フィンテック List of Products and Services

The "Block Line Heater BLH" is an industrial heater that can achieve various sizes and shapes through a combination of small, unitized "block heaters." It can accommodate long sizes, high output, and short sizes, and can produce heaters not only in linear shapes but also in semicircular and ring shapes. This eliminates the cost increases and delivery issues associated with "custom orders." 【Features】 ■ Quick production of long heaters due to unitization ■ Capable of producing heaters with low supply voltages such as 200V and 400V ■ Easy to transport and assemble on-site ■ Power distribution adjustment is possible ■ A wide stock of replacement lamps ensures stable supply *Please feel free to contact us.

• Other heaters

The "BPH" is a block panel heater that can evenly heat flat or 3D surfaces by arranging multiple small heater units. It can accommodate small-scale devices of several kilowatts to large heating units of several thousand kilowatts using standard heater units. This makes embedded design easy and reduces the risks of design and assembly errors, achieving shorter delivery times and lower costs compared to custom solutions. 【Features】 - Achieves a balance of short delivery times, low costs, and high reliability, while also facilitating embedded design. - Can accommodate power supplies of 200V and 400V. - Allows for fine temperature distribution control through voltage adjustments at the heater unit level. *Please feel free to contact us.*

• Other heaters

The "SAHD-10T Series" is a T-shaped version of the small hot air heater "SAHD-10S Series," which has been widely used. The electrical wires from the heater pass through the air tube and are drawn out from the air connection port. In addition to the power and sensor wires, it is also equipped with a ground wire, ensuring safe operation against electric leakage. 【Features】 ■ Electrical wires pass through the air tube and are drawn out from the air connection port ■ Safe operation against electric leakage ■ The risk of fatigue breakage is almost zero ■ Custom orders are available *For more details, please refer to the related link page or feel free to contact us.

• Other heaters

The "SAHD-8T series" is a super compact heater with a neat design that combines air supply, power supply, and temperature sensor lead wires into one unit. Furthermore, thanks to the HD coil and ultra-high heat transfer design, it can produce high-temperature air despite its compact size, exceeding conventional expectations with its high power. Additionally, since the electric wires are not exposed, it has excellent water resistance, chemical resistance, and abrasion resistance, ensuring high safety. 【Features】 - The electric wires are not exposed, providing good water resistance, chemical resistance, and abrasion resistance. - The absence of electric wire outlets on the side of the heater makes it advantageous for installation in narrow spaces. - It is also suitable for operation when mounted on robots. - The air passing through the tube cools the wires and recovers heat. - If heat-resistant materials are used for the tube, it can be used in high-temperature environments. *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document introduces the characteristics of representative hot air heaters. It includes graphs illustrating the relationship between supply voltage, air flow rate, and hot air temperature, as well as the hot air temperature characteristics in relation to air supply pressure, hot air temperature characteristics, supply pressure, and heating element temperature sensors. [Contents] ■ Relationship between supply voltage, air flow rate, and hot air temperature - SAH100v-350w/10AH - SAH200v-440w/10AH ■ Required supply pressure and the inner diameter of the hot air outlet: SAH200v-440w/10BH/φ □ ■ Relationship between air flow rate and required pressure (when not powered): Measured for various heaters *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document will explain the basic usage and precautions of air heaters, as well as advanced applications of air heaters. It includes easy-to-understand illustrations of the simplest and ideal usage methods. If you are considering an air heater, please make use of this information. If you have any questions, feel free to contact us. [Contents] ■ The simplest usage method ■ Ideal usage method ■ Connection diagram (an example of the simplest connection method) ■ 1. Supply compressed gas ■ 2. Apply voltage - About voltage adjustment methods - When using a temperature controller ■ 3. Blow hot air onto the object to be heated *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document introduces the characteristic data of the SAH200v-6kw/15＊6PH. It includes graphs showing the hot air temperature in relation to the supply voltage, the temperature of the metal case (data at 200L/min), and the relationship between air flow and required pressure. Please note that the measurement data in this report is based on a single heater, so the accuracy and reliability are not sufficient; consider it as a reference only. [Contents] ■ Hot air temperature in relation to supply voltage ■ Temperature of the metal case (data at 200L/min) ■ Relationship between air flow and required pressure ■ Temperature readings from the heating element temperature sensor ■ Hot air temperature and the temperature of the hottest part of the heating element at that time *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document is the instruction manual for the halogen spot heater "LHW type." It includes safety precautions, information about compatible lamp heaters, and cooling methods. Please make use of this manual for handling and considering the halogen spot heater "LHW type." [Contents] ■ Safety precautions ■ Information about compatible lamp heaters ■ Cooling methods ■ About the mirror surface ■ How to replace the lamp heater in case of a disconnection (same for new installations) *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document introduces the halogen spot heater "HSH-30." Our halogen spot heater focuses the light from a halogen lamp using a concave mirror (gold mirror) to achieve high temperatures. We have included specifications, explanations, and the user manual (air-cooled type). [Contents] ■ Halogen Spot Heater HSH-30 Specifications ■ Halogen Spot Heater Explanation Document ■ Halogen Spot Heater HSH-30/f15/24v-75w Specifications ■ Halogen Spot Heater HSH User Manual (Air-Cooled Type) *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

This document introduces the relationship between sensor position and measured temperature in the CLH200v-1.5kw. We investigated the relationship between the sensor (K thermocouple) position and measured temperature in the CLH200v-1.5kw/38PH. The document includes the measurement method, conclusions, discussions, and proposed countermeasures. It provides clear explanations with diagrams and illustrations. [Contents] ■ Purpose ■ Measurement Method ■ Results ■ Conclusion ■ Discussion ■ Proposed Countermeasures *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "SAHD-8 Series" is a hot air heater that can handle various preheating, heating processes, brazing, welding, cutting, evaporation, and drying at a low cost. This new model has been developed to cover the most demanded 500W range under optimal conditions. It is slimmer, capable of ultra-high temperatures, and has high output compared to conventional products. The heating elements, insulation tubes, and quartz tubes that make up the heater are slim, resulting in high shock resistance, allowing it to withstand vibration shocks from harsh overseas transportation. It also demonstrates strong durability when mounted on robots for operation. 【Features】 ■ Ultra-high density HD heating element ■ High wind pressure resistance design with an outer diameter of φ6mm ■ Convenient use of inexpensive commercially available needle nozzles and various standard attachments ■ High shock resistance ■ Designed with mass production and high reliability in mind *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

Introducing a set of ultra-high temperature 1100℃ hot air heater and controller. The heater "SAHD200v-1kw/10PS/HT/+SC(R)" can handle various preheating, heating processes, brazing, welding, cutting, evaporation, drying, etc., at an ultra-low cost. It can be used in various factories, laboratories, and research facilities, including electrical, mechanical, automotive, and semiconductor industries. Please consider it when you need more than +100℃ compared to our conventional hot air heaters. Additionally, we offer a dedicated controller "FCM-N type" that can simultaneously control air flow and hot air temperature. 【Features】 <Ultra-high temperature hot air heater> ■ Adopts ultra-high performance heating element "HD" ■ SAHD200v-1kw/10PS/HT/+SC(R) ■ Metal case φ16 <Dedicated controller> ■ Simply specify the hot air temperature and heater output (%) ■ Easy operation with ultra-high stability ■ FCM-N dedicated specifications ■ Settings that suppress overshoot ■ R thermocouple *For more details, please refer to the documentation or feel free to contact us.

• Other heaters

In the control of hot air heaters, it is common to perform "air flow control using mass flow controllers" and "temperature control of hot air," but issues such as high costs and variations in thermal output of about ±15% due to fluctuations in temperature measurement accuracy are challenges. The 'FCM-N type' is a controller for hot air heaters that enables automatic control of air flow based on the set thermal output and temperature provided to the workpiece. It features high stability with no fluctuations in thermal output, making it suitable for long-term continuous operation. 【Features】 ■ Allows precise setting of output thermal energy to the workpiece regardless of temperature measurement accuracy ■ No mass flow controller required ■ Stable thermal output even during heater replacement ■ Compatible with voltages from AC100V to 240V ■ Supports hot air pulse blow using pulsation For more details, please refer to the catalog or feel free to contact us.

• Other heaters

The "halogen spot heater" concentrates the light from a halogen lamp to generate heat, achieving high temperatures of 1400°C to 1500°C depending on the conditions. Additionally, the temperature can be controlled arbitrarily from room temperature to the maximum temperature based on the supply voltage. Since lamp heating is non-contact heating, it allows for completely clean heating and heating in a vacuum. 【Features】 ■ High temperatures of 1400°C to 1500°C are possible depending on conditions ■ Temperature can be controlled arbitrarily based on the supply voltage ■ Allows for completely clean heating and heating in a vacuum *For more details, please download the PDF or feel free to contact us.

• Other heaters

The "Hot Air Heater S Series (SAHD-10S/SAHD-15S)" is a hot air heater that uses the ultra-high-performance heating element "HD." Compared to the conventional SAH type, it is half the size, has a maximum hot air temperature that is 100°C higher, and has wind pressure resistance that is over 20 times greater. Yet, the price remains the same as conventional products. With the SAHD, a high-reliability +LL specification is also available for selection. Since it heats at ultra-high temperatures, it can be used as a substitute for gas burners in the overheating and brazing of molds, which were traditionally done with gas burners. 【Features】 - Adoption of the ultra-high-performance heating element "HD" - Achieves ultra-compact size that is half the size of conventional products - Wind pressure resistance is over 20 times greater than conventional products - High performance at the same price as conventional products *For more details on the "Hot Air Heater S Series," please refer to the PDF data available for download.

• Other heaters

The "Light Heating Dedicated Controller HLC Series (HLC-LN/MN/HL)" is a power controller for halogen lamps. It allows for optimal and flexible control of light heating devices that use halogen lamps. Due to the large inrush current that flows during normal operation, having a controller extends the lamp's lifespan and reduces the impact on the power supply side. 【Features】 ■ Optimal and flexible control of light heating devices ■ Extended lamp lifespan ■ Reduced impact on the power supply side *For more details on the "Light Heating Dedicated Controller HLC Series," please refer to the PDF data available for download.

• Other heaters

Spot Concentrating (Point Concentration / Circular Concentration) Halogen Lamp Heating Unit ■□■Features■□■ ■By concentrating the light of the halogen lamp at a single point, high temperatures of 1400°C to 1500°C can be achieved under favorable conditions. Additionally, the temperature can be controlled arbitrarily based on the supply voltage. ■Since heating is done non-contact through light, it allows for completely clean heating and heating in a vacuum. ■The size of the spot is determined by the lamp and mirror size, as well as the focal length, but special optical designs can be implemented to widen the irradiation range or create arbitrary distributions. ■The power supply voltage and output of the lamp can be designed as needed, with a maximum output of approximately 2.5 kW. ■For more details, please contact us.

• Other heaters

This is a lamp heater unit using a line focus type (linear focus, band focus) halogen lamp. It uses a rod-shaped halogen lamp to heat by focusing the light in a linear or band shape. The heating length can be made to any specification, with a maximum length of 2000mm to 3000mm possible. <Features> ■ Uses rod-shaped halogen lamp ■ Power voltage and output can be designed as needed ■ Output up to 20kW ■ Heats by focusing light in a linear or band shape *For more details, please feel free to contact us.

• Other heaters

Halogen Lamp for Light Heating (Lamp Heater) ■□■Features■□■ ■The light source (filament) reaches temperatures of 2500°C to 3000°C. By effectively concentrating this light, it can achieve non-contact clean heating of approximately 1300°C to 1500°C. ■The temperature can be precisely controlled from zero to maximum through voltage adjustment. ■When a halogen lamp is used as a heater, it is referred to as a "lamp heater." Essentially, there is no difference from standard halogen lamps used for lighting. ■For more details, please contact us.

• Other heaters

Introducing the standard type heater for hot air heating. ■□■Features■□■ ■The basic structure consists of a hot air heater unit (single heating tube type) housed in a stainless steel pipe case, with a metal tapered screw adopted as the air inlet. ■The varieties (capacities) are widely available from around 100W to approximately 8kW: - 100W to 800W type → Metal case outer diameter φ13 - 650W to 1.2kW type → Metal case outer diameter φ19 - 2kW to 7kW type → Metal case outer diameters φ22, φ34, φ42.7 ■For more details, please check the catalog or contact us directly. (Mentioning "Ipros" will facilitate the conversation.)

• Other heaters

High-capacity air heater designed to meet requirements for short dimensions ■□■Features■□■ ■The basic structure consists of six air heaters arranged in parallel within a metal case. ・With this structure, for example, a 10 kW air heater can fit within a total length of 300 mm. ・Outer diameter is φ60 mm. ■High-capacity models can also be easily manufactured, with air heaters capable of exceeding 50 kW. ・Lightweight design is another feature, allowing even the 30 kW type to be held with one hand. ■Due to the parallel connection of the six heaters, it can accommodate various power specifications. ・Compatible with three-phase and single-phase power supplies of various voltages. ■For more details, please contact us.

• Other heaters

Heater that eliminates the release of dust and gas to the extreme ■□■Features■□■ ■Since the heating element, sensor, and electrical wires do not come into direct contact with the heated fluid, it can be used for heating water vapor and some corrosive gases. ■The heating element and temperature sensor are sealed inside the inner quartz tube. ■Air is indirectly heated by passing through the gap between the inner quartz tube and the outer quartz tube. ■It is very tough compared to regular heaters, but usage conditions are limited to those that can withstand materials such as metal cases (made of stainless steel), quartz glass, and heat-resistant rubber (Viton, silicone). ■For more details, please contact us.

• Other heaters

Hot Air Heater Controller ■□■Features■□■ ■Basically custom-made, but by keeping common parts in stock, we can respond with a relatively short delivery time (approximately 10 days). ■Since it is intended for use on production lines, we carefully select and prioritize reliability and functionality over price when choosing components. The circuit configuration and assembly processes are also designed to achieve the highest functionality and reliability. ■As it is fundamentally custom-made, we can add or remove various functions based on your requests. ■Considering long-term use and enabling modifications and repairs by users, we disclose all information about components and circuits as much as possible. ■For more details, please contact us.

• Other heaters

Heaters using platinum or platinum alloys (platinum - 13% rhodium) can also be manufactured. Platinum can be used in air at temperatures close to 1700°C, so when used in hot air heaters, it can produce hot air exceeding 1000°C.

• Other heaters

It is a combination of a hot air heater (100v-1kw type) with a high-efficiency air pump and a dedicated controller. Since everything you need is combined, you can use it immediately by simply connecting it to a power source (AC100v).

• Other heaters

The SAHD-S series hot air heater is a hot air heater that adopts the ultra-high-density heating element "HD-coil," which has obtained a basic patent. Our conventional SAH type was overwhelmingly compact compared to other similar products, but this product has further reduced the heater's external dimensions to 1/2 to 1/4 of the previous size! Additionally, by supplying compressed air and electrically heating it, stable hot air can be obtained immediately. The larger models can achieve a maximum hot air temperature of 1100°C and a continuous use temperature of 1000°C, while even the smaller models can provide hot air at 900°C. It is a wide range of products with a single heating element that spans from 100W to 9kW. <Features> ■ Any hot air up to 1100°C ■ Adoption of high-density, high-temperature, high-strength HD-coil ■ Detachable protective tube (metal case) ■ Hot air temperature sensor (thermocouple) can be incorporated ★ The 18S series and 23S series have also been newly added! *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The ultra-compact and high-temperature hot air heater "SAH, SAHD type" achieves approximately half the size of conventional heating elements due to the ultra-high-density heating element HD-Coil. The HD-Coil is a heating element that is about half the size of conventional ones, with a high strength approximately 20 times greater than conventional elements, and it also reduces heat loss by about half. 【Features】 ◆ Heating element size is approximately half ◆ Heat loss is also about half ◆ High lifespan due to electrical insulation of the coil ring, preventing electrical sparks 【For more details, please download the catalog or feel free to contact us】 　　　　　↓　↓　↓　　　　　　　　　　　　↓　↓　↓

• Other heaters