We solve on-site problems! We accept small lot orders for complex shape adhesive paper cuts tailored to the parts during assembly.

On-site problem solving! We will sell complex shape cuts of adhesive paper in small lots. We also accept orders for different shapes and the same shape.

I believe there are many companies that cut adhesive paper used for assembling parts on-site with cutters and other tools. If the shape is straight, it can be cut with a cutter even if it takes time. However, cutting curved or round shapes with a cutter is very difficult. For our company, processing adhesive paper to be applied to the back of nameplates for machine tools was a significant issue. It often took time, and there were instances where it didn't go well, resulting in wasted material due to curling. As a solution, we started laser cutting the adhesive paper, which allowed us to handle complex shapes and improve efficiency. I believe there are other sites facing similar challenges. Let us take care of your adhesive paper cutting and help solve your problems. We offer small lot sales. Please contact us for more details.

• others

Small lot orders are possible in the size of 200mm x 300mm! It is also possible to deliver various different items on a single sheet, allowing for cost reduction.

The adhesive paper used for bonding and assembling parts needs to be cut to match the parts, but for small lots, it is often processed on-site. However, depending on the shape of the parts, it can be difficult to process circular or curved shapes manually, which may lead to time loss and waste of adhesive paper. Our company's adhesive paper complex shape cutting technology was developed through the actual processing of adhesive paper used in-house. Compared to manual cutting, we have significantly reduced time and waste, leading to a reduction in the workload on-site. Additionally, depending on the quantity of assembled products, there are often cases where a small lot of various types of adhesive paper is needed rather than a large quantity. Our company can accommodate mixing and placing as many different types as possible within a 200mm x 300mm space. This achieves a reduction in the workload on-site.

• others

Since we can accept orders starting from a small lot of one sheet measuring 200mm x 300mm, we can produce the desired shapes in the desired quantities using our complex adhesive paper cutting technology.

Our company's complex shape cutting technology for adhesive paper can achieve the following: - It reduces the workload of those currently cutting adhesive paper by hand, improves precision, and minimizes waste of adhesive paper and time that often occurs with manual work. - It allows for ordering the necessary number of pieces to fit into a single sheet of 200mm x 300mm. Additionally, it is possible to combine different shapes, such as various types of products, within a single sheet. - Since it uses laser cutting, there is no need to create molds like with traditional die-cutting, which helps to keep costs down. These are the advantages mentioned above. Furthermore, we use adhesive paper made by Nitto Denko, and we can change the adhesive paper cut according to the application. Please refer to the PDF for pricing and other details. Feel free to contact us for more information. If desired, we can also provide sample products (limited quantity).

• others

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will be exhibiting our products at "JECA FAIR 2026 (the 74th Electrical Construction Exhibition)" held at Tokyo Big Sight. At this exhibition, we will be jointly exhibiting with Mibu Electric Manufacturing. Our booth will focus on the "Panel Manufacturing Skill-less Solution," which addresses the labor shortage issues in panel manufacturing that have required skilled workers, enabling less experienced operators to achieve high-quality manufacturing in processes such as wire processing, component assembly, and wiring work. We will also introduce various other products. We invite you to visit our booth during your visit. ■ Exhibition Name: JECA FAIR 2026 (the 74th Electrical Construction Exhibition) ■ Location: Tokyo Big Sight, Halls 1-3 ■ Booth Numbers: 1-01 ECAD Solutions, 1-02 Joint Exhibition with Mibu Electric Manufacturing ■ Dates: May 27 (Wednesday) - May 29 (Friday), 2026, for three days ■ Hours: May 27 (Wednesday) 10:30 AM - 5:00 PM May 28 (Thursday) 10:00 AM - 5:00 PM May 29 (Friday) 10:00 AM - 4:30 PM *For more information about the exhibited products, please download the materials. Feel free to contact us with any inquiries.

We would like to express our gratitude for your continued support and announce a campaign where you can purchase consumables at a great price. We will offer various consumables that need to be replaced regularly for high-precision and stable analysis, as well as safe decomposition work, at a special price of 20% off. For more details, please refer to each leaflet.

We will be temporarily closed on the following dates due to employee training. We apologize for any inconvenience this may cause and appreciate your understanding. ■ Closure Period June 11 (Thursday) to June 12 (Friday), 2026, all day ■ Regarding Orders 1) Orders placed after June 10 (Wednesday) will generally be shipped on or after June 16 (Tuesday) or June 17 (Wednesday). 2) Orders can be placed anytime on the 【FOSS WEBSHOP】. The official delivery date will be communicated after June 15 (Monday). 3) Please specify your "desired delivery date" when placing an order. 4) In case of emergencies, please contact us not only by sending the order form but also by phone. ■ Regarding Customer Support During the closure, any malfunctions or issues will be accepted via email or voicemail. Please provide detailed information including "model name," "serial number," "symptoms," "contact person's name," and "contact information." Our customer support will contact you in the order of receipt. E-Mail: service@foss.co.jp Contact: 03-5962-4811 Reception Hours: 9:00 AM to 5:00 PM