Ｕ．Ｒ．Ｄ．ＣＯ.，ＬＴＤ． Product Lineup

- Split structure that is easy to install even on existing equipment - High transformation ratio CT compatible with 5A to 600A - Built-in overvoltage clamp element - Direct interface with various energy-saving devices, overload prevention systems, etc.

• Sensors

- Terminal type compatible with the compact and lightweight CTL-CLS series - Adoption of output screw terminal structure allows standard products to meet various installation conditions - Nylon spring one-touch clamp type that is easy to install even in existing distribution boards - Safety design equipped with an open protection element to protect against accidental opening of the CT secondary side - A wide variety of through hole diameters from φ10 to φ36, capable of handling up to 600A * Products with φ24 and φ36 can be handled as OEM for output of 1A with a transformation ratio of 100:1 or more.

• Sensors

- RMS calculation type current converter compatible with DC to AC 20kHz - Supports controlled current waveforms such as phase control and PWM - Can be used in conjunction with the HCS-AP series (sold separately) for a versatile type compatible with both AC and DC - Compatible with power supply voltage AC 95 to 24V (50Hz/60Hz sine wave) - Output is a DC value calculated as RMS, with options of 0-5V, 4-20mA, and 2 outputs

• Converters and Transducers

- Sensor and amplifier integrated structure, split type, wire clamp structure - Compatible with ±15V power supply - Despite being a compact split type, it employs a closed loop to achieve high sensitivity and high precision - Output is 0±4V, allowing for direction discrimination - Capable of insulated measurement - Reduces the influence of external magnetic fields by incorporating a shielded case as standard

• Sensors

- Compatible with +5V power supply - Output centered around 2.5V with ±2V (direction can be determined) - Insulation measurement possible - Integrated sensor and amplifier structure; split mounting type

• Sensors

- Compatible with ±15V control power supply - Output is 0±4V for direction detection - Insulation measurement possible - Integrated sensor and amplifier structure, split mounting type

• Sensors

- Wireless power supply from the measurement cable for CT - Elimination of wiring and reduction of installation costs through the integration of clamp structure and wireless communication - No need for battery replacement as it is battery-less - Daily operating cost (electricity) calculation for each device through current measurement - Automatic identification of connected CT allows for retrofitting without the need for configuration - Internal conversion of primary current to output current values, eliminating the need for current correction in subsequent systems - Simultaneous wireless transmission of data from 3 channels of CT - Current value monitoring possible with EnOcean dongle and free software - Up to 3 channels of CT installation possible

• Sensors
• Other electronic parts

Straight pins for horizontal mounting of printed circuit boards, the smallest model in the general measurement CTL universal series.

• Sensors

This is the smallest model in the general-purpose series for mounting ultra-compact PC boards.

• Sensors

It is a general-purpose type for industrial machinery such as heaters and motors.

• Sensors

It is a general-purpose type for industrial machinery such as heaters and motors.

• Sensors

This is a miniaturized version of a φ12 hole output lead wire type.

• Sensors

This is a miniaturized version of the φ12 hole output lead wire type.

• Sensors

This is a miniaturized version of a φ12 hole output lead wire type.

• Sensors

This is an expanded version of the medium-sized series for both PC board and panel mounting.

• Sensors

This is an expanded version of the medium-sized series for both PC board and panel mounting.

• Sensors

This is an expanded version of the medium-sized series for both PC board and panel mounting.

• Sensors

This is a medium-sized series of output lead wire types.

• Sensors

This is a medium-sized series of output lead wire types.

• Sensors

It is a highly versatile small current sensor.

• Sensors

This is a medium-sized series product with a φ24 hole for output lead wire type.

• Sensors

This is a medium-sized series product with a φ24 hole for output lead wire type.

• Sensors

This is the top model of the general-purpose series for large diameter and high current.

• Sensors

This is the top model of the general-purpose series for large diameter and high current.

• Sensors

This is the smallest model of the Z series for mounting on ultra-compact PC boards.

• Sensors

This is the smallest model of the Z series for mounting on ultra-compact PC boards.

• Sensors

This is a small standard product for PC board mounting.

• Sensors

This is a small standard product for panel mounting.

• Sensors

This is a medium-sized series with a φ12 hole suitable for both PC board and panel mounting.

• Sensors

This is a medium-sized series with a φ12 hole for both PC board and panel mounting.

• Sensors

This is a medium-sized series with a φ12 hole for both PC board and panel mounting.

• Sensors

This is a medium-sized series with a φ24 hole for output lead wire type.

• Sensors

This is a medium-sized series with a φ24 hole for output lead wire type.

• Sensors

It is a model for measurement without an amplifier, featuring a high transformation ratio and high output voltage.

• Sensors

This is a miniature model for power detection.

• Sensors

This is a super compact model for current data collection.

• Sensors

This is a super compact model for current data collection.

• Sensors

This is a model for small wideband grounding line monitoring.

• Sensors

This is a medium-sized model for current data collection.

• Sensors

It is a medium-sized model for electrical equipment.

• Sensors

It is a large model for electrical equipment.

• Sensors

This is a lineup of medium to large-sized high current models for electrical equipment.

• Sensors

This is a lineup of medium to large-sized high current models for electrical equipment.

• Sensors

This is a model for panel installation, designed for small high-frequency currents.

• Sensors

This is a model for both PC board/panel mounting, suitable for medium-sized high-frequency current.

• Sensors