トランシー List of Products and Services

The "CWT LF Series" is a non-contact AC current probe designed for low-frequency measurements, extending from 0.1 Hz to 6 MHz. Like the conventional series, it features a detachable, thin, and flexible clip-shaped coil that can reproduce current waveforms with rapid rise times, such as pulse currents, making it suitable for power electronics development. It can measure ranges that cannot be measured by the CWT Standard Series and CWT Mini Series, such as small currents at 50 Hz/60 Hz and sine wave currents with lower phase shifts. 【Features】 ■ Extends the low-frequency range from 0.1 Hz to 6 MHz ■ Detachable, thin, and flexible clip-shaped coil ■ Can reproduce current waveforms with rapid rise times, such as pulse currents ■ Suitable for power electronics development ■ Measures ranges that cannot be measured by the CWT Standard Series and CWT Mini Series *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The "CWT Mini" is a clip-shaped AC current probe capable of measuring current in tight spaces, such as circuit components. It directly connects the output of instantaneous voltage at ±6V to an oscilloscope, data acquisition device, DVM, or power recorder. The measurement current range is from 300mA to 30kA, with a reading accuracy of ±2%. The DC offset voltage is less than 2mV within the operating temperature range. 【Features】 ■ LF (-3dB) frequency range expanded to below 1Hz ■ Expansion of HF (-3dB) frequency range (up to 20MHz for a 100mm coil, and up to 15MHz for a 200mm coil) ■ Peak di/dt performance increased to 40kA/μs ■ 2kV withstand voltage for a 3.5mm cross-section diameter, and 5kV withstand voltage for a 4.5mm cross-section diameter ■ Peak current customizable up to 300kV *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The "CWT Mini50HF" is a measuring instrument that has an electrostatic shield built into the coil, which can suppress voltage interference. By using this product, it is possible to reduce unnecessary voltage disturbances caused by capacitive coupling from certain voltage sources during current measurements. As a result, it is less susceptible to noise, allowing for accurate current measurements. Additionally, the measurable rise time is between 10 to 50 ns, and the HF frequency characteristics have been expanded to (-3dB) 50 MHz, making it suitable for measuring next-generation power semiconductors such as SiC and GaN. 【Features】 ■ Built-in electrostatic shield in the coil ■ Suppresses voltage interference ■ Enables accurate current measurements ■ Measurable rise time of 10 to 50 ns ■ HF frequency characteristics expanded to (-3dB) 50 MHz *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Ammeter
• Other anti-static devices

The "CWT MiniHF" is an AC current probe capable of measuring in tight spaces. By using an electrostatic shielded Rogowski coil, it can accurately avoid 50/60Hz voltage. Additionally, the peak current can be customized up to 300kA. It can be utilized in various applications, including measuring switching current waveforms of power electronics devices, developing and monitoring power converters, and measuring small AC currents within large DC currents. 【Features】 ■ Electrostatic shielded Rogowski coil ■ Expanded HF (-3dB) frequency range - Expanded up to 30MHz (100mm coil), 23MHz (200mm coil) ■ Improved peak di/dt performance up to 100kA/μs ■ Temperature range: -40℃ to +125℃ ■ Peak current customizable up to 300kA *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The "CWT Standard" is a wideband AC current probe suitable for the development of power electronics. It features a detachable, thin, and flexible clip-shaped coil that reproduces fast-rising current waveforms such as sine, pseudo-sine, and pulse charging. It can be used for monitoring current waveforms of semiconductor switches, measuring pulse currents, and measuring harmonic current components. 【Features】 ■ Measurement current range: 300mA to 300kA ■ Frequency range: 0.1Hz to 16MHz ■ Easy to insert the probe even in narrow spaces ■ Structure that securely locks the coil ■ Does not adversely affect the circuit *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The "CWT Ultra Mini Series" is an ultra-thin clip-shaped AC current probe capable of measuring the distance between pins in semiconductor devices such as the T0220 package. It is ideal for measuring excessive currents in electronic devices, sinusoidal (sine wave) currents, and pulse currents ranging from 1 to 12.0 kA. Additionally, it can be used for measuring small AC currents within large DC currents, as well as for the development and monitoring of power converters. 【Features】 ■ Temperature range -40℃ to +125℃ (coil and cable) ■ Wide frequency range from a few Hz to 30 MHz ■ Current range from peak 30 A to 12.0 kA ■ Maximum peak di/dt of 70 kA/μs ■ Maximum coil cross-section of 1.7 mm ■ Reading accuracy of ±2% *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The "DC Flex Current Probe" is an economical and advanced product that allows for easy measurement simply by wrapping a detachable coil around the conductor. It is thin and flexible, making it easy to use even in tight spaces due to its detachable coil. It boasts an accuracy of ±1% with a single measurement. With its direct current insulation structure, it is very safe, and it comes with a display, eliminating the need for an external monitor. 【Features】 ■ Thin and flexible, easy to use in tight spaces due to the detachable coil ■ Accuracy of ±1% ■ Very safe due to the direct current insulation structure ■ No need for an external monitor as it comes with a display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• probe
• Ammeter

The flux gate sensor manufactured by Premo is a current sensor that uses a high-permeability magnetic material (core) and employs technology to detect magnetic fields with high sensitivity. It has a higher magnetic field strength detection sensitivity than Hall effect sensors and maintains high resolution. The main specifications are: sensitivity: less than 0.1%, linear error: less than 5ppm, offset current: up to 5uA, measurement bandwidth: DC to 100KHz (-3dB).

• Other processing machines
• Other Auto Parts
• DC Motor

Compliant with RoHS standards. You can easily combine designs according to your preferences, and the height can also be adjusted. Waterproof and dustproof performance compliant with IP67. A long-lasting switch with a lifespan of 10 million cycles.

• switch

The IrgasakiT infrared gas sensor adopts a dual-beam system and is suitable for measuring the concentration of several hydrocarbons (HC) such as carbon dioxide and methane. Since there are no moving parts, it minimizes drift during long-term use, operates with low power consumption, and has a fast response time. Additionally, it comes with a temperature compensation function.

• Other process controls
• Other environmental equipment

This is a waterproof and dustproof trackball and joystick with excellent durability, compliant with IP67 standards. It offers exceptional operability, and the trackball is nearly a perfect sphere, available in a variety of sizes. Both units and individual components like the ball or stick can be provided.

• Expansion Boards

A switch that is oriented in four directions and boasts a long lifespan capable of withstanding 10 million cycles. It has obtained IP67 certification and can operate in temperatures ranging from -40 to 160°C. You can choose your preferred color from a total of 10 colors.

• switch

This is the world's first next-generation trackball utilizing electromagnetic induction. Unlike traditional mechanical and optical types, it has no contacts due to the electromagnetic induction method, preventing any intrusion of substances through gaps, and it is completely unaffected by vibrations, making it the best trackball that can be used in any harsh environment.

• Expansion Boards

DYNEX's IGBT modules can handle large currents, with options available up to 3600A, and they also offer 20 types of fast recovery diode modules used as freewheeling diodes in IGBT inverters. The production line features a wide variety of options, including single switches, choppers, dual-pack configurations, half-bridges, and bidirectional (matrix type) designs. In terms of functionality, they provide various types including standard, trench gate (low loss), and soft punch-through (high reliability).

• Other semiconductors

The switch has a waterproof cover with an IP67 rating. It boasts an ultra-long lifespan and high durability of 10 million cycles. Various types of LEDs and colors are available to choose from, with 30 different colors. We also offer a variety of designs unique to Denmark.

• switch

1. Switching speed in the +1 second range 2. Rectification speed in the +1 second range 3. IGBT up to 2500V 4. Insulated heat dissipation type package 5. High-speed driver in the 45MHz range

• Other semiconductors

We offer over 600 models as catalog items, with a wide range of standard stock available for immediate delivery.

• power supply

EBG resistors provide appropriate temperature adjustment and power voltage characteristics, high safety, HTO (High Temperature Operation technology that removes noise in real-time at high temperatures specific to semiconductors), and top-level resistance value tolerance (an indicator that shows the precision of resistance values and guarantees the range of variation in resistor values). Additionally, all products meet environmental surveys according to American and European mill standards.

• Other industrial robots
• Other electronic parts
• electromagnet

This device continuously measures the current waveform flowing through a low-voltage three-phase AC commercial power line (50/60Hz) and outputs it to an oscilloscope, data acquisition card, and power analyzer to monitor the current status continuously. The target currents are of seven types: 500/1000/2500/5000/10000/25000/50000A, with voltages up to 2kV. The bandwidth ranges from 0.6Hz to 800kHz. The accuracy is ±10%, with a low phase angle of 0.9 degrees, and it weighs 450g. The main unit can be mounted freely on a DIN rail or panel mount. The three-phase input side features a loop-snap type, making connection to the power line easy. With no moving parts, the lifespan is virtually permanent.

• Other process controls

Lightweight, thin, high density, low heat generation, high frequency compatible. The manufacturer, Payton, is a company based in Israel.

• Converters and Transducers
• transformer

Power grade, achieving 6500V and 3600A in the field of power IGBTs as a high voltage and high current semiconductor manufacturer. In particular, the bidirectional AC switch for matrix converters is at a world-class level. Additionally, the company excels in phase control thyristors, rectifier diodes, GTO thyristors, and fast thyristor diodes.

• Other semiconductors
• diode

You can easily detect alternating current waveforms just by wrapping the coil part around the target object. The expanded measurable current range is from 300mA to 300kA, with an effective frequency range of 1Hz to 13MHz (the higher models go up to 15MHz). The new LF (low-frequency model ranges from 0.1Hz). The coil section has a withstand voltage of 10kV. Connection to the oscilloscope is made via the included BNC cable. The power supply now uses four AA batteries, making it even more user-friendly.

• Electrical Instruments/Electrometers

This type of solid switch, capable of handling high voltage and large current, is very difficult to manufacture, and currently, it is only available from Behlke GmbH (Germany) worldwide.

• Other semiconductors

High voltage capacitor 2kV-60kV Capacitance: Charge/discharge 0.38-160μF Smoothing 0.018-90μF With self-healing (SH) function

• Other process controls
• Capacitor
• Converters and Transducers

A switch that allows you to easily change the design combinations according to your preferences. The height can also be adjusted. It will revolutionize the design of the control panel. It has IP67 compliant waterproof and dustproof performance. The crisp click feel is unique to Denmark. It has high durability with 10 million cycles. There are also options with gold contacts.

• switch

FABRIMEX's DC/DC converters are available from 1W to 200W, and there are two types: single and dual. Additionally, there are unit types that can accommodate various applications.

• Converters and Transducers
• Other electronic parts