【Analysis Know-How.com】μ-EXCEL data from the video site is now available for download!

Publication of an explanation of vector magnetic characteristic analysis technology for the realization of high-efficiency motors!

This document explains the vector magnetic characteristic analysis technology for achieving high-efficiency motors. This technology is supported by Professor Masato Enokizono (Emeritus Professor at Oita University, currently the representative of the Vector Magnetic Characteristic Technology Research Institute), and we have cited information from the Vector Magnetic Characteristic Technology Research Institute, which is headed by the professor. [Contents] 1. The target is the reduction of iron loss in electromagnetic steel sheets. 2. Iron loss is the sum of eddy current loss and hysteresis loss. 3. Vector magnetic characteristics of electromagnetic steel sheets. 4. Conventional measurements are scalar magnetic measurements. 5. Developed vector magnetic measurements. 6. Actual measurement results. 7. Database creation as magnetic characteristics. *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

Supports low loss and high efficiency of EV motors! Capable of analyzing rotating magnetic fields and hysteresis.

"μ-E&S" is a loss analysis software that can simulate the distribution of magnetic flux density, magnetic field, and iron loss based on actual measurements of motor laminated iron cores. By analyzing vector magnetic characteristics, it can identify areas where iron loss occurs significantly, making it a useful tool for the miniaturization, lightweighting, low loss, and high efficiency of motors. 【Features】 ■ High-precision calculation of magnetic vectors ■ Capable of calculating rotating magnetic fields and hysteresis ■ Equipped with permanent magnet excitation function and torque calculation function *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Magnetic field analysis/electromagnetic wave analysis

Publication on vector magnetic characteristic analysis technology for achieving high-efficiency motors!

This document is a technical column edited and compiled based on the content related to "Vector Magnetic Characteristic Analysis" mentioned in past newsletter columns. We would like to disseminate information about the importance of vector magnetic characteristic analysis technology for achieving high-efficiency motors. [Contents] ■1. Vector Magnetic Characteristic Analysis Technology - Prologue - ■2. Top Runner Method and IE4 ■3. Inverter Technology and Energy Saving ■4. Will Increasing Size Lead to IE3? ■5. Electrical Steel Sheets are Excellent ■6. Focus on the Vector Magnetic Characteristics of Electrical Steel Sheets *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

A comparison of the magnetic field and iron loss distribution of IPM (Interior Permanent Magnet) motors using vector magnetic characteristic analysis and conventional method analysis!

This document presents an analysis example aimed at comparing the magnetic field and iron loss distribution of IPM (Interior Permanent Magnet) motors using vector magnetic characteristic analysis and conventional method analysis. It provides a detailed explanation of the analysis model and objectives, as well as the results of magnetic flux lines, magnetic field distribution, and iron loss distribution. 【Contents】 ■5.1 Analysis Model and Objectives ■5.2 Analysis Conditions and Calculation Time ■5.3 Magnetic Flux Lines, Magnetic Field Distribution, Iron Loss Distribution Results ■5.4 Comparison with Conventional Methods ■5.5 Results of Angle θB and Aspect Ratio α Distribution ■5.6 Hysteresis Curve and Lissajous Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

A basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet Motor) is presented!

This document presents a basic analysis example aimed at the iron loss distribution of SPM (Surface Permanent Magnet) motors. It provides a detailed explanation of the analysis model and objectives, as well as the magnetic flux lines, magnetic field distribution, and iron loss distribution results. [Contents] ■4.1 Analysis Model and Objectives ■4.2 Analysis Conditions and Calculation Time ■4.3 Magnetic Flux Lines, Magnetic Field Distribution, Iron Loss Distribution Results ■4.4 Results of Inclination Angle θB and Aspect Ratio α Distribution ■4.5 X-Direction Hysteresis Curve Results ■4.6 Y-Direction Hysteresis Curve Results ■4.7 Lissajous Waveform Results ■4.8 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

An example of analysis using a transformer model with directional materials is published!

This document presents an analysis example using a transformer model with directional materials. It provides a detailed explanation of the analysis model and objectives, as well as the results of magnetic flux lines, magnetic field distribution, and iron loss distribution. [Contents] ■3.1 Analysis Model and Objectives ■3.2 Analysis Conditions and Calculation Time ■3.3 Results of Magnetic Flux Lines, Magnetic Field Distribution, and Iron Loss Distribution ■3.4 Results of Angle θB and Aspect Ratio α Distribution ■3.5 Results of Hysteresis Curve in the X Direction ■3.6 Results of Hysteresis Curve in the Y Direction ■3.7 Results of Lissajous Waveform ■3.9 Results of Current Waveform *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

An example of analysis using a model of non-oriented electrical steel sheet formed into a ring shape is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel sheets shaped into a ring. It provides detailed explanations on various topics, including the ring model voltage source (differences in steel materials), magnetic field distribution, and iron loss distribution results. [Contents] ■2.1 Analysis Model and Objectives ■2.2 Analysis Conditions and Calculation Time ■2.3 Magnetic Field Distribution and Iron Loss Distribution Results ■2.4 X-Direction Hysteresis Curve Results ■2.5 Y-Direction Hysteresis Curve Results ■2.6 Current Waveform Results *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

An example of analysis using a model of non-oriented electrical steel sheet shaped into a ring is presented!

This document presents an analysis example using a model of isotropic electromagnetic steel plates shaped into a ring. It provides a detailed explanation of the ring model voltage source, as well as comparison results with measured values of the hysteresis curve. 【Contents】 ■1.1 Analysis Model and Objectives ■1.2 Analysis Conditions and Calculation Time ■1.3 Magnetic Field Distribution and Iron Loss Distribution Results ■1.4 Alternating Magnetic Flux and Rotating Magnetic Field Results ■1.5 Comparison Results with Measured Values of the Hysteresis Curve ■1.6 Current Waveform Results ■1.7 Interface Settings Screen *For more details, please refer to the PDF document or feel free to contact us.

• PM motor

Aiming for low loss, accurately measure the actual state of electromagnetic materials and understand and analyze their vector magnetic properties! Supporting low loss and high efficiency for EV motors and more.

This is an introduction to the next-generation iron loss evaluation method, the "E&S Model." Based on an evaluation method called vector magnetic characteristics, it has become possible to obtain a more detailed analysis of the loss distribution in steel materials compared to conventional methods. It can calculate high-precision magnetic fields, magnetic flux densities, and iron loss distributions that are not achievable with other software. 【Features】 - By considering vector magnetic characteristics, magnetic vectors can be calculated with high precision. - It can compute rotating magnetic fields and hysteresis. - It is designed as an easy-to-use tool specifically for iron loss evaluation. - It includes permanent magnet excitation functionality and torque calculation functionality. *For more details, please contact us or download the PDF.

• Magnetic field analysis/electromagnetic wave analysis

Aiming for low loss, accurately measure the actual state of electromagnetic materials and grasp and analyze their vector magnetic characteristics!

Iron loss evaluation, which has been a bottleneck in motor analysis. Conventional methods only consider iron loss as a function of magnetic flux density, resulting in low accuracy. However, accurately determining the magnetic field and magnetic flux density to calculate iron loss is achieved through "vector magnetic characteristic analysis." This allows for the calculation of high-precision distributions of magnetic fields, magnetic flux densities, and iron losses that are not achievable with other software. Vector magnetic characteristics refer to the properties that take into account the relationship between the magnetic field H and magnetic flux density B of electromagnetic steel materials, considering their direction (vector). The finite element method electromagnetic field simulator that incorporates this characteristic is “μ-E&S.” 【Features】 - High-precision calculation of magnetic field vectors is possible by considering vector magnetic characteristics. - Rotating magnetic fields and hysteresis can be calculated. - It is designed as an easy-to-use tool specifically for iron loss evaluation. *For more details, please request materials or view the PDF data available for download.

• Magnetic field analysis/electromagnetic wave analysis

We would like to introduce our product, "Cute 1.5 (One Point Five)." This product is a jacket tube with a rack lid lock and anti-rotation feature (compatible capacity 1.6ml). We offer a wide range of products, and those equipped with a rack ID function have a 2D code on the bottom and both a 1D barcode and alphanumeric information laser-engraved on the side corresponding to the bottom 2D code. [Features] ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

The low-voltage fuse "SBFC-M" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrent conditions. It is particularly effective for devices in automobiles where the current temporarily increases significantly. This low-voltage fuse is recommended for those facing challenges related to circuit protection in the automotive and construction machinery industries, as well as for low-voltage fuses (below DC 70V).

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.