Notice of advertisement publication in the Nikkan Kogyo Shimbun "New Year Kyoto-Shiga Industry Special Feature" January 30, 2023 issue.

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with a non-oil air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from according to the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-oil air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0 to 60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed with air valve throttling ● Stable construction, difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction, difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling required with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor capable of continuous operation, suitable for use in explosion-proof areas. ◎ An essential item for explosion-proof and heat hazard areas! Ventilation for infection control! Because it is air motor-driven... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer failures! Can be used as a circulator. 《Applications》 ● Heatstroke prevention ● Infection control measures for COVID-19 and other diseases ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 5-40°C) *Please consult separately for other environmental conditions 《Field Use》 Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, replacing explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

Chemical plants, aircraft factories, shipyards, painting booths. For ventilation, air supply, and cooling of machinery in plants and explosion-proof areas, etc.

"Fan Series" AFR-18 (Fan diameter 450mm) [Discontinued] AFR-24 (Fan diameter 600mm) AFR-08NL (Fan diameter 200mm) AFR-12NL (Fan diameter 300mm) AFR-18NL (Fan diameter 450mm) ◎ Air motor factory fan that does not use electricity ◎ Standard equipped with air filter and lubricator ◎ Easy to operate "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas since the power source is air ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to topple "Features" ● Standard equipped with air filter and lubricator * Please use No. 32 lubricating oil. ● Duct hose can be attached as an option "Applications" ● Heatstroke prevention ● Efficiency improvement for drying work ● Ventilation and air blowing in narrow spaces such as manholes and tanks ● Connecting ducts for ventilation and air blowing in manholes ● Exhaust gas discharge for construction vehicles and heavy machinery ● Air circulation in high-temperature areas and drying rooms

• Other pumps

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no worries about breakdowns ◎Equipped with new features for greater convenience and easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For collection only (general oil, oils, metal shavings, etc.) ●Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no risk of failure ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-prone areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oils, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for on-site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner with wet and dry capabilities ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● JIS standard 20L open pail can (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Industrial Vacuum Cleaners

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Used not only in metal plating factories and semiconductor manufacturing but also in chemical plants, pharmaceutical warehouses, and other sites. Additionally, it is used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flames, please use the air-operated model (CHD1-20ASUS-N). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• Other pumps

Air-operated portable hand pump for kerosene and light oil, suitable for use in explosive areas, with both ends for drum cans and hoses.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in types for drums and hose connections "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

Air-operated portable hand pump for solvents / pump unit and drum can, suitable for use in explosive areas.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drum cans) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drum cans "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

A chemical pump that pursues reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume, non-pulsating ● Discharge only PSE (Electrical Appliance and Material Safety Law) compliant product PSE (Product Safety Law) compliant product, ensuring safety and security

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding the Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are present inside the nozzle).*

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• Other pumps

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, eliminating concerns about electric leakage ● Air motor type with high discharge volume, non-pulsating ● Designed exclusively for discharge **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

**EDO Series** - EDO-40 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50H (for oil, kerosene, diesel, and water / screw connection type) ◎ For emergency water supply pump ◎ Easy operation ◎ Standing action type **Benefits** ● Maximum discharge rate of 100L/min ● Powerful liquid transfer with 5m suction, 5m/7m/12m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing **Features** ● Manual, 100V power supply ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - CAC-CAC 15A to 50A (All brass / for water) - CAC-CAC JIS5K 15A to 50A (All brass / for water) - CAC-CAC JIS10K 15A to 50A (All brass / for water) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Suction performance of 6m (2.5m when dry) and discharge of 15m ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types available: with screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Additionally available in brass (for oil) and gasoline specifications

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - FC-CAC 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS5K 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS10K 15A to 50A (Brass for key parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types: screw-type flange and JIS standard round flange * No phase flange for JIS 5K type and JIS 10K type ● Separate brass for water and gasoline specifications available

• Other pumps

【All brass / water use】 Water absorption 6m (2.5m when dry) with a performance of 15m lift! Usable in places without power supply.

◎Emergency water supply pump ◎Liquid transfer ◎Material of the frame 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type phase flange and JIS standard round flange ※ No phase flange for JIS 5K type and JIS 10K type ● Separate options available for bronze (for oil) and gasoline specifications 《Set contents》 ● Frame: 1 unit ● Wing pump: available with 1 or 2 units ● Male couplings: 1 each for suction and discharge ※ Hose and female couplings are not included 《Regarding pipe orientation》 The wing pump cannot be used with the pipe orientation changed. Please install the suction side down and the discharge side up. The valve is designed to close under its own weight, and if placed sideways or upside down, the valve will not close, preventing liquid from being discharged. 《Difference between Yatsunami and King》 The King has a lower discharge volume compared to the Yatsunami. Additionally, the King does not have a round flange type or all-bronze type.

• Other pumps

Water absorption of 6m (2.5m when dry) with a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

"HWA Pump Series" - HWA-0 (Brass for key parts / for water) - HWA-2 (Brass for key parts / for water) ◎ For emergency water supply pump ◎ Liquid transfer ◎ Lightweight and compact 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Lightweight water wing pump ● Flange is screw type ● Body is made of aluminum casting

• Other pumps

Suction depth of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"King Wing Pump Series" - FC-CAC 15A to 50A (Brass for essential parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Screw-type phase flange included ● Essential parts made of brass only

• Other pumps

For dispensing AdBlue in locations without power, for refilling from a back-in-box.

"Ad-3 Series" Ad-3 (for AdBlue / battery-operated) Ad-3-100 (for AdBlue / electric) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Can be refilled in places without power or air ● No need to lift the box ● Can dispense approximately 26 boxes with 2 AA batteries "Features" ● For back-in-box use * Back-in-box sold separately ● Two types: battery-operated and 100V ● Comes with a 2.5m hose (hose extension is not possible) ● Includes a hand nozzle * Auto-stop function is not included.

• Other pumps

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Adopted for a project on the promotion, demonstration, and commercialization of advanced wastewater treatment facilities using the Indian national rotary fiber unit, a pilot plant with a capacity of 1000 m³/day will be constructed within a wastewater treatment facility in Bengaluru, South India. Verification will be conducted for one year starting from June 1, 2023, and will conclude on May 31, 2024. Throughout the year, all of India's stringent discharge standards will be met, and a wastewater treatment manual will be created and promoted in India.

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and can respond to various situations from passing to stationary. It can be used for the opening and closing of the input doors at waste treatment plants, as well as for gates where vehicles pass and in outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 - Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism. - Protection rating IP68 reduces the risk of water ingress. - Ten times the load capacity compared to conventional embedded park sensors (according to our comparison). - Can distinguish between vehicles even when they pass continuously, one by one. - Can be installed on rebar and steel plates. *For more details, please refer to the PDF document or feel free to contact us.