リンシュンドウ List of Products and Services

■Dust Collector for Laser Engraving: Max Screen Bo 2S The Max Screen Bo 2S has achieved significant miniaturization and cost reduction. It completely eliminates unpleasant odors during processing of materials like rubber, and there is no need for outdoor exhaust. The Max Screen Bo 2S is a dust collector that removes odors. It can operate continuously for 24 hours and is compact yet high-performance. It contributes to the miniaturization of devices that have been in high demand in recent years. Of course, it can be used with the same performance at both 50Hz and 60Hz.

• Other processing machines

■Dust Collector for Laser Engraving: Maxscreen Bow 2 The Maxscreen Bow 2 is the successor to our Maxscreen Bow and Maxscreen Bow Mini. It has been enhanced for higher performance, while achieving significant miniaturization and cost reduction compared to the Maxscreen Bow. It completely eliminates unpleasant odors generated during processing of materials like rubber, and there is no need for outdoor exhaust. The Maxscreen Bow 2 is a dust collector that completely removes odors. Even in situations where high-viscosity fumes, such as those from laser processing, can easily clog filters, it maintains suction power for an extended period without decline.

• Other processing machines

The Max Screen Bow 2 has been significantly reduced in price. It cuts down on unpleasant odors during processing. The Max Screen Bow 3 is a dust collector that removes odors. Even in usage situations that easily cause filter clogging, such as with highly adhesive fumes from laser processing, it maintains suction power for a long time without decline. It has functions that are almost equivalent to those of the Max Screen Bow 2, and has successfully achieved a significant price reduction. There are no complicated operations, so anyone can easily use it. It collects dust with two filters (dust collection rate: approximately 99%) and deodorizes by passing through an activated carbon cassette (deodorization rate: approximately 60%).

• Other processing machines

Adhesive Fume Compatibility Unlike typical dust collectors that can clog with adhesive fumes during laser marking, this system is less prone to clogging and demonstrates stable dust collection performance. It employs an electret (charged non-woven fabric) filter. Filters and deodorants can be replaced without tools, allowing for a dust pack-like experience without getting your hands dirty. It features a built-in activated carbon box that effectively deodorizes unpleasant odors generated during laser marking.

• Other processing machines

Dust collector for TODC-6L/FL This is a dust collector that can be optionally equipped with the RSD-SUNMAX-FL series. Under the strong negative pressure of the turbo blower, the dirty air first hits the air inlet spoiler. This acts as turbulence for the incoming air, slowing down the airflow. Due to gravitational settling, coarse dust particles fall directly into the large particle dust opening, which serves the role of pre-dust removal. After fine, low-density dust particles enter the dust filter room, the dust in the air remains on the surface of the filter element. The filtered clean air enters the air room and is collected through the exhaust pipe via the fan.

• Other processing machines

Dust collector for TODC-4L/FL. This is a dust collector that can be optionally equipped with the RSD-SUNMAX-FL series. Under the strong negative pressure of the turbo blower, the dirty air first hits the air inlet spoiler. This acts as a turbulence for the incoming air, slowing down the airflow. Due to gravitational settling, coarse dust particles fall directly into the large particle dust opening, serving as a pre-removal for the dust. After fine, low-density dust particles enter the dust filter room, the dust in the air remains on the surface of the filter element. The filtered clean air enters the air room and is collected through the exhaust pipe via the fan.

• Other processing machines

VN-30SD/Dust Explosion Pressure Relief Type Dust Collector Dust collection applications for explosive and flammable powders excluding magnesium - Aluminum - Aluminum alloys - Titanium - Cornstarch - Epoxy resin - Fine coal, etc. Dust Explosion Pressure Relief Type Dust Collector Sewing filter & manual dust removal specification. The aluminum fan casing and explosion-proof motor prevent spark generation inside the dust collector, making it less likely to cause dust explosions.

• Other processing machines

PiE-30SDN/Dust Explosion Pressure Relief Dust Collector Dust collection applications for explosive and flammable powders excluding magnesium: - Aluminum, - Aluminum alloys, - Titanium, - Cornstarch, - Epoxy resin, - Fine coal, etc. Intelligent type dust explosion pressure relief dust collector It notifies you of the filter replacement timing and operating data. With aluminum fan casing and dust explosion-proof motor, it prevents spark generation inside the dust collector, making it less likely to cause dust explosions.

• Other processing machines

PiF-30D/Dust Explosion Pressure Relief Dust Collector Dust collection applications for explosive and flammable powders excluding magnesium - Aluminum, - Aluminum alloys, - Titanium, - Cornstarch - Epoxy resin, - Fine coal, etc. Intelligent type dust explosion pressure relief dust collector It notifies you of the filter replacement timing and operating data. With aluminum fan casing and dust explosion-proof motor, it prevents spark generation inside the dust collector, making it less likely to cause dust explosions.

• Other processing machines

RSD-SUNMAX-KW3030 / High-Performance CNC Router The CNC Router RSD-SUNMAX-KW3030 is a compact machine that achieves low cost and space-saving design. It features a water-cooled spindle, offering high speed, low noise, and long lifespan. The three axes are equipped with high-precision ball screws, providing stable performance with a rational structure. Additionally, an electric spindle and drive control system can be integrated as needed.

• Other processing machines

RSD-SUNMAX-KW1325AT/CNC Router The CNC Router RSD-SUNMAX-KW1325AT maintains high speed, high precision, and stability in machine tools due to its excellent design and high-quality components. The entire machine employs rectangular tube welding, followed by fine machining after heat treatment. It ensures high dynamic characteristics of the machine tool by using a fixed working table, a movable gantry, consistent inertia, and a double screw nut driver.

• Other processing machines

RSD-SUNMAX-KW2516GS / Vibration Cutting Machine The vibration cutting machine RSD-SUNMAX-KW2516GS can achieve high-speed, high-intelligence, and high-precision cutting, punching, and drawing processes. It is the best product for processing various types of materials with a diverse range of tools, suitable for multi-industry calibration, sample processing, and small-lot production. Its compact body and learning function for operation also contribute to reducing maintenance costs.

• Other processing machines

RSD-SUNMAX-LT1390 RD/Small CO2 Laser Processing Machine The RSD-SUNMAX-LT is a budget type of the SUNMAX series laser processing machines. Unlike the GS and RS types, it uses a frame-structured casing to keep manufacturing costs down. Additionally, by simplifying functions and accessories, it aims to reduce costs. There is no significant difference in processing capabilities, processing accuracy, or the quality of laser processing compared to the GS and RS series. The LT series is roughly divided into two types of lineups. LT5030・6040: A compact 40W laser processing machine that can be carried by two adults. LT1390: An 80W laser processing machine capable of processing a wide work area of 1300 x 900mm. ■Supports layer processing ■Uses a water-cooled laser tube ■Uses a high-performance laser tube

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-LT is a budget type of the SUNMAX series laser processing machine. Unlike the GS and RS types, it uses a frame-structured casing to keep manufacturing costs down. Additionally, by simplifying functions and accessories, it aims to reduce costs. There is no significant difference in processing capabilities, processing accuracy, or the quality of laser processing compared to the GS and RS series. The LT series is roughly divided into two types of lineups. LT5030 and 6040: a compact 40W laser processing machine that can be carried by two adults, designed for tabletop use. LT1390: an 80W laser processing machine capable of processing a wide work area of 1300 x 900mm. - Supports layer processing - Uses a water-cooled laser tube - Uses a high-performance laser tube

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD1332D-150W/CO2 Laser Cutting Machine ■ Cutting Table A table for cutting operations. It reduces damage from laser reflections. ■ Honeycomb Table A honeycomb-shaped suction work table. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes the laser output. ■ Air Compressor Blows air onto the laser irradiation spot to extinguish flames. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the machine to the exhaust fan.

• Laser marker
• Other processing machines
• Other markings

RSD-SUNMAX-RD1325D-150W (CO2 Laser Cutting Machine) ■ Cutting Table This is a table for cutting operations. It reduces damage from laser reflections. ■ Honeycomb Table This is a honeycomb-shaped suction work table. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes the laser output. ■ Air Compressor Blows air onto the laser irradiation spot to extinguish flames. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the machine to the exhaust fan.

• Other processing machines
• Other markings

RSD-SUNMAX-RD7050RF-30W/CO2 Laser Processing Machine Common Accessories for RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focusing. ■ Table Lifting Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes. Reduces damage from laser reflection. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table. Allows for the adhesion of processing materials and the removal of dust and debris during processing. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes the laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot to extinguish flames. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table and the exhaust fan.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD7050-60W (Water-cooled) RSD-SUNMAX-RD7050-30W/60W (Air-cooled) Common Accessories for RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focusing. ■ Table Lifting Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes that reduces damage from laser reflections. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table that allows for the adhesion of processing materials and the removal of dust and debris during processing. ■ Automatic Water Cooling Device Used for water cooling the laser tube. The water temperature management function stabilizes the laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot for flame suppression. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table to the exhaust fan.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD9060-80W/CO2 Laser Processing Machine It is capable of a wide range of processing, including cutting and engraving. It supports various materials and is used across a wide range of industries. ■ Supports inclined engraving Inclined engraving refers to the process of adding an incline to the cross-section of a surface during engraving. This feature allows for the automatic addition of shoulders necessary for creating items like rubber stamps. Additionally, by setting the incline width arbitrarily, different effects can be achieved compared to standard engraving. ■ Optimizes processing order Even if the data contains multiple layers and mixed processing modes, processing can be performed in the optimal order for each object, regardless of the layer processing order. ■ Uses water-cooled laser tube

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD1290-80W/CO2 Laser Processing Machine Common Accessories for RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focusing. ■ Table Elevation Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes. Reduces damage from laser reflections. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table. Allows for the adhesion of processing materials and the removal of dust and debris during processing. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes the laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot for flame suppression. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table to the exhaust fan.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD1490-150W/CO2 Laser Processing Machine Common Accessories for RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focus adjustment. ■ Table Lifting Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes. Reduces damage from laser reflection. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table. Allows for the adhesion of processing materials and the removal of dust and debris during processing. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes the laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot for flame suppression. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table and the exhaust fan.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD1812-150W/CO2 Laser Processing Machine Common Accessories for RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focusing. ■ Table Lifting Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes. Reduces damage from laser reflections. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table. Capable of adhering processing materials and removing dust and debris during processing. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot for flame suppression. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table and the exhaust fan.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-RD7050RF-30W/CO2 Laser Processing Machine Common Accessories for the RSD-SUNMAX-RD Series ■ Red Pointer Indicates the laser irradiation spot with red light, making positioning easier. ■ Auto Focus Automatically adjusts the height of the work table for focus alignment. ■ Table Lifting Device Changes the height of the work table electrically to accommodate materials of various thicknesses. ■ Cutting Table A table for cutting processes. Reduces damage from laser reflection. ■ Vacuum Honeycomb Table A honeycomb-shaped suction work table. Allows for the adhesion of processing materials and the removal of dust and debris during processing. ■ Automatic Water Cooling System Used for cooling the laser tube. The water temperature management function stabilizes laser output. (Excluding RD7050RF) ■ Air Compressor Blows air onto the laser irradiation spot for fire suppression. ■ Exhaust Fan Exhausts air from inside the machine. ■ Duct Connects the honeycomb table and the exhaust fan.

• Laser marker
• Other processing machines
• Marking machine

RSD-SUNMAX-UVZH/UV Laser Marking Crystal engraving, which was previously impossible, is now possible. In addition to crystal, a wide range of materials can also be processed. High-speed laser processing is possible, and standard processing can be completed in just a few seconds. The marking area is 100mm square. It is a compact tabletop model, making it suitable for installation in offices, and it requires very little maintenance.

• Laser marker
• Other markings
• Other processing machines

RSD-SUNMAX-FL60MOPA color (Fiber Laser Marker) 60W It can perform anodized engraving, deep engraving with hand tools, deep engraving on aluminum, surface engraving in black on stainless steel, IC table engraving, and creating titanium seals. Additionally, it can also engrave on metal rings using the included rotary attachment. It is compatible with processing materials with inner and outer diameters ranging from φ25 to 80.

• Laser marker
• Marking machine
• Other processing machines

RSD-SUNMAX-FL30 (Fiber Laser Marker) 30W It can perform anodized engraving, deep engraving with hand tools, deep engraving on aluminum, surface engraving in black on stainless steel, IC table engraving, and creating titanium seals. Additionally, it can also engrave on metal rings using the included rotary attachment. It is compatible with processing materials with inner and outer diameters ranging from φ25 to 80.

• Marking machine
• Laser marker
• Other processing machines

RSD-SUNMAX-FL50 (Fiber Laser Marker) 50W It can perform anodized engraving, deep engraving with hand tools, deep engraving on aluminum, black surface engraving on stainless steel, IC table engraving, and creating titanium seals. Additionally, it can also engrave on metal rings using the included rotary attachment. It supports processing materials with inner and outer diameters from φ25 to 80.

• Laser marker
• Marking machine
• Other processing machines

RSD-SUNMAX-FL1325L (Low Power Type) ■ High-performance control device adopting closed-loop control method Equipped with a unique Ethernet communication (TCP/IP protocol) interface, it allows for easy implementation of many functions in CypCut, such as automatic height tracking, segment piercing, progressive piercing, edge seeking, skipping, and arbitrary setting of lift-up height.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL1325LC (Low Power Type) ■ Medium and Small Fiber Laser The optical parts are designed to be resistant to dust accumulation. It features a cam structure for precise focus adjustment. The drawer includes a protective lens that is easy to replace. ■ au3tech System A perfect solution for all types of encryption issues. The rich fiber laser cutting processes and parameters enhance the quality of the cutting effect. ■ Double Control with Two Thermometers Cooling of the laser source and laser head is achieved with two water temperature displays and two water pressure gauges.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015E (Low Power Type) ■ Simple autofocus that does not require manual operation The dedicated software automatically adjusts the focusing lens, allowing for automatic drilling and cutting even with plates of varying thickness. The speed at which the focusing lens is adjusted automatically is ten times faster than manual adjustment. ■ Aerospace aluminum gantry Manufactured to aerospace standards and formed by 4300 tons of press extrusion. After aging treatment, the strength can reach T6, which is the maximum strength for all gantries. Aerospace aluminum has many advantages, including good toughness, lightweight, corrosion resistance, oxidation prevention, and low density, significantly improving processing speed.

• Laser marker
• Other processing machines

RSD-SUNMAX-FL1390 (Low Power Type) ■ Safe and Pollution-Free Structure Sealed body design. The observation window uses laser protection glass that meets European CE standards. Additionally, smoke and dust generated during cutting are filtered and expelled from the interior. ■ Simple Autofocus that Does Not Require Manual Operation The dedicated software automatically adjusts the focusing lens, enabling automatic perforation and cutting even with plates of varying thickness. The speed at which the focusing lens is adjusted automatically is ten times faster than manual adjustment.

• Other processing machines
• Other markings

RSD-SUNMAX-FL3015LN (Medium and High Power Type) - Various options to support flat cutting - Supports multiple fiber connections - High temperature resistance and plasma height adjustment - Convenient focus adjustment design - Accurate centering adjustment design

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015CN (Medium and High Power Type) Fiber Laser Cutting Machine

• Other processing machines
• Laser marker

RSD-SUNMAX-FL4020C / 6025C (Medium and High Power Type) This is a large fiber laser capable of high-speed and high-precision processing.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015P (Medium to High Power Type) The FL3015P features an enclosed design, allowing smoke generated during cutting to be filtered internally. The observation window uses laser protective glass that meets European CE standards. The material can be replaced through the door on the side of the machine. With the installation of a night vision camera, it is possible to observe the processing conditions inside.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015/4020/6025GA (High Power Type) ◆ Safe and Non-Polluting The FL3015P features an enclosed design, allowing smoke generated during cutting to be filtered internally. The observation window uses laser protection glass that meets European CE standards. ◆ Auto-Focus Cutting Easy-to-use simple automatic focus. Adjusts the focus lens to control the height up and down. ◆ Pad-Type Display The screen is easy to read and features both vertical and horizontal display options for user-friendly operation. It uses a glass panel made of iron, making it sturdy and durable. ◆ Equipped with a night vision camera, it is possible to observe the internal processing conditions.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL6025GT (High Power Type) The FL6025GT has a similar appearance to the GA series and features a two-tier exchange platform. The design encloses the body, allowing smoke generated from cutting to be filtered internally. The observation window uses laser protective glass that meets European CE standards. The difference from the GA series is that the GT series uses fire-resistant bricks in the frame to withstand high power. The work table is also designed to be more durable.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL60M (Dedicated Machine for Pipe Processing (Rotary Processing)) ● The FL60M features electric clamps (fixing devices) on both sides. It can automatically adjust the center, with an adjustable range for diagonal settings from 20 to 200mm. ● It has freely controllable clamp pressure for easy operation. It employs a wireless control device that can reduce pipe deformation. ● It adopts an intelligent pipe support design that can solve deformation issues during the cutting process of long pipes.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL1800 3D Fiber Laser Cutting Machine ● The FL1800 enables cutting of all 3D graphics. ● By using flexible optical fibers as the transmission medium, there are no limitations on the movement of the laser. ● The focus operation and high-speed movement are highly precise, allowing for high-performance cutting capabilities. ● It enhances the operator's labor efficiency and reduces work costs and labor expenses.

• Laser marker
• Other industrial robots
• Other processing machines

RSD-SUNMAX-FL3015CNR (Pipe processing (rotary processing) attached type) It can cut not only metal sheets but also metal pipes. This is a standard model with pipe processing (rotary processing) attached type. It is equipped with a fixed platform and can support up to 8000W.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015GCR (Pipe processing (rotary processing) auxiliary type) The L3015GCR is a model equipped with an automatic exchange platform based on the FL3015CNR. It has a platform replacement function, making continuous processing easy. *Please note that a large installation area is required for platform replacement. Please check the external dimensions.

• Other processing machines
• Laser marker

RSD-SUNMAX FL3015GAR (Pipe Processing (Rotary Processing) Attached Type) The FL3015GAR is a model that covers the FL3015GCR with a casing. Like the GCR, the FL3015GAR is equipped with a pipe cutting rotary processing machine and features a cover that encloses the body, making it a model from the GA series with pipe cutting attachment. It adopts a two-tier exchange platform. The converter controls the replacement motor. The platform exchange can be completed within 15 seconds. The design encloses the body, allowing smoke generated from cutting to be filtered internally. The observation window uses laser protective glass that meets European CE standards.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL3015LNR (Pipe processing (rotary processing) auxiliary type) The FL3015LNR is an entry model that simplifies the structure and components of the FL3015CNR, capable of handling up to 3000W. The FL3015LNR can cut not only metal sheets but also metal pipes.

• Other processing machines
• Laser marker

RSD-SUNMAX-FL-LCW (Fiber Laser Welding, Cutting, and Rust Removal Machine) The fiber laser welding machine, RSD-SUNMAX-FL-LCW, is a multifunctional laser welding machine that can perform welding, cutting, and cleaning (such as rust removal) on metal materials by exchanging the laser gun attachment. - It achieves uniform welding results due to stable laser output. - High-density laser focusing enables powerful output. - It processes quickly and more deeply, minimizing the impact at the convergence point of high density. - The exchange of the laser head attachment can be done easily in about 15 seconds, allowing for immediate adaptation to changes in processing requirements. - It is easy to operate, so even those with no welding experience can use it after just a few hours of practice.

• Welding Machine

Fiber Laser Welding Machine The RSD-SUNMAX-FL-welding adopts the latest fiber laser technology. Compared to conventional hard light output systems, it improves processing flexibility and enables more precise welding. It features easy operation, beautiful weld seams, fast welding speeds, and is maintenance-free with no consumables. It is capable of welding thin stainless steel plates, iron plates, and conductive metal materials. It also accommodates arc welding, electric welding, and other processes. The RSD-SUNMAX-FL-welding can be used in a wide range of applications, including kitchen cabinets, stair lifts, shelves, ovens, stainless steel doors and window guardrails, distribution boxes, and complex stainless steel products.

• Welding Machine