A structure and mechanism that does not impose a load on the product! "Tray to Tray Appearance Inspection Device"

A structure and mechanism that does not impose a load on the product! Capable of accommodating a variety of types with attachment switching.

The "TVM-2400" is an appearance inspection device that directly classifies and stores good products in the good product storage tray and defective products in the defective product storage tray. It automatically performs surface inspection on products stored in the supply tray, and then retrieves the products to conduct image inspection from the backside. By switching or replacing some attachments, the device can accommodate a variety of products. 【Device Specifications (Excerpt)】 ■ Power Supply: AC 200V ±10% (Three-phase) 50/60Hz Electric Capacity 2KVA ■ Air Source ・Compressed Air: 0.5Mpa approximately 100NL/min ・Vacuum: Built-in ejector ■ Device Weight: Approximately 1000Kg *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).