detailed explanations of the overview, frequency bands, test levels, test setup, and procedures. [Contents] ■ General Information ■ Frequency Bands and Test Levels ■ Test Setup ■ Test Procedures ■ Test Report *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides an overview of the testing outlined in ISO 16750-2 Ed.4 2012. This standard describes the voltage fluctuation immunity of electrical loads for vehicle-mounted equipment (excluding EMC). It offers a detailed explanation of the overview, testing objectives, methods, and required levels. [Contents (Excerpt)] ■ General Information ■ Testing Objectives, Methods, and Required Levels - DC Power Supply Voltage - Overvoltage - Superimposed AC Voltage *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document contains an overview of the CISPR25 Ed.4 2016 testing (for automotive equipment). This standard specifies recommended limit values and measurement methods for radio interference affecting all electrical and electronic components used inside vehicles to protect automotive receivers. The overview includes detailed explanations of the measurement methods for interference waves received by the vehicle's antenna, as well as measurements of components and modules. [Contents] ■ General Information ■ Measurement methods for interference waves received by the vehicle's antenna ■ Measurement of components and modules *For more details, please refer to the PDF document or feel free to contact us.

• Other anti-static devices
• Testing Equipment and Devices

This document provides information about JEC standards. It specifies the insulation resistance testing for equipment connected to power systems, with the aim of protecting electrical facilities, and defines the test voltage and target circuits. It includes detailed explanations of examples of connection to power lines, testing procedures, block diagrams, and waveforms. [Contents] ■ Standards ■ Testing Procedures ■ Block Diagrams and Waveforms *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices

This book will help you understand the testing methods for impulse noise simulators! * It was produced in 2012 and distributed at exhibitions, where it received great acclaim, so we have prepared it again. (Please note that there is a limited quantity available, and it will end once we run out.)

• Testing Equipment and Devices
• EMC Testing

This catalog features EMC test equipment for high-power devices compatible with DC450V and 125A. We introduce various products, including the "Coupling Unit," which allows for noise superimposition testing when combined with the fast transient/burst tester, and the "Lightning Surge Tester," which enables constant switching of decoupling circuit parameters. 【Featured Products】 ■ Coupling Unit (AC500V 150A / DC500V 150A) ■ Coupling Unit (AC600V 300A) ■ DC Power Coupling Dedicated CDN (DC500V 60A) ■ Coupling Unit (AC600V 300A) ■ Lightning Surge Tester (AC500V/100A) ■ Lightning Surge Tester (CHAdeMO compatible AC500V/100A DC600V/100A) *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Testing Equipment and Devices
• EMC/Static electricity measuring equipment