SIGLENT Product Year-End Sale (until December 31, 2022)

High-performance lab tool equipped with advanced microwave technology and the latest digital processing algorithms!

Lineup: SSA3015X Plus / SSA3021X Plus / SSA3032X Plus / SSA3075X Plus SIGLENT Technologies' SSA3000X Plus is a powerful tool for RF signal and network analysis. The series features a frequency range of up to 7.5 GHz, highly reliable measurement capabilities, and multiple operating modes. Based on a spectrum analyzer, it can be equipped with optional functions such as RF power measurement, vector signal modulation analysis, reflection measurement, and EMI testing. It supports a wide range of applications including specialized research, testing, measurement, analysis, R&D, education, production, and maintenance. ■ Frequency range: 9 kHz to 7.5 GHz (maximum in the series) ■ Displayed average noise level: -165 dBm/Hz (standard value, SSA3075X Plus) ■ Phase noise: -98 dBc/Hz @ 10 kHz offset (1 GHz, standard value, SSA3075X Plus) ■ Minimum resolution bandwidth (RBW): 1 Hz ■ Tracking generator standard included ■ 10.1-inch touchscreen

• Other electronic measuring instruments

High performance and rich features to accommodate a wide range of applications! SIGLENT Technologies' mid-range digital oscilloscope.

Lineup: SDS2104X Plus / SDS2204X Plus / SDS2354X Plus The SDS2000X Plus series is a high-performance oscilloscope that incorporates SIGLENT's SPO technology. It features a waveform frequency display function based on brightness and color temperature, a high-sensitivity, low-jitter digital trigger system, and a rich and powerful set of functions represented by diverse waveform recording and analysis capabilities. ■ Lineup of 100 MHz, 200 MHz, and 350 MHz (upgradeable to 500 MHz) ■ Maximum real-time sampling rate of 2GSa/s ■ Maximum memory length of 200 Mpts ■ Serial bus trigger & decode standard support: I2C, SPI, UART, CAN, LIN Options: CAN FD, FlexRay, MIL-STD-1553B, SENT, Manchester (decode only) ■ 10-bit mode, vertical & horizontal zoom ■ Capacitive touch screen supporting multi-touch gestures

• oscilloscope

The best-selling oscilloscope from SIGLENT Technologies that delivers high performance in both functionality and cost!

Lineup: SDS1202X-E / SDS1104X-E / SDS1204X-E SIGLENT's best-selling model "SDS1000X-E series" digital oscilloscope. Bandwidth of 100/200MHz, maximum sampling rate of 1GSa/s, maximum memory length of 14Mpts, available in 2/4 channel specifications. By adopting the latest SPO technology, it achieves a high-precision, low-noise system. It is equipped with many useful features for triggering and waveform acquisition/reference. It provides an excellent measurement environment along with a variety of automatic measurement functions and 1Mpts FFT calculations. It pursues ease of use through high-speed data processing and an intuitive user interface, delivering high performance in both price and functionality. ■ One-button access to frequently used functions ■ Display of waveform frequency with 256 levels of brightness gradation and color temperature ■ Standard equipped with serial bus trigger/decode functions ■ Sequence mode enabling waveform capture at 400,000 frames per second ■ The 4 ch model includes board diagrams and search & navigate functions For more detailed information, please refer to the catalog (data sheet) under product information.

• oscilloscope

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.