■■Notice■■■ The National Slope Disaster Prevention Association held its 28th General Meeting.■■■

Obtained VE through NETIS registration! A simple spraying method framework for creating green slopes and disaster prevention, preventing washout and surface erosion of slopes and embankments, and preventing surface peeling!

The Easy Shelf Method is a simple spraying frame construction that can be adopted when it is determined that the conventional site-sprayed frame construction standards are excessive. It is positioned as a greening foundation work, preventing scouring and surface erosion of slopes and embankments, stabilizing the surface layer and the underlying material. Recently, it has obtained VE certification from NETIS (NETIS number: KK-160021-VE). The Easy Shelf Method features a frame that is flexible and easy to construct, allowing for the preservation and restoration of green spaces. The benefits of retaining trees include environmental conservation and the reinforcement effect of tree roots, which can also help prevent avalanches. It is advisable to keep trees such as oaks, chestnuts, and beeches, while it is better to cut down planted cedars, dead trees, and trees with poor vitality. A major feature is that the frame is a site-cast sprayed frame, using only rebar and metal fasteners (glass stands) for the frame structure, which improves workability and shortens construction time compared to conventional sprayed frame construction. 【Features of Glass Stand】 - The punched steel plate structure is strong against deformation from external forces. - Reduces the occurrence of cracks after spraying. - The abundance of openings and cuts eliminates mortar edge separation, making it easy to bind and enhancing workability. - Can be stacked for easy transportation.

• others

Due to its steel plate punching structure, it is strong against deformation caused by external forces and exhibits an extremely high holding capacity in relation to the rebar position! *It will be exhibited at the Wakayama Prefecture Ken Sanpin.

The "Easy Shelf Construction Method Sanbo Type" uses three rebar. It's called "Sanbo" because it has three bars. The Easy Shelf Construction Method Sanbo is designed with a punched steel plate structure, making it strong against deformation caused by external forces and demonstrating extremely high retention capability against the specified rebar positions. It can be stacked for easy transport, which also enhances work efficiency! NETIS Registration Number: KK-160021-VE ＊＊＊＊ Easy Shelf Construction Method Sanbo Type Registered Product in Wakayama Prefecture; Registration Number: R03-1237 *For more details, please refer to the PDF or contact us.

• Other consumables
• others

The Easy Shelf method for simple spraying can be utilized as a countermeasure against the frequent short-duration heavy rains occurring recently!

The Easy Shelf Method, promoted by the National Slope Disaster Prevention Association, which is managed by K.F. Corporation, can be utilized as a countermeasure against the recent frequent short-duration heavy rains! 【Countermeasure Situations】 1. As a measure against erosion and collapse of slopes due to surface water: Easy Shelf Method + Vegetation within the frame 2. As a measure against sliding collapse due to infiltrating water: Easy Shelf Method + Mortar spraying within the frame 【Comparison with Precast Grid Frames】 1. All beams are continuous, increasing resistance to ground collapse. 2. Surface water can be smoothly drained. 3. It is closely attached to the ground, making it less susceptible to erosion. 4. It is expected to have a surface collapse prevention effect.

• others

It's called "Sanbo" because it's three bars! It's a simple spraying method framework using three rebar!

This is a type that uses three rebar for the Easy Shelf method of simple spray application frame construction. The Easy Shelf method is conducted under an association system, but if you are considering joining the association in the future, it is also possible to sell it in the form of a trial construction. NETIS Registration Number: KK-160021-VE 【Simple Spray Adhesive Frame - Easy Shelf Method Sanbo Type】 1. The punched steel plate structure is designed to be strong against deformation caused by external forces and exhibits an extremely high holding capacity against the specified rebar positions. 2. It can be stacked for transportation, improving work efficiency. For more details, please contact us or download the catalog.

• others

Extremely high holding capacity for the rebar position in the simple spray application formwork!

This is a glass stand type that uses four rebar bars for the Easy Shelf Method, which aims to create green slopes and disaster prevention. NETIS Registration Number: KK-160021-VE **Features of the Easy Shelf Method Power Stand:** 1. The punched steel plate structure is designed to be strong against deformation caused by external forces, demonstrating an extremely high holding capacity in relation to the specified rebar positions. 2. It can be stacked for easy transportation, enhancing work efficiency. **Features of the Easy Shelf Method Glass Stand:** 1. The glass stand, with its punched steel plate structure, is strong against deformation caused by external forces and exhibits an extremely high holding capacity in relation to the specified rebar positions. 2. The outer dimensions of the glass stand are designed to ensure that all parts maintain a cover of 40 mm, which helps reduce the occurrence of cracks after spraying. 3. The glass stand features numerous openings and cuts that eliminate mortar edge cutting, making it easy to bind and excellent in workability. The glass stand can be stacked, making it easy to transport.

• Other consumables
• others

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

Would you like to have that product certified as "Accredited calibration"? Our company conducts calibration of pressure category "leak gauges" as a registered business under the Measurement Law Calibration Business Registration System (JCSS). Additionally, we are accredited by the Japan Accreditation Board (JAB) as a calibration organization compliant with the international standard ISO/IEC 17025, and we perform calibration of "flow rate," issuing calibration certificates with symbols. Fukuda is an accredited calibration organization compliant with international MRA.