SincoTec "News Letter (January 2022)"

Fatigue testing machine for various components of EV (electric vehicles)

In recent years, the electrification of automobiles (EVs) has been advancing. Since they do not use an engine, they do not emit carbon dioxide while driving, making them top-class in environmental performance among eco-cars. In this context, SincoTec has a wealth of experience in fatigue testing for various EV components, primarily serving major automobile manufacturers in Europe. We would like to introduce our state-of-the-art fatigue testing machines from SincoTec. In addition to selling fatigue testing machines, we also undertake contract testing. *For more details, please refer to the PDF materials or feel free to contact us.*

• Testing Equipment and Devices

Radial load up to 100kN! Using our in-house developed control software "EMOTION".

"POWER ROTORQUE" is a fatigue testing machine that combines resonance and electric servo systems. It can handle radial loads of up to 100 kN. The torsional acceleration is ±6°, and the testing frequency goes up to 60 Hz. It also uses our proprietary control software "EMOTION." 【Advantages】 ■ Rotational testing with superimpose function, high-frequency radial and torsional amplitudes ■ Combination of radial load + alternating torsional amplitude (asynchronous operation) ■ Combination of 4-point bending + alternating torsional load (asynchronous and synchronous operation) ■ Radial load / axial load up to 1 MN: 20 kN ■ Radial frequency / torsional frequency up to 60 Hz: 25 Hz ■ Option: Oil conditioning *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

Twist moment load fatigue testing machine!

"Torsion Moment Fatigue Testing Machine 'POWER TORSION'" Testing Applications: Powertrain, Transmission, Drive Shaft, Crankshaft, Gearbox Strain Assemblies, etc. ■POWER TORSION (Resonance Type) - Energy-saving, high testing frequency load, short testing time - High precision crack detection - Resonance-driven testing system for fatigue strength analysis - Dynamic testing with average load selection - Torsion moment: up to ±30,000Nm ■POWER TORSION static (Electric Servo Type) - Electric servo-driven testing system for static failure testing - Maximum torque: up to ±8,000Nm ■POWER TORSION dynamic (Hydraulic Servo Type) - Hydraulic servo-driven testing system for operational load testing - Torsion moment: up to ±8,000Nm (static average load) up to ±4,000Nm (static load) - Large torsion angle: ±50° *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Introducing the torsion testing machine "POWER TORSION" and the 2-axis (twisting and bending) testing machine "POWER TORBEN."

■Twist Testing Machine 'POWER TORSION' 〈Features〉 　✓ Resonance type (electromagnetic drive) twist fatigue testing machine 　✓ Rated load: up to ±6,000Nm 　✓ Testing frequency: 10 to 60Hz 　✓ Maximum twist angle up to ±22.5° < Advantages> 　✓ Average load selectable with or without 　✓ Twisting load with tensile R ratio possible 　✓ Static torsion testing possible 　✓ Winding moment possible 　✓ Torsion moment up to 20,000Nm also possible Additionally, we also offer a two-axis (twist and bend) testing machine 'POWER TORBEN' with a testing frequency of 100Hz, torsion moments of 6kNm, 40kNm, 400kNm, and bending moments of 4kNm, 20kNm, 200kNm. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

Would you like to shorten the research and development time using a "resonance fatigue testing machine" based on the principle of resonance? Fatigue testing is not limited to hydraulic and electric types.

Fatigue testing machines for automobiles, railways, aviation, universities, and research institutions! Would you like to shorten your research and development time with the high-precision resonant fatigue testing machine "POWER SWING," which utilizes the principle of resonance? Moreover, not only in production equipment but also in testing machines, the rising electricity costs are increasingly burdening the running costs. The SincoTec resonant fatigue testing machine is highly effective for energy saving. Supports tensile, compression, rotation, bending, twisting, and internal pressure fatigue testing: ✓ Reduced testing time and energy saving ✓ High-frequency loading with low energy consumption due to resonance ✓ High-precision detection of micro-cracks as small as 10μm ✓ No hydraulic mechanism in resonant systems = no worries about oil leaks ✓ The MOT (motor-driven) resonant drive system is unique to SincoTec worldwide Of course, we can also accommodate hydraulic servo and electric servo systems depending on the testing conditions. *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Patent held! Suitable for material and component testing, especially tests requiring clearance.

The "POWER SWING MOT (Motor Driven) Series" is a resonance-type fatigue testing machine for materials and components with a test load range of 1 to 2000 kN. The test frequency ranges from 30 to 120 Hz, with a maximum amplitude of 12 mm. It is particularly suitable for material and component testing, especially for tests that require clearance. It is also suitable for low cycle fatigue (LCF) testing. 【Mechanism of the MOT (Motor Driven) System】 ■ Operates at frequencies below the resonance peak ■ Changes primary excitation based on the square of the drive speed ■ Varies the excitation frequency to change the amplitude ■ Adjusts the output amplitude using the excitation frequency *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Static and dynamic testing is possible! It is far more energy-efficient than hydraulic methods and can test internal pressure resistance in a short time.

The "POWER SWING MOT Internal Pressure" is an internal pressure load fatigue testing machine with a maximum pressure of 3000 bar (300 MPa). The rated load is 100 kN and 400 kN, with a maximum testing frequency of 40 Hz. We use our proprietary control software "EMOTION." Additionally, it is possible to add environmental condition simulations such as vibration excitation and temperature environments. 【Advantages】 ■ Capable of manufacturing internal pressure load testing machines up to 4000 bar (400 MPa) ■ Significantly more energy-efficient than hydraulic systems - Energy consumption: 4 kW for high-frequency loads (depending on testing conditions, etc.) ■ Can inspect internal pressure resistance in the shortest time possible ■ Environmental condition operation simulations can be added (vibration excitation, temperature environments, etc.) *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Energy-saving with quick testing! Real load control of maximum distortion amplitude is possible.

The "POWER ROTATING BENDING" is a rotating bending testing machine with a bending moment range of 2,000 to 350,000 Nm. The testing frequency is 10 to 80 Hz. We use our self-developed control software "EMOTION." Additionally, with the built-in calibration device, static-dynamic comparative measurements can be easily performed. 【Advantages】 ■ Energy-efficient and fast testing ■ Visualization of technical cracks ■ Real load control of maximum strain amplitude ■ Easy static-dynamic comparative measurements with the built-in calibration device ■ Testing according to DIN EN 13260, 13261, 13262 (for railway use) *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Maximum amplitude is 6mm! A system suitable for ultra-high cycle fatigue (VHCF) testing.

The POWER SWING MAG (Electromagnetic Drive) series is a resonant fatigue testing machine suitable for material test specimens and axial test specimens. The test load ranges from 5 to 550 kN, with a maximum amplitude of 6 mm. It is a system suitable for ultra-high cycle fatigue (VHCF) testing. Please feel free to consult us regarding testing methods, conditions, and objectives. 【Mechanism of MAG (Electromagnetic Drive)】 ■ Operates at the system's resonant frequency at all times ■ Amplifies to the maximum ■ Controls the output amplitude by varying the excitation frequency ■ Excitation frequency *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

Shorten development research time! Lineup for vehicle springs, industrial springs, and leaf springs.

"POWER SPRING" is a spring testing system compatible with various types of springs. It uses our proprietary control software "EMOTION." We offer "POWER AXLE SPRING" for vehicle springs, "POWER INDUSTRIAL SPRING" for industrial springs, and "POWER BOW SPRING" for leaf springs. 【Features】 ■ Resonance-type fatigue testing machine ■ Compatible with various springs ■ Uses our proprietary control software "EMOTION" *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

Would you like to shorten the development research time with a high-precision "resonance-type" fatigue testing machine?

The SincoTec fatigue testing machine can conduct high-precision tests with high test loads and high test frequencies for compression/tension, torsion, bending, rotation, and internal pressure testing. Its most notable feature, the "resonance-type" fatigue testing machine, is a top manufacturer in the world and is known for its time-saving, energy-efficient, and high-precision testing capabilities. The advantages of the resonance type are as follows: 1. Resonance type: Motor-driven (MOT) type, electromagnetic-driven (MAG) type / dynamic and static testing * The MOT method is unique to SincoTec in the world and is patented. 2. High precision detection of micro-cracks as small as 10μm using proprietary control software. 3. High test loads (1 to 2000 kN) and high test frequencies (standard 300 Hz, maximum 1100 Hz). 4. Compared to hydraulic systems, testing time is reduced by up to 1/10 and testing costs by up to 1/20. 5. Simple structure with low maintenance. No worries about oil leaks due to the absence of hydraulic mechanisms. No need to regularly replace consumables such as hydraulic oil and oil filters. 6. Over 30 years of experience with more than 4,000 units sold worldwide. 7. Custom machine production is possible according to customer requests. Hydraulic, electric, and compression testing machines are also available.

• Testing Equipment and Devices

Significantly reduced exam time! A lineup of products with motor drive and electromagnetic drive methods *Case studies available!

The "POWER SWING series" is a resonance-type fatigue testing machine that applies repeated loads based on the principle of resonance. We offer two types: - Motor-driven (MOT) system with a load range of 1kN to 2000kN and a testing frequency of 30 to 120Hz - Electromagnetic-driven (MAG) system with a load range of 5kN to 550kN and a testing frequency of 30 to 500Hz Starting with the cost-effective "POWER SWING" series, we have a wide variety of options suitable for testing parts and material samples. 【POWER SWING Features】 - Fast testing, energy-efficient, high-precision crack detection - Significant reduction in testing costs - Sturdy and high quality - Rated load: 1 to 2,000kN, high testing frequency: 30 to 500Hz - No hydraulic unit required = no worry about oil leaks - Proprietary software: EMOTION Customization for specific part applications is also possible. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The control system is "Test Pilot"! A lineup of 5 electric servo and hydraulic servo testing machines.

We would like to introduce our electric servo and hydraulic servo testing machines, 'POWER FLOW/POWER DRIVE.' In particular, we offer products such as the "POWER DRIVE direct-drive specification" for micro movements, the one-axis "POWER DRIVE" with direct drive spindle actuators, and the flexible mechanism "POWER DRIVE multi axial." Additionally, we also provide the "POWER FLOW Biaxial" with an axial load of 125kN. 【Product Lineup】 ■ POWER DRIVE direct-drive specification ■ POWER DRIVE ■ POWER DRIVE multi axial ■ POWER DRIVE torsion ■ POWER FLOW Biaxial *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Would you like to shorten development time with a high-precision "resonance-type" fatigue testing machine? We introduce a variety of products from SincoTec.

We would like to introduce examples of achievements using the electric and hydraulic servo fatigue testing machines manufactured by SincoTec. Starting with the "2-axis steering column testing machine" capable of dual rotary drive, we also have numerous achievements including the "3-axis testing machine for composite leaf springs" with flexible adjustments, as well as the "4-point rotational bending testing machine" and "stabilizer testing machine/spring testing machine." In the PDF document below, we also introduce a wide range of other products, so please take a look. 【Examples of Achievements (Partial)】 ■ 2-axis testing machine ■ 3-axis testing machine ■ 4-point rotational bending testing machine ■ Multi-axis hydraulic testing machine *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.