Notice of the article published in the February 5, 2023 issue of the Japan Machinery News "Special Feature on Equipment that Controls Air"

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge without waste ◎Discharge method can also be selected 《Advantages》 ●Minimal residual liquid (about 200cc), can discharge without waste ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

Pump for kerosene, light oil, and gasoline with a gun nozzle! Utilizes internal pressure with compressed air for transfer! Minimizes residual liquid, energy-saving, and safely allows for portioning of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and inhale liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. There are no obstacles in the flow path, so it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Last month, we held a spring safety conference hosted by our company. We have compiled the details and atmosphere of the day into a PDF. We would appreciate it if you could take a moment to read it.

In recent years, as the importance of data integrity (DI) compliance in GMP environments has increased, there has been a growing call to deepen understanding of 21 CFR Part 11. This content introduces an on-demand presentation that organizes the background of Part 11, its relationship with DI, and its positioning in CSA guidance, while explaining the basic concepts of electronic records and electronic signatures. ■Content - Background and basic concepts of Part 11 - Relationship with data integrity (DI) - Positioning in CSA guidance - Basic requirements for electronic records/electronic signatures *This content is based on information as of March 17, 2026. *The information provided is intended for general informational purposes and does not guarantee specific compliance or suitability.