Announcement of advertisement publication in the November 2022 issue of "Machines and Tools: Special Feature on Exhibited Products at the Japan International Machine Tool Fair JIMTOF 2022."

Cleaning the coolant tank that used to take a whole day is now done in just 10 minutes! Improving cleaning efficiency and reducing unpleasant odors contribute to environmental enhancement!

The automotive manufacturer Company I had three people cleaning the coolant tanks of machine tools, which took almost a whole day and had become the norm (standard operation). Therefore, we introduced 'APDQO-F'. It can be operated by one person, and the work time was remarkably improved to about 10 minutes. Additionally, for machine tools that were difficult to manage, we had been outsourcing the work, which incurred costs. However, after the introduction, we were able to perform the work in-house, resulting in cost savings. 【Solution】 ■ APDQO-FF Non-woven fabric filter type for drum cans - Replaceable non-woven fabric, disposable type ■ APDQO-FS SUS filter type for drum cans - The filter is made of stainless steel, allowing for repeated use *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used for the following purposes: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FS (Stainless Steel Filter) APDQO-FF (Non-woven Fabric Filter) APDQO-FB (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe with no electric leakage due to air drive ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools and filtering and separating both "liquids" and "solids." Therefore, in addition to filtering chips and sludge from machine tools, it can also be used for the following purposes: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in wastewater at food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• Filtration Equipment

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual function for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Last month, we held a spring safety conference hosted by our company. We have compiled the details and atmosphere of the day into a PDF. We would appreciate it if you could take a moment to read it.

In recent years, as the importance of data integrity (DI) compliance in GMP environments has increased, there has been a growing call to deepen understanding of 21 CFR Part 11. This content introduces an on-demand presentation that organizes the background of Part 11, its relationship with DI, and its positioning in CSA guidance, while explaining the basic concepts of electronic records and electronic signatures. ■Content - Background and basic concepts of Part 11 - Relationship with data integrity (DI) - Positioning in CSA guidance - Basic requirements for electronic records/electronic signatures *This content is based on information as of March 17, 2026. *The information provided is intended for general informational purposes and does not guarantee specific compliance or suitability.